I have just installed Windows 7 Home Premium 32 bit on my Dell Precision 670 desktop. At first the sound worked OK untill I downloaded and installed R145551.exe. audio driver.Now there is no sound. The older driver which worked in Windows XP does not work now. Is there a sound card that will be compatible my system as it is now?
View 2 RepliesI have a USB DVB card that works good! 3 days ago I have working on virtual com ports in matlab soft! and after that when I connect dvb card to my laptop usb ports the dvb software doesn't detect dvb card! and shows this message: all capable dvb adapters are busyno free device has been found after that I try to reinstall matlab and dvb soft and dvb driver too, but it hasn't work yet
View 6 Replies View RelatedI have had high definition audio device in my system which never worked despite much effort. Finally I bought a new sound card and installed it's software from it's CD. The sound function started working but now I am again seeing the red cross on volume icon which says no audio output device is installed. I went to device manager but I can't see the new sound card there so that I can reinstall it's driver.
View 2 Replies View Relatedi have installed a copy of windows 7 and cant get a compatible sound driver to work
View 3 Replies View RelatedMy harddrive went out and I put a new one in. It was a brand new drive and I loaded Windows 7 Home Premium 64bit from my laptop's recovery disk that came with the inital purchase. When I started to add the drivers 2 of them came up as unable to verify the signatures. Most importantly the driver for my Wifi adapter, which is an Intel Wifi Link 1000 BGN says this. Windows refuses to run it in that state. So I have no internet and it says that the adapter is not installed or is disabled. When I go into the Device Manager the adapter is there with a yellow "!" and has an error code 52 (for unsigned driver). It shows installed and enabled though I installed the driver from the intial driver disc and it says unsigned, I was able to get the latest driver from Intel's website and that too says it can't verify the digital signature.When I boot into the F8 screen and disable driver enforcement I am able to get online.I'm not sure if this is related or not, but regardless of how I boot, Windows updater and troubleshooters do not work.
View 3 Replies View RelatedI have this mainboard : Asus P5GDC Pro with integrated sound card. Automatic installation of High Definition Audio Device fails and it fails each time I try to unninstall the driver and let windows install it again. I tryed some UAA drivers from Vista, but after installing it behaves like I have not installed anything.
On Win XP I was running C-Media High Definition Audio driver and it worked without any problems. Now it shows "This device cannot start. (Code 10)"
Also in system tools my High Definition Audio controller shows (This device cannot find enough free resources that it can use. (Code 12) If you want to use this device, you will need to disable one of the other devices on this system. You need to restart your computer before the changes you made to this device will take effect) , but its displayed twice there and the other one works fine.
Removing the entry in the registry and uninstalling the driver worked = perfectly.
View 1 Replies View RelatedI have built all of the PCs currently in use - one that my youngest has access to has an MSI Motherboard in it (sorry haven't got the mobo manual to hand at the moment.Purchased an upgrade from Windows XP Pro to Windows 7 as youngest in education got a discount on the upgrade. Windows XP has to be present at point of install - cannot be a direct install or installation upgrade from within XP. In XP all the USB ports work normally but in 7 the bottom 2 (USB2) are 'dead' in 7. The MSI forum begs to differ. And I know not to add any USB peripheral device before installing software. Processor is a 2.4 Ghz AMD Athlon 64 AM2 Processor and an AGP card (8x) that requires two power sources. Power supply is 450 W - is this too low? 1 Gb 400 MHz RAM, 170 Gb Hard Drive shared equally between Windows XP and 7.
View 9 Replies View RelatedI'm new to this. I was working with Windows 7 32 bit and recently decided to take advantage of more RAM for recording music by upgrading to Windows 7 64 bit. However, after the upgrade installation my WD MyBook Studio II 2tb is no longer recognized in "My Computer" when I hook it through firewire OR USB (Yet all other devices work as they should) - So I've been to Disk Management and it shows up as a disk. However, there is still no letter assigned to it. When I right click on it, the only option is to delete volume. As you can see in this picture it shows up as disk 2 with three separate regions.
Now, when I hook it up to a MacBook running Leopard the WD MyBook Studio II works just fine and all of the files are accessible. I've also tried uninstalling the drivers, powering down and reconnecting, updating drivers. I've also switched my firewire controllers to (Legacy) in Device Manager. I still am not able to access my external drive within Windows 7 64 bit Home Premium - YET it worked great with 32 bit.
I can't remember if I disconnected the external drive from the computer when I upgraded Windows, but would that potentially have affected the install? How do I get access to my external drive if it won't show up in "My Computer" when it shows up perfectly fine on the MacBook running Leopard? Right now I'm using just less than half of the drive at around 800 GB and it's made up of two separate 1tb drives. I'm completely lost. Does anyone know a solution to my problem?Also: Windows lists my specific external drive as compatible with Windows 7 64 bit.
I had dual monitors working from Vista desktop, using a VGA/DVI from a single video card. Last week, the HDD failed, so I figured it was time to step up to Win7. Bought Win7 Home Premium, bought HDD and installed.... See dual copies on monitor screens during boot, but when the boot goes to switch over to the HDD, both screen go and remain blank... Hitting keys and moving mouse, I hear disk noise that leads me to believe the machine is processing my input, but I just can't see it. Confirmed by disconnecting one monitor. The machine boots fine w/single monitor hooked up, so it doesn't appear to be a "sour" install. Just odd that everything worked fine in Vista, but balks in Win7.
View 1 Replies View RelatedWindows 7 will not start, System recovery has not worked
View 15 Replies View RelatedI had an issue with my computer so I re-installed Windows 7, but now my sound won't work =/ On the keyboard there is a shortcut to raise the volume or decrease the volume and a green bar used to pop up to show what percentage my sound was at and now that won't even show up. I went into properties and it says my device is installed properly ..
View 14 Replies View RelatedI upgraded from Windows XP to Windows 7 and now my Sound Card and Network Adapter don't work. On Device manager is telling me there are no drivers for these. I went to Dell Support and downloaded drivers for them and still they don't work. amva55 has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 7 Replies View RelatedI have an old Sound Blaster Live!card for XP..Will it work in Windows 7 as the newer Sound Blaster x-Fi Xtreme Audio card that came on my new computer does not have a stereo mix that enables you to play music into a chat room like Paltalk. New system is 64 Bit.
View 3 Replies View RelatedI Installed windows 7 in my computer but My creative sound blaster not work properly only frond left & Right speaker are now working ,Center & Rear left ,Rear right speakers are not working ,(I installed this software SB51_WDRV1_LB_SB0680 Creative Technology Ltd Sound Card Win XP Home, Win XP Pro Version 1,0.0.1 FCCID: N10225) this is not working.
View 1 Replies View Relatedi need sound driver of ESS Solo-1 / ES19385 / G279 sound card .
View 2 Replies View Relatedany way to make my sound work on my compaq laptop with recent install of windows 7? Won't take drivers
View 2 Replies View RelatedI downloaded Windows 7 on my Mac and now I have no sound when I use Windows 7....
View 2 Replies View RelatedAutomatic install sound driver windows 7 driver in computer?
View 1 Replies View Relatedi have a toshoba satellite with windows 7 home version I have a couple of old 2.5 hard drives from an old IBM thinkpad that I want to get the pictures from. I bought a SATA/IDE USB cable and plugged it in after a while it loaded and i could see the drive in "my computer", and I could access all the pictures, which was great. (unfortunately I didn't copy across the pictures..). I then tried the second drive, that one hung during the loading process. however since then my laptop just doesn't see either of the drives when I plug them in. Just for clarity have only tried them one at a time and I they both power up.
View 4 Replies View RelatedMy 32 bit IE has not worked for a long time I have tried everything and finally tried turning off my add ons and it worked so I went back and tried turning them off one by one and counld not find the one that is causing the problem. Im not even sure what these add ons do im not very advanced in pcs I can just follow instructions.
View 1 Replies View RelatedI have a backup .bat that I have hobbled together from forums such as this. The original was made a few years ago. It worked flawlessly, until I brought it to windows 7. Very funny, now, it only works between 10am and midnight. This has been hell to figure out because sometimes it works and sometimes it doesn't. I know it has something to do with the context of the "set hour" or "if "%hour.." part, but I can't figure it out. Should be an easy fix for someone familiar with .bat programming. Here is the relevant part:
Code: set hour=%time:~0,2%
if "%hour:0,1%"==" "set hour=0%time:~1,1%
set folder=%date:~10,4%_%date:~4,2%_%date:~7,2%-%hour%.%time:~3,2%
set DateFolder=%date:~10,4%_%date:~4,2%_%date:7,2%
As the titel says I have a software (a messenger for textbased RPGs similar to Skype, so it is nothing illegal) I want to run twice.
Before I had Windows XP with the same software and it worked like a carm with "Run as user..." After getting a new computer which runs with Windows 7 Premium Home x64 I installed the exact same version of the software, it simply won't open another instance with the "Run as user..." command.
As it is the same software version there can't be any lock within the software to prevent multiple instances as it worked on XP before. So I assume maybe it is some setting in Windows 7 but I haven't found anything useful yet. go through using VM or anything like this just for a simple messenger
I have a lot of cd's which worked before this happened, now all of them are blank, it says on the system.Even cd-r dvd's are cd-rw.
View 7 Replies View RelatedI bought a computer second hand, and all in all it's an upgrade from my last computer, except for one thing: I can not for the world get my speakers to play any kind of 5.1 sound.
The sound drivers installed are Realtek High Definition Audio 6.0.1.6602 - but this could be a mistake on my side, as for all I know, I'm not even supposed to have them installed. I just assumed I needed the Realtek Audio Manager like I did on my last computer, to get the 5.1 sound to work, and this is probably completely wrong, heh.
So how can I get the 5.1 sound to work? What information do you need to guide me? And how do I find that information?
If the motherboard type is needed (I read somewhere else it might be) then I assume it's this: ASUSTeK Computer INC. 2A73h 1.01
When I go to the Control Panel, there is no Realtek Audio Manager there. Clicking Sound, I get the following information:
Speakers
Realtek High Definition Audio
Default Device
Clicking Configure, I only have ONE option: Stereo. No 5.1.
I really want the option to listen to sound from all my speakers (I don't even care if it's pure 5.1 sound, as long as there's music/sound coming from all the speakers I'm happy!)
I have Windows 7 ultimate installed. I used the Task scheduler one time to do a Shutdown of it set at 10pm it worked fine one night now when i set it for a different day it does not work anymore. i have the right trigger, time and date etc set correctly WTH.
View 3 Replies View RelatedI was importing Pix from my Kodak Easy Share camera. After doing that, I unplugged my USB plug, but inadvertently unplugged my Ext HD USb plug(formerly Drive F). I then removed the USB for the camera and then plugged in the HD USB plug.
My computer now showed my Camera as an external device. I uninstalled it. I turned off the computer, but still I can't access the F drive. Finding the device via Ctrl Panel doesn't help either.
In April of this year I ordered a new computer from ibuypower.com. I wasn't thrilled with its state when I received it, as the graphics card was defective and several cables were unattached. But, when I got a replacement card my games played just fine, which was my main concern.Thereafter I noticed that there was a problem whenever I tried to play sound through my browser. The sound is really muffled to the point that I can't understand anything that is being said. My normal browser is Firefox, but the same thing happens with IE and Chrome.
View 2 Replies View RelatedI updated my audio drivers as per windows update because I noticed I had some new updates. Well now my speakers are not as loud as they used to be. I really don't know a way to describe this other then that, they just do not sound like they used to. They sound like they are not reaching their maximum volume, even though the volume ( master and others ) are all the way up, maxed out. Also, my Dell and the Audio drivers come with an IDT control panel, I do not know how to set up the IDT control panel for best playback, and I do not know how to fix this issue. I am on a Dell XPS 1645 using Windows 7 Pro.
View 13 Replies View RelatedI just reinstalled windows, and tried installing the latest High def audio codec from Realtek and no matter what I do. I just cant get my sound to work. In my playback devices, it still shows the green bar moving showing that sound should be playing, but i cant hear anything. My sound was working fine last night before I reformatted so I doubt anything went wrong with my sound card. I've tried pretty much everything..uninstalling all my audio drivers, then reinstalling the realtek high definition audio ones, and whenever i try to install the AC'97 drivers, it gives me an unauthorized vebdir. I've also tried using the CD that came with my motherboard with no luck. and I have also tried the latest drivers from gigabytes website with no luck.
View 3 Replies View RelatedI'm after a list of Sound cards that people absolutely know work in Windows 7 (beta build 7000) and have drivers that support them which also are compatible with Windows 7.
List of Sound Cards and Drivers that work:
-Creative Sound Blaster Audigy 4 (Drivers Located here)
-M-Audio's Delta 1010 LT soundcard with drivers made for Vista SP1, with Windows 7's compatibility program (All Delta series may work with Vista SP1)
-Asus Xonar D2 sound card works, Recording features may not work in some with some driver software.
-Sound blaster Audigy 2 SE works with the drivers from windows update
-Soundblaster live, only with kxproject drivers. WARNING: The windows update drivers give terrible sound.