Windows Fails Load Windows, Can't Access HDD From Linux
May 3, 2012
When I try and boot into safe mode (with and without networking) when it gets to loading CLASSPNP.SYS it says "Please Wait..." but sits and does nothing, it will eventually load the repair program and do a scan looking to see what the problem with the computer is. It doesnt ever find anything. I try and boot to windows normally and it just sits and the Starting WIndows screen for ever. The Windows Logo is pulsing so i know it hasnt froze up. When I try and Launch Startup repair it doesnt ever find anything wrong. So at this point Ive given up on this install of windows and want to get my files off. So I throw in a copy of Knoppix and boot the live DVD. It boots without fail. Only when I try and access my HDD that has windows installed (I have two HDDs in my computer, one for windows and programs, the other mainly for media storage) it wont let me access it. Ive tried follow tuts online to allow me to access the drive but nothing work. Is there anything I can do at this point to allow me to get my data off the drive, or repair it to boot? If I have to reinstall I can, but would rather not have to till I get my data off the drive.
View 2 Replies
ADVERTISEMENT
Jun 25, 2012
My Dell Studio 17 shut down yesterday after sitting idle. Now i cannot boot windows. I get this endless loop that ultimately leads me to startup repair which either hangs or errors out. Attempting to start in safe mode takes me to same place.I know the root of the problem is bsod as I see it flash when attempting to load windows.I was able to launch system restore tool from advanced options (f8) but after selecting restore point the cpu seems to hang after over an hour of Initalizing.I can bring up command prompt by the way.
View 3 Replies
View Related
Feb 1, 2012
Windows 7 X 64 fails when trying to load MS updates. I have Malwarebytes and MS essentials installed. Security updates for MS.NET are successful as are Definitions for MSE, the Bing Bar updates and even updates for Office 2010 (even though it is not loaded on my computer) but none of the Security Updates for Windows 7 x64 based systems will load. Every bootup for weeks it says - you have 37-40 updates. If I tell it not to update, sometimes, somehow, it does it any way and in the middle of my word processing a box pops up that is counting down to a reboot. If I don't walk away it just shuts down in the middle of my typing. If I ignore the "updates available" it changes my log off box from "shut down" to load updates and shut down.
If I don't pay close attention and change the default back to "shut down" each time I get stuck loading all the same updates that didn't load the day before. Of course if I tell it to load updates it will finish and then wants to shut down. During shut down it spends a very long time loading definitions? Then when I reboot it spends even longer trying to load updates. I must walk away. This ties my computer up for a very long time and then always has to run "start up repair" to get the PC to boot after loading updates. Every once in a while start up repair fails and the only way to use my computer is to "reset to an earlier date before the latest updates". Of course then it insists I need the updates once more! Including the ones that DID load once successfully.
I don't understand about firewalls and if I have one it is probably the default that came with MSE. (Windows also has one?) Malware bytes is not set to automatically update and run and I manually run it every few weeks but the machine always comes up clean. I downloaded and ran KB947821 System Readiness Tool but it did not improve the situation. I disabled MSE and was able to load all the security updates successfully in batches but every time I tried to load an update for win 7 x64 most of them failed, i.e KB2506014, 2533552, 2641690, 980408, 2506014, etc. Something must be blocking some of my MS updates and letting others through. I heard there was a service pack for win 7 but I hesitate to try and download it as it will probably just freeze my computer.
View 2 Replies
View Related
Sep 24, 2012
I have an ASUS laptop which used to have a recovery partition. I used a function to make recovery DVDs and proceeded to format the partition.Well now Windows won't boot. I attempted to use my recovery DVDs but after taking 10-15 minutes to boot it loads to a screen with a graphic (wallpaper) and stays there.It doesn't tell me to load the next disk, it doesn't give me any kind of menu, does not accept any kind of input (including ctrl-alt-del).
View 1 Replies
View Related
Dec 4, 2012
Old office computer:
Dell E510
P4 3.4 GHz
4 GB RAM
Radeon x800 PCIE
Crucial M4 SSD 120 GB
Windows 7 x64
New internals:
CPU: AMD A4 5300
Mainboard: MSI FM2-A75MA-E35 FM2
8 GB RAM
Corsair 450 watt PSU
Cheap Cooler Master Case
After assembling the new computer, I ran it without the system disk installed to make sure everything was kosher, and memory timings, etc. were correct. After verifying that, I shut it down and put the SSD into the new unit and booted it up. The system posts fine, but once the Win 7 startup image shows, the system restarts and brings me to the "start windows in safe mode/start windows normally" prompt.
View 4 Replies
View Related
Jul 26, 2012
Okay, so I load up the screen, and it says "Windows Error Recovery"Windows failed to start. A recent hardware or software change might be the cause.And it has options for...Launch Startup RepairStart WindowsI tried the Launch Startup Repair, but it gets stuck at the screen, and nothing pops up. Theres just a mouse.And if I hit Start Windows, it all goes well, but then after it starts windows, before I get to the login screen, it quickly flashes to a blue screen with text on it for a few milliseconds, and then just goes ALL the way back to the Windows Error Recovery
View 1 Replies
View Related
Oct 3, 2010
How do i uninstall any linux distro after successfully installing both windows and linux.i dont want to lose my MBR. [or] will it (Windows) rewrite it again.i am a bit scared to do it myself as i was going to do a secure deletion of the partition.
View 5 Replies
View Related
Jul 6, 2011
When I try to find Backup and Restore in my computer I fail to find it. I tried to load it using Command Prompt "%SystemRoot%System32control1.exe /name Microsoft.Backupandrestore" and the page shows blank with the note "The page failed to Load" I have Acronis installed on my computer.
View 12 Replies
View Related
May 7, 2012
If you have 3D acceleration enabled in VirtualBox 4.14, you can't access the chrome web store to add extensions for chromium or chrome for either Ubuntu 12.04 or Linux Mint 12 guests in VirtualBox 4.14.If you want to add extensions to either chromium or chrome, before you start your VM, temporarily disable 3D acceleration in Settings>Display for your VM, and then add your extensions.When done, you might want to re-enable 3D acceleration for your VM because some desktops don't behave well without 3D acceleration (Unity for Ubuntu and Cinnamon for Linux Mint, for example).
View 3 Replies
View Related
May 25, 2012
I'm running Windows 7 x64, JDK 7 U4 and the Java plugin just won't work correctly in any browser, be it IE9, Chrome 19, or Firefox 12. Both the Java installation and the browsers are 32-bit versions. The browsers simply hang or display nothing when a Java applet is supposed to load.I do Java development, so I need the JDK.I have tried everything it seems. Completely removed the JDK and reinstalled it, tried both JDK 7 U3 as well as whatever the latest version of JDK 6 is, tried with just the JRE, but the problem is still the same. I also used a tool called JavaRa to completely remove any remnants of Java before re-installing it.The Java plugin seems to be correctly listed in all browsers (for instance in "about : plugins" in Chrome), with the correct version, too. In Control Panel -> Java, I also have "Enable the next-generation Java Plug-in" enabled.Apart from the browser issue, Java seems to be correctly installed, as I can run "java" or "javac" from a command prompt and it will give the expected output. I am also able to compile Java source files as well as run Java bytecode without issues.A few times I have been able to get it to work in a browser. All of these times were directly after a fresh installation of the JDK/JRE, but then it seems to stop working after a short period of time.
View 13 Replies
View Related
Dec 4, 2009
Periodically I have problems loading the Gmail inbox from an IE8 favorite, if using Gmail "standard view". Gmail "basic HTML" view doesn't have the problem. Likewise Firefox 3.5.5 nor Chrome 3.0.195.33 have the problem in either Gmail standard of basic view. IE8 version: 8.0.7600.16385. Happens with both 32-bit and 64-bit IE8.
Problem only happens if loading from an IE8 favorite, not if manually going to Gmail and logging in.
Typically the problem manifests as an indefinite wait while loading Gmail. However sometimes one of the following two errors happen:
""We're sorry. It seems there is a problem. Please try using Gmail with a supported browser. If you're encountering this error while using a supported browser, we suggest alerting your Internet Service Provider (ISP) that a proxy is failing to accept cookies on HTTP redirects."
OR error loading page (yellow icon on IE8 status bar), where error details are: Read more at the forums...
View 1 Replies
View Related
Mar 26, 2011
Fujitsu Siemens laptop, Intel dual core, 1.75g ram. When I restart it, fails to load and doesn't even show to startup screen, nothing, just a black screen. so, I must shut it down from the power button. And if I start it rapidly, it's possible to not start from the first try. I made a fresh install of the OS, nothing. Can this be a hardware problem?
View 4 Replies
View Related
Sep 21, 2009
An error message has been bugging my lately, rather since I started using programs which use the remote access connection manager. One of them is songbird (the fire-foxy media player) which cannot listen to shared music, and SecondLife which uses it to make http calls, both of which make up pretty major parts of my day to day.
The actual error reads: "Network Connections
Cannot load the remote access connection manager service.
Error 711: the operation could not finish because it could not start the remote access connection manager service in time. Please try the operation again."
I found this weblink on microsoft support which explains that windows is stupid and I should load the following dependent services manually.
Telephony
Remote Access Connection Manager
Remote Access Auto Connection Manager
Telephony on my computer is already running, the Remote Access Auto Connection Manager depends on Remote Access Connection Manager, when I try to start the Remote Access Connection Manager service I get the error message: "Services Windows could not start the remote access connection manager service on local computer.
Error 1068: The dependancy Service or group failed to start."
The Remote Access Connection Manager depends on Telephony (already running) and Secure Socket Tunneling Protocol Service. When I try to manually start the Secure Socket Tunneling Protocol Service I get the following informative message: "Services
The Secure Socket Tunneling Protocol Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs."
View 9 Replies
View Related
Nov 24, 2009
when i try to connect on the network i found this message in front of me
''error 711 (cant load Remote Access Service Connection Manager)''
View 2 Replies
View Related
May 15, 2009
I have used Windows 7 build 7057. But in that I was having problem that it keeps giving error 711 (cant load Remote Access Service Connection Manager) whose soln provided on net doesnt work as 'secure socket tunneling protocol' service starts and stops automatically and other services are dependent on it. So the only soln is to reinstall windows. So I switched to XP again and this problem doesnot occur in it.
Now I wasnt to ask that was that some build related problem or other coz i want to install Windows 7 RC now. If anyone have soln to that problem than plz provide it.
View 1 Replies
View Related
Jun 25, 2012
I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies
View Related
Jun 27, 2011
i was trying to install linux on a usb drive so i could easly have a portible computer in my pocket but when i ran the linux for the first time meaning the portible usb worked it reformatted my windows 7 ultimate and ALL the data i had on it i do need this data but i can deal without it all i need is to format my computer back to windows 7 ultimate.
View 10 Replies
View Related
Oct 25, 2011
I want to install Ubuntu Linux(latest version)concurrently with Windows 7 Ultimate(x86), so that I can Use both OS on my PC and just boot from whichever one I want. Is that possible, if so, advisable?
My specs: 2048MB RAM; Intel Core 2 Quad 2.66GHz
View 11 Replies
View Related
Jan 20, 2012
I have a Gateway netbook pre-installed with Windows 7 Starter. In just 7 months it has got viruses and is full of error messages, not able to uninstall the programs causing this mess, and my web browser keeps redirecting me to alternate websites which I never typed on the address bar. I am sick and think about completely deleting the whole C disk from the Windows 7 (backup my files first) and try to replace Windows 7 with some type of free Linux OS. My netbook has no CD drive nor floppy disk drive, only USB drives. My questions are:
1. Can I really get rid of all the Windows 7 files already pre-installed?
2. Can I install and run Linux OS efficiently in my netbook?
3. How can I install Linux OS on my netbook from a USB flash drive?
View 14 Replies
View Related
Mar 1, 2011
Does Windows 7 have anything like the Linux chroot?I have an application where some of the parameters lock up the system requiring a cold boot.I appear to be one of the very rare users with this problem.I'd like to run through more parameters to give the developers more specific information about what might be causing the problems. As you can understand, hitting a param and crashing can get tedious really quickly.I'm hoping there is a process that let's me isolate the app so when it crashes I can close it gracefully rather then cold booting.
View 3 Replies
View Related
Oct 25, 2011
Would like to know, I want to install Ubuntu Linux(latest version)concurrently with Windows 7 Ultimate(x86), so that I can Use both OS on my PC and just boot from whichever one I want. Is that possible, if so, advisable?
My specs: 2048MB RAM; Intel Core 2 Quad 2.66GHz
View 6 Replies
View Related
Feb 13, 2012
I had set-up windows 7 first and then i set-up linux in my computer. Now i no longer want linux in my hardware, how can i do to get partition D which i set-up linux for windows 7?
View 1 Replies
View Related
Apr 5, 2012
I recently installed ubuntu as a duel boot between my win 7 installation, and I then reset the MBR, as I prefer the windows mbr.
Now, I cant boot into linux, so my question is: Is it possible to add ubuntu to the windows mbr manually, and if so, how?
View 3 Replies
View Related
Jul 4, 2011
I have a problem on my windows. I never installed linux on the same laptop. so that there is a dual boot to linux and to windows.i found that linux can read windows partition ..whereas when I enter (boot) on my windows can not access the linux partition as drive.
View 1 Replies
View Related
Jan 17, 2012
i have a copy of windows 7 ulitmate and cant get it to boot up, its all activated on the disk
View 9 Replies
View Related
Jan 6, 2012
i have a small web server running Fedora 15 and Apache, and I have a "pictures" folder on a windows machine that I have mounted from my /etc/fstab file, with "rw" access, however when I try to use a freeware PHP script in this particular folder, it doesn't display properly (won't show subfolders).I created a new folder directly on the linux machine, and the script works fine there.
Here's the setup:D:SharedPics - windows ntfs folder, shared as \winserverpics, and this share is mounted as /var/www/html/pics with RW access (although the username/pw I supply in .smbcreds file has "full" access.) PHP script does not work here.All linux permissions show rwxr-xr-x for files and folders, and owner is "root:root"I copied all of the files/subfolders from the "pics" folder into another folder, directly located at /var/www/html/pics1. file/folder permissions are exactly the same as the pics folder. PHP script works fine here.File and share permissions on the windows machine are set for read/write/modify for "Everyone", but it seems that the samba "service" is receiving different permissions. I've checked the smb.conf file and not been able to find anything that would cause "read only" permissions.
View 1 Replies
View Related
Mar 30, 2012
I posted here a little less than a week ago asking how to reclaim the free space from the linux partition I deleted. Today I restarted my computer for the first time and it won't recognize win7 on my computer. Was I supposed to do something after I deleted linux? I tried using my win7 cd to see if I could boot like that, but it just wants to reinstall windows, which I would rather not do.
View 2 Replies
View Related
Sep 27, 2011
I have a Sony Vaio VPCEB 15-FA. Everything works fine on Linux but, I need to run Windows 7 for some new required work. When I load the 7 the system does not recognize the cd drive. It works fine under Linux. I have reformatted, loaded Windows 7 only etc but, it still does not work.
I assumt that the Linux made firmware changes to my cd drive that need to be reset.
View 6 Replies
View Related
Oct 31, 2010
install linux ubuntu on top of my windows 7 , i have a hp pavilion notebook dv-6 2155dx 4gb ram 500gb hdd it comes with windows 7 pre-instal , is there anyway how to get back to my wondows 7 i don't have the cds for this notebook?
View 6 Replies
View Related
Feb 19, 2011
i bought a laptop with linux installed in it but i already had a windows 7 from my old pc so how do I install do a clean install on this lap top?When i try it says it can't be installed
View 9 Replies
View Related
Dec 22, 2011
My friend had another friend get rid of windows 7 and put linux on her computer and she wants windows back.I am just wondering if their is an easy way for someone who is not 100% tech savy to re-install windows. ive read the other forums and there is a bunch of stuff about partitions and GRUB that im not sure of.
View 5 Replies
View Related
