XP Mode - All Software And Drivers Must Run Together?
Feb 21, 2012
I just install Win 7 64-bit (Home Premium). I want to use several audio software applications that work through a "professional" sound card, the M-Audio Delta. This card has problems in the 64-bit drivers, and I wondered if I could use XP Mode (32 bit). But the software that drives the card needs as much RAM as possible, up to the full 8 GB I have in my machine. If I understand virtualization right, XP mode will be 32 -bit (well *I* need 32 bit in order to use the right drivers) which means it will not have access to all my memory. I could run my audio software in Win 7, but then it's a different "virtual" machine and it would have no access to my sound card. if I install Win 7 *32 bit* now, just to get things working, can I do an easy upgrade to 64 bit without losing my data?
View 1 Replies
ADVERTISEMENT
Nov 21, 2009
So a while back i fished a working dell laser printer out of a dumpster at school. i had it working with xp just fine, but i cant seem to find win7 drivers for it anywhere but dell's shitty website where their download manager wont even recognize that i have the drivers in my list. with the virtual xp mode in win7, can i use the xp drivers with the printer?
View 5 Replies
View Related
Oct 25, 2009
Do I need to install hardware drivers in XP mode also. I have only took a quick peek at it as of yet so haven't checked the device manager to see what is says.
Update: It shows alot of Intel devices for my LAN and vid card when they are not Intel they are both Nvidia stuffs. And why is it auto hiding the IE8 update? I clicked to restore but did not install it but when I went back after the reboot from the other updates it hid it again...is there a reason for the hiding of this update? I most likely will rarely ever use XP mode since everything I use worked with Vista and when I get everything installed again on 7 I don't think I will have too many problems.
View 5 Replies
View Related
May 11, 2009
i've installed Windows 7 RC1 and its working beautifully!
i'm working from home with a software called Avaya 6
this software work good in vista but no in Windows 7 rc1
i've installed win xp mode and the software work but a message from the software showed up and told it it doesn't have any sound devices...i looked up in device manager and it was correct..
any ideas for drivers?
View 3 Replies
View Related
Nov 27, 2009
One of the things you may discover is that not all of your older programs/games/drivers will work under 7, and their 7 compliant versions may not be availabe. In this case, you can try install and run them in Vista (or XP) compatible mode. To run a file in compatibility mode:
1. Right click on the executable file and click the "Properties" option
2. Select the "Compatibility tab"
3. From the drop-down menu, choose the operating system to run your file compatible with
4. Click OK
5. Run it "Compatibility" tab explained by Microsoft
If compatibility mode does not help, you can try force windows to use the standard device drivers:
1. In Device Manager, right-click your device (e.g. video adapter), and then click "Uninstall" to remove the device.
2. Restart your computer. After you log on, you receive a "New Hardware Found" dialog box with the device listed as the description and the "Found New Hardware Wizard" starts
3. Click "Next" to start the wizard
4. Click "search for suitable driver", and then click "Next"
5. Click to clear all of the search option check boxes, and then click "Next"
This way windows can install a standard driver for hardware like VGA, fax modem, printer, etc.How to force Windows to use a standard VGA compatible driver
View 1 Replies
View Related
May 4, 2009
I have a old creative Live value sound card which only worked in XP the vista drivers were never released, so can I connect that card & install the XP drivers in XP mode & make the card usable under windows 7 XP mode? That Card does not have windows 7 drivers either.
View 2 Replies
View Related
Jan 29, 2010
I have been adjusting my DRAM timings in the BIOS and lose the ability to reboot onto Windows 7 64-bit. So, I power down and reboot and I get a black/blank screen and 2 beeps from the MB. So, I turn off my computer and I have to remove my Graphics card to access the OS again. Can anyone suggest an option or two that will help me restore to SLI mode?
View 8 Replies
View Related
Dec 10, 2011
My laptop just shut itself down saying something about it being damaged if it didn't. I didn't see the error myself someone else was on it at the time. It will not boot in any mode, safemode it gets stuck at random drivers it won't even boot from my OS disc to repair. It will load all the files from the disc then it shows the initial Windows start screen then is just black with the mouse pointer.
Toshiba Satellite a665-s5173
Processor Intel - core i5-480m processor
Operating System - Genuine Windows 7 Home Premium (64-bit)
Graphics Engine - Mobile Intel HD Graphics
View 1 Replies
View Related
May 16, 2011
I used clonezilla to copy the data on my laptop drive to an external 640gb drive I had. The cloning process went fine but when I went to boot on the 640gb drive I (expectantly) got a blue screen error. Now, the way to fix this would be to boot into safe mode and delete the drivers but for some reason every time I boot and press the f8 button it brings me into the Windows Error Recovery mode menu which has no options for safe mode and doesn't help at all.
View 8 Replies
View Related
Oct 6, 2012
I have this windows 7 for year and not have problems until now. Now the windows doesn't respond when it works and only the mouse fan move, but with cursor in position of loading. ctrl+alt+delete doesn't work and only shut down the computer can work. I tried use "safe mode" and the sound driver didn't work. I succeeded to do recovery two times but the problem repeat on itself. I tried to scan for virus but there wasn't. How can I handle it?
View 4 Replies
View Related
Jul 13, 2012
What do I need to do? I can't get on the internet, use my mouse, or do anything. I used the bcdedit.exe command and the watermark went away, but its still acting like its in test mode.
View 4 Replies
View Related
Feb 13, 2011
I have what most of you would class as a legacy machine. I self build this pc just before AGP got phased out, then had a kid and now cant afford to continue rig building.What I have is what I have, upgrading components isn't an option, unfortunately.So I have had a GeForce 7600gt card running in my rig for some time as that was, as far as I knew, the best AGP card I could get (didn't really want Radeon as nVidia have always been great)Recently I upgraded my Little Bro's pc for him and stumbled across the ASUS AH4650 AGP, which I gather is just the Radeon re-labeled. With a little bit of frigging about I got it installed and working fine on his machine and thought it would be great in my rig.
Off I went and purchased myself one, deleted all the nVidia drivers and stuff in safe mode using driver sweeper. Ran ccleaner to make sure all residual stuff was gone. Installed the card and rebooted.This is where the fun started.I have tried installing the current Catalyst Control centre for AGP, device manager see's AH4650 but I get "no ati drivers installed or installed incorrectly" or something like thatremoved everything and installed the AGP 11-1 Hotfix, device manager see's AH4600 series but I get "no ati drivers installed or installed incorrectly" or something like thatremoved everything and installed just the drivers manually, device manager see's AH4650 but I get "no ati drivers installed or installed incorrectly" or something like thatI have tried many of the suggestions here but always seem to be coming to a loss and I'm not a noob when it comes to PC's.
It's bound to be something to do with the nforce3 drivers conflicting but obviously that was unsupported pretty much as soon as vista came out.this is driving me mad. I don't really want to have to return the card. I dont play games on my rig it's more for HTPC but the 7600gt is struggling with High Def and Bluray stuff
View 9 Replies
View Related
Feb 28, 2012
blue screen hard drive 0x0000007b 0xf9e4d528,0xc0000034,0x00000000,ox00000000 can not load safe mode what am i to do wont re store just the blue screen
View 1 Replies
View Related
Nov 15, 2012
my computer, a Lenovo Idea pad P580 running on Windows 7, is 5 weeks old and yesterday I was using Microsoft Word to edit a document and Word suddenly crashed. So I closed it, but then the cursor started spinning and I could not access anything on my computer so I rebooted and it started up but then just trying to open Microsoft Word caused the cursor to keep spinning again and I could not access anything. So I again rebooted and this time it was spinning from the beginning. So I again rebooted and turned it on in safe mode and everything was fine. Then turned it off and left it off overnight. In the morning I tried to boot in normal mode and it did boot but it was again spinning and I could not access anything. So I again rebooted in safe mode and I can use my computer fine.And also, this is unrelated, but I was wondering if anyone could tell me what I need to do to make the scroll bar stop moving on its own? Every time I scroll down a page it seems to lock the scroll bar and so when I move the cursor away from the scroll bar, the scroll bar still moves and I cannot click any links or anything on that webpage.
View 6 Replies
View Related
Aug 1, 2011
the computer I am concerned with is running Windows 7 with IE8, Microsoft Security Essentials and Malwarebytes Anti-Malware. I am currently in Safe Mode with Networking without issue.The owner of the computer says that something happened earlier today while he was online that sounds like some false antivirus popup, but he's unsure. Here are the symptoms in normal mode. Every application, from moving through them to opening and closing them, runs exceptionally slow - one to three minutes to open, at least a minute to open internet pages. I noticed that, when in IE, as the pages are loading the IE page disappears and reappears. I am not very familiar with Windows 7 so I don't know if it is related. The computer seems to be getting slower as the day goes on. CPU usage is very high.So far, I have disabled many startup items that were unnecessary. I ran CCleaner and cleaned up. MBAM was run in both normal and safe mode, full scans, and found nothing. This is also posted in Viruses and Malware, but I'm unsure where it should live.
View 2 Replies
View Related
May 8, 2012
window 7 working on safe mode and unable to choose the another restoration point and it is not loading in normal mode -after installed third party software worked on that for few hours, then after switched off and later it switched on then after this problem started, automatic repair done, nothing is notified
View 1 Replies
View Related
Nov 25, 2012
i recently ran into a problem with starting up my computer. I have the blue screen of death. I've tried safe mode. It won't work. I would click safe mode it would load and then go back to the blue screen. I have a lenovo laptop and I'm not trying to pay 150-200 for it!
View 3 Replies
View Related
Oct 8, 2012
I own an HP G-62-347 Notebook, Windows 7 64 bit, Microsoft Security Essentials, Windows Firewall, no other real time AV, no other Firewalls, Windows Defender disabled as Microsoft instrucs for MSE, 3 GB Raam, 313 GB HDD, AMD Dual Core P-380 processor.My Laptop began freezing 8-10 minutes after bootup logon. No matter what I was doing, Media, Excell, Word, it would freeze up and hang. Sometimes CTL_ALT_DLT would unfreeze it, even before the task manager appeared, but it will take 3-4 minutes with an o[ague screen and the progress "circle" moving then unfreeze, sork 1-2 minutes, freeze, etc. Then all clicks on something to activate would result in loooong (long) delays, 15 to 45 seconds, then the new screen or window or peogram would open, sometimes frozen up.This did not happen in safe mode.I have (on suggestions) removed all things from my start up or programs that other's have suggested, Google Update files, and three or four others that others had issues with that I found on the net. I have also removed programs that I had installed around then.
I have also run, in Safe Mode, MSE, MS Safety Scanner, MS malicious file remover, ESET online Scanner, my laptop is clean.I have used mscong to disable all non-microsoft items to see if that helped. It did not. Same issues.I have used startup repair, and after scanning received a message that there was a problem, but that it could not fix it, did I want to send a report to Microsoft, I checked yes and it sent me to System Restore, ran it for about a week ago which was when I had downloaded some software, and the problem still existed, which sent me back to System Repair, ran it, same error message, reported again.I used a Repair Disk to get back on the laptop a coulple of times when needed, but ultimately, the problem surfaced still.I have used ReImage Plus to rebuild all my defective Windows Files and a lot of my 3rd party defective files. And, I also did a Win 7 repair install.I am pretty convinced something is being loaded somewhere, but can't find where or who or what.Am I on the right track? Have I missed something? Am I wrong? I do not really want to do a clean re-install of Windows 7, for if I do I am reformatting everything to clean any and everything.... sort of NUKE it... but would rather find the culprit (for education purposes). And, I dislike installing and updating and setting up everything again more than I hate "boiled okra!"Anyone and Everyone that has had to do with this or similar sounding issue, please reply. I have two weeks invested, and would like to "graduate" resolving this and getting the learning experience of WHY?
View 15 Replies
View Related
Jan 16, 2013
I am using acer laptop,intel Pentium processor,windows7 professional os,my problem is windows is not starting normally and is running safe-mode.when entering normal mode it is displaying "welcome" after entering password "Please wait",it takes a long time to starting window and i'm waiting more than 24 hours but its not starting window normally...but it starting safe mode.
View 1 Replies
View Related
Feb 8, 2012
I have been getting BSOD errors whenever booting into regular mode. Safe mode is fine (I have tweaked the registry so I have sound in safe mode) My system specs are in my profile, but used Winaudit for full specs. The winaudit report in formatted text is too big for an attachment. I have 2 attachments to this post, including zipped up minidumps. Could my registry tweak for sound have something to do with this? Perfmon /report was run, but it says:
An error occured while attempting to generate the report. The system cannot find the path specified.
View 6 Replies
View Related
Apr 25, 2012
My laptop hangs up/ freeze in normal mode. Now I can only open it on safe mode. I was only copy pasting some files couple days ago when it happened. I have to hold the power button to turn it off. I already tried system restore and reformatted it twice. I'm using HP Pavilion dm4-1160us, windows 7 64-bit.
View 12 Replies
View Related
Nov 2, 2012
Today I wanted to intsall Windows 8 in dual boot envirnment with Windows 7 so I created a separate 60gb partition for Windows 8 but after the partition was created, all the previous volumes like Windows 7, HP_Recovry and HP_Tools and the newly created Windows 8 partition are now dynamic plus I can't install Window 8 on that dynamic partition. Below is current situation as shown in disk management in Windows 7: [URL]
I don't want to lose my data including the Windows 7, and HP_Recovry and HP_Tools partitions. clean method to go back to basic disk mode from dynamic mode without losing data. When try to convert from dynamic to basic using easeus utility, it gave me following warning: [URL]
View 3 Replies
View Related
Apr 26, 2011
I have installed the 32 bit driver for my Minolta 1300W. I can print happily in XP mode but I don't seem to be able to be able to use the printer in the Windows 7 host (64 bit Pro). Should I be able to see it as a printer if I attempt to print a document in Office? Launching the application doesn't help.
View 2 Replies
View Related
Oct 5, 2012
I can't boot my computer in normal mode or safe mode. When I try to do so, after the "starting windows" page the only things that come up are my mouse, a black screen/background, and a "logonui.exe-bad image- Authui.dll isn't designed to run on windows" error/message (not the exact message). I can't use a system restore (it can't find a restore point), the image recovery tool finds no image to restore from, system repair either doesn't find a problem or can't fix the problem, and basically nothing else works (none of the advanced boot options or other various buttons and tools do anything noticeable). I've even tried to use sfc in command prompt, but whenever I do any sfc things at all (/scannow, verifyonly, verifyfile, etc.) it says there is a system repair pending that requires a reboot. I've restarted 7-8 times and the exact same message keeps coming up. I'm looking for any general help I can get right now, [I can post my computer specifics in an hour when I have time](posted a few). I have an HP pavilion dv6-6135dx wiht Windows 7 x64.Processor: AMD a8-3500m APU, raedon graphics bios vender/version: insyde, f. 20.I'm having trouble getting more info because my computer is still crashing occasionally and I don't really know what else is relevant; if you need more, I might need directions on how to get it. Especially if it involves command prompt.I should also add that it has been crashing more often than I think is normal ever since I got it, but recently it BSODed 3-4 times a day. I have antivirus and also ran a full malwarebytes scan yesterday, and it only found one little issue which was resolved.
View 7 Replies
View Related
Aug 13, 2012
Windows 7 x64 does not boot into Safe Mode or Safe Mode with command prompt. Normal mode boots perfectly. Are there any suggestions on how to resolve this? I've tried startup repair and attempted fix boot, etc. No affect. The unit is free of infection. I also tried using SFC, but it said everything was fine.
View 6 Replies
View Related
Sep 17, 2012
So I am having trouble with my computer since last night it started to give me the blue screen of death every 10-15 minutes with all kinds of different reasons. I cleaned my pc, searched for viruses as much as I could, and I have restored to a different point in time twice. I have tried the windows memory diagnostic twice. No issues. I have tried the files check before start up, no issues were detected.Pfn_list_curruptan attempt was made to write read only memorysomething on the lines of service_system_exeption? Not sure about the last word to be honest I caught it while my computer restarted on its own. Memory_ managment Bad_pool_errorI am not sure what to do I have done all I can by myself. I will be doing a complete restore to manufacture settings after I get something to back up my files. In the meantime maybe I can figure out if it is a hardware issue or if there is something else currupt.
View 2 Replies
View Related
Sep 17, 2010
How do you stop laptop from going into hibernation mode / sleep mode?
I run a program that takes 8 hours. I need the laptop to stay awake.
View 1 Replies
View Related
May 24, 2012
I seem to be having quite the problem on a computer of mine. After recently installing the directx sdk I am unable to logon through normal or safe mode. When I try to boot up normally, I log in but then the monitors go black but everything else seems to run. Pressing ctrl alt delete works and brings up the screen again but if I try to select task manager for example the screen goes black again. When I boot up through safe mode the computer restarts seconds after loading the windows logon screen.
View 2 Replies
View Related
Apr 12, 2012
windows xp mode not working properly. When reinstalling it says "windows xp mode already installed". I cant install the virtual pc associated with XP Mode.
View 1 Replies
View Related
Oct 28, 2012
I have a Laptop HP pavilion Dv4 my graphics card is AMD M880G with ATI Mobility Radeon HD 4200, my processor is AMD Turion(tm) II dual core mobile M500. The thing is i was playing Tropico 4 and i paused it then it began to mix pixels i couldn't see nothing, then i restarted and this is what happens:I cant see nothing, all is mixed up. on safe mode runs well.I played driver san francisco, fallout new vegas before and any of this happened.
View 44 Replies
View Related
Nov 25, 2012
I have Windows 7 on Laptop. My mouse stopped responding in the Windows normal mode but functions fine in the Safe mode. I restarted the laptop several times but the problem remains.
View 3 Replies
View Related
