XP Drive Formatted And Windows 7 Drive After Installation Windows 7 Not Working?
May 8, 2011
all i want is if c drive(having xp) formated then how can i recover win 7 on d drive?i am trying to resolve this problem from alot of time but i cant find this on internet as well.let me tell u the scenario i am installing xp on c drive and win 7 on d drive but if xp drive is formated and again xp installed on c what should we do to bring back windows 7 .i tried alot of things like easy bcd vista downloader windows 7 startup recovery tool with commands like bootrec /fixmbrbootsect.exe/nt60allbut it dosent work,,i thought i should ask u guysi noted that 7 install 3 files on c drive that are bootmgr,etcif i keep these files back up nd replace it after installation should it workits really messed up man.
I am having problems installing windows 7 on a fresh, formatted drive, it keeps telling me I don't have enough space to install windows seven on the drive, but its a 500gb Hitachi deskstar.
I have a custom built pc, has quad core phenom processor 4gb ram. Gigabyte motherboard 500gb hard drive with windows 8 preview installed. And a formatted 250gb. I'm trying to install windows 7 on the formatted drive but every time off cd hangs on expanding files. So I thought I'd try USB stick. Got a 16gb cruzer blade. Formatted and made bootable. Windows on it. Will start via my computer but whenever I try booting it on standup I get an error about not being digitally signed. I've tried numerous things but will not boot from USB.
My dvd drive was working till the installation dvd was booted. After that once Windows 7 started, I tried putting many dvd's in but they all say "Please insert a disk in Drive d:" and tray opens up.
I have a problem for a Mac formatted WD My Passport external drive. PC recognizes the WD Smartware part of the disk but not the data. I want to reformat the whole drive to Windows 7, but I can't see any options to do that.
I have a 1.5TB Seagate ext HD that is formatted as MS-DOS (FAT), this was formatted on my iMac. The Mac internal HD has completely crashed. I attached the ext HD to my Toshiba Satellite laptop, the ext HD does not show in the drive list. It does show in the device manager. It also shows as working properly in the properties menu I need files from this drive. How do I get my Windows 7 system to read the ext usb drive?
My former hard drive with my MBR on it failed. This hard drive was/is 750GB and when I purchased my 'main' 2TB hard drive I made another fresh install of Windows. In other words, I had two installations of Windows on two separate hard drives. However, the MBR is located on the now-failed 750GB hard drive, and so my 2TB install of Windows won't work. I have tried (and failed) at repairing or otherwise installing a new MBR on the 2TB hard drive.
I'm facing unexpected shutdown( blue screen error) so many times and my system going not responding so many time. Gaming is smooth (hd 7750) but sometime game stuck for 2-5 minute. I've to format my system windows drive every week.. backup doesn't work and now when I try to shutdown it's not going shutdown. It just shows that it is shut downing but even after the 1 hour it doesn't..
My system spec (3 year old): Windows 7 32bit, Intel c2d e7500 2.93ghz, 2gb ram ddr2, Intel dg41rq mb, Odyssey 450w psu 14a on 12v rail, ATI hd7750 graphics. WD Wavier blue 320 GB hdd 8mb cache
i have a mosebear 4gb pen drive which now cannot be formatted nor edited. adding new contents is also not possible. As i insert my pen drive in usb port a message appears " you need to Format the drive before use... and as i try to format it pushes an error msg you donot have sufficient rights to perform this operation".. I tried cmd command to format it but there it states "please insert a disk in drive i".
I borrowed my friend's external hard drive and a I first connected to my PC it was working perfectly. Yet the second time I tried to my PC recognized it but couldn't open it & it kept giving me the message that I need to format the hard drive before using it. I tried many time on different computers & I got the same result.
I have a fully legal, licensed, paid for etc. version of xp.
I really want to format my hard drives (completely)....my question is:
do I need to re-install my xp, get all the updates (SP2, 3, etc.) before running a clean install of Windows 7 Upgrade Version? Or can I start right from the Windows 7 disc and use my xp key/disc if required?
I know I could do this when going from '95 to xp (yes I'm old).
I hooked up a a mac formated drive to my pc. It didnt show up. so I went to disk manager and looked at it in there once. a option box came up listing something about a boot drive or GUID. I picked GUID and down the drive still has the info on it but will not show allow ascces on pc or mac.
my computer crashed when my brother turned it off while eagle eye was reading. i had to reformat the drive and I lost all data, including kodak easy share software. I was not able to restore the program because the installation disk is missing. How can I restore kodak on my computer
I formatted my C: (win 7 64 bit os), bt on d way realized that my most imp data was kept hidden under C:UsersPrashant , but couldn't help stopping the format.
Now, since the C: drive is formatted , I can't access C:UsersPrashant , so is there any way to recover back my "mostttt imp data"..
I was working with two drives and mixed them up on a format. What is on the drive isn't essential, but it would be nice to see what was lost, so I can go from there. Can anyone recommend a way to get it back? It just happened and I haven't put anything else on the drive since it happened. Hit Quick Format, and stopped the formatting about 10 seconds into it, sucks
While i was formatting my LG 2.5" External HDD HXDS 320GB the power went out. The result is that I cannot use it because Windows want me to format it and it cannot be formatted.
Have formatted this disc 2x and still get Bootmgr missing error, wont take a new install of an OS. Originally had windows 7, have key but no install disc for that, tried installing XP and could not get to bios?
1. Is it a bad hard drive?
2. Is it in the motherboard?
Is there action I can do? Pc will only allow for ctr. alt del which gets you back to square one again?
My harddrive have 3 partitions. I accidentily formatted the one that I need. The Windows files are not in there, but almost every programs that I installed is installed in that partition. Now, I could launch any program, it says Avast snxhk.dll is missing. If I try to launch a portable program from my use, I get this "file system error (-1073741515)" message. What should I do?
I have had no trouble in the past setting up permissions on a NTFS formatted USB drive using XP. I am able to set everyone to have only read access and myself to have full rights. The process is as follows:
- Remove all from the list except everyone. - add myself as a user with full control. - Go to advanced options for everyone and disable write access, and enable read access. - Deny takes over allow, so that's all good. - Eject USB everyone's happy .
In Windows 7 this is not the case, after formatting the USB to NTFS and going to permissions, that is where the problems start. At first the only group that has permissions as default is everyone, if I change any of these permissions I get access denied even though I am the owner because I formatted the drive. So I ignore and continue to add myself as full control. I get access denied! I then move on to making it so that everyone has read access but no write access. again access denied! What is the same process ins XP is not the same in 7, why?
It seems every time I make an amend to a permission in 7 is says access denied even though I am the admin and the owner. Tried this also on the hidden admin account and I still have the same problem. My guess is in windows 7 everyone actually means everyone, including admin and myself, so even though adding myself as an additional user it still wont allow, unlike XP where adding a user seems to overwrite everyone.
I have drive on my hard disc (f contains my important data, and I encrypted it using bitlocker program which comes with windows 7 , accidently the drive had been formatted and the drive was locked (data is encrypted), I tried to recover the data using some recovery software but it's not Working because the data is encrypted and the SW can't see the data , please any one can help or advise to solve that disaster , I lose very much important data and I don't have backup .
Note: I have the password and the recovery key that decrypt the drive but I don't know how to use it because the drive after format back to its normal condition (bitlocker set off)
I have a 1tb external hard disk which was working fine till yesterday. It fell down last week. After that, I transferred two files (total of 25gb) from my laptop into the external hard disk yesterday. The problem started after that. When, I tried to open any of all the files (a total of 11 including the two I transferred yesterday), it's suggesting to be formatted. The external hard drive is recognized in the disk manager to be healthy. Currently, I have turned the Easeus Recovery software on, it's showing 12 hours to be completed.
I formatted my encrypted hard disk of 500 GB by mistake for 2 to 3 seconds.Now, it is not opening. Instead it says---" Disk structure is corrupted and unreadable". What should i do open it?
I had encrypted my C drive with bitlocker. It worked fine for 5 months.After 5 months it was giving problems, so I took help from brother which suggested to reimage the machine with Windows 7.I did the same, however during installation of Win7 it showed drive C and Drive D. I deleted the Drive C and its gone, tried to refresh the windows however still was not there, so now installed Win7 on only remaining drive.I had 500 GB of hard disk divided in 2 partitions. Now I only see 224 GB in My Computer.I don't want to recover my data from encrypted drive; however I need that space of 250 GB.
I am trying to access my wife's macbook hard drive via my Windows computer using the Vantec SATA/IDE to USB 2.0 Adapter. The Apple techs said they could not get the drive to register when they hooked it up. However, we gave it a good drying with blow dryerThe adapter works fine and all the correct drivers installedI am in disk management and the 250GB drive seems to be showing up. However, it is not showing up in My Computer and right click shows "assign a letter" is grayed out.
I'll get right to it cause this is serious for me and I screwed up royaly. My original OS Windows 7 was on a normal hard drive and I installed a second copy of Windows 7 on a new SSD drive that I got and used it as my primary and left everything on the old one just didn't delete it. When the time came for me to finally say bye bye to all the previous items on the former drive since I was now using the SSD for OS and applications I formated using the Windows 7 startup disc. I cannot boot from the SSD nor does it even show in Device Manager (I'm gonna check the connections for that) This information is still recoverable I know but what's the best way to go about it. Will I be able to use the SSD to boot widows again if I repair this one thing? Can I at least get my files back somehow?
My only Windows DVD was an upgrade disk I used before on the same computer a few months before. I used the command prompt on the DVD to create a NTFS partition for the OS to load onto. After that everything installed and worked fine until I tried to activate use the upgrade key, it says that it can only be for upgrading and not clean installations. I was under the impression that since I already used the key to upgrade on the computer, I would be able to use it again. Will I need to buy a new install disk or will I be able to activate the OS another way? If I do need to buy a new install disk, would it be possible for me to simply find a X16-96072 Windows 7 Home Premium iso and use the activation code that my computer came with to provide the upgrade code with?
