Mic: Razer Carcharias
OS: Windows 7
Sound card: Creative Labs Sound Blaster Audigy SE
Just as the title says, my mic is only getting my computers output instead of its own input. It happened randomly, I walked away for a quick second and then it was like this.
This doesn't work. Very irritating.(I don't know if this RealTek sticky at the top of this forum is a solve for this, I'm not hot on registry changes and I'm not sure if this is a fix for this issue.)Firstly I have to turn off the front-panel detection in order for the front panel to be detected..?Secondly, I can't get the speakers to mute when the front phones are plugged in. I can do a manual switch from one to the other, but the front panel won't detect when things are plugged in.
View 9 Replies View Relatedi just discovered "action(s)" and i would like to know if there is a way to set it up to execute a command line task such as: csp -i <file name> -o <output bmp)can i set up action(s) to ask for the input file name and the output bmp path and the execute the entire task?
View 4 Replies View RelatedHow can I setup a simple client-to-server audio-streaming solution that will take mear minutes to setup? I want people to be able to play their music using whatever program or web-site they want over the local network to the stationary computer connected up to my sound-system.
I found something about Virtual Audio Cable & Axia IP-Audio Driver but VAC is a bit to complex for me to set up and Axia's IP-Audio Driver is impossible to find. Anyone got a solution to this?
how do I install system speaker and get sound output on my computer?
View 2 Replies View Relatedmy computer alert no audio output device installed.
View 2 Replies View RelatedWe're running an Oracle application that requires the jinitiator 1.3.1.22 on the client pc. Prior to Windows7 we only had a problem that required replacing the jvm.dll file within the Jinitiator installation folder. With Windows7 64bit and/or 32bit, we're seeing where some clients can open IE9 and get the popup logon screen as expected but nothing you type will show in the logon area until you click outside of the window and then come back to it. We've noticed that unless the cursor is blinking in the logon window it will not display anything that is typed (unless you click outside the window and come back to it). However, some users can use the 32bit IE and never have a problem. Sometimes you'll get a message that Windows is changing the basic theme.
View 1 Replies View RelatedI am looking at getting a new laptop.I have my hart set on one model, with several, variations.Here is the first one Amazon.com: ASUS G73JW-XA1 Republic of Gamers 17.3-Inch Gaming Laptop,Black): Computer & Accessories No definitive answer on to which kind of optical drive this has... Some reviews say it has a BR others says DVD. Slightly cheaper Biggest HDD ASUS G73JW-XT1 Laptop Computer - Intel Core i7-740QM 1.73GHz, 8GB DDR3, 500GB HDD, Blu-ray Player/DVDRW, 17.3 Full HD, Windows 7 Home Premium 64-bit, Black, 2-Year Warranty, 1-Year Accidental at TigerDirect.com Cheapest smaller hdd Amazon.com: ASUS G73JH-X5 Republic of Gamers 17.3-Inch Gaming Laptop - Black: Computer & Accessories Blueray for sure. most expensive decent hdd space 1.6 ghz processor over 1.73 ATI 5870 1GB not the NVIDIA GeForce GTX 460M 1.5GB not an issue since im more of an ATI person
View 9 Replies View RelatedYesterday my computer crashed, but I got it working quite quickly again. But when I was to write to my friends in a chat (I am swedish) I realized i could not write any swedish letters. And all the 1-9 shift functions were moved or gone too. It has taken me a while to figure out where the functions are now (like ? ! @ etc). So anyway I thought that the input language must be acting wierd. and when I were to look what language i had on, there were none. No input languages. None. I cant add, because there are no languages to add. They all are gone.
View 5 Replies View RelatedI have an hp a6403w Intel m board .I keep getting no input screen on monitor.So far i have put in a new video card.. New power cord no help.tonight i bought new 750 watt power supply no help.I have pulled out memory chips powered cpu on get beeps put back in no help.I have tried onboard video no help. I have tried to pull out power cord holding power button on for 60 sec plug back in. you guessed no go. all lights come on cpuprocessor fan are working ovideo card fan runs.
View 3 Replies View RelatedIm having a tricky question I thought I had answered. I have a 32-bit Win7 machine that I just unpackaged and setup for a user. I was having problems with windows not responding to mouse or keyboard commands after what I thought was a sleep issue. I disabled hibernation, sleep, hybrid sleep, HDD power downs. Now the computer just turns off the monitor, User always turns off his PC and actively uses it all day. I thought this had fixed the problem, I just left it running in my office and would just make sure it responded. I just installed the new machine last night thinking I had fixed the problem. As the user was typing an email he "Claims" that the screen just went dark and he couldn't get it to come back on. The light on the monitor showed activity (Wasn't the orange sleep light) but wu9ld not return from this state. I have to manually power down when it does this.
View 1 Replies View Relatedi have a windows 7 computer that i got second hand from a computer repair place. it's a new install, but not genuine apparently. all this computer is used for is surfing the net on a large monitor/watching netflix/hulu/Internet.so, had a few bsod problems with netflix and similar, but nothing big, until monday. on monday, it suddenly wouldn't take any input from the mouse after the first few clicks. sunday night it worked fine, the most recent change was an installation of dvd decrypter on friday. however, monday it will load up, allow me to click past the "not genuine" screen, and maybe click one or two more things, then any time i click above the taskbar, there is no response. the weirdness is that i can do anything from the taskbar. open/close new programs, access the windows menu, etc. but if i click an open window, it deselects it, like i had clicked an empty portion of desktop. this also occurs if i click an icon on the desktop. the keyboard works fine, and it's part of a wireless set.
i tried cold-booting it, and a new mouse, neither worked.finally, i did a system restore to about 3 days ago. this seemed to restore complete functionality. however, i just found out from my wife that its' exhibiting similar symptoms-- she will go to netflix and everything will work fine, until she got to the page where something was playing, at which point it wouldn't accept commands again.
I'm getting a strange problem when starting up my computer. On initial boot, one of the messages on screen is "press del to enter setup". At this point, the keyboard works fine-I can go in and change BIOS settings without any problem. However, if I let it contimue booting up, another message appears-"Press any key to boot from CD". This is the one I want, but at this point the keyboard has no effect. Even pressing F8 does nothing.
View 5 Replies View RelatedWe just bought a Hp Pavilion p6-2133w, we hooked it up to a sony monitor, we had to hook them up with a adapter that takes the dvi-d from the computer and adapts it to vga for the monitor. The problem is the monitor doesn't act like it is reading the signal.
View 5 Replies View Relatedcookies are blocked without any input from me? how can i fix this?
View 1 Replies View RelatedFor some odd reason there is a noticeable delay once my laptop wakes from sleep. It will display the "press ctrl-alt-del" welcome screen almost instantly, but it takes 10-20 seconds for it to recognize when I actually press ctrl-alt-del. I don't remember it doing this when I first installed the RC, and I don't have any credential management software running. This is on an HP 6710b.
View 0 Replies View RelatedI have the same PC config as a Core i5 2400 3.1Ghz,Intel DH67BL,4GB RAM DDR3 1333Mhz(2x2GB Corsair,Kingston),1TB Seagate 7200.14 HDD with no add-on cards.For some days I am not going to "play" graphics intensive games like Call Of Duty series,Crysis,Assassin's Creed series etc.So I took graphics card(XFX GT 240 1GB GDDR5) from PC and kept in it's box with electrostatic bag and silica gel and I hope it will remain in good condition for a long time.By the time,I use Intel HD Graphics 2000 Series and I think it will be sufficient for my current activities which include just watching HD movies and playing "chess titans" and "minesweeper".Why I did this becuase I just need to save power
View 6 Replies View RelatedI have an Asus P6T motherboard with Realtek ALC1200 on board audio and Windows 7 64 bit OS, DirectX 10, Audio Driver version 6.0.1.5859. The sound works normally for all audio functions. I installed Nero and went to use the Wave Editor application to record a song from the web and got the message "Unable to open recording device". Going to Options > Device Settings > for an Input Device there only shows "MMEwave mapper)". There is no other input device listed. In Device Manager the "Realtek High Definition Audio" device shows as the only device. Going to "Manage Audio Devices" and the "Recording Tab" there shows only "Microphone" and "Line In". There is no "Realtek Digital Input" device listed (as I've seen in web screenshots from others). how to get an input device listed to use with Nero recording?
View 9 Replies View Relatedhow to give the input to tts256
View 1 Replies View RelatedSo I downloaded SWTOR and when it opened up my monitor said "input rate not supported" My monitor is a dell st220l.I tried booting into safe mode and changing the refresh rate but there is no where to change it. What the heck do I do?
View 3 Replies View RelatedStarting today my computer has been randomly turning itself off, although running lights are still on, and the computer sounds as if it is still running normally.Essentially what happens is that it crashes out, the monitor says input signal lost and then nothing happens. First two times it crashed whilst using Photoshop. Third time I installed a program to monitor the HDD temp. It was running just over 40c when it crashed again (had a low end game running to see if the HDD temp would rise). I waited 30 min before turning the computer on each time.Opened the case to check for any build up of dust, it seemed fine.I have also checked that all the cables are plugged in correctly.Also definitely something wrong, because holding down the power button didn't turn it off. Had to turn the computer off by the switch at the back of the computer.Only thing new with the comp today was updating Microsoft.Net framework, a few hours before the first time it crashed.
View 4 Replies View RelatedMy new PC with windows 7 won't detect my old Acer v243w monitor. I was hoping to use dual monitors, with this monitor connected via vga into the motherboard and my other monitor connected by DVI into the graphics card. The graphics card I am using is a Radeon HD6870. It has DVI slots and an HDMI slot but no VGA slot.
Even when the Acer is plugged into the motherboard by itself using VGA it does not get detected then either.
Is it simply a case of getting a lead which will convert my VGA lead from the Acer monitor into a DVI output which I can then plug into the graphics card?
Or perhaps there is a way of enabling VGA support, maybe via the graphics card or something? It seems odd to have a VGA socket in the motherboard if it is not going to work.
Why doesn't the logon screen show me my account with the password input field already availible? It used to, because I only have one account on my laptop and so whenever I turned it on or when it woke up from sleep, the account was already selected so I could just entered my password. Now the Switch users button has appeared and I have to first click on the account so I can then input the password. I found the solution to disable then Switch users butto, but the account still must be clicked first, as if there were more accounts on the laptop.
View 2 Replies View RelatedI am using Windows 7 Ultimate 64bit and I'm confronting a quite annoying problem while trying to use the Japanese input.This is what happens, I switch on the Japanese input from the language bar, then I select the hiragana alphabet. It seems to be working properly if I use only hiragana pressing Enter after each word. But if I try to use kanji, after pressing Space, when I try to select the one I need from the scroll menu that shows up, the program I am working in freezes saying it's not responding. The program can be closed at the 3rd click showing that window with "Check for a solution and close the program/Close the program/Wait for the program to respond" and at the details it has a "Problem Event Name AppHangB1".This happened to me while working in Microsoft Office, Mozilla Firefox, and even in Notepad or Yahoo messenger. Though, it seems to be ok in Internet Explorer.I tried to reinstall the the Japanese language, but nothing changed.
View 1 Replies View RelatedThe problem is, when I've got one input language chosen and am working on a Word document, I am able to write using that language. As soon as I open other software (for example start searching the web), the input language changes automatically. This means I cannot write my document and then proceed using same language on the Internet, but I have to change the input language separately when I swap from Word to Internet browser.Is it possible to change the settings so that if I'd be using one input language in one software, after changing the software the input language would remain the same and not change? It is quite annoying, though it is probably helpful for those who are using different languages in different software and don't want to swap the language every time they move from one soft to another.Another annoying thing is that I cannot give the name to my file if there's a folder which has the same name. If I have folder 01 on my desktop and I have a file which I want to name as 01, as I press "Save" the file isn't being saved. Windows just opens the folder named 01 and shows it's content (in the same window where you need to enter the filename and have Save button). How can I change this setting so that Windows would let me save file 01 even though I've got folder with the same name.
View 4 Replies View RelatedI have a problem with adding a language input. Under 'Text Services and Input Languages'--> 'Add'--> theres only english and chinese input as available options. I want to add korean. I've tried windows update but no luck.
View 1 Replies View RelatedPut this in here because instead of the gaming forum since it seems to be a system-wide issue since it happens with multiple applications as opposed to just one game.Okay, so this has been a problem I've had with multiple computers for a while so I was wondering if it's a bug with my setups or if it's just how the Xbox 360 controller generally behaves in Windows.For example, in Skyrim, with the 360 controller attached, controls feel slightly delayed and the action isn't smooth at all, at least not compared to playing Skyrim on an actual 360 with the 360 controller. It's mostly evident with the right control stick (don't worry, the actual controller is fine - works perfectly on Xbox 360).To better explain - if I try moving the right analogue stick in a circular motion to look around - the result is that it really jerkily, like in a square, moves right, then down, then left, then up as opposed to actually doing a circular motion, and generally switching from looking from say up to, say, looking right, is a mess.
View 3 Replies View RelatedI want to simply connect my satellite receiver (has HDMI, composite video, it also has some sort USB) to my PC so that I can watch TV while working without needing a separate TV in my office. I have 2 monitors.
- I don't want to buy expensive vivo card
- I don't need to record, just watch live from Satellite Receiver (or a different source)
- sound should be transmitted
- should work regardless of PC graphics (currently have G45 onboard video, may buy i3 with onchip graphics only)
I found these StarTech Video-to-USB devices but read mixed reviews and it seems those are geared towards videoconversion and often have sound problems.
Ever since I upgraded to Windows 7,I have been having problems with my Intuos 4 graphics tablet. It seems as though the drivers are "uninstalling" themselves, because every time I start up,I have to re-install the driver(I don't have to uninstall the original). Recently , the problems have gotten worse. Now, even after installing the drivers (again), I'll get no input from the tablet.
View 4 Replies View RelatedI recently installed Windows 7 RC on a 1.5TB hard-drive first. Then installed Ubuntu. During system startup and on the boot manager screen (where one can select the OS to load) - the screen simply does not respond to any key input. I can't select the OS that I want to boot up. Instead it always boots up the default Windows 7 after the wait time of 8 secs.
View 5 Replies View RelatedIt doesn't affect anything but my browser. What happens is this: Once I get into Firefox any bookmarks I try to select only responds to multiple "Reloads". Nothing else in the system has non-response like this. I've uninstalled the software and reinstalled the software to no avail. I'm asking about this only because I can't find anything concerning this problem on the mozilla website. Am I alone or is anyone else having this problem also.
View 2 Replies View Related