Cannot Access The Web Either By Cable Or Wireless
Oct 1, 2012I cannot access the web either by cable or wireless. I tried to uninstall all of my network devices software but the WAN would not uninstall and would not update.
View 1 RepliesI cannot access the web either by cable or wireless. I tried to uninstall all of my network devices software but the WAN would not uninstall and would not update.
View 1 RepliesThis question may not be what you think it is. I am trying to fix an intermittent issue in my home environment. The issue is I am having to use wireless. Our Xfinity Cable/WAP modem sits on the top floor of our house. I am located in the basement. The wireless signal I get most of the time is very good, and by very good i mean at least 15+ mb/s on [URL]
I am taking the Cisco Network Academy classes and am familiar with network terminology and concepts. However, what I'm trying to do is take a router/WAP (using it downstairs where I'm located) and configure it to access our xfinity modem upstairs, so that I can plug in to it downstairs using a RJ-45.
Let me know what yall think. By the way the router/wap i would be using is a netgear model unknown at this moment but could easily find out.
I'm a 3g dongle to connect to the net, I previously set up the ps3 to connect through same via the wired connection. That work fine for a bit, until I updated the firmware, Since then the PS can't seem to obtain an IP address and after setting a static IP it gives me a DNS error. On the flip side, my LAN is giving me a no internet access problem(ipv4) and also an unidentified network
I've changed the cable, released and renewed and reset the ipconfig and also flush DNS. I'm having the same problem with my laptop. Both were able to share the connection with the PS3 before.
(Pc runs windows 7 32 bit and laptop win 7 64bit)
I have this problem with my laptop. If i am using a cable to connect to the internet and then unplug it and switch to wireless connection, the internet connection gets unstable. The thing is it says it is connected to the right wireless connection AND it claims to have internet connection. - And i do - for a few minutes.. If i deactivate/activate the wireless internet i am able to surf around for a few minutes again, but then it does the same thing again - shows up as having internet connection but im unable to connect to it..Strangest thing is that i am sometimes able to connect to the internet ONLY if another computer is using the wireless internet too.. It still shows up as recieving a nice signal with internet access even though i cant connect to the internet.
The same problem also occurs sometimes when im switching from one wireless connection (at home etc) to another (work etc)..I've had this problem for a few months now.. Comming to think of it i might have had this problem ever since i got my laptop.. Rebooting my computer fixes it every time, but it's not a permanent solution.. Im running original Windows 7 Home Premium x64 which came with the laptop.. Also im not using static ip or anything like that - switching to static ip doesn't do the trick.. Running ipconfig /all command from cmd also shows me as connected to the right router.. The problem occurs every time i switch between cable and wireless and not only at my home or work but also at friends..I'm not sure if i need to leave any more details, if i've left anything out just let me know.
My wireless connection only connects when the network cable is connected. If I unplug the RJ45, the wireless won't connect. This is so dumb.
View 1 Replies View RelatedI am having trouble connecting to internet with a hard wire cable but the wireless works just fine. Is this problem in my security settings ?
View 3 Replies View RelatedMy laptop suddenly stopped being able to connect to the network in my house and for that obviously it doesn't have any internet. It doesn't work either by connecting a cable or trying to use the wireless, here are the detaills for each case: When I connect the cable, the laptop detects it, but doesn't detect any network, it doesn't seem to even be trying. I checked on the network adapters, and it clearly says "enabled" when connected and when disconnected it changes to "No network cable plugged in". When I try to connect to my network, it always ends up saying "Limited access", when I tried troubleshooting, it said that there may be an error with the network drivers, I tried the fix there, and then it says that there must be an error with the network adapters.
Here's what I have tried so far:
-Reinstalling the devices and drivers, when I check them in device manager, it says that both the wireless and network driver are working properly.
-I tried resetting the router.
-Tried resetting the bios of the computer to it's factory ones.
- Tried resetting IPv4 and IPV6, along with the IP/TCP using the command prompt, still no go.
When I try to ipconfig /release or ipconfig /renew, I get an error saying the next thing: "An error ocurred while releasing interface Loopback Pseudo-Interface 1: they System cannot find the file specified. The operation failed as no adapter is in the state permissible for this operation."
Here is my info when using ipconfig /all:
Host name... : Jorge -NB
Primary Dns Suffix : Empty
Node Type : Hybrid
IP Routing Enabled: No
Wins Proxy Enabled: No
Tunnel adapter teredo tunneling pseudo-interface:
Media state: Media disconnected
Connection-specific DNS suffix: empty
Description: Teredo Tunneling Pseudo-interface
Physical Adress: 00-00-00-00-00-00-00-E0
DHCP Enabled: No
Autoconfiguration enabled: Yes
I have internet sharing on my mac turned on, so trying to get the PC to read the laptop as an access point via said cable. I know this has been done on XP, but I'm having issues with Windows.
View 1 Replies View RelatedIn a few days time I will be changing my ISP in the UK from Sky to BT.
BT are providing me with their newest wireless router free of charge as part of the deal and I'll be using that to set up my wireless network, which will consist of an HP Pavilion desktop, a Toshiba laptop, a Sony Vaio laptop, an HP wireless printer and a Samsung HDTV.
This means my Sky wireless router is surplus to requirements, so I was wondering if I could convert it to a wireless access point to improve the range of my BT wireless network.
I've read a couple of supposedly easy-to-understand articles on Google and have to say they left me more confused than ever.
I have Windows 7 Pro (RTM) installed on a DELL Precision M65 laptop.
My LAN interface reports "Cable unplugged" although the cable is inserted and working.
I have no network connection through this interface.
the onboard NIC is a Broadcom NetXtreme 57xx Gigabit adapter and the driver reports it is working correctly.
If i try to install the latest driver from Broadcom, Windows says I already have the latest driver installed!
Any Suggestions?
I've been using wireless internet for months with my new computer which has Windows 7 64-bit. Today I disabled the wireless security for a bit, then tried to enable it, now I can't connect to anything. The problems are: 'The DNS server isn't responding' and 'Local Area Connection doesn't have a valid IP config'. My wireless icon keeps switching between a yellow exclamation point icon and a circular blue loading icon. It says it's connected but I cannot browse the net, I can access my router information though. My router/modem are definitely on and connected. I've done many power cycles on those and my computer. My modem is Comcast and my router is a Netgear WPN824 V2. The router has the most recent firmware.
Here is my ipconfig data:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersVector03>ipconfig
Windows IP Configuration
[code]...
Already reset tcpip as admin, reset the modem, disabled bonjour, set Internet protocols to auto. Can connect on itouch, other laptops can as well. Only me and my friends laptop can't.
View 3 Replies View RelatedI have a wireless router "Belkin", and when I am try and access the internet I receive an error message "Server not found" this only occurred occasionally an once I would connect directly it would solve the problem. And I would again be able to go wireless. However, the problem has occurred and now persists. My IT guy at work suggested that I remove my wireless driver and reinstall I did that and I am still experiencing the same problem. Here is my "ipconfig/all":
Windows IP Configuration
Host Name . . . . . . . . . . . . : MININT-1GU3A0D
Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Belkin
[code]....
Basically ive bought a new DELL XPS 7100, everything was going perfect untill i tried connecting to my interent, ive tried everything it says im connected but with limitted access its really frustrating when ive paid good money for somthing and it doesnt work.
View 3 Replies View RelatedI have a Sony Vaio laptop, running Windows 7 Home Premium 64bit, Up until 2 days ago I had absolutely no problem using its wifi and/or staying connected to the Internet. Two days ago, however, while being on Skype, my Internet connection got disconnected unexpectedly. �With windows Network Diagnostics,I sometimes get "The DNS server isn't responding", and sometimes "Local Area Connection/Wireless Network Connection doesn't have a valid IP configuration"OR "computer is trying to use a DNS server that is incorrect or doesn't exist."Even with the cable I am not able to connect to the internet so I can't update the network adapter or fix the problem online. Looking at the 'Basic network information and set up connections' (in Control Panel - �Network and Sharing Center) I see my laptop (sometimes connected, sometimes however the line between the laptop and the 'unidentified network' has a yellow triangle on it) �and I can see the 'internet' with a red X on the connection line between that and the 'unidentified network.�When checking the 'Wireless Network Connection Status' it's showing �that it's connected, activity's showing 'sent and received bytes' but says 'no Internet access' to both IPv4 and IPv6 connectivity.I read lots of blogs and advice and tried many of those 'fixes' that were recommended, some of which were the following (shorter versions):�
- unplugging and replugging the power cable to the modem
- resetting the wireless router
-rolling back driver
- �obtaining IP address and DNS server address automatically for Internet Protocol V4 and V6
[code].....
None of the above worked. Right now under 'status' it's showing:
IPv4 connectivity: no Internet access
PIv6 connectivity: no network access
�I've used this network for a while and this is the first time this problem has occurred.�Be it network driver issue or a patch of some sort i may need to download, until i can connect to the internet, I can't fix this problem on my own. In the meanwhile no other computer or phone with wifi in the house has any problem connecting to the Internet.�I took it to a computer technician who said I need to reinstall Windows 7.
I have an ADSL modem connected to a Cisco E-1000 wifi router. I have two laptops (Windows Vista and 7), an iPad and two smart phones. The iPad and the phones connect without any problems at all and stay connected without interuption. But the two laptops keep losing internet access! They stay connected 10-15 minutes, then invariably lose internet access. I have to manually disconnect and reconnect again to get back on the net - but again, only for 10-15 minutes.I've tried many things - changing the channel, playing with all sorts of parameters (as suggested by the online chat guy) - but to no avail.
View 9 Replies View RelatedI have recently purchased two new notebooks both running windows 7 ultimate 64 bit and I have a 400 Billion Telkom Router with wireless internet capabilities. During the first few days the wireless connection between the router and the laptops worked perfectly and both had internet but then all of a sudden all internet access was lost.
The network was still running and the laptops could connect without any problem but nothing I do will allow me internet access. The same thing happened with a wireless network adapter i purchased for my pc also running windows 7 ultimate 64 bit edition. I should note that the pc using the router is running windows xp and I wonder if it has something to do with a compatibility issue between the two operating systems. I have already tried changing the DNS server and ip adress but nothing seems to work.
Great connection but no internet access. The wireless internet works fine on other lap tops and I have rebooted.
View 2 Replies View RelatedI am getting a limited access to my SMC8014WG wireless router from my new netbook with windows 7? is there a router upgrade required?
View 2 Replies View RelatedTwo weeks ago I bought a DELL Inspiron 1545 - T4500, and I had no problems with it. It connected to my Wireless Internet, and my parents' one without a hitch. However, at the weekend, one minute it was connected to the wireless, and the next minute it lost the signal. I tried to re-connect it, but no luck. It sees the network, says that it is connected to it with full strength, however in the 'Currently connected to:' section at the top of the pop-up, it says 'Unidentified Network, No Internet Access'. And when I try to go onto the internet, it says 'Server not found'.I have tried the diagnostic test, and it gives the error that 'The Default Gateway is not available'. I have tried turning off the modem and router, and unplugging everything, but it still isnt working. Interestingly, my old laptop (XP, about 4yrs old) IS working. Also, I have tried to link to my parents wireless and a friend's and neither are working on the new PC.
View 9 Replies View RelatedI've been battling this problem for a few months now. On my lenovo x100e laptop with windows 7 I can connect to my wifi network and sometimes go to a website before it says "no internet access" while still being connected to the network. Any other laptop or phone connects and has internet just fine except for mine. Just one day out of the blue this started and I cannot find what's wrong and this is only with my laptop. The strange thing is that my laptop connects just fine with other wifi networks and has internet. What I have tried is re installing my wireless router countless times and also I re formated my laptop and re-installed windows twice. Problem is still re accuring.
View 9 Replies View RelatedI'm using an ASUS Pro31F laptop with Windows 7 Professional 32it.We recently moved house and got the internet set up. For everyone else in the house the wireless works fine. However for me and my laptop, it is constantly disconnecting and will say "limited access" with a yellow exclamation point over the wireless icon in the system tray. So in other words, it appears as if it has a connection, yet my internet will stop working. I have to disconnect from that same icon and reconnect which usually fixes the problem. But it's so annoying I'm finding myself often having to do it at least every 5 minutes while I'm surfing the net.
Now other members of my family with laptops have mentioned to me occassionally it will disconnect for them, yet rarely - more so nowhere near as much as me. The main difference between my computer and everyone else's is that I'm the only one using Windows 7 while the rest of them all have XP. I've even tried going to other ends of the house where they use it but have the same problem, leading me to believe it is a problem with my computer and not the wireless or router itself. I'm also thinking it is most likely an issue to do with windows 7 as I searched the net and found many people with similar issues. I never had a problem with the wireless on the same laptop at my old house however.
It appears to happen intermittently, however one thing I have noticed that it will usually increase the chance of happening if I am performing a lot of activity on the net. For e.g. if I am looking at wikipedia and open several tabs from links within that page in a short period of time, it will usually not like that, and disconnect again. Same as if I am multi-tasking switching between a few tabs and loading a few pages at once.
I have a Dell D620. When i connect to my docking station. I can not access my my wireless, air card or lan connection.
View 3 Replies View Relatedso recently these few days i've been having some problems with wireless connection in my laptop. whenever i'm browsing the internet or using Internet etc., i'll suddenly lose access to internet even though i'll have full bar connection.
i'm using a hp g62-358 with windows 7 home premium 64-bit.
i've been using it since 2010 until now and this problem only just came up recently. there are 5 laptops including mine that are in the house using the same wireless network. however, only my laptop has this issue.
this problem only happens when i'm on the net. when this happens, i had to either disconnect from the network or turn off the wireless lan adapter and wait for a few minutes. when i reconnect or turn on lan, i'll have access to internet again, however not for long.
i am try in connect for the first time to wireless network, it says wireless limited access
View 5 Replies View RelatedI have a new gaming computer with a high end video card and plenty of RAM and a high speed cable Internet connection. I also have a HDHomeRun TV cable unit which is listed to work with MS Media Center. When I set up my Media Center/TV connection it recognizes my HDHomeRun TV connection and all three TV channels via my MCard I got from Comcast cable. But next to the last dialog window, during setting up my TV connection, I got the following message, "Your computer is not digital cable ready. You will not be able to set it up for use with a cable card."
View 4 Replies View RelatedI use wireless network in school, and i want to access some files from other computers using the wireless connection.i use by toshiba c675 windows 7i have no clue on special tricks other than common knowledge of computer.
View 1 Replies View RelatedI have my ip config below:
Windows IP Configuration
Ethernet adapter new:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::ddc2:bdfa:e412:c367%12
Autoconfiguration IPv4 Address. . : 169.254.195.103
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . : ............
A few hours ago I installed a Windows update, so my ACER Aspire 5733 restarted. I shut it down after the restart, not paying attention to the wireless. When I went to turn it back on, I couldn't get online because my home wireless connection has "Limited access."The icon signifying signal strength on the taskbar has a small yellow star-shaped dot on it. When I click on it, it pops up and says "Not connected. Connections are available. It then says my wireless network name and says "Limited access" next to it. The signal strength is excellent.When I disconnect and then reconnect it says the connection was unsuccessful because the computer has limited connectivity.The same network is working on my other laptop and on my iPod, but not on my Aspire 5733.
View 9 Replies View RelatedA few days ago I booted up my HP Pavilion dv4-2049wm laptop. Windows update needed to reboot, due to my postponing it for a few days, so I let it reboot and I started getting blue screens. After a few restarts (getting the BSOD every time), I booted into the last known good configuration. It booted up fine, but now I can no longer connect to my network (wired and wireless). It sees my wireless connection, but states "Limited Access."
Things I have tried:
- Uninstalled/Updated network drivers from HP's site, specific to my laptop model.
- Uninstalled all windows updates that were installed before BSOD
- Flushed, registered, renewed dns via command prompt
- Reset Winsock via command prompt
- Tried a "clean" boot
- Ran Windows Check Disk
- Ran Windows Memory Tester (Unsure of exact name)
On the day of the crash I attempted to do a restore, but the earliest restore I could do was at the time of the windows update (same time as BSOD). One thing I did notice is that the "Teredo Tunneling Pseudo_Interface" listed under network adapters is no longer there. Not sure what that might have to do with anything. I ran this tool (Who Crashed/Crashdump) and here is my log:
Code:
System Information (local)
computer name: DECARO
windows version: Windows 7 , 6.1, build: 7600
windows dir: C:Windows
CPU: AuthenticAMD AMD Turion™ II Ultra Dual-Core Mobile M620 AMD586, level: 16
2 logical processors, active mask: 3
RAM: 4022542336 total
VM: 2147352576, free: 1925451776
Crash Dump Analysis .........
[Code] ....
On your computer a total of 26 crash dumps have been found. Only 21 could be analyzed. Only 15 are included in this report. 2 third party drivers have been identified to be causing system crashes on your computer. It is strongly suggested that you check for updates for these drivers on their company websites. Click on the links below to search with Google for updates for these drivers:
atikmpag.sys (AMD multi-vendor Miniport Driver, Advanced Micro Devices, Inc.)
athrx.sys (Atheros Extensible Wireless LAN device driver, Atheros Communications, Inc.)
If no updates for these drivers are available, try searching with Google on the names of these drivers in combination the errors that have been reported for these drivers and include the brand and model name of your computer as well in the query.
I am on a cabled LAN network with internet access. I can also access the internet through a different wireless router. When I am connected to the LAN by internet access is also through it. I would like to stay connected to the LAN network but at the same time have the internet access through the wireless. Is there a way to set this up?
View 5 Replies View Related