Windows Update Completes, But Does Not Stay?
Sep 25, 2012
When I go to update something on the desktop via Windows Update, I can download and install updates. BUT, when I go to the notification bar, it says that there are updates available again, even though I already installed those same updates.
I have tried shutting down the computer to install the updates, which does download and install, but the update icon still appears on the "Shut down" button. It's weird because in the update history it will say that I performed the updates that day, but still says there are available ones.
View 5 Replies
ADVERTISEMENT
Sep 8, 2010
I had Intel DG31PR motherboard and I recently changed it to a Intel DG41RG board. I intalled Windows 7 and it worked very well with DG31PR but when I try to intall it with DG41RQ the setup completes successfully(it boots itself from hard disk during installation several times without any problem) and when Windows 7 tries to boot itself for the first time it fails. After loading BIOS I get a blank screen. It happens with both x64 & x32 but other windows such as XP and Vista works fine. I tried my copy of Windows 7 with several other computers including one having Core i3,DH55TC and windows 7 installs and works in them very well. I tried 2 genuine DG41RQ motherbords but the problems persists
View 9 Replies
View Related
Dec 13, 2012
After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER, so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode.. what to do from Safe Mode to return my boot up back to normal?
View 4 Replies
View Related
Dec 14, 2012
After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode.
View 1 Replies
View Related
May 1, 2012
I received recovery discs from acer. First I deleted the 100 mb partition as per acer and ran the recovery. It finished and the system rebooted however I received the following boot error msg: Windows boot mgr.Windows failed to start. A recent hardware or software change may be the cause.
1. Insert your windows install disc and restart.
2. choose your language settings and click "next".
3. Click "repair your computer"
File BootBCD
Status: 0xc0000225
Info: an error occurred while attempting to read the boot configuration data.
It is my understanding from acer that windows 7 is re-installed from the recovery discs. Don't understand why this msg. Dont have any windows 7 discs. The acer logo does come up after boot but goes directly to the screen with the above info.
View 1 Replies
View Related
May 1, 2012
I received recovery discs from acer. First I deleted the 100 mb partition as per acer and ran the recovery. It finished and the system rebooted however I received the following boot error msg:Windows boot mgr.Windows failed to start. A recent hardware or software change may be the cause.To fix this problem:1. Insert your windows install disc and restart.2. choose your language settings and click "next".3. Click "repair your computer"File BootBCDStatus: 0xc0000225Info: an error occurred while attempting to read the boot configuration data.It is my understanding from acer that windows 7 is re-installed from the recovery discs.Don't understand why this msg. Dont have any windows 7 discs. The acer logo does come up after boot but goes directly to the screen with the above info. Does anyone know how to fix? Please explain in laymans terms as I am not very knowledgeable in this field. Of course acer wants me to send in for paid repairs.Computer is 1 1/2 yrs. old. acer 7741z
View 1 Replies
View Related
Dec 13, 2012
After rebooting my system, it recommended that i do a start up repair. After the repair completed i recieved the black screen right before choosing USER , so i tried 3x more to repair which each completed but same outcome till the point it just says cant repair automatically . Then i tried to system restore which failed also , but the catch is my system boots fine from Safe Mode..what to do from Safe Mode to return my boot up back to normal?
View 2 Replies
View Related
Jun 8, 2012
I haven't been able to find out what's interfering with these programs; anything I cut, copy, or want to paste goes through a lengthy delay before the function completes. I did do a restore to a prior restore point. There is a program I don't remember installing; it is called B Updater Service, dated 4/5/12 384KB.
View 25 Replies
View Related
Jul 3, 2012
Where do i find some one to review my logfile after combi fix completes it process? anyone here who can do it ?
View 1 Replies
View Related
Oct 23, 2011
I used to be able to press the power button, and my windows 7 would got "and stay" in sleep until I pushed the power button again. what to do to keep it in sleep?
View 8 Replies
View Related
Nov 16, 2010
When I'm typing in microsoft office / outlook emails. my cursor will jump to another spot on the page and or sometimes jumps into a diferent window and continues there? This is worse than when I just had Vista. I upgraded thinking windows 7 was going to fix problems, and it hasn't. It's just a glorified versoin of Vista.
View 3 Replies
View Related
Aug 30, 2009
I have Win 7 RC Ultimate 64 bit for a while. Works great. The only problem so far is that it will not stay in "sleep" mode(not the hybernation). It goes there, the light on the box is blinking and after about 10 sec it wakes up. Can't figure out what wakes it up though. I dual boot on the same machine to Vista Home Prem 32 bit and it goes to sleep fine and stays there. So, I don't think it is hardware.
View 7 Replies
View Related
Nov 18, 2012
For the longest time I have had a problem with my custom build Windows 7 machine staying in Sleep Mode. I would set it and a little time forward and the machine would be started again. Today I was reading some additional suggestions. It said it may be a slide show. I don't have any slide shows set up but after some thinking I decided to turn off the Windows Personalization desktop theme that I had on my computer. I chose to have them rotate some beautiful desktop themes every 10 seconds. Once I turned off all but one of the themes, I have not had any additional problems with my computer staying in sleep mode. I like the various desktop background changing but I also like the ability to use sleep mode.
View 1 Replies
View Related
Nov 30, 2011
I changed the icon of my windows explorer and pinned it back to my toolbar, after that, it kept the original icon, and then a few hours later I looked and it was changed to the one I chose. I was super happy but after I rebooted my computer, it changed back :/I thought i remembered seeing a thread on how to change it but I couldnt find it, if there is one could someone direct me there please?and another thing
View 1 Replies
View Related
Jan 18, 2013
cursor jumps around for no known reason, in all programs attempted
View 3 Replies
View Related
Sep 10, 2011
My computer - HP Pavilion P7-1010. Windows 7 64bit home edition..My Laptop - HP mini 1000 with XP I play this game, Trickster Online.. and they have a "stay connected for 100+hrs" event..On my laptop with XP, it will stay connected until I Disconnect it.On my PC, it will stay connected for like 5-20mins, then log everything out. EVEN if i am still using the internet.. (its not Idle!)
I've tried the following:
-Turned off "Disable this to save power"
-Turned all my Windows power settings to "never hibernate, no screensaver, etc" even no shutting off of the monitor.
-Tried Wireless and wired, (Both same results)
-Reformating the computer to get rid of any rogue programs messing the net up
-Updateing drivers and Windows
View 1 Replies
View Related
Apr 22, 2011
All of a sudden I am getting an error that the print spooler is not running out of the blue. The printer had been working up to then?
View 1 Replies
View Related
Nov 1, 2011
I just got new computer hp compac Q 1-2025. unable to sign in windows 7 without the sign in box. Also screen only stays on for a few minutes before it got black and have to a key for it to come back on.
View 5 Replies
View Related
Nov 19, 2011
How do I make my screensaver stay on longer on windows 7. I can be listening to music for 5 minutes that the screen will go blank than I have to put my password in again
View 2 Replies
View Related
Jul 7, 2012
I used to go to the control panel and get to where I could set the screen to stay on a longer or shorter period of time, but now I can't find where to go to fix it.
View 1 Replies
View Related
Jan 5, 2011
I have done everything that windows has asked and still can't get it to work. I have a windows 7 printer but since I can't keep the spooler running it won't let me install it. I have tried manually and using the fix it program but all that does is restart the service and it will stop on it's own.
View 6 Replies
View Related
Feb 23, 2012
i have a samsung laptop running windows 7. i have a netgear modem and router. all of my other devices connect with no problems but my laptop wont stay connected. it will connect for a while and then it will disconnect.
View 16 Replies
View Related
Nov 18, 2012
I have the same problem with my print spooler, my computer is only 2 mo. Old, hp, can't help me, staples can't help me, i have a warranty on the printer & computer but of course that isn't covered. I don't know what to do .
View 1 Replies
View Related
Jan 19, 2012
Not sure whats going on at first I thought maybe had some malware hidden so a ran an eset scan AND a malwarebytes scan, neither found anything. Usually it would take about 20 seconds or so from the time I turn it on to the log in screen. Now sometimes I'll turn it on and it will stay at the loading windows screen sometimes a couple minutes to 5 mins then make its way to the log in screen.
View 4 Replies
View Related
Nov 22, 2012
I used the Windows 7 usb/dvd tool to install Win8, but now i want to use the stick for other stuff again. When I put the stick in it just connects and then disconnects every 15 seconds or so. Tried to right click and format, but it fails, guessing because it disconnects. Also tried using diskpart in cmd but had the same results.
View 1 Replies
View Related
Jan 30, 2011
I'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies
View Related
May 24, 2012
My new laptop running Windows 7 Professional and it is not easily recognizing other workgroup computers. When, and if, it does, it does not staying connected to other computers and a wireless printer on my workgroup.I have a desktop that is running Windows XP Home. It is sharing its printer and external hard drive to all computers in the workgroup. When I got on the router, I was able to get the Windows 7 machine to see XP box long enough to map a drive and load the printer. After rebooting, Windows 7 did not recognize the drive map or the printer. I pinged the XP box and got Destination Host unreachable. The only thing I can ping is the router. Also, when I went to load the wireless printer (with Windows 7 drivers) it did not see the printer even though the printer�s connection light is on. I have two Vista Business machines and one Windows 7 Home computers in my workgroup. These are not having any problems. From those other machines, they can ping each other but they cannot ping the new box.It is acting like a setting in Business has it isolated itself and is not allowing traffic. I have searched this problem and it seems to be common but I have not seen a post addressing the Business question. I have tried everything that the help files and forums stated (setting discovery, disabling IPv6, disabling firewall on both, uninstalling virus protection, etc.) with no result. Is there a setting in Business that would prevent it from being visible?
View 1 Replies
View Related
Nov 3, 2012
The update is called:
nvidia - Graphics adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA GeForce GT 425M.
After installing it, whenever my laptop tries to use the Nvidia card, I get a blue screen and the system restarts. I looked in installed updates to uninstall it, and it is not there. I did a system restore to four days before I installed it, and I still get the same effect. Lastly, I installed some older nvidia drivers that used to work using the clean install option, and I still have this problem.
View 1 Replies
View Related
Oct 30, 2012
A while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.
Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.
View 8 Replies
View Related
Nov 3, 2011
How to View Windows Update History Details in Windows 7 ?
View 0 Replies
View Related
Feb 15, 2012
I have a new HP which is jumping back out of sleep every time. It doen't matter how it goes to slepp, on timer, start menu, power button... 30sec - 1min later it wakes up again.
Event viewer says that the wake up source is unknown. I have run an energy report but don't know how to fix the errors it is coming up with. I have pasted the report below.
System Manufacturer Hewlett-Packard
System Product Name p7-1010a
BIOS Date 05/17/2011
[Code]......
View 5 Replies
View Related
