Your Computer Was Not Assigned An Address From The Network
Jan 3, 2010
I read Event Viewer stating: ERROR
"Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x00025B66A83D. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address"
I do not understand it, i have set my network to static IP, not receive from DHCP server from my router. I have confirmed that by "ipconfig /all"
I have "ping localhost" with no 4 replies and have "ping 192.168.0.11" which is my computer. I did not received all 4 replies either.
I have ping to my router (DHCP Server) and it works OK.
Is it possible something wrong with my Ethernet hardware or just Ethernet driver problem?
Possible cause: TCP/IP Stack or my Ethernet is corrupt. What I can do about it?
View 2 Replies
ADVERTISEMENT
Dec 21, 2012
I have been using my computer to connect my xbox 360 to the internet all has been well until now. Just recently I started having some connection issues. So trying to resolve I removed my wifi adapter drivers and reinstalled them, I ran the troubleshoot part of windows network on the adapter and lan connections. Somehow a new wifi connection appeared in my network and sharing center (mini port wifi) and now when I try to enable ICS it tells me that the ip address for automatic ip addressing is already assigned in a error message.
And it will not allow me to share my internet connection. I have tried to bridge the connection to the local area connection and the computer acts as if it did it correctly but when I try to connect my xbox it will not work and on the xbox dashboard it does not show my connection being good to the network. I have even already replaced all wiring involved with this setup thinking it may be a bad ethernet cable to no resolve. This setup worked for months so I see no reason why it would not work now.
View 2 Replies
View Related
Feb 26, 2010
When I go to the Network folder, all of the computer names on the network are listed.But the IP Address column is blank. How do I get it to display the IP Address for each computer listed? Also, can I get it to display the Computer Description as well?
View 6 Replies
View Related
Oct 21, 2011
i have 3 computers - a laptop (vista wireless), a home theater pc (win 7 wireless) and my main computer (win 7 wired) with all my media files.i have a network setup and the laptop and the HTPC can connect to each other when i click their icons in network neighborhood. i can also connect to them from my main computer (QUAD-CORE) but if i try to hit the QUAD-CORE icon on the laptop or the HTPC i get - network path not found. if i type 192.168.1.100 it connects perfectly (i can see all my shared files so i don't think there is a problem with the way i have shared the files) i think my problem is that when i click on the QUAD-CORE icon it is looking for the ip address but something is broken.
View 3 Replies
View Related
May 18, 2012
So today I started having this weird error message that my network mapped drive to the server downstairs was no longer functioning. The gist of it is that this setup has been functioning for months without hiccup or problem. The only thing that has changed is I recently converted my routers over to DD-WRT (v17990 for WNDR3400). I'm reasonably certain that this is not the issue since I can still punch in the server's IP into the network browser as \192.168.1.90 and it comes up (I can also ping it, and it shows up in the server browser for the game it hosts), but for whatever reason I can't use the server's actual machine name \mcs anymore as it gives me a connection timeout issue. So far this is what I've done:1.) Enabled NetBIOS over TCP/IP.
2.) Attempted to enable Network Discovery, but for some reason on Server 2008 R2 that option doesn't stay on, so I enabled Function Discovery Provider Host, Function Discovery Resource Publication, and SSDP Discovery in the services control panel. This caused the machine to show up in the browser, but it still can't be connected to.3.)Double checked the subnets just to be sure, they are the same.The server is attached to router 1 via ethernet. The desktop is attached to router 2 via ethernet, but the two routers connected over a wireless bridge (technically repeater bridge mode according DD-WRT).I also have a few wireless devices that are connected, but they seem relatively inconsequential. I realize this isn't really a significant problem, but its really kind of annoying
View 2 Replies
View Related
Oct 15, 2012
I have a strange setting in my windows 7 configuration: There are two ip addresses on the same network connection at the same time.
[code]...
View 8 Replies
View Related
Sep 27, 2012
I have problem with my wifi. I can't connect to a specific network(can connect to others). I can connect to that network fine from other computer. This happened before, couldn't connect to this network for like a month and then it fixed itself somehow and it worked fine until now. I've tried release and renew but it didn't help, when renewing it said that cant my dhcp server for new ip.
View 9 Replies
View Related
Dec 26, 2009
I'm setting up a new computer and having problems getting on the Internet. The connection worked at first but was very slow. I changed Ethernet cables to see if that was the problem and now have nothing.
The error that I am getting is:
"Local Area Connection" doesn't have a valid IP Configuration
I also have Norton Internet Security running which could be part of the problem.
View 5 Replies
View Related
Feb 25, 2011
I am trying to map my drive to my server via IP Address
View 2 Replies
View Related
Aug 31, 2009
I have been using Windows 7 for about a month now and two days ago i started to have network problems.
I cannot connect to the Internet or my network and keep getting messages saying that the network cable is unplugged when it is not. After a while i was able to get a different message and the computer connects to an unidentified network and when i troubleshoot this it tells me i have an invalid IP address.
I know the problem has got nothing to do with the hardware or my Internet. I have tried 2 other router's & another modem with different Ethernet cables with no luck but my network/Internet is working fine on my laptop which is also Windows 7.
View 9 Replies
View Related
Oct 17, 2012
How to change the IP address of wired network printer?
View 2 Replies
View Related
Dec 17, 2011
I have an Atheros AR928x Wireless Network Adaptor and need to change its configuration for our XBox to connect to the internet. how to determine the IP address to gain access?
Sony Vaio with Windows 7 Home Premium - Svc pk 1 -
View 1 Replies
View Related
Jan 11, 2012
I have 5 Windows 7 computers connected to the same homegroup/workgroup via a Cisco Linksys E1200. All four computers are HPs of various makes, 3 laptops (one of them is a $600 brick) and 2 desktops. Any computer that is awake and online, shows up (with its name) in Network on the other machinesHowever, double-clicking to view files on these computers returns the following message:Code: Windows cannot access \COMPNAMECheck the spelling of the name. Otherwise, there might be a problem with your network. Totry to identify and resolve network problems, click Diagnose.Details: Error code: 0x80070035 - The network path was not found.Diagnose, as expected, did nothing. However, here's the fun bit - when I try to access files on other computers by browsing their IP address, everything works perfectlyFor now, anyway. I'm expecting a sudden degradation any day now.
View 7 Replies
View Related
Mar 16, 2012
We set up three new terminals this week at the office; they're all running Win 7 Pro 32-bit. I set them all up simultaneously (literally sat at a desk and entered the same keystrokes at each of them), so I don't see any obvious reason that one is behaving differently from the other two. The essential problem is that the terminal doesn't see the Internet. Here are all the particulars that I think might be interesting, listed in no particular order:
- The terminal ran fine for several hours. Email access, Internet access, from 9 a.m. to 2 p.m. At that point, the user called me to show me a dialog box. I used System Restore to go back in time to 9 a.m. in case the user had somehow managed to do anything (though she's not an admin).
- IPv6 is disabled.
- The workplace uses Static IPs. The IP address is entered correctly in the IPv4 properties (x.x.x.213), but at cmd / ipconfig, I get this result: "Autoconfiguration IPv4 address: 169.254.95.187"
- In Network and Sharing Center, the network (which is only known as Unidentified Network) is set to type Public. When I reset it to type Work and reboot, it resets to type Public.
View 1 Replies
View Related
Jan 3, 2013
Above is the error that comes up after I troubleshoot this issue. okay so to start off let me say the things I have done.
1. I have restarted my computer multiple times and restarted the modem and router.
2. I've checked my services to make sure that that weird code is not there and it was not.
This problem just came up recently and had no issues with it before and this computer has been running for over a year.
View 2 Replies
View Related
Jan 14, 2012
m using toshiba satellite L640 when i try 2 connect 2 internet it keeps on acquiring network address and shows limited connectivity in windows 7 home premium..
View 1 Replies
View Related
Jul 6, 2012
how to use 2 mac address on same computer?
View 1 Replies
View Related
Jul 17, 2012
I'm looking for really good network tools software, that can completely manage my LAN - monitor network activity on all PC's on the LAN (upload/download activity), port scanning, wireless management, assigning IP addresses and just all the general network tasks.
View 3 Replies
View Related
Sep 11, 2012
I have 4 USB memory sticks I use on a regular basis, a 4, a 16, a 32 and a 64 GB.This problem only happens with the 64 GB stick, and only on one of my several computers.Most of the time when I insert it, windows does not automatically assign it a drive letter. I have to into the computer management --> Disk management section and manually assign it a drive letter. Occasionally however when it is inserted, windows assigns it a drive letter just fine. This only happens on one of my laptops.It works fine of all of my other computers and every other computer I have stuck it in
View 1 Replies
View Related
Jul 9, 2012
Last Friday my main desktop crashed (lost power to the machine) and on restarting the PC was unable to "identify" the network. By identify, I mean, when using "Network and Sharing Centre" on the basic network information page, the PC shows "Identifying" under "active networks" - no matter how long I leave the PC.
PC details
Model: Packard Bell Power x-30
Processor i7 870 @2.93GHz
RAM: 8GB
O/S: Windows 7 Home Premium (64-bit)
Modem Router details
Netgear N300 Wireless Dual Band ADSL2+ Modem Router
The main desktop is connected to the modem router (via Ethernet). The modem router is showing no sign of any problems itself, all the dashboard lights look ok (i.e. power is on, port 1 shows the Ethernet connection in place, both wireless bands are lit, the DSL is lit and so is the internet). The household contains a number of laptops which continue to work ok wirelessly and/or wired through Ethernet. Even mobile phones are accessing the wi-fi ok.
The DNS Server address looks ok, as that is the address of the web page to the router. I cannot access that web page (address) via the main desktop, but I can from other devices ok. Having gone through Device Manager the Realtek PCIe GBE Family Controller is showing as "working properly". I have tried pinging the DNS Server address, and that fail. I have gone through a system restore to a previous point (before the day of the crash) but that seems to have made no difference either.
I have attempted to set the IP addresses (for TCP/IPv4) directly
IP address 192.168.0.3
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.1
And therefore forced to set the DNS Server address too
Preferred DNS server: 192.68.0.1
But I don't know what to set for the alternate DNS Server, so left blank. This seems to step me forward, in that the device/network is now identified. However the internet access is still not work, as the "DNS Server is not responding".
View 2 Replies
View Related
Nov 12, 2011
I have not been able to find which port is assigned to which device in window7.in the device manager there is no reference to show to which port a device is assigned. find a port assigned to a particular device.
View 3 Replies
View Related
Feb 1, 2011
i just barely got a new computer, that's running 7, and i'm still setting all the different little things to my own liking and i need some help when i go to look at the folders, such as my computer, or the control panel or my documents, all of them, they appear with the address bar and search bar at the top, like a web site page, even complete with a back and forward button, but i severely hate that and was wondering how i change the way the folders appear? i have been all over the net trying to find it but to no avail, i did find it once, but i didn't change it at the time?
View 6 Replies
View Related
May 1, 2011
my computer apparently lost its ip address, how would i get a new one?
View 1 Replies
View Related
May 20, 2012
I wish to transfer my sympatico email adress to my new computer
View 3 Replies
View Related
May 30, 2012
my laptop has lost to find out using mac address
View 3 Replies
View Related
Dec 21, 2012
How to change email address to a new computer?
View 2 Replies
View Related
Feb 5, 2013
how to change my new email address over to the old computer ..the older computer still has the previous email address on it Now that server has closed so I need to rid the old computer of the old email address?
View 2 Replies
View Related
Jun 13, 2012
I've been working on the administrator account for more than 2 years, left it as it was yesterday. When I came back my account was assigned with guest authorization instead of administrator's. While I was working on my administrator account I disabled Super Administrator account and therefore now I am unable to log into it. My little brother account is just another guest account. So as far as I know there are two guests accounts somehow, 0 administrator accounts, and 1 super administrator account which is disabled. How can I restore my account to its previous settings? (If I try to do anything which requires administrator's level authorization it asks for password but it never works, which means that it has been changed or i do not know where can I type it in).
View 1 Replies
View Related
Nov 2, 2012
when I <ctrl>B in WORDS 2010 I don't get what I should - i.e. bold font typing - but some unclear (to me) response. How do I restore the original function of <ctrl>B?
View 9 Replies
View Related
Oct 24, 2012
How to permanently change ip address from computer windows 7
View 5 Replies
View Related
Nov 7, 2012
I was banned by my computer's ip address from a particular website and I wanted to get around that by changing my computer's ip address. My question is will this mess up my internet connection or do anything else unforseen to my computer?
View 7 Replies
View Related
