I was connected to my neighbors wireless network via Linksys for several months, but after he had it shut off and reconnected they gave him a different IP address, ID and password. I have all the passwords and the signal shows up, but it is continually "aquiring a network address". Does he have to change something in his settings to allow access once again?
View 1 RepliesI have recently been having difficulties with connecting with my wireless connection. We have a in-home router that is connected to two computer's downstairs by cable. I however own a Acer, Windows 7 laptop that I mainly use upstairs and I get a Excellent signal strength.I have connected to my Home wireless connection before with no problem but recently the connection keeps coming up as ~Identifying... No Internet Access.Also when I have had connection to this network prior to this problem the connection is under Home. But when I try to connect to the same network it comes up as Public or just keeps Identifying. I have the connection set to Connect Automatically.Also the yellow triangle with the exclamation point almost always pops up immediately when I reboot my system or after I Disconnect and Connect the network again. I have tried Disabling and Enabling the network in the adapter settings and this does not work either. In the manage wireless networks tab, I have repeatedly deleted the connection and reentered the security password and again put it as automatically connect but it still comes up as Identifying. I have seen many people with this same problem and have tried many of the suggestions to no avail.It is rather bizarre because my connection will be in this Identifying state for a while and randomly connect properly and I have no idea what makes it go off and on so erratically. I just had it working again for a few days and it is again acting up.
View 4 Replies View Relatedm using toshiba satellite L640 when i try 2 connect 2 internet it keeps on acquiring network address and shows limited connectivity in windows 7 home premium..
View 1 Replies View RelatedI recently purchased a wireless router and we have three laptops and a desktop using it. All other stay connected except my notebook which has windows 7. I also recently downloaded skype to talk to family overseas. Almost every time I am having a conversation, I suddenly lose the connection. However, I lose a connection at other times also. Skype doesn't have to be running for it to lose the connection. There seems to be no ryhme or reason for this. I ran a scan on my virus protection, but it reveals no threats. I am not so computer savvy either, only the basics.
View 2 Replies View RelatedI have an Atheros AR928x Wireless Network Adaptor and need to change its configuration for our XBox to connect to the internet. how to determine the IP address to gain access?
Sony Vaio with Windows 7 Home Premium - Svc pk 1 -
Recently when I try and connect to the internet my wireless connection network says it is an unidentified network with no internet access. This never happened before.
View 2 Replies View RelatedAcer Aspire 7745 Notebook (purchased 10/25/2010)Win 7 HP 64-bit (build 7600) (last update 11/11/2010)Broadcom 802.11n Wireless Adapter (5.60.48.35)Since the last update, the wireless network keeps dropping its connection randomly. Windows Network Diagnostics says it can't connect. Status shows limited connection. Manual disconnect and re-connect says "Not in range" although it shows in the available networks with strong signal. Disable and re-enable causes the entire system to lock up and I have to power down. The only reliable way to reestablish a connection is to reboot or wait some random amount of time until the system decides to recognize the wireless network again.
View 9 Replies View RelatedI have an HP desktop running Windows XP Pro and I network to an HP notebook through a wireless router.I recently purchased a Gateway Laptop with windows 7 Home Premium. It found my wireless router immediately and I was able to get on the net. It also found my HP desktop so I could share files.The problem I am having is with my network printer. It is an older epson stylus photo r320. Epson says that windows 7 has a driver for this printer and if I plug the printer directly into the laptop using the usb connection wiindows 7 finds the printer no problem. If I try and have windows 7 locate the printer on the network it can't find it.
View 2 Replies View RelatedHow do I activate wireless connection?
View 1 Replies View Relatedthe wireless network connection adapter is disabled how to make it enabled
View 1 Replies View Relatedmy computer has no steady connection to the wireless network
View 1 Replies View RelatedI have a 3 PC router based workgroup network. 2 PCs are XP SP 3, one PC is Windows 7 When all PCs are wired, everything works just fine. All PCs (W7 and XP) can see and share files with all other PCs (It took a bit of doing but I got there eventually)If I try to connect the W7 PC wirelessly,
* the W7 PC cannot access/share files on the XP machines
* the XP machines can see and share files on the W7 PC
* The W7 PC can access the router and can ping the other PCs
There is no firewall in operation on the XP machine What do I need to do to get the W7 machine to access/share files on the XP machine via wireless connection?
Alright I am running Windows 7 X64 Bit. I am running a Linksys AE1000 wireless adapter with a Linksys router with Comcast cable. Anyway here is my problem. Before I didn't have to configure the IP4 settings as it was set automatically obtain IP and DNS settings. But now I have to put in those values manually to get online because if I don't I get the unidentified network in my the network area.I have done the following setting adjustments:-Disabled the bonjour service.
View 1 Replies View RelatedI tried to update avg on hubs laptop so the kids can play and now after I did it we can't get online period!! on the tool bar were the connection pic is says limited connection? So I did all of the steps to fix ect and it finally came up to.
- There might be a problem w/the drivers for the wireless connection2 adapter
- There might be a problem w/the drivers for the local area connection adapter
MY actual modem is good as we have 3 running right now - should I go to restore point before avg in the critical update moments before I realizes this problem?
Just reinstalled my windows 7 home premium after having some issues and thus far everything is working swell, except for the fact that I can't seem to find any wireless connections under connections available- I can't even seem to set up wireless connections.
I know nothing is wrong inside the computer since my splash top allows me to go onto the internet wirelessly- so I'm guessing this has something to do with me just installing windows 7 home premium again.
Without the internet I can't download drivers or get windows updates-
Looked in device manager and there are three exclamations next to these drivers:
standard VGA Graphics Adapter
Network Controller
Unknown device
Can't seem to fix the exclamations since I can't get internet access (only have wireless net) Is there anything I can download and burn to get these drivers working?
In our office we have our PC's connected to our inter-office network server via the Ethernet ports (Local Area Connection) with a hard wire to a hub, that in turn runs to our server. We also each have a wireless internet connection on our PC's via a USB wireless adapter. When we were using XP this was not a problem to have access to the server AND the internet at the same time.
When my PC died last year I bought a Dell Inspiron 560 slim tower with Windows 7 to replace my XP machine. The first problem I ran into was that I could no longer use the wireless internet connection AND the hard wired connection to our server operating at the same time. If I stayed connected to our server, I will not have a wireless connection. If I go into the "Local Area Connection" properties and "disable" the connection, I almost instantly get my wireless connection back. The big issue when doing this is if I leave our database program (ACT!) open while the server connection is disabled, I have to shut down ACT!, then restart it before I can connect it to the server. If I try to without closing and reopening it I get all kinds of errors.
So, in the mean time, I have just put a shortcut on my desktop that allows me to enable and disable the Local Area Connection when I need internet access.
A couple days ago, my boss's PC grabbed a virus that slipped past McAfee (that program is now gone!!) and really hosed up his PC. He bought the Windows 7 upgrade software and wiped the hard drive and installed Windows 7. He is now having the same issue as I am.
For what it's worth, he is using a Belkin Wireless-G USB wireless adapter, and mine is a Netgear Wireless-N USB adapter.
Is there any way we can have the two connections operate at the same time like they did in XP? It really becomes a pain sometimes when we are on the phone with a client and we need to jump back and forth between info that is online, and info that is on our server that we access through ACT!.
"Problem with the driver for Wireless Adapter".I have an HP-Pavilion 2009f with Windows 7 home premium 64-bit. All has been fine with my internet connection, except for a few drops here and there, but all in all it has been tolerable. When I went to bed last night it worked, when I woke up, it didn't. When I troubleshoot I get the message, "There might be a problem with the driver for the Wireless Network Connection Adapter", to which Windows cannot fix. I get this same error message, respectively, for both wired and wireless connections. After troubleshooting without success, I decided to try and do system update.I am only connected with "Limited Access".What's even weirder is when I open a cmd window and enter ipconfig /all.
View 2 Replies View RelatedAs you can see today when I got on my laptop I wasn't able to connect to the Internet and after attempting to troubleshoot I got this error message along with one saying a network cable is not properly plugged in or is broken. We recently switched Internet service providers and the Internet has been running fine. The only proble I had was sometimes it would randomly drop in speed but I don't think that has anything to do with the issue. Last night it was working perfectly, but then it went slow so I unplugged our router and then disabled the wireless network then reeanbled it. Anyways I've been using this network for a few months now without issues but I think the issue lies within my computer. I checked for windows updates and installed them but no luck. Then I checked for driver updates for my adapters but they were up to date. I don't have any screenshots and I'm on a tablet. Also please use the simplest terms possible because while I have a basic understanding of these things, I'm no expert and I don't want to miss anything
View 1 Replies View RelatedIf you have time to help me solve this problem I would really appreciate it. First off, I have a Samsung NP350V4C notebook with an Atheros AR9485WB-EG Wireless Network Adapter (currently up-to-date), the system I'm running on is a Windows 7 Ultimate x64, and my router is a TP-Link WR-740n. As of now,
I can connect to our router and internet nicely, but this is only possible because I just restarted our router. And probably (100% sure of it), if I restart, reboot, sleep my notebook, or simply press the disconnect button on my wireless connection list, I would have difficulty connecting again. By difficulty I mean, my notebook would continuously try to identify the network, and in between identifications says "no internet access" with a yellow triangle with an exclamation point on it.
So, again I have to restart the router just so I could connect my notebook to get wireless connection. Troubleshooting the network (by clicking on the red "X" mark on the network map between the home network and internet) doesn't help either. I also tried the ipconfig /release and /renew... does not help either, it just says media disconnected and such. One thing that amazes me that my notebook can connect to home wireless network flawlessly
I have three different wireless networks I can connect to, but the one Windows connects to first by default is not my first choice. I'd like to reorder the connection priority. Problem is, as you can see, no networks show up in my manage networks control panel! It clear as day shows that there are five choices, but, does not list them for me to prioritize! Is there a setting somewhere I'm missing that will make the networks visible?
View 6 Replies View RelatedI cannot access my internet and don't know why. When i try to access the internet it says I have 'limited access' although I have a full internet connection. Does anyone know how to fix this please? I have a Windows 7 operating system
View 9 Replies View RelatedDhcp is not enabled for wireless network connection 2
View 1 Replies View RelatedI have Avira Virus protection on my desktop PC connected to the internet via wireless adapter, and lately I have been getting the little pop-up that says "your wireless network connection is ICMP flooded". this happens literally more than 20 times a day just by doing everyday activities on my computer. I have looked on the web and followed instruction on what you could try to do but nothing makes it stop. I don't notice anything strange like a virus on my computer either.
View 4 Replies View RelatedThe computer which has the problem is an Acer Aspire X3400, 64-bit operating system. I get the unidentified network no internet access thing come up when i click on the little symbol at the bottom which has the yellow warning triangle infront of it. I have tried disabling the connection and restoring it. Releasing the ip and renewing it. I have tried to update the driver (ethernet cable) but it says it is up to date. In the driver management there is a yellow triangle next to the USB network interface.
View 1 Replies View RelatedI have a canon printer (couple years old) and a Brothers printers connected to a computer with Vista 32bit. I just purchased a laptop that has windows 7 64bit. I can connect via wireless network to my Vista computer just fine. I was able to connect to and install the brother printer but when I try to install the canon printer I get a message something like this "Cant find INI file, will look in windows update" after a while it comes back and says It can find INI file. Probably it is because my Vista is 32 bit and my laptop Windows 7 64bit. But I did not have this problem with my brother printer. How do I install the canon printer?
View 7 Replies View RelatedM wireless is flaky to say the least. Realtek 8185 adapter connects sometimes to the interwnt but is painfully slow. Drops connection all the time. My network name changes intermittently between "xxxxxx" and "xxxxxx 2", my network switches between home and public.
View 2 Replies View Relatedi have an HP touchsmart computer running windows 7 home premium 64bit and im in the army living in the barracks so my only internet source is a hotspot that they have set up for us in the barracks my problem is that when i try to connect to it it says "Wireless Network Connection dosnt have a valid ip configuration".i have went through the cmd and did the ipconfig/all, ipconfig/release, ipconfig/renew with no luck iv reinstalled my drivers for my wireless card this is what i got with my ipconfig/all. [code]
View 5 Replies View RelatedIs what i get when i run the internet trouble shooter. I try to find a wireless network on my laptop and i connect to one but it sometimes it says (when i go to network sharing place) that it is an unidentified network. i try connecting to others but i don't know the security key.
View 4 Replies View RelatedSo I'm having a major problem with my laptop. Been fine connecting to the internet since day 1 and now after having my laptop for about 6 months, It decides to connect, but have "Limited Access", therefore, not allowing me ANY Access. I diagnosed the problem and it told me to shut router off, all that stuff. I shut the router off, waited 10 seconds, turned it on, all that jazz and says that I "Completed" that, but now reads, "Wireless Network Connection doesn't have a valid IP configuration".
View 6 Replies View RelatedCan't delete Norton's, when trying to uninstall I get a blank Norton's window.Thinking it could be related to Norton's.
View 3 Replies View RelatedI've been through mostly all topics and ways to make my internet work in your forums but I still can't find a solution. I installed windows 7 on my laptop and when I try to connect to the internet wireless, all I get is this message: wireless network connection doesn't have a valid ip configuration[CODE]
View 1 Replies View Related