Windows 7 X64 - Slow Keyboard Input?
Apr 10, 2011all of a sudden my key board my keyboard has gone nuts.each letter lags my actual keystroke by atleast 5secs,n even the spacebar.i cannot even type any thing in caps.
View 2 Repliesall of a sudden my key board my keyboard has gone nuts.each letter lags my actual keystroke by atleast 5secs,n even the spacebar.i cannot even type any thing in caps.
View 2 RepliesI'm getting a strange problem when starting up my computer. On initial boot, one of the messages on screen is "press del to enter setup". At this point, the keyboard works fine-I can go in and change BIOS settings without any problem. However, if I let it contimue booting up, another message appears-"Press any key to boot from CD". This is the one I want, but at this point the keyboard has no effect. Even pressing F8 does nothing.
View 5 Replies View RelatedI enabled PC Tablet Support in the windows features section of windows 7, but i still can't get windows to pop up that on screen keyboard icon that usually displays next to any type of data input fields.My windows is NOT installed on a tablet pc, but i recently connected a touch screen to my desktop and am hoping to get the same sort of functionality like my tablet edition of xp had.
View 1 Replies View RelatedCan you assist me to resolve the issue of an extremely slow keyboard response? I am using Windows 7 on a laptop.
View 1 Replies View Relatedi have a new Acer aspire 7735Z-4033. Everything seemed to be working ok. I d/l windows 7 home premium and now my keyboard is not working properly. If i'm not watching i'm missing letters and then having to pound on letters to get them to type, problem backspacing and highlighting also..
View 3 Replies View RelatedMy new PC with windows 7 won't detect my old Acer v243w monitor. I was hoping to use dual monitors, with this monitor connected via vga into the motherboard and my other monitor connected by DVI into the graphics card. The graphics card I am using is a Radeon HD6870. It has DVI slots and an HDMI slot but no VGA slot.
Even when the Acer is plugged into the motherboard by itself using VGA it does not get detected then either.
Is it simply a case of getting a lead which will convert my VGA lead from the Acer monitor into a DVI output which I can then plug into the graphics card?
Or perhaps there is a way of enabling VGA support, maybe via the graphics card or something? It seems odd to have a VGA socket in the motherboard if it is not going to work.
Windows will happily output sound to my headset but there is no input from the mic. I have a xonar dg as my soundcard. The headset mic has been tested on a laptop and works The microphone mute button the the headset cable is set correctly The jack is correctly in On plugging in (and fiddling with the jack) the mic I can see noise in CP/Sound window It has been tested on the front panel, the soundcard jack & motherboard jacks Drivers have been wiped and reinstalled System restores had no effect A reinstallation of windows keeping programs & settings had no effect The mic is not muted or set too low in Control Panel / Sound The mic in my webcam works correctly (USB) Connections inside the case are not loose Toggling the front mic option in Cp/Sound/Recording/(the mic)/properties/custom has no effect I also managed to get the mic to work (badly) for a few seconds after windows reinstalled. After I plugged in the headphone jack, the mic went dead and hasn't recovered since. The mic has worked on this PC before, it seems some setting / software / driver is mucking up.
View 2 Replies View RelatedI tried to attach a M-audio 88es USB MIDI keyboard to my Dell Studio 1747 laptop (Windows 7 Home Premium x64). The keyboard is correctly identified on the USB, M-audio's drivers installed and this shows up in any MIDI software I start, but nothing can be transmitted from the keyboard to the computer.The usb keyboard works with other computers, and the Dell Studio sound system can play MIDI files. To make sure I alternated to an external Creative XFi soundblaster audio unit, which should have all MIDI capabilities, but again no sound from the keyboard (actually, a field in the recording software would show up if MIDI instructions were received).
View 5 Replies View RelatedI have Windows 7 Ultimate x64.When I plug ANY Xbox 360 controller into my computer, it says "Unknown Device.I went to the Microsoft website to directly download the Xinput drivers, and when I went to download the, Windows Genuine tool, it 404'd on me, as the download page was gone, and it's still like that for me. I then found a direct download from Microsoft for the Xinput driver and it says "Not enough storage is available to process this command." Just to let you know my temp folder is clear, I have 16gigs of ram, and 573 GB free on my HDD, so it's a program error. I look far and wide on the internet for drivers, and I even download a Xbox 360 controller emulator (which is actually cool, it allows you to inject xinput drivers into any game) but it still didn't provide the base drivers I need I'm probably going to reformat again because it sadly seems like it's the only fix,
View 1 Replies View RelatedI just bought a Lenovo v570 laptop with vga and hdmi output and I cannot get the hdmi to output to my tv. The tv is a vizio 47" 3d LCD and the laptop is running windows 7 home 64bit. I have tried windows graphics drivers, lenovo drivers and intel drivers. To me there is not much difference between them but who knows. The laptop will output to tv using vga and it will connect to an LG 42 inch LCD at my work using hdmi, just not to the one I have at home. I have tried everything that I can think of as far as settings go and on my tv as well. Nothing changes whatever I do. Does anyone know of any hardware compatibility between some vizio tvs and windows 7? I have seen one on the compatibility website for windows but it was not my tv. Mine is not listed. The model number for my tv is E3D470VX. Not sure what else to try. Next I guess I will call Vizio to see if they can work out the problem. Lenovo support doesn't know.
View 9 Replies View Relatedi have video input on mce but i cant finish set up because i d ont have ir receiver hardware. i d ont want. no other programs walk on win 7 64.
View 1 Replies View RelatedI have an Issue when I go into the device manager of my Windows 7 64 bit desktop pc it says: "The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. This is for the pci input device."
I tried updating the drivers and it says windows could not find the drivers for this device if you know the manufacturer go to there website. I tried searching for the drivers manually through the list that windows gives you but said it couldn't find them either. I have a Creative audigy 2 sound card and when I go to update the driver from the audigy 2 it says that it can't find drivers even though they are installed and the sound card is working.
Nothing indicates that they are installed except for the fact that it does show a driver date and version. I have the latest drivers. From 3 something 2012 I tried updating the drivers from creatives website but it said no hardware device could be detected on my system. Should I maybe reinstall the card? Just put it back into the same slot on my motherboard?
I was using my laptop (HP Pavilion dv6) just fine recently, and through half of yesterday. I did what I normally do when I leave a friends house...I shut it down correctly using the shut down option at the start menu, then pack it into my laptop bag (has a padded sleeve it fits into) and came home. Later that evening I tried to boot it up like normal. For some reason the wireless card takes forever to load and connect, so I typically turn it on and leave it there while I do something else. When I came back the PC said it was locked, which it never usually locks, especially after only 10 minutes. I unlocked the PC and it had my options for monitors (monitor only, expanded, monitor and tv, etc). I selected the PC monitor only and tried to load things like normal. Loaded a few programs and went to send an IM and the keyboard seemed to be stuck on the g or 8 key and wouldn't allow me to stop the input unless I clicked on the desktop. I could not click back in and delete it. Attempts to do so made the screen lock and give me the monitor options again.
At this point I figured it had to be virus/malware related so I tried to reboot into safe mode with networking. I got the options to come up but it was like the up arrow was stuck and wouldn't allow me to manually control and select an option. Had to hard reboot with the power key to try again. This time it would not move at all. I have two pc's and both have tTamviewer so I opened it on both and was able to remote in and do some scans. Spybot found a few things as well as Malwarebytes and I selected remove selected. Rebooted and still having the same issue. Tried scanning using my Avast Internet Security 7 scan and let it run overnight with Malwarebytes again. Malwarebytes brought back a PUP.funmoods (which I have uninstalled in add/remove programs and, while annoying it's showing up, don't believe to be the case because that was uninstalled months ago) and I had a huge list of files in Avast that said they could not be scanned. I have tried using system restore. I do notice when Windows boots up, it shows an empty command prompt box that eventually disappears and then a second one comes up later that says:
"AMD accelerated video transcoding device initialized Copyright (c) 2012 Advanced Micro Devices, Inc. All rights Reserved."
I did recently update my graphics card (ATI Mobility Radeon HD5650) to the latest driver. I have tried rolling back the driver and still no option. I entered the command in the command prompt to run check disk at next boot but it does not run or give an error. It just seems to skip it and go straight to Windows. A friend thought it was simply the input items on my PC giving it issues because the problem wasn't happening through Teamviewer on my Dell PC, however, that started exhibiting similar problems but not on the same scale.
Specs:
Intel Core i7 CPU
q720 @1.60 GHz
8GB RAM
Windows 7 Home Premium 64 Bit
I'm running Windows 7 Home N SP1 x64. I'm using an M-Audio Fast-Track Pro device to record audio into a music sequencer (Cubase 5), through a Shure SM58 Microphone. The M-Audio box is connected to the computer via USB. I've been using this set-up for about a year now and it hadn't caused me any problems until the last few weeks. For some reason Windows is not registering any signal from the input of the M-Audio box. The box itself picks up the sound and I can hear tapping on the microphone when M-Audio is selected as the output device, but not from the built-in speakers.
I first noticed the problem in the software (and thought for the longest time that it was the software). I'm very competent with Cubase and tried everything I could think of to get it to register with no avail. It was only when I tried to use the device on another sequencer that I realised that it's not the software. Then, since the mic works fine, the box itself is picking up the signal and out-putting it through itself, it must be something wrong with the computer or the OS.
I've re-installed the M-Audio driver, didn't make any difference. I've set the M-Audio as default in both playback and recording tabs in the sound control panel. Playback works fine. One thing that's really strange is that when I open manage sound drivers in the control panel and tap on the mic, neither the levels in recording nor playback even flutter, even though I can hear it pretty clearly through the headphones.
Win 7 Slow thru-out, especially loading of IE9 and Firefox. [code]
View 4 Replies View RelatedWe're running an Oracle application that requires the jinitiator 1.3.1.22 on the client pc. Prior to Windows7 we only had a problem that required replacing the jvm.dll file within the Jinitiator installation folder. With Windows7 64bit and/or 32bit, we're seeing where some clients can open IE9 and get the popup logon screen as expected but nothing you type will show in the logon area until you click outside of the window and then come back to it. We've noticed that unless the cursor is blinking in the logon window it will not display anything that is typed (unless you click outside the window and come back to it). However, some users can use the 32bit IE and never have a problem. Sometimes you'll get a message that Windows is changing the basic theme.
View 1 Replies View RelatedI am looking at getting a new laptop.I have my hart set on one model, with several, variations.Here is the first one Amazon.com: ASUS G73JW-XA1 Republic of Gamers 17.3-Inch Gaming Laptop,Black): Computer & Accessories No definitive answer on to which kind of optical drive this has... Some reviews say it has a BR others says DVD. Slightly cheaper Biggest HDD ASUS G73JW-XT1 Laptop Computer - Intel Core i7-740QM 1.73GHz, 8GB DDR3, 500GB HDD, Blu-ray Player/DVDRW, 17.3 Full HD, Windows 7 Home Premium 64-bit, Black, 2-Year Warranty, 1-Year Accidental at TigerDirect.com Cheapest smaller hdd Amazon.com: ASUS G73JH-X5 Republic of Gamers 17.3-Inch Gaming Laptop - Black: Computer & Accessories Blueray for sure. most expensive decent hdd space 1.6 ghz processor over 1.73 ATI 5870 1GB not the NVIDIA GeForce GTX 460M 1.5GB not an issue since im more of an ATI person
View 9 Replies View RelatedYesterday my computer crashed, but I got it working quite quickly again. But when I was to write to my friends in a chat (I am swedish) I realized i could not write any swedish letters. And all the 1-9 shift functions were moved or gone too. It has taken me a while to figure out where the functions are now (like ? ! @ etc). So anyway I thought that the input language must be acting wierd. and when I were to look what language i had on, there were none. No input languages. None. I cant add, because there are no languages to add. They all are gone.
View 5 Replies View RelatedI have an hp a6403w Intel m board .I keep getting no input screen on monitor.So far i have put in a new video card.. New power cord no help.tonight i bought new 750 watt power supply no help.I have pulled out memory chips powered cpu on get beeps put back in no help.I have tried onboard video no help. I have tried to pull out power cord holding power button on for 60 sec plug back in. you guessed no go. all lights come on cpuprocessor fan are working ovideo card fan runs.
View 3 Replies View RelatedIm having a tricky question I thought I had answered. I have a 32-bit Win7 machine that I just unpackaged and setup for a user. I was having problems with windows not responding to mouse or keyboard commands after what I thought was a sleep issue. I disabled hibernation, sleep, hybrid sleep, HDD power downs. Now the computer just turns off the monitor, User always turns off his PC and actively uses it all day. I thought this had fixed the problem, I just left it running in my office and would just make sure it responded. I just installed the new machine last night thinking I had fixed the problem. As the user was typing an email he "Claims" that the screen just went dark and he couldn't get it to come back on. The light on the monitor showed activity (Wasn't the orange sleep light) but wu9ld not return from this state. I have to manually power down when it does this.
View 1 Replies View Relatedi have a windows 7 computer that i got second hand from a computer repair place. it's a new install, but not genuine apparently. all this computer is used for is surfing the net on a large monitor/watching netflix/hulu/Internet.so, had a few bsod problems with netflix and similar, but nothing big, until monday. on monday, it suddenly wouldn't take any input from the mouse after the first few clicks. sunday night it worked fine, the most recent change was an installation of dvd decrypter on friday. however, monday it will load up, allow me to click past the "not genuine" screen, and maybe click one or two more things, then any time i click above the taskbar, there is no response. the weirdness is that i can do anything from the taskbar. open/close new programs, access the windows menu, etc. but if i click an open window, it deselects it, like i had clicked an empty portion of desktop. this also occurs if i click an icon on the desktop. the keyboard works fine, and it's part of a wireless set.
i tried cold-booting it, and a new mouse, neither worked.finally, i did a system restore to about 3 days ago. this seemed to restore complete functionality. however, i just found out from my wife that its' exhibiting similar symptoms-- she will go to netflix and everything will work fine, until she got to the page where something was playing, at which point it wouldn't accept commands again.
We just bought a Hp Pavilion p6-2133w, we hooked it up to a sony monitor, we had to hook them up with a adapter that takes the dvi-d from the computer and adapts it to vga for the monitor. The problem is the monitor doesn't act like it is reading the signal.
View 5 Replies View Relatedcookies are blocked without any input from me? how can i fix this?
View 1 Replies View RelatedFor some odd reason there is a noticeable delay once my laptop wakes from sleep. It will display the "press ctrl-alt-del" welcome screen almost instantly, but it takes 10-20 seconds for it to recognize when I actually press ctrl-alt-del. I don't remember it doing this when I first installed the RC, and I don't have any credential management software running. This is on an HP 6710b.
View 0 Replies View RelatedI have the same PC config as a Core i5 2400 3.1Ghz,Intel DH67BL,4GB RAM DDR3 1333Mhz(2x2GB Corsair,Kingston),1TB Seagate 7200.14 HDD with no add-on cards.For some days I am not going to "play" graphics intensive games like Call Of Duty series,Crysis,Assassin's Creed series etc.So I took graphics card(XFX GT 240 1GB GDDR5) from PC and kept in it's box with electrostatic bag and silica gel and I hope it will remain in good condition for a long time.By the time,I use Intel HD Graphics 2000 Series and I think it will be sufficient for my current activities which include just watching HD movies and playing "chess titans" and "minesweeper".Why I did this becuase I just need to save power
View 6 Replies View RelatedI have an Asus P6T motherboard with Realtek ALC1200 on board audio and Windows 7 64 bit OS, DirectX 10, Audio Driver version 6.0.1.5859. The sound works normally for all audio functions. I installed Nero and went to use the Wave Editor application to record a song from the web and got the message "Unable to open recording device". Going to Options > Device Settings > for an Input Device there only shows "MMEwave mapper)". There is no other input device listed. In Device Manager the "Realtek High Definition Audio" device shows as the only device. Going to "Manage Audio Devices" and the "Recording Tab" there shows only "Microphone" and "Line In". There is no "Realtek Digital Input" device listed (as I've seen in web screenshots from others). how to get an input device listed to use with Nero recording?
View 9 Replies View RelatedMic: Razer Carcharias
OS: Windows 7
Sound card: Creative Labs Sound Blaster Audigy SE
Just as the title says, my mic is only getting my computers output instead of its own input. It happened randomly, I walked away for a quick second and then it was like this.
how to give the input to tts256
View 1 Replies View RelatedSo I downloaded SWTOR and when it opened up my monitor said "input rate not supported" My monitor is a dell st220l.I tried booting into safe mode and changing the refresh rate but there is no where to change it. What the heck do I do?
View 3 Replies View RelatedA Compaq Presario CQ62 Laptop running windows 7. I accidentally spilled wine on it and the keyboard no longer worked.I purchased a Microsoft wired desktop 600, but it has no function keys. On the original keyboard I used Fn E12 to connect to a network, but with the new keyboard I can no longer connect to a network. There must be a workaround?
View 2 Replies View RelatedStarting today my computer has been randomly turning itself off, although running lights are still on, and the computer sounds as if it is still running normally.Essentially what happens is that it crashes out, the monitor says input signal lost and then nothing happens. First two times it crashed whilst using Photoshop. Third time I installed a program to monitor the HDD temp. It was running just over 40c when it crashed again (had a low end game running to see if the HDD temp would rise). I waited 30 min before turning the computer on each time.Opened the case to check for any build up of dust, it seemed fine.I have also checked that all the cables are plugged in correctly.Also definitely something wrong, because holding down the power button didn't turn it off. Had to turn the computer off by the switch at the back of the computer.Only thing new with the comp today was updating Microsoft.Net framework, a few hours before the first time it crashed.
View 4 Replies View Related