my system is
ram: 8G
cpu: i3
system: windows 7
the files are small like 500mb
but the whole computer freezes when i m copying it to my harddrive
it's just too laggy that i couldnt even perform ctrl + alt + del.
Got a weird problem that happens when I try to copy files over my network to other PCs. It just freezes when I copy large files!
For example, I tried to copy the Windows beta ISO over to my 2nd computer and the computer just froze. I waited a few minutes but nothing happened so I had to press the reset button.
Is there anything I can do?
A few months ago,I bought an External Toshiba E.Store 3.5" 1.5 TB.I use it on Acer Aspire One-Netbook Processor Intel Atom1.66GHZ,2gb ram When I wanted to copy some files,regardless the amount of the files,or their capacitive,the copy just ended well.I use Teracopy.A bit after,my copy is just freezing.Netbooks is working well,ram was not at high percents,neither cpu.I had to open Task manager to close teracopy.Other times, the -file copying- was ended well,other times not.I did a format to my netbook,because I have searched and I found that maybe on my operating system was the problem.After the format nothing changed.
After a lot of search again,I found that chkdsk may help on the solution of this problem.3 days ago,I pluged my hdd and the *disk checker*(sorry if this is not the name)appeared.AutoCorrect file system errors 2)detection and recovery of bad sectors on the disk?This check was going well,but hangs a lot of hours at a sertain number of file.I stopped the check,restarted windows,and opened Safe Mode to run check here.Same problem appears.Check hangs at the certain number of files.But my hdd seams to be working,like the blue light is blinking.I saw on a forum that one person had a complete full 2TB external hdd and he took 47 hours to made check done.I am desperate for help,I can't copy a file bigger than 700mb-1gb.
how to move all my files from my internal harddrive to my external harddrive. Everytime I try to transfer my files it will transfer for like 1GB and then it will freeze and restart.
View 1 Replies View RelatedI have 2 internal-sata hard drives(320 gig. And 2tb.) and 1 external usb/2.0 hard drive (750 gig.). The pc is an old dell gx520 tower with a fresh install of Windows 7 pro. No antivirus, network connection, or firewall enabled. Processor is a Pentium4 running 3 GHz with 1.5 gigs of ram. This is the problem: If I do a search on the 2tb. Drive for all of the jpegs, I have a total of about 84000 pictures. When I select all of the pictures and right click-copy and try to paste to another hard drive the pc will lock up and won't display a copy status window. Windows says it's not responding. Now, if I right click-copy a single folder which has anywhere, from a few files to several hundred gigs. of data in it, using the same 2tb. Drive, it will copy over to another drive just fine. I have tried, changing the swap file from "windows managed" to, up to 20 gig. Thinking the search was maybe having to write to the swap file. This didn't work. I also booted in to safe mode and tried to do the copy from the 2tb. To the 320gig. drive and still no difference. I have tried this with windows copy handler and teracopy. It all has something to do with the fact that I am doing a search for the files before copying them.
View 1 Replies View RelatedHaving a weird problem with a LaCie 1TB Network space. It is plugged into my router and i can see it on my windows 7 computer, map its folder as a network drive and even create folders/new word documents on it.
However whenever i try and copy a file larger than a few kB my entire computer freezes (completely unresponsive). The computer recovers fine on a hard reboot.
Any Ideas?
Also my computer freezes after being left on for a while (this may be due to utorrent, saw some mention of it causing windows to crash after an hour).
I am running a freshly built Windows 7 x64 desktop. Bought a Netgear wnda3100v2 wireless adapter to connect to my router (asus rt-n56u). The connection runs fine most of the time - web access is OK, same with accessing a shared HDD connected directly to the router. But when i try copying files from another Home group machine (Windows 7 ultimate DELL Inspiron laptop), network connection immediately dies altogether - i need to remove the adapter and plug it back in to resume network connection. There are no problems accessing the files, it's the copying that is broken. I tried using both Netgear native drivers and these - same results.
View 3 Replies View RelatedI use a RT61 wlan card for which the winupdate got a new driver just a week ago.Now everytime i try to copy something to my second computer which is VistaHomePrem sp1, my computer freezes with no event log message.Everything else works fine (fe. uTorrent, emule, www, etc.).
Specs:
Windows7 x64 r7100
6Gb ram
P35
c2d 8200
When trying to copy a folder from Server 2003 to my Windows 7 64 bit it ends up freezing but I tried it on a xp computer nearby and the folder copied over in a minute.
View 2 Replies View Relatedmy computer keeps freezing. here is a video i recorded to show how it happens. i dunno how to explain what is actually happening. it happens often but depending on its mood. sometime its frequent sometimes its not.[url]computer crash - Internet the problem occurs when playing any type of media file whether its while playing video, music, or watching Internet or any other streaming.
View 9 Replies View RelatedI have two computers with Windows 7 64 bit set up as part of a Homegroup. I can see the computers from each machine and even browse files/directories. However, when I try to cut and paste or drag-n-drop files from one machine to another one machine freezes and requires the reset button to restart the machine.
It is only one machine that freezes, but it consistently freezes every time I attempt a file transfer. The computer that freezes is connected wirelessly to the network. The other computer is wired to the router. I am stumped. I have tried all new drivers, latest bios, etc.
I tried doing this. Example, game files/data from my XPdocs on C: to my Windows 7 docs on D: couldnt do it, just gave me a chime, no dialogue box or anything. Also tried to move a file from my desktop to either mydocs or to program files folder, same thing. After that, even took ownership of all affected folders/files, ones being moved and destination folder. Still the same.
Question: is there some type of security setting i am missing? anyone else test this? I have moved files to mydocs before, and now i cant move anything to there, has me confused now. Nothing special about a file or folder i am trying to move, permissions ect.
Tried both cut and paste, and copy, same problem either way. No protected files/folders involved
We update our client's software *.exe programs by storing the update code in a blob record in a server based MySQL database.
When the user logs on to the main program on his PC, if there are updates, a dialog message displays and the updates are written from the server to the local directory -- the same directory as the main program resides.
This has worked very well on XP (where we used *program files* as the directory).
It has also worked fine in vista and 32bit windows 7 (where we use the user's app data oaming directory.
On Windows 7 64-bit however, the update fails. It opens the file name of the updated program with zero bytes and then displays the message:
"Could not write to... c:Users[user]AppDataRoaming.. etc."
I've tried running the main program as administrator. I've turned off UAC. I suspect this is a security issue, but is there any workaround?
i noticed something really strange. i tried copying three iso files from my laptop to my external HDD. the problem is that after one iso is copied the copying process stops and resumes again after a pause and after that it pauses again and the third file starts. why it pauses to copy? i tries usb 3.0 and 2.0.in usb 3.0 the spped is around 94-95K Mbps. but once it starts to copy the second iso it drops to around 30K Mbps.its same with both the external HDDs.
View 2 Replies View RelatedI am trying to copy some files to my external hard disk but some certain files doesn't want to move or copy at all no matter how many times I have tried. I also formatted my HDD to NTFS but no result.
View 1 Replies View RelatedI have windows 7 pro 64 bit running on my box. One of the devices on my network is a media reader and a local drive connected to it. Whenever I try to transfer large files (350 mb and above) the transfer speed never displays and the copy animation runs until I get an error message telling me that Windows 7 can no longer access my media reader. Smaller files copy without issue. I've seen other posts with a similar problem but they don't appear to be exactly the same as this.
View 5 Replies View RelatedI have a brand new windows 7 home premium package and I would like to install on it on my laptop (windows xp). The cd drive however does not work and I was wondering if I could load the contents of the disc on my desktop and save them onto my USB stick, which would then go into my laptop?
View 8 Replies View RelatedI have a 1TB external HDD attached to my laptop.Whenever I attempt to copy multiple files to another HDD I am confronted with a BSOD.
View 5 Replies View RelatedI run my system on two partitions, one had XP and one 7 Beta. When i installed 7 RC1 i upgraded the XP install. This put all my files into a "windows.old" folder. All very well so far. All the files in this i can happily copy/cut and paste anywhere.
Except the files in My Music. This is a problem as i have a few 100 folders in there(each artist has a folder). The only way i can move (or even look in) them is to take ownership, which involves quite a lengthy clicking through dialogues. Fine for 1 folder, not for 300. I have tried running explorer in admin mode, in safe mode, whilst logged in as administrator (can i be admin any more times?!) to no avail. I get the dialogue:
"You need permission to perform this action.
You require permission from Jamie-PCJamie to make changes to this folder."
Oddly, Jamie-PCJamie is the user im using...
Im way too lazy to spend 2 hours doing each file individually so please come up with another way Thanks, Jamie
EDIT - SOLUTION!
Whilst writing this i had a brainwave - the user on my beta install had the same name. So i booted into the beta instead, and happily copied all my files over. As there's no feedback button any more im not sure how to report this quite large flaw, so feel free to suggest a way to do that. It's clearly not right as is, what if i had wiped my old install, as you usually would after installing a new OS...
Advanced user new to Windows 7 - I need to copy about 220 MB of files from one folder to two other folders, all on the desktop. In XP, opening the source folder and doing SELECT ALL would give the COPY, MOVE, DELETE options on the left hand of the folder. How best to do in Windows 7? Use the Copy to Clipboard, then Paste to the two other folders? If so, is the Clipboard big enough to handle the copying of up to 1.5 GB in files?
View 5 Replies View RelatedFor some reason, the transfer rate on my 2TB Western Digital internal hard drive has dropped through the floor. I'm not sure what has happened but when when I try to copy files on HD I'm only getting a maximum transfer speed of 4MB/second, which is abysmal. For example, as I write I'm doing a test copy of a folder (to another folder on the same drive) containing 90 gig of misc. files. Windows is reporting that this transfer will take around one day to complete!
I error checked the drive and it came up healthy, and in all other areas, it seems to be working fine. All these problems seem to have started since I decided to reformat the hard drive and reinstall Window, a job which I've done on this particular setup at least a couple of dozen times before with no problems at all. I must say though that installing Windows was SLOOOW this time though, a lot slower than normal, and I'd say it took about 3 times as long to do as normal.
My setup:
Hard Drive: Western Digital WD20EVDS-63T3B0
Motherboard: ASUS P6TD Deluxe BIOS rev. 0608 (latest)
GFX card Nvidia Quadro 3800
CPU: Intel i7 975
12 gb RAM
Windows 7 Home Premium x64
Since I got Windows 7 I have learned it is the same as Windows Vista not much difference, well except the new boot loading screen. Anyway why does it take so long for this to copy or move files?I am copying moving 4GB of data from my USB to my external hard drive and it takes forever, it says 1 hour remaining, it;s all ready been here for good 40 minutes now.Why is windows 7 so slow and copying/moving files?
View 5 Replies View RelatedI've just purchased a Seagate FreeAgent goflex ultra portable drive 1 TB usb 3.0 which I'm using it on my usb 2.0 port on the back of the computer. I've a front usb ports but its not giving it enough power so it's only working on the back side.I'm trying to copy some files using TeraCopy from my old transcend 500gb drive into this new seagate goflex 1TB drive. But its only giving me speed between 15-22 mb/sec on usb 2.0, without TeraCopy its even much slower. Both drives are connected on usb 2.0 on windows 7. Why is it not giving me atleast 30 mb/sec ? Should I return this drive and buy some other brand like Western digital or transcend ? Which external hdd get atleast 30-35 mb/sec on usb 2.0 ?Another problem is that the folders which I dragged and dropped into TeraCopy originally has 106,301 files inside them but TeraCopy says it is copying only 106,277 files. Why would it not copy all the files ?
My system specs:
Intel core 2 cpu 4400 @ 2.00ghz
windows 7 SP1 32 bit home premium
4gb ram
its been a long time since i last posted about my bsod and after i fixed them i began to get more of these. the only way i can replicate the problem is when i move or copy+paste files in the computer, mostly if it is from my computer to a external hardrive or usb... i attached the latest minidump file i got 021412-15958-01.zip
Edit: Go another bsod... if it helps i uploaded the minidump from that crash 021512-21153-01.zip
I am the equipment manager for a DJ service. I recently talked my boss into letting me build windows based systems for our DJ's to use instead of a prebuilt DJ console that would cost more than twice what my design would. One of the biggest concerns we have is the ease of one of our DJ's to simply bring an external HDD with them and copy our music library while they are at a gig. Licensing and legal use of music is a top priority to us. All of my searches online have not yielded any useful information. I need to find a way to restrict a user from copying and moving files, but still give them access to play the music files. Is there a way to do this without buying an extra security program?
View 9 Replies View RelatedWhen copying files in Windows 7, the box that shows the copying process has the "more details" button that shows more information. I really like to look at that info and would really like to not have to click the "more details" button for each copying process. Is there a way to tweak the registry to make the default show the more detail view instead of the less details view?
View 9 Replies View RelatedI've just installed the Windows 7 RC on my lab-pc. It's a 2,4GHz Celeron, 1GB DDR-RAM, everything installed on some old 160GB PATA-HDD. Two hi-speed USB Keys are used for ReadyBoost (love that feature).
Everything works like a charm, except the file transfer from my WXP machine.
I mount the SMB share (which is on my WXP) from the Windows 7 machine and start to copy some big files. Transfer speed is ~1MB/sec on 10MBit, ~5MB/sec on 100MBit and ~11MB/sec on 1GBit. When I start file transfer the CPU load pops up to 50% while 10MBit is active, for 100 and 1000MBit it jumps to 100% and stays there until the transfer is over.
Since I read about IRQ issues I tried some NICs. An onboard SiS-900, an RTL8139 based PCI card and an Intel Pro 1000/MT Desktop adapter. I thought that - at last - the Intel NIC should stop my problems as it comes with IRQ moderation and TCP/UDP checksum offload.
None of these 3 NICs solved my problem.
All these NICs run on the driver Windows 7 has found for them. None of the vendors had a special driver for me.
What I tried to do in addition:
- disable Windows 7 firewall
- disable IPv6
- disable QoS
- tried another CAT5e cable
- restart the switch (Netgear GS108)
- hit the whole machine
Note of the above worked.
I just hope you just have an idea left for me. Just ask if I missed out some details.
I have two laptops on my network both wireless, I also have a WD Live Hub on it too but that's hard wired into the router.
When I copy over large files to the WD box from either PC, sometimes more often than not (randomly) it will at some stage just reboot the PC, no warning nothing, Just windows restarts. I can then start the copy off again and it might work it might not.
There is no set pattern to this and its annoying that if you walk away while copying then you don't know if the copy is 100% successful because you come back and the machine is stilling there with nothing on the desktop and quite happy. Has the copy finished or has the machine restarted!?! I have to leave another window open to be 100% sure.
The second laptop is slightly different to the first in that does a BSOD memory dump when it happens and then reboots once its dumped 100% of the memory, where as the first just restarts instantly.
I don't know if anyone else is having or had this type of issue, is it because its the 64bit OS? I'm sure before when I had XP on both machines this never happened so its only since I upgraded them to 7 64bit but that was a long time ago.
I only get this issue when copying files to my WD box, the rest of the time - playing games, browsing the net, watching movies, the laptops are fine...
Yesterday I needed to copy some data stored on a DVD and it took more than ONE hour to transfer the files (11250 files and 151 folders for 625MB) to the hard drive.
I booted on my WinXP partition (so the very same hardware was used) and it took 20 minutes for it to complete the same task.
The data I needed to transfer were full of very small files and although I could hear my DVD player spinning at full speed on WinXP, it was very choppy on Windows 7 as if it was constantly seeking the files on the disc.
When I copy files to usb then i get message "You need permission to perform this action", can u tell me how can I copy files to usb?
View 2 Replies View RelatedI often get random BSOD's when copying files to an external USB device. I haven't been able to tell what's triggering them. It can be a large group of files or sometimes even smaller files, so don't know if it's related to file size Am unfamilar with troubleshooting BSOD's.
View 5 Replies View Related