Windows 7 Installation Stucks When Loading Windows 7 Logo(icon)?
Jun 27, 2012
My Samsung RV520 came with Windows 7 Home Premium 64-Bit installed, i formated the HDD and Partitioned it into 2 Drives @ 250gb in a bid to dual boot XP&Windows 7.After succesful installation of XP-SP3, ive encoutered a problem with Windows 7 Ultimate (both 64x and 86x) installation as i booted from dvd and also via usb too it says windows loading files and stucks when the Windows 7 Logo is Loading. What could be the problem?
View 1 Replies
ADVERTISEMENT
Dec 30, 2010
I just installed a new SSD and put a few programs on it. I boot windows XP from my current HDD. I also have a copy of windows 7 that has only been used once, so I was going to use another one of the installs from the disc for my computer. I wanted to put windows 7 on the new SSD, while leaving xp on the old HDD. I would then just make the SSD have boot priority, without having to worry about formatting the old HDD etc.
Well, when I put windows 7 in, and choose to boot from disc, it'll show the black screen where the loading bar goes to completion, then switches to a black screen where the colored balls form the windows logo, and finally the screen turns blue with some slight designs in the back (I believe it's the default windows 7 wallpaper). The mouse icon shows up, but that's it.
I can hear the disc stop spinning, and no additional windows pop up allowing me to complete installation and everything. I've reset all BIOS settings to default. I've tried making the SSD have boot priority over the HDD but it still freezes at the same spot. Everything I've done cause it to freeze at the same spot, actually. I've triple checked that all of my hardware is compatible with windows 7.
View 6 Replies
View Related
Jan 2, 2010
Had an automtic update occur last night for Win 7 PC and this morning the Excel Logo on the Excel Button is missing. I use to be able to associate the program with the Logo in XP, but do not know how this is done in Win 7.
View 8 Replies
View Related
May 18, 2012
I just turned on an almost new build pc to install windows 7. The entire pc is a new build except the hard drive that has a good copy of xp installed. I am trying to install a new copy of windows 7 on the hard drive. So I turned the pc on and go into the bios to set the DVD to boot first. So windows starts to install and the window is loading bar comes up. After the bar gets over half full, the screen drops and there is a line of h's on the left side of the screen and the installation freezes.
View 2 Replies
View Related
Jan 9, 2010
My network icon freezes on launch every now and then and when it does my PC is very slow it takes over 10 seconds to load a browser page, so basically the only solution is rebooting. is there any way to fix this?
View 1 Replies
View Related
Jun 4, 2011
When I first turn on my computer, I click on my homepage icon to take me to my homepage. I only get the toolbar and I have to drag the rest of the page down. If I want to look at something else on that page, I have to pull that page down to read it. If I want to go to another site after pulling down my homepage, the other site will fully load. This started happening over a week ago.
View 4 Replies
View Related
Jul 31, 2010
I recently finished building my custom pc, and tried installing Windows 7 Home Premium on it. I got to where it says "Windos is loading files", the white bar filled up, then it would repeat but slower. So far so good, but then it took me to the screen with the background, where one would normally log in to a user account, but it was completely blank, except for the cursor. So I rebooted the PC and tried reistalling it, and then after the "Windows is loading files" screens, it just gave me a blank black screen with only the cursor visable. I tried this several times but always got the same result. Now, i just the blue screen of death.When i don't boot from the CDROM, my computer freezes at "Verifying DMI Pool Data....." I tried resetting my CMOS, but that didn't change anything, so i'm pretty sure I'm getting that message because there's no operating system because Windows 7 won't seem to finish its installation. The HDD i bought said it came prepared for Windows 7 so there shouldn't have to be any formatting or whatnot done. I am thoroughly perplexed
View 9 Replies
View Related
Oct 22, 2009
I just got a copy of windows 7(64-bit ultimate, because its from my college its the upgrade version) and I'm having some install troubles. The installation keeps freezing right when it finishes loading the dvd.
Currently on windows xp. We know the dvd works (tried it in a different computer) and the dvd drive in this system works (tried using different operating systems). I can move the mouse around, and no keyboard shortcuts appear to work. I had the windows 7 beta installed a ways back, so I know the OS works on this system.
View 3 Replies
View Related
Oct 30, 2009
I checked the forums and could not find my specific issue.
The other day, I successfully installed Windows 7 Ultimate (full version, clean install) on my primary "C" partition and everything worked. Now, I believe I have a corrupt OS. When I attempt to boot normally, I receive an "Error loading operating sytem" message. The Windows 7 installation CD is detected, and begins booting, but following the "loading Windows" screen no options are displayed.
Here is what I did to cause this issue:
-I had an old external drive not compatible with Windows 7, so I decided to try and install XP onto a secondary partition.
-In order to create this partition during the installation, I deleted my "E" partition which I had previously locked with BitLocker. I left my "C" partition (System Rese) and "D" partition (with Windows 7) in tact.
-I began installing Windows XP. Upon reboot, I received my first "Operating SYstem Not Deteced" error.
-I tried booting from my WIndows 7 CD to see what was going on, but following the boot from the CD, the installation program stpped running before any options were displayed. This occured after the "Starting windows" message was displayed.
-I tried booting from the Windows XP install CD. This CD boot properly. I deleted the partition I had attempted to install XP on.
-I tried booting normally, and "Operating SYstem Not Deteced"
-I tried booting from the WIndows 7 CD again and "Operating SYstem Not Deteced"
At this point, I am considering loading from the XP CD and deleting all partions with hopes for a fresh Windows 7 installation.
Anything else I should try before deleting my partitions?
View 4 Replies
View Related
Dec 12, 2011
I wanted to install Movie Maker but it comes packaged with Live something or other, and it includes Live Mail, the newest version. Now, I do not have Movie Maker, don't even ask! But I have a newer version of Live Mail which I dislike -- that ribbon! Can I uninstall the Live software and reinstall the old Live Mail? This install window that pops up is very annoying and if I click cancel it still loads Live Mail. I saw a similar case some time ago when I opened MSN Messenger.
View 3 Replies
View Related
May 1, 2012
During a recent windows update my pc froze, (mid-update) and I restarted my machine. Now windows gets stuck at the black" Loading operating system..."screen. After a long wait it will eventually display boot from cd/. When I boot from my windows dvd my os is not shown in system recovery. I Have also tried running start up repair from recovery with no luck.
View 7 Replies
View Related
Mar 13, 2012
sharing hand icon not showing in win 7 home basic
View 1 Replies
View Related
Sep 11, 2009
My laptop is an old IBM Thinkpad T43 and there is no windows key logo in the keyboard.
There is any way in Windows 7 to set up other key to do the windows logo key function?
View 9 Replies
View Related
Jan 21, 2012
I have spent the last few days working on my friends Sony Vaio PCG-7184L(which by the way is not listed anywhere on sony's website). It runs windows 7 64bit and it freezes immediately after the Windows logo starts it's animation and there's about an inch of the top of the screen that is filled with weird colored lines. So I told him sure, I'll fix it, it's probably just a virus and should be fairly simple. I will list in sequence what I have done so far to diagnose/fix the issue. One more thing, it started doing this freeze up thing the same day he got it back from the Geek Squad at Best Buy, who were doing a simple update and cleaning from what my friend told me. Tried booting into safemode, froze, on hal.dll, with same colored lines at top of screen, Tried booting into ERD Commander 2k8 and froze at the same spot. Booted into Linux live CD and scanned for viruses with avast, there were none.
View 2 Replies
View Related
Nov 17, 2012
Windows 7 Home Premium x64 will hang after the "Starting Windows" logo, showing only a black screen, forcing me to hold down the power button.Windows will boot in safe mode and will boot if I disable my video card from Device Manager.I have run hard drive and memory diagnostics without any errors showing up.I did not change anything before the problem began occuring.I've already tried restoring to the initial system image from Lenovo OneKey Recovery (I'm using an IdeaPad Y560) and using the Windows System Restore, as well as updating drivers and BIOS.Attached are my event logs in administrative view from today (The problem has been occuring for a week or two, however, I don't have access to logs from that time), in which I reinstall my drivers and attempt to install a download manager in safe mode among other things.
View 8 Replies
View Related
Dec 16, 2012
Today when I turned it on it happened... I tried restarting and run repair mode, checked all the fixes and that but still failing... What to do?
View 1 Replies
View Related
Jul 9, 2011
After a recent power failure at my home, I tried to turn back on my computer and I get hanged at the windows 7 logo. I tried to restart multiple times but it don't work. So I to to do safe mode but it don't work either. It gets stuck when it loading to drivers. So I tried to put in the windows 7 installation disk to try and reformat my hard drive, but even that gets hanged at the logo screen when it tries to boot up.
View 4 Replies
View Related
Jan 15, 2013
When you turn it on it gets to Windows logo animation and at the beginning of the animation it just restarts.I loaded a Windows 7 image and tried the start-up repair but that gave no results so I thought I'll heck out the bootcat.cache file.
View 9 Replies
View Related
Apr 19, 2011
I recently built a new setup using two 350GB Western Digital SATA hard drives. They are raided and until today I've had no trouble with the computer at all. When turning my computer on it loads to the Windows logo (the pulsing coloured "squares" ) and after 10 seconds or so it reboots. When booting up it detects my raided drive however when I insert the Windows 7 cd to enter the repair menu it doesn't see the drive. What I mean is on the screen where you choose the OS to repair, it does not appear. It DOES appear, however, after inserting a USB device with my raid drivers on it and then locating them first. The trouble is, the first time I did this it detected my 700GB raid drive (or approx 630GB space). The second time, however, it only detected my old 200GB drive which I store music on. After switching to different SATA ports as suggested by another post I found on the net, I then encountered a 0xc000000F error which reads "0xc0000000f. Info: The boot selection failed because a required device is inaccessible". I tried doing a MBR repair but I don't think it worked.
View 6 Replies
View Related
Oct 22, 2011
i need the dell logo for win 7
View 1 Replies
View Related
Nov 23, 2012
AMD FX(tm)-4100 Quad-Core Processor 3.6 GHz CPUKingston HyperX 8GB (2 x 4GB) RAMGeForce GTX 560 Ti GPUm5a78l-m lx plus MOBO600Watt PS So the problem began a few months ago. it was a random shut off here and there. i was given 2 new parts after the problem started. it was the power supply (old one was 455W) and a new GPU (old one was gforce 9800). to think of it the problem might have started when i got a new motherboard cpu and ram. so im pretty sure one of those 3 is the problem. bare in mind that it would shut off aspecialy during game play but still only doing it once, twice a day. Now it shuts off while watching a movie or even chatting on facebook and when i try to start it, it just shuts off on me during the windows 7 logo loading again. it gives me 2 options to boot from: normal, and repair mode. if i go normal it just shuts down. if i repair it not always but sometimes fixes the problem for an hour or 2. but sometimes it just shuts off again.I play this game of cat and mouse for about 4-5 tries and get it to load. it's like an old car. forgot to mention i also went from windows vista 32bit to windows 7 64bit and problem is still here my computer uses 4GB ram for hardware reserve which i don't mind. i tried to reset the bios from a backup and it still keeps screwing with me.
View 9 Replies
View Related
Jan 12, 2013
I have installed windows 7 ultimate yesterday on my new SSD. it worked fine after i installed it.. today I started my PC and i noticed my windows is stuck at the Loading Screen.. Already did some research with no luck. I already tried to do Restore Point didn't work.
View 5 Replies
View Related
Jan 9, 2012
I have just bought a laptop with OEM Windows 7 in it. There are some minor annoyances in it. When I switch on the laptop, a logo of the institute from which the laptop's seller got the laptop (the engineering institute presents a laptop to every student), appears then booting process continues as it should.
I wish to remove this logo. Also, CD/DVD Drive isn't visible in Computer.
View 5 Replies
View Related
Aug 2, 2012
I have recently purchased an i7 Ivybridge, Corsair Vengeance 8GB and Asus Z68 to upgrade my home built PC. Today, after assembling the parts, the usual splash screens show up all the way up to the windows logo. After windows finishes loading, a STOP: 0x0000007B error prevents me from going further. I have attempted to restore to 2 days previously with no effect and startup repair cannot solve the issue. When using my old motherboard, windows starts normally. Diagnosis and repair details state the Root cause as 'Unspecified changes to system configuration might have caused the problem'.
EDIT: Switched ACHI to IDE in BIOS. This allows me to reach the login screen but I am unable to use mouse & keyboard.
View 2 Replies
View Related
Oct 18, 2012
I have a 7 month old Gateway desktop I got from Best Buy. Not long after getting it I replaced the power supply and put in a graphics card, no problems whatsoever. I didn't plug or unplug anything, but this morning I tried to turn it on and it sticks at the black screen with the logo, the logo will do the small wave thing and pulse but the computer won't go past it. I have tried recovery, repair, memory repair, and CHKDSK, all say they can't fix it automatically. Safe mode doesn't work and gets stuck while trying to load the files for it.
I took out the PSU and GPU and put back in the original power supply and it didn't fix it (not good with hardware so don't laugh if that sounds stupid). It did not come with a Windows 7 repair disk. I don't want to take it back and trade it in because I have files on it I want to keep, is there anything else I missed that may fix this?
Specs are (general as I don't know specifics):
Windows 7 Home Premium 64 bit
i5 2320 CPU quad core @ 3GZ
8 GB RAM
Radeon HD 6770 GPU (Intel HD now that it's taken out)
View 1 Replies
View Related
Dec 29, 2012
Windows 7 won't boot past logo. Will not repair when selected. Running in safe mode stops at Loaded:windowssystem32driversdisk.sys. Have tried to reload windows 7 and it says files are loading then comes back to the same point and locks at the windows logo.
View 2 Replies
View Related
Mar 2, 2011
I was wondering if there is any way to change the windows 7 start up logo. Right now when I boot up windows 7 it shows the vista like start up. Is there any way to change it to the new windows 7 startup logo?
I upgraded to windows 7 ultimate 32 bit
Dual boot windows xp home edition and windows 7 ultimate
I have a dell dimension 2400 with onboard graphics (Intel 82845G)
60.5 mb graphics memory
View 4 Replies
View Related
Mar 9, 2010
As the title says, I want to change the boot logo in windows 7. How I do that ?
View 6 Replies
View Related
May 20, 2012
I have a HP Pavilion G6 notebook and Windows 7 Ultimate 32. The OS froze today while I was working and the only solution was to shut it down by holding the power button. I restarted it afterwards and after the Windows 7 logo screen my display shuts off (it's not just a blank screen, the monitor is off). I tried using system restore and it gets me as far as the log-in screen and after I enter my password, it gives me another blank screen (this time the monitor is on, but the screen is blank) and ctrl+alt+del does not work, nor does anything else. I am writing from safe mode right now, it seems to work just fine, but a normal start-up gives me a black screen.
View 1 Replies
View Related
Nov 19, 2011
I'am running windows 7 professional. When i boot the PC, i have no trouble up to the point of the windows logo. When this disappears my screen (SyncMaster 913n) keep displaying the text "optimal screen resolution is 1280x1024 60 hertz" and then i dont see anything else than that. Even if i change the screen resolution to 800x600 i get the message. My GFX is 8800 Geforce GT with the drivers 285.62 (64Bit) same issue. Everything was working fine earlier today, then after a reboot i got this issue. The computer is a clean re-install so can their be missing some drivers besides the GT 8800 that can make the problem?
View 4 Replies
View Related
Jan 24, 2012
today i was working on the PC when the power got down for a second, i started the pc and the power blinked again, so i just waited 30 mins or so and i turned on the pc again, but this time it only got to the color balls that form the windows logo, showed the "please wait" message with a black background to finally led me to a black screen with the windows 7 ultimate logo on the bottom center, a button with some accesibility options to the left and the red button to turn off and reset the machine,i cant do anything more, Ctrl+Alt+Supr doesn't work or the windows key+R. starting in safe mode doesn't change anything neither.
my specs are:
Intel core 2 duo 2.4 ghz
2 gb RAM
250 GB HDD
geForce 9500 gt
PS: i didn't install or configure anything before the second time the power got down, and after the first one the pc started fine.
View 1 Replies
View Related
