Cursor Wont Stay Still On Windows 7
Jan 18, 2013cursor jumps around for no known reason, in all programs attempted
View 3 Repliescursor jumps around for no known reason, in all programs attempted
View 3 RepliesWhen I'm typing in microsoft office / outlook emails. my cursor will jump to another spot on the page and or sometimes jumps into a diferent window and continues there? This is worse than when I just had Vista. I upgraded thinking windows 7 was going to fix problems, and it hasn't. It's just a glorified versoin of Vista.
View 3 Replies View RelatedI Downloaded An Custom Cursor, then i save. But when i Log off then log on again is isn't my custom cursor but Windows 7's Cursors
View 1 Replies View RelatedI'm not sure what the issue is but I can go in and change the mouse cursors and everything works until I restart the computer. Then it immediately reverts back to the default Windows 7 Aero cursor. When I go back in the cursors settings it has my settings listed but I have to hit "Ok" and then it's fine again.
View 3 Replies View RelatedI used to be able to press the power button, and my windows 7 would got "and stay" in sleep until I pushed the power button again. what to do to keep it in sleep?
View 8 Replies View RelatedI have Win 7 RC Ultimate 64 bit for a while. Works great. The only problem so far is that it will not stay in "sleep" mode(not the hybernation). It goes there, the light on the box is blinking and after about 10 sec it wakes up. Can't figure out what wakes it up though. I dual boot on the same machine to Vista Home Prem 32 bit and it goes to sleep fine and stays there. So, I don't think it is hardware.
View 7 Replies View RelatedFor the longest time I have had a problem with my custom build Windows 7 machine staying in Sleep Mode. I would set it and a little time forward and the machine would be started again. Today I was reading some additional suggestions. It said it may be a slide show. I don't have any slide shows set up but after some thinking I decided to turn off the Windows Personalization desktop theme that I had on my computer. I chose to have them rotate some beautiful desktop themes every 10 seconds. Once I turned off all but one of the themes, I have not had any additional problems with my computer staying in sleep mode. I like the various desktop background changing but I also like the ability to use sleep mode.
View 1 Replies View RelatedI changed the icon of my windows explorer and pinned it back to my toolbar, after that, it kept the original icon, and then a few hours later I looked and it was changed to the one I chose. I was super happy but after I rebooted my computer, it changed back :/I thought i remembered seeing a thread on how to change it but I couldnt find it, if there is one could someone direct me there please?and another thing
View 1 Replies View RelatedWhen I go to update something on the desktop via Windows Update, I can download and install updates. BUT, when I go to the notification bar, it says that there are updates available again, even though I already installed those same updates.
I have tried shutting down the computer to install the updates, which does download and install, but the update icon still appears on the "Shut down" button. It's weird because in the update history it will say that I performed the updates that day, but still says there are available ones.
My computer - HP Pavilion P7-1010. Windows 7 64bit home edition..My Laptop - HP mini 1000 with XP I play this game, Trickster Online.. and they have a "stay connected for 100+hrs" event..On my laptop with XP, it will stay connected until I Disconnect it.On my PC, it will stay connected for like 5-20mins, then log everything out. EVEN if i am still using the internet.. (its not Idle!)
I've tried the following:
-Turned off "Disable this to save power"
-Turned all my Windows power settings to "never hibernate, no screensaver, etc" even no shutting off of the monitor.
-Tried Wireless and wired, (Both same results)
-Reformating the computer to get rid of any rogue programs messing the net up
-Updateing drivers and Windows
All of a sudden I am getting an error that the print spooler is not running out of the blue. The printer had been working up to then?
View 1 Replies View RelatedI just got new computer hp compac Q 1-2025. unable to sign in windows 7 without the sign in box. Also screen only stays on for a few minutes before it got black and have to a key for it to come back on.
View 5 Replies View RelatedHow do I make my screensaver stay on longer on windows 7. I can be listening to music for 5 minutes that the screen will go blank than I have to put my password in again
View 2 Replies View RelatedI used to go to the control panel and get to where I could set the screen to stay on a longer or shorter period of time, but now I can't find where to go to fix it.
View 1 Replies View RelatedI have done everything that windows has asked and still can't get it to work. I have a windows 7 printer but since I can't keep the spooler running it won't let me install it. I have tried manually and using the fix it program but all that does is restart the service and it will stop on it's own.
View 6 Replies View Relatedi have a samsung laptop running windows 7. i have a netgear modem and router. all of my other devices connect with no problems but my laptop wont stay connected. it will connect for a while and then it will disconnect.
View 16 Replies View RelatedI have the same problem with my print spooler, my computer is only 2 mo. Old, hp, can't help me, staples can't help me, i have a warranty on the printer & computer but of course that isn't covered. I don't know what to do .
View 1 Replies View RelatedNot sure whats going on at first I thought maybe had some malware hidden so a ran an eset scan AND a malwarebytes scan, neither found anything. Usually it would take about 20 seconds or so from the time I turn it on to the log in screen. Now sometimes I'll turn it on and it will stay at the loading windows screen sometimes a couple minutes to 5 mins then make its way to the log in screen.
View 4 Replies View RelatedI used the Windows 7 usb/dvd tool to install Win8, but now i want to use the stick for other stuff again. When I put the stick in it just connects and then disconnects every 15 seconds or so. Tried to right click and format, but it fails, guessing because it disconnects. Also tried using diskpart in cmd but had the same results.
View 1 Replies View RelatedMy new laptop running Windows 7 Professional and it is not easily recognizing other workgroup computers. When, and if, it does, it does not staying connected to other computers and a wireless printer on my workgroup.I have a desktop that is running Windows XP Home. It is sharing its printer and external hard drive to all computers in the workgroup. When I got on the router, I was able to get the Windows 7 machine to see XP box long enough to map a drive and load the printer. After rebooting, Windows 7 did not recognize the drive map or the printer. I pinged the XP box and got Destination Host unreachable. The only thing I can ping is the router. Also, when I went to load the wireless printer (with Windows 7 drivers) it did not see the printer even though the printer�s connection light is on. I have two Vista Business machines and one Windows 7 Home computers in my workgroup. These are not having any problems. From those other machines, they can ping each other but they cannot ping the new box.It is acting like a setting in Business has it isolated itself and is not allowing traffic. I have searched this problem and it seems to be common but I have not seen a post addressing the Business question. I have tried everything that the help files and forums stated (setting discovery, disabling IPv6, disabling firewall on both, uninstalling virus protection, etc.) with no result. Is there a setting in Business that would prevent it from being visible?
View 1 Replies View RelatedI have a new HP which is jumping back out of sleep every time. It doen't matter how it goes to slepp, on timer, start menu, power button... 30sec - 1min later it wakes up again.
Event viewer says that the wake up source is unknown. I have run an energy report but don't know how to fix the errors it is coming up with. I have pasted the report below.
System Manufacturer Hewlett-Packard
System Product Name p7-1010a
BIOS Date 05/17/2011
[Code]......
I have two systems here running Windows 7. One system is older with a PS2 mouse. I think that is why my monitor will not stay off. I have gone into advanced power settings and turned off sleep, and made sure all my settings look right. I have also gone to device manager and un-checked the "allow this device wake computer" box for the mouse. The monitor still comes on when you touch the mouse. What else could be making the monitor come on? How do I make the mouse so it's less sensitive or disable it so you have to hit the keyboard to turn on the monitor?
View 1 Replies View RelatedThe taskbar always stays on no matter what is open. Its really bugging me. I can't findsetting to make it hide when a program is open. I don't want to use the autohide feature. I windows xp it just let the windows open to max and would hide under what ever program was open.
View 1 Replies View RelatedI am about at wits end when it comes to this computer. I just built it like last week, and everything runs beautifully about it; that is, except that the dang thing won't stay turned off! I tell it to shutdown, and it turns itself back on after about two or three seconds. Let me clarify: the computer itself does NOT randomly shutdown, nor am I having problems with sleep or hibernate (haven't used them yet).
Ok, so I have tried about everything on every help forum I've read from here to knittingforums.com. I have disable all wake events, including the ones in regards to network adapters. I have disabled automatic restart, and even fooled around in the BIOS, disabling all wake events. I've even flipped around between BIOS commanded and OS commanded event wakes in the BIOS. About the only thing I can do is log off of my user account, and then do a hard shutdown. Even did the thing where you specifically set what the power button does.
So... please help! I will be most gracious, and will give any more information if necessary. The only thing I have NOT done is flash the BIOS; it won't recognize the USB device I have the updated drivers on.
have a new Dell Inspiron 570 PC with Windows 7, and whenever I set it to sleep mode it will not stay asleep, i tried all settings, but still no luck.. In Task manager dell data back up is running even though I did not enable that.. Could that be waking it up?
View 3 Replies View RelatedI'm running win7 on an hp phoenix pc with 12 GB RAM, Intel I7-2600 CPU, SSD + 1 TB HDD. I've had the pc for about 6 months, but recently my icons are being shifted all to the left side of the screen. If I rearrange the icons to where I want them, they will all be shifted to the left side of the screen whenever i reboot. I was able to find on google. I also tried HP tech support and they were not able to fix this issue. Has anyone else found a solution to this problem? I've seen lots of others complaining about this matter, but all the proposed solutions seem to relate to unchecking the "align to grid" or "automatically align icons" options under the "view" menu selection on the desktop. None of these options work. Why is this happenning in the first place? The machine was not doing this in the first few months I had it. This only started about a month ago. Previously the icons stayed where i placed them
View 6 Replies View RelatedMy clock stops "staying on top" after a couple hours after every time I boot. Since my taskbar is set to disappear, I like having a clock readily visible. Is this because I'm using a third party gadget, or is there a fix for this?
View 4 Replies View Relatedtrying to make some basic changes to the screen personalization but they wont stick. I'm in administrator mode, by the way. Every time I log back in, they revert.In particular, Im trying to change the way a slideshow is displayed. I go to Desktop Background and change Position to Fit. I Save Changes and all seems to be well. I also save the desktop theme under My Themes. But when I log back in it goes back to Stretch. Am I missing some kind of permissions thing? Or do I just not understand how desktop themes get saved?
View 6 Replies View RelatedI have the setting "Hide Taskbar" selected, yet I find it often refuses to stay hidden. It seems like sometimes it will do this when an application/window wants to "tell me something", like that there's a new email (sometimes even when the "envelope" that indicates new mail isn't in sight), but sometimes it just seems to stay up for no reason, and I have to close all the windows one by one to get rid of it. Is there any way to get the Taskbar to Stay Hidden unless I'm mousing over it?
View 2 Replies View RelatedI have never ending problems with Win 7 Problem: I like to spread out my desktop icons - NOT align to grid! Procedure: right click desktop/view/uncheck align to grid/blablabla well I do it and then it rechecks after refresh immediately by itself and moves icons back to grid which i dont want. I ve tried different things nothing works so far.Also I: right click desktop/personalize/ease of use/change admin settings/CHECK: apply all setting to logon desktop - hit ok etc - The check mark DOES NOT STAY PUT.
View 8 Replies View RelatedSince windows 7 is coming out tomorrow, i might pick up a copy of it. I've been thinking if i should upgrade my Windows Vista Home Premium to Windows 7 home premium. Should i do the upgrade?
Also, if i do the upgrade should i do the upgrade option or the custom install option? i do want a clean system but i'm scared that my laptop would be mess up after doing that. What files get kept and/ or deleted when i do the custom install, anything i should watch out for. And what is the upgrade option, does all my files and programs get kept and just replaces the OS?