For some odd reason there is a noticeable delay once my laptop wakes from sleep. It will display the "press ctrl-alt-del" welcome screen almost instantly, but it takes 10-20 seconds for it to recognize when I actually press ctrl-alt-del. I don't remember it doing this when I first installed the RC, and I don't have any credential management software running. This is on an HP 6710b.
View 0 RepliesI have a Line 6 Guitar Port that is run as a digital input over USB. I have tried changing the buffer and still receive a slight lag that makes it impossible to play as the lag throws off any rhythm. Any ideas on removing the lag from the input device?
View 0 Replies View RelatedEverything shows up fine until the welcome screen after that it normally used to fade to the desktop but now it goes blank. The screen in Black with only the mouse pointer. Its not hung, i can move the mouse pointer. Then after a minute or so it advances to the desktop. Everything on the desktop loads up in less than 5s. The PC runs fine, it is really fast as there are only a few programs, but only boots slow. My total boot time is about 3-5 min. I think it should be like in a minute or so.I have not tweaked much with the system but have installed a few programs like MS office, Nero, Acrobat and Photoshop. These are the only heavy programs in the PC right now. The only games on the PC are AC1 and AC2. I have uninstalled my graphic driver and reinstalled. I already minimized the programs in the msconfig>startup to the minimum. I have run ccleaner, spybot s&d, Antimalware and i also have a trial copy of Kaspersky AV (upgrading later to 1-year license). there are no peripherals attached during boot except the USB keyboard and mouse. A printer is attached too but is most of the time turned off.
View 11 Replies View RelatedAfter leaving my comp on overnight i wake up to non-responding programs, i shut down manually and then as i restart this happens. 5minute lag on welcome screen and then it turns blue with a moveable cursor. i have used system restore and created a new user but neither works. i can run perfectly on safe mode.
View 6 Replies View RelatedHas anyone figured out why the welcome screen spins for about 10 seconds ... then brings up the desktop. It is clear that startups are occurring as |I can here skype logging in. This is new in the RTM as RC did not have this long delay. All my device drivers are functional and working. The machine is running an SSD drive OCZ ... it is dual core 64 @2.1ghz --- a ripping machine. Yet the Welcome takes a long time.
Thoughts?
Windows 7 is booting normally and after I type my password in the login window the text 'welcome' shows up for 8 seconds or so. Then the screen fades to black. At this point, the only thing I see is the mouse pointer (which I can move). Pressing Ctrl-Alt-Del doesn't work (does not respond). This black screen lasts for about 40 seconds, then Windows finally progresses to the desktop. Before this problem occurred, Windows faded directly into the desktop after the 'welcome' text. Does anyone know how to solve this?
A while ago, I thought I had the solution to the 40 seconds delay by disabling the Workstation Service. But now I notice some things do not work anymore like filesharing via Hamachi or via standard Windows Networks, or joining a Domain. How can I fix the 40 seconds delay without disabling the workstation service?
Im running Windows 7 Professional x86 final on this machine:
athlon x2 5.000+
2x2gb ddr800 dual-channel memory
ati radeon hd 4650 512mb 128bits
500g sata hd
The os is updated and all the settings of the os are on default. The settings of videocard are in performance/balanced.
The problem was found in counter-strike 1.6 and Urban Terror 4.1 (its a quake3 mod).
In desktop, without gaming or something else, i see that the mouse has some kind of delay (almost nothing here).
During the gameplay i get lag and slow fps...
I disabled the "DESKTOP COMPOSITION" and the problem was not solved but its better with this crap disabled.
I wanna know if you can tell me if there is some config, drive issue, or something else to make it works without this option disabled.
Im thinking in some option on regedit to make desktop composition stop lagging the opengl games.
Does anybody knows how to solve it without disabling the desktop composition?
I like the face of windows 7 and don't wanna loose it for a game too old.
The power went out a few days ago. When I came home, my computer was off, but it's set to turn back on when power is restored (I think 3 attempts max.). I turned it on and everything seemed normal until the "windows is starting" screen (the one with the windows logo on the black screen). I thought the computer froze after sitting there for 5-10 minutes, and I turned it off. I unplugged it for 5 minutes, then turned it back on and ran the repair wizard. It found no problems and I tried starting windows again. After 5 minutes I was going to turn it off again, but I noticed the windows logo was still animated, so I let it sit. After about 20 minutes I heard the startup sound. I came back and windows had loaded. Everything worked normally, as fast as usual, no problems at all. I shut my computer off so I could plug it into the UPS I've had for a while but never got around to connecting. When I tuned it back on, it took 20 minutes to get past the load screen again. I've had it take a couple extra minutes in the past when power was lost, but only the first time I started it back up.
View 4 Replies View Related[code] I have Windows 7 64 bit in HDD1 and OS X Lion in HDD 2 that I installed using Hackintosh distro. I press F8 key on POST screen which gives boot drive selection menu from where I select the HDD to boot from.The system was running flawless on both operating systems until recently. The problems are listed below:
- Almost always it takes unusually long for POST screen to appear (around 60 to 90 seconds) whereas during good condition it used to appear within 5 to 10 seconds of power on
- Sometimes the system doesn't receive display signal
- If I take out power cables from all SATA drives but one, then the POST screen usually appears normally for sometime.
- At one time I removed ALL SATA drives, i.e. both HDDs and DVD then turned on, it turned on promptly without delay.
Then I connected Optical drive and turned on, it turned on properly. Then connected the HDDs one by one, and it still turned on without delay. But this lasted only for 2 days after which the same problem, i.e, either POST screen appears after painfully long time or doesn't appear at all.Before this motherboard, I had Intel DG43NB and had both Os X and Win 7 and experienced exactly the same problem and my hardware guy told me that my motherboard had gone down so I replaced with this ASUS one. Again the same problem with this board
- Where is the problem?
- Could the problem possibly be in the motherboard? I think it's unlikely because once the system starts it works flawlessly, i.e. no errors, no crashes, nothing.
- Could it be the power supply? Since it seems to work better with less load, i.e. some drives disconnected.
- Could it be the GPU?
- What's the best way to diagnose?
- Does the problem have anything to do with my frequently switching boot drive from POST startup menu?
I have a Dell inspiron 1545 with Windows 7 Home Premium x64. I recently reinstalled AutoCAD 2012 Student Edition on my system (I had this installed earlier but I'd uninstalled some of its components).
Since reinstalling, the Windows Logon screen takes around 3 minutes to appear after the Windows logo disappears after booting. The only thing on the screen is the cursor. Pressing ctrl + alt + del does nothing. I can only move the arrow cursor around for 3 minutes.
Restoring the system to a point before I'd reinstalled AutoCAD fixes the problem, but reinstalling it brings the problem up again.
Why doesn't the logon screen show me my account with the password input field already availible? It used to, because I only have one account on my laptop and so whenever I turned it on or when it woke up from sleep, the account was already selected so I could just entered my password. Now the Switch users button has appeared and I have to first click on the account so I can then input the password. I found the solution to disable then Switch users butto, but the account still must be clicked first, as if there were more accounts on the laptop.
View 2 Replies View RelatedI enabled PC Tablet Support in the windows features section of windows 7, but i still can't get windows to pop up that on screen keyboard icon that usually displays next to any type of data input fields.My windows is NOT installed on a tablet pc, but i recently connected a touch screen to my desktop and am hoping to get the same sort of functionality like my tablet edition of xp had.
View 1 Replies View RelatedInstalled fresh copy of Windows 7 build 7100 x86 and there is long delay in boot sequence. Just windows logo animation shows and there is no activity around 1-2 minutes. Then Windows just start up without any error. Anyone know how to check what should be wrong? Previous builds was ok.
On ntbtlog.txt just found:
...
Did not load driver \SystemRoot\System32\drivers\vga.sys
Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS
Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS
Loaded driver \SystemRoot\system32\drivers\RTKVHDA.sys
...
Loaded driver \SystemRoot\System32\DRIVERS\srv.sys
Did not load driver \SystemRoot\System32\DRIVERS\srv.sys
Loaded driver \SystemRoot\system32\DRIVERS\asyncmac.sys
just disabled V-Sync in my NVidia Control Panel, Now when i move my mouse UP It moves fast, but side to side is slower, how would i fix this?
View 2 Replies View RelatedWindows 7 has been giving a bit of issues with delay or lag in typing I called Dell and received help in upgrading drivers.Things seem to work better then it went back to its old waysCan anyone shed light? why is there such a lag in typing when using win 7 having issue with cursor
View 1 Replies View RelatedI've started to experience a strange problem where my laptop seems to be completely idle before starting explorer.exe (So I have a blue desktop with only the mouse pointer) this is after login as I have it set to automatically login. I have tried various things, I have looked through Autoruns and there is nothing which I can find which would be delaying startup, I have tried removing almost everything non-essential from startup however the problem does not fix. I have also tried doing a boot trace with Process Monitor to see if any process is timing out, however nothing stands out to me as delaying explorer.exe from starting.
View 9 Replies View Related I'm running Windows 7 64-bit on a new Asus laptop. I have multiple external USB 2.0 HDDs connected to this laptop via a powered USB hub, one a 2TB Fantom Greendrive and a second a 1TB archive drive. The 2TB drive is my multimedia drive, and contains most of my MP3 files, graphics files and other non-application and backup stuff. I use the 1TB drive as a secondary backup. Both are left connected to the hub at all times. This PC is hooked to a keyboard/monitor which is shared with a second computer (a Macbook) via a KVM switch.
What's happening is that after about 28 minutes of inactivity, the Fantom HDD begins to rapidly click as something begins thrashing the drive. This usually happens while I'm working on the Macbook, so the Asus is receiving no input form my keyboard/mouse (the KVM switch has switched to the Macbook). If I click back to the Asus laptop via KVM switch, the clicking immediately stops.
I've checked the system monitor and I don't see any corresponding spikes in memory usage for the time immediately preceding the switch back to the Asus laptop via the KVM switch, nor has any of my multiple antivirus or malware scans (AVG, Avira and MalwareByte's Anti-Malware) detected any infection. I also checked to make sure that the thrashing is not the result of any automated antivirus scans (all are set to on-demand scanning) or automated backups (disabled - I back all files up manually).
Last, thinking this might be caused by something lurking in my screensaver, I disabled all screensavers and the behavior continued. It seems to happen a few minutes after the when the "Turn Off Display" from power management is invoked - I have power management set to turn off my display at 20 minutes and the thrashing seems to begin about 8 minutes after that (??). This seems like something that would be the hallmark of malware ("start activities only when the monitor is switched off so the user can't see what's happening"), but all my scans come up clean.
I'm not so much worried that some piece of malware is scanning me (although I still think that's possible), as I don't hear the main C: drive being thrashed, nor is the other 1TB drive being thrashed - I'm more concerned about the drive getting trashed/worn out over time due to all the activity.
When I start up my computer, the superbar takes like 40 minutes to actually work. And like right now, I closed a window about 10 minutes ago but the icon is still in the bar. I can't open it up or anything, it's just there.
View 2 Replies View RelatedWhen it came back I installed everything and whenever I start it up there is a 10 second delay before the startup animation starts. then it takes its normal course. When my bootup starts now it seems as if it has a much longer bootup than before I rmaed it and it is quite annoying seeing as I have to shut it down because it will not resume from hibernate or sleep.
View 3 Replies View RelatedThere is a good strait 2min delay between time open a program and time it opens, could this be avast?
I have 4 gigs ram labtop with duel core 1.3mhz 500 gig HD lots people either say its mother board or the HD.
I say I don't mind but it does bother me, i expect it to be faster... is avast slowing everything down? I have played around with the options on windows to speed it up and I can increase speed a bit but to me as long im not gaming (this is a cheaper labtop) I expect it to be quick...
I open a file and its a delay at least 30 secs. programs 1 -2min if it opens at all. I really want a test to explain issue. I be kinda mad if send it back to toshiba and wait a month to be told its not mother board or they don't cover it or blame it on me.... so I rather fix my self if I can.
I have speakers plugged into the tower's rear jack and headphones plugged into the front jack. (Windows 7 x64 HP desktop)The headphones have about a 1/4 second delay - this is also reflected in the tray's volume control level meters.
View 9 Replies View RelatedI have a dual boot, win7 and WinXPsp3. My XP drive shuts down fine but my Win7 drive has a shutdown delay of about 2 minutes and 15 seconds. No music is playing. my specs are
Desktop:
Drive C: W7 Home Premium 80GB NTFS (Sata)
Drive D: WinXP Pro sp2 80GB NTFS (Sata)
Drive E : Storage 80gb (Sata)
[Code].....
All of a sudden today, whenever I open up any program/application (firefox, control panel, documents) the actual window comes up pretty slowly. I don't know if it's a huge problem but it's pretty annoying. Before, if I were to open firefox, the client would open up automatically but now it slowly opens and kind of fades into the screen. I don't think my computer got slower all of a sudden, because it is working fine and it was perfect just yesterday. The same problem happens when I close a window, it slowly fades away instead of just instantly closing.
View 1 Replies View RelatedThis is more of an annoyance but when I initially try to connect to a share on my network it takes about 30 -60 seconds. For example, when I go to \1.1.1.1c$ or even \netbiosnamesharename it will take 30-60 seconds to connect. It will connect and after that everything is fast and reconnecting is quick as well. I can ping the computer with the share during that time. I've tried using the netbios name and the IP. Network is simple, all Gb.
View 3 Replies View RelatedWhenever i enter to Devices and Printers on the laptop it enters immediately but when i do the same in PC (which is way more powerful machine) it enters but has a little (i mean little LITTLE, almost a second xD) but still noticeable delay...So my only guess right now to explain that behaviour is because PC has more usb devices attached to it (3 usb devices), 2 monitors, also the default Fax and XPS printing icons..Is that correct, im being too paranoic??PS: Please post if you have many devices and you have the same behaviourPS2: I attached the same devices that were connected in my pc to the laptop and menu still loads almost immediately in laptop and has a delay in PC.But i've found something, whenever i right click the PC name icon in Devices and Printers in my pc it delays to show the right click menu and doing the same in my laptop and right click in PC name icon it loads menu faste
View 3 Replies View RelatedWhen I hit Caps Lock in Windows 7 an alert (picture of a padlock in grey) icon appears indicating I have turned it on or off. While the alert is showing no input from the keyboard is accepted. This is frustrating because I usually hit Caps Lock and type immediately, and then find about 6 letters have not been accepted. The speed of the system (laptop) is otherwise OK. Is there a way to reduce the time the alert shows, or turn it off altogether?
View 10 Replies View Related My Canon MF3240 laser printer is causing a timeout delay in Windows 7, when completing the loading of the desktop when booting (cold or warm). Long Explanation: When starting the computer, Windows will load normally to the desktop with near complete functionality. But there is a delay of 60 seconds while something tries to initialize or load. During this delay the blue spinning circle ("Working") can be seen over the Network icon in the systray, and over the Currency & Weather gadgets, and in Windows Explorer at the major headings.While the "Working" icon is showing I can open the browser and I have internet access. But I can't open task manager or use Windows Explorer until "Working" is done. The condition was first noticed after I uninstalled my old Canon MP780 printer and replaced it with an Epson Artisan 810. The Canon MF3240 was already installed before this change. I always suspected the Epson printer had corrupted something. This weekend I finally got around to removing all the printers, cleaning up, and reinstalling the printers. I reinstalled the Epson first (using correct W7x64 drivers) and all was good. Windows boots right up onto the desktop and everything is connected - no delays. Then I reinstalled the MF3240. Bang - right off - the delay condition.Now, if I unplug the USB cable for the MF3240 and boot (cold or warm) the delay goes away. What do you think is going on here? More Info: The original installation of the MF3240 was done when I first installed Windows 7. I was new to Windows 7 and there was some thrashing about to get the printer set up, I recall. I finally got it working by manually installing the drivers. These were XP-2000 drivers, best I can tell.
The driver I just installed for the MF3240 is MF3200_MFDrivers_Win_x64_us_EN_7 . I got these drivers from the Canon website for my printer, but I can't remember exactly when, but it was a while ago. I never installed these drivers before. Today, on that website, the only Windows 7 driver available is MF3200_MFDrivers_Win_x32_us_EN_7.exe ". Actually, that is the only driver for all Windows OS's. Also, the downloads above do not contain an installer package, only the .inf's and .cab's. If I knew then what I know now, I would plug in the printer, Windows would not find a driver, I will browse to the folder with the drivers, and the x64 drivers are installed. On the reinstall Windows found drivers and installed them automatically when I plugged the printer in. I had to go to the printer's properties and update the drivers to the x64 version. However, the delay condition happens in either version of the driver that I had installed.
My computer's operating system is Windows 7 Professional which is up-to-date and all the drivers are the latest I can find.The start up sequence is being slowed down by protracted activity on the hard disk, after the display of the Desktop, such that the only programme I have set to start at bootup is delayed by up to three minutes. This is the antivirus programme F-Prot Antivirus for Windows 6.A log obtained from msinfo32 shows the following:
System Information report written at: 01/04/11 23:29:32
System Name: TESTNET
[Startup Programs]
Program Command User Name Location
[code]....
As I do not use the Sidebar is it possible that Windows is trying to start it causing the delay? If so, how do I disable the autorun registry entries? I have no recall of how or even if I disabled the sidebar from loading.
Whenever i enter to Devices and Printers on the laptop it enters immediately but when i do the same in PC (which is way more powerful machine) it enters but has a little (i mean little LITTLE, almost a second xD) but still noticeable delay...
So my only guess right now to explain that behaviour is because PC has more usb devices attached to it (3 usb devices), 2 monitors, also the default Fax and XPS printing icons..
Intel 82801GH I/O Controller Hub (ICH7DH) SATA Controller in IDE mode. Windows 7, SP1, Home Premium, 32 bit. Plextor DVDR PX-L890A ATA Device. HD and CD-ROM both connected to black connectors on Intel D975XBX2 MoBo. BIOS set on default. With CD-ROM connected POST proceeds normally until it gets to "EB" test where it hangs for 2 minutes then proceeds to integrate with the OS. When integration complete, the CD-ROM and OS operate normally. If I disconnect the CD-ROM from the black connector, POST and integration proceed normally and rapidly.
View 1 Replies View RelatedMy monitor remains in powersaver mode until windows logon screen comes up. This started happening a while ago and i have been putting off asking baout it. I have searched google but have found no answers. I am unable to browse bios or anything and it is really annoying. [code] Steps to reproduce problem:
1. Turn on computer
2. Monitor does not display until logon info needs to be put into windows