Cannot Open Ports Correctly In Windows 7

Aug 22, 2012

why I cannot open ports correctly in Windows 7, but in XP I had no issues. If someone has the time..please contact me. I have tried reading, watching videos...

View 12 Replies


ADVERTISEMENT

USB Ports And Memory Card Reader Not Working Correctly?

Apr 8, 2011

My USB ports and memory card reader have all of a sudden stopped working correctly . the mem card slots i cant tell if they are working at all but the usb ports are still sending power as iv still be able to charge my mp3 player but it just will not send any data .. this is made even more frustrating as i was using them both less that 10 hours ago iv not installed any new software and i have not changed any hardware so tbh im completely at a loss as to why they arnt working .iv done only the basic things to attempt to get them working again.. i un-installed them from device manager and let windows re-install them to no avail . I also went in to my bios and made sure that the ports were enabled .. they were

View 2 Replies View Related

Why Can't Open Ports

Mar 1, 2011

I cant open my ports. My router has DMZ enabled and I have disabled windows 7 firewall and disabled the firewall in ESET Smart Security 4. PORTS STILL WONT OPEN!

Im trying to open 55550-55560

View 4 Replies View Related

Can't Open Ports

Oct 11, 2009

I just installed Windows 7 tonight and thus have moved from the Vista forums to here

But of course if everything were going smoothly I wouldn't be here. Now here's my problem, I'm trying to open ports for some of my programs but I havn't been able to. I've done it many times before in Vista with no trouble. I've tried disabling the firewall to see if that worked but it didn't.

Now here's where it gets weird. When I was in Vista I'd use Open Port Check Tool to check if my ports were opened correctly, it always worked. But now when I try it it tells me that my ports are closed, even basic ports like 80 and 21 keep getting:

Error: I could not see your service on 76.68.106.153 on port (80)

Reason: Connection timed out

View 5 Replies View Related

How Do You See What Ports Are Open ?

Dec 7, 2009

How do you see what ports are open ? and which ones do you want closed?

View 7 Replies View Related

All My Applications Won't Open Correctly

Nov 10, 2011

It seems all my applications are acting up so I have to use a separate computer. I know its not a virus since I never accessed the internet but all my applications went hay-wire, if I double click for example: notepad, it tries to open up internet explorer then shuts that down and asks me to run or save the file application, either choice I make causes the screen requesting those two options to reappear over and over. It all started when I made my falloutnewvegas.exe try to open with the falloutnewvegaslauncher which was the only one allowing the game to launch. so after that every application has a internet explorer icon in the middle of it with a blank page.

View 3 Replies View Related

Some Programs Won't Open Correctly?

Sep 2, 2011

when i open the some programm computer is showing the application was unable to star correctly. how can i fix tht problem

View 2 Replies View Related

Router Ports Won't Open?

May 6, 2012

So, i've been hosting games for a while but i don't know what happened, after i try to port forward router ports they just won't open :O. Yeh, as i go to Open Port Check Tool it says ''Error: I could not see your service on 62.**.***.*** on port (*****)Reason: Connection timed out''?

View 2 Replies View Related

Ports Are No Longer Open?

Oct 18, 2012

I've been hosting servers on various videogames over the year to play with my friends online, recently I tried a game which worked about a month or so ago (mount and blade: warband, I also tried a few others afterwards) but nobody could connect, I checked everything and it should have been working fine but then I looked at various port checking websites and for some reason none of the ports are open anymore.

I've tried changing the port settings, resetting the router and disabling my firewall and none of them seem to work.

View 4 Replies View Related

Firewall - How And What Ports To Open ?

May 9, 2009

So I have started to use windows7 RC and it's build in firewall. Until now i was on win xp with eset firewall. Everything is ok so far except two things:

1.) There doesn't seem to be anything like learning mode for Windows 7 firewall, or is there? How em I supposed to make a rule for application if I don't know what port it needs to open? I know, one can use google, but this can get pretty annoying after a while. Log file also doesn't help much because it doesn't list application names. Is there some kind of 3rd party simple app which would monitor attepts for connection and tell me which port a specific application just tried to use so i could make a rule in windows firewall?

2.) It seems that Windows 7 firewall is creating inbound rules automatically (at least for local applications), can i turn this behavior off?

View 4 Replies View Related

Can't Open Ports (port Forwarding)

Nov 30, 2012

For the past 3 days Ive been trying to open up ports in my router (Siemens sx763) with no luck. Ive done all the port forwarding correctly but when i check the port from a website it say my port is blocked. I use a wireless connection. I think ive done my other router/connections/ip settings wrong but im not sure what it is.

MiniToolBox by Farbar Version: 25-11-2012
Ran by Marko (administrator) on 30-11-2012 at 15:26:27
Running from "D:\Internet"
Windows 7 Home Premium Service Pack 1 (X64)

[code]...

View 1 Replies View Related

How To Close Open Unused Ports

Dec 12, 2012

There is a lot of noise, amongst not in particularly, high-power users,but also simple home or office users about open ports, net, web ports, being used,either from Windows itself or applications. DCOM is an example of a Windows service,that is "listening" to the net,but also sends data through out it. Skype does that all the time.What about those open ports, can they be "closed'? Should they be closed,for safety reasons,not to allow to be used by malware, spyware, hackware?

View 8 Replies View Related

How Do I Close Any Open Network Ports On My Computer ?

Nov 1, 2009

I'm using Windows 7 (RTM) and I've got a few questions.

How do I close any open network ports on my computer?

How do I network all the computers so I can remotely shut them down.

Like the server I have thats mapped to my desktop.

View 6 Replies View Related

Online Port Checker Sites Saying Ports Aren't Open?

Sep 6, 2012

I googled how to open ports and it told me go in to windows firewall>advanced setting>new rule etc. I want to install a game so I need certain ports to be open and unrestricted. When I used online port checker sites they all say the required ports aren't open

View 2 Replies View Related

"File Open" Window Doesn't Display Correctly

Mar 25, 2010

I have a problem running Patran 2007 in Windows 7, the program seems to run fine, and I am able to open data bases and work on them. The problem comes in when I want to either save the database, open a new database or just open a current database. For each of these functions a new smaller window pops up so I can navigate to the correct file or path to click on it or whatever.

Initially the window opens as I would expect, but as soon as I move the mouse or try to use the keyboard to navigate, the window goes blank and I can do nothing with it. Strangely, using the compatibility setting to open the program in a 640x480 display, they do seem to work fine, but because of the small resolution, I cannot actually see the part of the window where the files are - so that also doesn't help me.

It seems as though there is something between Patran and Windows that one of them don't like, but it baffles me that everything else works fine. If any one else has had the same problem, maybe with a different program even, let me know what you did to resolve it. Otherwise any advise would be useful.

View 9 Replies View Related

"open With" Command Not Working Correctly

Jan 27, 2011

I've been using XP for 6 years and just switched to Windows 7 3 days ago when I got a new computer.

The default image viewing is Windows Photo Viewer, which is fine. I am running Fireworks MX (yes, I know it's old, but I can't afford to buy a newer version), and sometimes I'd like to open images directly with that in order to edit them. So I right click on them and do open with --> Fireworks MX. Fireworks MX correctly appears in the "open with" list, but even when I choose it, it still opens the photo in Windows Photo Viewer.

So my workaround so far as been manually opening Fireworks MX and then dragging the photo into it, but obviously I shouldn't have to do that. I have Windows 7 Home Premium 64 bit if that matters.

View 2 Replies View Related

USB 3.0 Ports Refuse To Work As USB 3.0 Ports

Aug 9, 2011

A few days ago I installed a USB 3.0 card (to be precise, this one: 2-Port USB 3.0 SuperSpeed PCI-E Controller Card - Free Shipping - DealExtreme). It uses the very common NEC PD720200 USB 3.0 controller. I installed the required drivers for Windows 7, and the card worked fine for the first day or so. but not since. Whenever I plug in a USB 3.0 external hard drive, I get a false "This device can perform faster..." message, as if I had plugged the drive in a USB 2.0 port.

The external drive I am using is a Western Digital MyBook Essential 1130. It is definitely a USB 3.0 drive, and came with the required USB 3.0 cable. While the USB 3.0 card was working, I got full-speed transfers to the limit of the hard drive's ability, about 90-100 MB/s. Now I can only get USB 2.0 speeds (33-34 MB/s). Windows insists I have the drive plugged into a USB 2.0 port even though it is plugged directly into the USB 3.0 card.

Things I tried so far: -rebooting and complete power cycle. No difference. -plugging the drive into one port or the other. Also no difference. -Looked in Device manager.The controller is recognized as a USB 3.0 device is using the proper NEC drivers.

Other info that may be important:

-No overclocking settings in use.

-I made sure the cable was plugged in all the way. It's in as far as it can go, but the ports will still only act like USB 2.0 ports.

I might as well throw the card away if it is only going to act as a USB 2.0 device.

View 4 Replies View Related

Windows Won't Load Up Correctly?

Oct 25, 2012

It loads fine but I wonder why doesn't the come up when it's booting up. It just stays there black. Is it because I have reinstalled my operating system way too many times? Because it's been like this since whenever I reinstalled it. Not a big deal but I'm just curious as of why. My windows is activated, btw.

View 5 Replies View Related

Windows 7 Won't Return From Hibernate Correctly

Aug 22, 2012

Windows randomly started having problems returning from hibernation and I cannot figure out why. Any time it returns from hibernation the screen is black but it has a backlight to it so I can tell it's on and I can hear the discs spinning so I know it's working. I have to hard boot it to get it back. I tried increasing the paging file size in virtual memory. I have 8GB of ram and I increased my paging file all the way to 16GB just to be safe. Reinstalled video card drivers.

View 3 Replies View Related

Unable To Correctly Boot Into Windows 7?

Feb 26, 2011

I was playing around with a program called PartitionMagic, because I wanted to convert my external harddrive from NTFS to FAT32, but it didn't work, so I tried another program. Partition Manager. As soon as the installation started, the computer had a BSoD, and has started having this every time I try to boot the Computer.At first I thought this was only caused by the harddrive, but I put it to a test, by removing the harddrive, and adding my laptops harddrive instead. Sadly the same thing happens. It boots into the Windows logo, and then a BSoD appears, restarting my PC yet again.I've tried launching the Startup Repair, but it results in failure. The description tells me that the "Boot Configuration is corrupt", so I tried searching for a fix on this.

That led me to trying bootsect.exe and bootrec.exe on the command prompt, through both the advanced startup repair thing, and through the Windows 7 Installation DVD.Even though all the commands I've ran say they were executed successfully, it still gives me a BSoD on startup.As a last resort, I tried to format my harddrive through the Windows 7 DVD. This is where I noticed that it recognizes my harddrive, but tells me there is only 100 or so mb on it.Also if I try to do a system restore, it gives me "an unexpected error: A device attached to the system is not functioning. (0x8007001F)

View 12 Replies View Related

Windows 7 Does Not Resume Correctly After Sleep

Feb 6, 2011

Every time I put my computer to sleep or hibernate and wake it up, the computer resumes to a screen stating "Windows failed to shut down correctly" A recent hardware or software change might be the cause and I'm asked to choose how to restart.Quite similar to the screen I would get after a crash.

View 2 Replies View Related

How To Get Windows 7 Place INI Files Correctly

Feb 11, 2011

I have a series of applications that depend on an INI file being in the Windows directory. Also, many different users are allowed to log on and change the INI file. But Windows 7 places changed INI files in USER directories for the logged-on users. So my Apps never get to see the changes! How do I get Windows 7 to place my INI file in Windows directory where I need it?

View 7 Replies View Related

Windows 7 Still Can't Boot With Static IP Correctly

Feb 22, 2011

I set my Windows 7 Pro computer to a static IP. Reboot and the computer can't get to the network, forget the internet. Give it a DHCP IP, then immediately give it the static it had and it works fine. does anyone know a script I can have run at startup that sets the NIC to DHCP, then back to the static I want?

View 7 Replies View Related

Windows Installer Not Correctly Installed

May 25, 2011

Windows is set to start normally but apple software download says windows installer not correctly installed.

View 2 Replies View Related

Windows 7 Search Does Not Work Correctly

Jan 1, 2010

This is a fresh install and I have Indexing enabled for the Entire root drive and have not altered any settings for Windows Search functions.Example is file extension .fdb (It's a legacy database file), I have hundreds of this is several locations that I cannot recall all locations so I'm trying to use Search.The OS is exactly named "Windows 7 64-bit Home Premium"What is going on?What could be something to check?Is their some setting I've missed?Is their any info from MSFT? Registry settings?

View 12 Replies View Related

Windows 7 Installer Not Correctly Installed?

Dec 12, 2011

I have windows xp and can't expell some of my installed programs as i get the message the windows installer is not installed correctly. I looked at regcleaner.com, and await an answer to be sure that if i buy their program it wiinstall windows installer service. Am i walking the plank on this? I just want a simple fix to get this over with. I tried microsoft, but it wasn't applicable, as they asked for some things that did not show up in the window and or?

View 2 Replies View Related

Windows 7 Search Does Not Work Correctly

Feb 21, 2012

windows cannot a=ccess the specified path or file. /you may not have the appropriate permissions to access the item And yet it is my personal laptop and I am the administrator?

View 4 Replies View Related

Can't Get Windows XP Mode To Install Correctly

Aug 28, 2010

I recently upgraded my machine to an AMD Sempron II X3 720 Black Edition. I've enabled virtualization in the bios. I've gone and downloaded the following two files from Microsoft's Virtual PC web page:

Windows6.1-KB958559-x64.msu - the Virtual PC installation
WindowsXPMode_en-us.exe - the virtual PC XP Mode file

I've installed both files but nowhere in my menu do I have a Windows Virtual PC folder to launch into Windows XP mode.

When I go to the C:Program FilesWindows XP Mode directory, all I see is this:

A folder called Tutorial
KEY.TXT
VXPEULA.txt
Windows XP Mode base.vhd

But nowhere do I have an icon in my start menu Virtual Windows XP shortcut.

View 19 Replies View Related

Installer For Windows 7 Not Correctly Installed

Nov 3, 2012

When trying to uninstall HP Support Assistant: "Windows installer is not correctly installed".

View 1 Replies View Related

Usb Ports Not Working On Windows 7?

Mar 19, 2011

I have three USB ports on my Gateway laptop and none of them are working. I've tried un-installing them through the Device Manager, but the action gets hung up and I have to stop it (I've let it run for 10+ minutes) through the task manager. When I re-open the Device Manager the USB all the controllers are still there.

I bought an expansion drive because I wanted to back up my photos and other files. After I did that I was going to reinstall a clean version of Windows 7 as my laptop hasn't been working well lately.

USB ports would be greatly appreciated.

View 3 Replies View Related

Disable Windows 7 Ports?

Nov 1, 2012

I am posting this in proper location, Is it a good idea to disable port(s) that allow remote assistance to win 7 computer and if so how to know which ones to disable?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved