I just built a new PC and when i first installed windows it kept freezing during boot up so i decided to reinstall it. When I try to reinstall it, it gets past the point where it says installing updates when it restarts, and then it just gets stuck on a screen that says "setup is starting services".
View 10 RepliesI just finished building my first gaming rig (WoooT!) and it works (DOUBLE WOOT!) and now I have to install Windows 7. The catch is my mom's company has free copies from her work that are stored online in an FTP site. Can I access those from the BIOS or is there any other way I can get to them and install without having a running operating system on my computer? I don't have a USB of Windows or any other software and I got sold a fake copy (at least I'm pretty damn sure it is) from Ebay and I really don't want to use that.
I go out and buy another DVD of Windows 7?
Finally got assembled, everything in BIOs looks detected to the best of my knowledge. But I'm trying to get Windows 7 installed, and the boot order will not change.
Using a Gigabyte P67A-D3-B3 and an older harddrive that has Windows XP on it. I was under the impression that I could boot from the CD and just overwrite the old Windows.
But everytime I turn it on it just goes to start XP then I get a blue screen. I've changed the boot order to properly boot from cdrom first. (There is another menu accessed by F12 on gigabyte bios called boot order which doesn't seem to work either)
I tried taking the battery out after changing settings and draining it, but this brought me to a Checksum Bios Error screen where it seemed to go back to the old settings?
Im a first time builder and I finally got my system to power on but I couldnt install windows. When I have to select a drive my hdd doesnt come up. I tried refreshing and it says <<No drivers were found. Click load driver to provide a mass storage drive for installation>>. [code]
View 31 Replies View Relatedi am building a new computer and windows 7 does not see the ssd, agility 3 120gb, and will not install. i have tried swapping ports, new cables and ide and achi. the drive does show up in bios though. this is the only drive connected on a new build and fresh install .
View 5 Replies View RelatedMy computer wont install windows when I put the windows 7 disc in. I will put it in then it will tell me to press any key to continue and I press a key and then it will spin the disc for a few seconds then tell me to put in media again and press a key. I just cant figure out how to install windows on my ASRock 970 Extreme 3
View 4 Replies View RelatedI have just built a new computer -
Asus Sabertooth P67 B3
Intel i7 2600K (2nd Gen)
Seagate Barracuda 1TB 32mb cache
ATI Radeon HD 6870
Corsair 16gb DDR3 1600mHz
Thermaltake TR2 RX 650w
LG BDrom/DVDwriter
This is my first build. I have upgraded Mobo bios to 3209. I get the BSOD when I try to load Windows 7 Ultimate 64bit. [0x0000007E] I know I have probably missed something.
Just built a brand spanking new rig (specs below), and I installed windows 7 onto my SSD (No Problem!) and proceeded to install drivers, format my extra drive and start installing other software and etc. Then randomly I would get a blue screen telling me some sort of data dump message and the system would reboot normally. This persisted and I booted in safe mode a few times no problem. This morning I tried to boot and Windows 7 froze on the "starting Windows" screen, no colored orbs here. Since then I have attempted to reinstall windows onto my SSD(same freezing issue even after waiting over 40 min.), install windows on my hdd(same issue) and boot without various components(video card, cd drive etc) to no avail. I also flashed the latest BIOS via USB and have attempted boots w/o usb, intel smart connect and rapid start, and other possible solutions.
MOBO: Asrock z77 xtreme 4
CPU: Intel Ivy Bridge i5 3570k
Memory : 16gb G. Skill Ripjaw in two sticks 1600 ddr3
Cooler: Hyper 212 Evo
Drives: Crucial m4 128gb SSD
Seagate Barracuda 500gb 7200rpm
PSU: Rosewill Hive 750 Modular Gaming Power Supply
Drive: Bulk Asus DVDRW Sata drive
Case: Corsair Carbide 400r
Video Card: Gigabyte GtX 670
I have recently built my 1st PC tower and all hardware checks out fine, but windows 8 and 7 all freezed on the logo screen where the circle is spining, I had friends over to look at it and they couldnt tell what was the problem.My Specs are:Case: Xigmatek ElysimMotherboard: Asrock X79 Extream 9Ram: G Skill Trident X 32Gb (8Gb x 4) @ 2400mhzProcessor: Intel i7 3960x ExtremeCooling: Corsair i100 watercooling unitGPU: Club 3D 7970 RoyalQueenPSU: XFX Limted Pro Platinum 1000WSSD: Crucial V4 256GBHDD: Seagate 3TBDVD: LG DVD driveOnce again, all hardware checks out fine but both versions of windows won't install and all freezes on the logo screen.
View 6 Replies View Relatedmy Dell Studio XPS 1645 (laptop).
To give you some background, I purchased this machine from Dell a little over a year ago it came pre-installed with Windows 7 Premium Home Edition. Since that time the computer has been terrific (aside from running a bit too hot for my liking), and I really have experienced no performance issues.
A week ago Sunday (7/31) I was poking around my taskbar and noticed that I had some updates to install from Microsoft I always thought these were automated but apparently the service pack isnt how long that potential update was sitting there, could have been a while. Regardless, I decided to upgrade to service pack 1 and for about a week nothing dramatic happened.
However, beginning yesterday my computer started to behave a bit odd, almost as if I had a virus. My Internet stopped working, I was getting random errors when attempting to open files. I was getting absolutely pummeled with windows errors (i.e not genuine, windows has stopped working etc. etc.). I was ultimately met with a flashing white screen and computer crash. I attempted a re-start and was met with a blue screen, safe mode wouldnt work, and ultimately after a couple tries it just seemed to randomly start. On that re-start though, I was met with text at the bottom right hand of my screen that said Windows 7 Build 7601 not genuine.
Luckily I have a work PC so Ive been able to do some research online (the impacted machine behaves extremely odd when I get it started). There are TONS of posts about this windows not genuine issue but Ive been struggling identifying the same symptoms I have. Also, it looks like this is a legit result of trying to use pirated software, so I want to make sure that any fix I pursue isnt the Hey this is how you get your pirated software to work! fix but rather the known Microsoft issue these are the best next steps fix.
Thus far Ive attempted a few things (uninstalling SP1, system restore, activating windows online) and all 3 have been met with failure. Basically my computer will freeze, or go through the iteration and nothing will happen. Ive included the diagnostic below
Code: Diagnostic Report (1.9.0027.0):
-----------------------------------------
Windows Validation Data-->
Validation Code: 0x8004FE21
[Code]......
Recently completed my first computer build and am trying to install windows with a raid 0 on 2 500g HDD. I have it set up in the BIOS for 1-4 and 5-6 sata ports to RAID. When I boot from the dvd drive with the windows disk, after clicking install windows, it says: "a required cd/dvd drive device driver is missing" I figured this was a driver for the raid but i cant find it anywhere. if i select browse, there is a boot (x folder but i dont see anything in there that would help me. Do i need to download a driver to a usb stick and pull it off there? adn if yes where could i get the driver? i cant find it on the asus website.
here is my setup:
asus m5a97 LE R2.0 mobo
XFX Radeon 7870
AMD 8350 Processor
I've gathered all the parts for my new build but am not sure what order to tackle the software part. I'm confident I am able to strap it all together its only the tech stuff that scares me.
1. Strap everything together (minus graphics card)
2. Power on
3. Update bios via usb
4. Install windows 7
5. Do I update chipset and all other mobo drivers? or is windows update competent enough to do this?
6. Plug in graphics card
7. Boot up and install graphics card software.
Here's what I am working with:
P8z68 LX LGA mobo
i5 2500k
Sapphire 6850
Seagate 1tb HDD
Gskill value 1333 ram
Asus cd drive
Windows 7 Home
I am unable to install Windows 7 or XP on my new build. I own a Windows 7 Professional 64-Bit Disc and the XP Disc is from my old PC. After choosing to boot from my optical drive, I receive a Windows Boot Manager scree that tells me that Windows has encountered a problem communicating with a device connected to your computer.
Status: 0xc00000e9
I have tried the following:
- Rebooting my PC and only having my SSD connected to my MB (no beeps)
- Rebooting my PC and only having my HDD connected to my MB (no beeps)
- Trying both of my HDDs connected to my MB (no beeps)
- Having both of my HDDs disconnected. (no beeps)
- Trying to install Windows XP, but I received a similar error (no beeps)
- Changed the SATA mode in my BIOS from ACHI to IDE - (my pc then made loud, rapid, and continuous beeps)
Do I have to send my drives back for an RMA or is my MB bad? Everything is powering on, but I do not know what the problem is. Could it be my SATA 6GB/s cables?
Build:
- Motherboard: ASUS P8 Z68-V/Gen 3
- Processor: Intel i5 2500k
- Memory: G.Skill 4GB x 2 DDR3 PC12800
- Graphics Card: Nvidia GTX 560ti
- PSU: Corsair HX850
- Optical Drive: Samsung 12X S-ATA Blu Ray Drive
- SSD: Crucial M4 128 GB → SATA III → SATA 6GB/s
- HDD: WD Caviar Blue 500 GB → 16MB cache → 7200 RPM → SATA 6GB/s
My current system was upgraded to windows 7 32bit from vista 32bit (I bought the windows 7 home premium upgrade disc when it was first released). I am going to build a complete new system. Can I install windows 7 64bit from the same windows 7 disc? Or do I have to buy a new windows 7 disc? Is there a way around buying a whole new disc?
View 1 Replies View RelatedThere has, so far, been no issues with drivers for 7000 for the Acer 5920gmi that I use. To disable my touchpad I installed the Synaptics driver just to disable the touchpad.
All drivers installed during installation and on first update the rest were installed.
I just finished a new build, and ready to setup with raid0 and win7 64bit.After reading several posts in several categories, I am unsure of the correct sequence of events. I think it is - boot with windows install disk, enter bios, setup raid0, then do windows install to raid array. I will be adding the 2nd set of ssd's for raid 1 in 3-4 days, and was wondering if there was any benefit to wait on the install, set up both raid 0 and raid 1 before the windows install. The ssd's are all 128 GB, the raid0 on sata III 6 gbs ports, the raid 1 will be on the 3gbs ports.
View 1 Replies View RelatedHow to install an operating system on a new build computer?
View 4 Replies View RelatedSystem Spec:
Intel Core i5-3570k
Asus P8Z77-Pro M/b
16GB DDR3 1600MHz RAM (2x8)
2x2TB 7200RPM, 64MB cache HDD's
1x500GB 7200RPM HDD
nVidia GeForce 8800GTS
Creative SoundBlaster Xtreme Gamer sound card
Linksys WMP600N wireless PCI card
Corsair HX650 PSU
1x Blu-Ray optical drive
1x DVD optical drive
This is a new computer build that I finished a few days ago. I've updated the BIOS, set up a RAID 1 configuration through Intel Rapid Storage Technology/through the BIOS. I installed Windows 7 x64 Ultimate and have begun to migrate my programs and data over from my previous machine. This process has been paused because I am experiencing BSOD. There are two which have occurred:
0x0000001a - MEMORY_MANAGEMENT
0x00000050 - PAGE_FAULT_IN_NON_PAGED_AREA
I ran a Windows Memory Diagnostic test overnight - no problems were found. I've updated all my drivers. I have followed the BSOD posting instructions and SF Diag Tool instructions, and also googled effortlessly regarding these Stop codes.
I would like to know on my new build 120 SSD and a 3T HHD so that I can install my games with most of the files are on the HHD and the games startup with the 120 SSD with the OS installed on it?
View 8 Replies View RelatedI am currently running OS 7 Beta RC Build 7100. Were do I get this newer version, is there a big difference? And am I able to upgrade to the newer Beta?
I realize that October is fast approaching for the RTM but I plan to keep running the Beta for a couple of months past the Grand Opening.
Is it possible that all the updates that I have received equally add up to the newer build?
Just completed my first build. I have two error messages during the boot sequence that I cannot resolve. The first screen shot during boot is the Asus logo. Next is a black screen that reads: "JMicron Technologies, PCI Express to SATA Host Controller ROM V1.07.23Detecting drives; Done; No drives found"next up is another black screen that reads:[CODE]
View 9 Replies View RelatedMy company bought about 15 pieces of desktop pc from dell.I created an Windows 7 image using Dell pre-installed Win7.I have used this image to clone 14 pieces of the dektops and there was no issue.However, the last one I encountered "Windows 7 Build 7601 This copy of Windows is not genuine" when I powered on the machine. I don't even have any chance to login to windows to activate it by using its OEM Product Key. Please the screenshot as attached.
View 4 Replies View RelatedI just finished building my new PC and have an odd question. I installed Windows 7 64bit Home Premium and the system boots just fine. However, when I click on "Computer" in the start menu, W7 is only seeing my SSD and not my HDD.When I started installing W7, I was asked by the installation program on which drive I would like to install. I chose my SSD. Installation went smoothly yet it does not see that 2nd HDD. Interestingly, when I click on device manager, the 2nd HDD is listed and appears to be "working properly".
System specs:
Mobo: Intel DZ68BC
CPU: Intel i5 2500
SSD: Intel SSDSA2CW
HDD: Samsung HD103S
Both the drives are connected via SATA cables. The SSD is in a 3gb/s "SATA 0" slot, the HDD is in "SATA 1" and the optical drive is in "SATA 2".Within the BIOS, under "Configuration" --> SATA drive:
Chipset SATA is enabled
Chipset SATA mode is AHCI
SATA ports 0 / 1 / 2 not installed (?)
SATA port 3 - optical drive
SATA port 4 Samsung HDD
SATA port 5 SSD
No SATA Hot Plug Capability is enabled.The Secondary SATA is enabled in IDE mode.What am I missing here? Do I have something plugged into the wrong SATA port? Why would it be seen in device manager and in the BIOS yet not seen when I look at "My Computer"?
This is my first build and with the process of part shopping figuring out what I wanted I never though of the OS. I have a PC with a 500gb hard drive running windows but when I bought this PC I didn't get a disk. Is there any way to copy windows to my new 1tb hard drive. If not is there a way to take my current 500gb out and put it in my new PC then somehow transfer windows to the 1tb hard drive. I have always got prebuilt computers so I have never had to worry about an OS and I guess I made a big rookie mistake not leaving any room in my budget for a $100+ OS..Whoops AMD FX-8350 Vishera 4.0GHz (4.2GHz Turbo) Socket AM3+ 125W Eight-Core Desktop Processor FD8350FRHKBOX COOLER MASTER R4-S2S-124K-GP 120mm Case Fan 4 in 1 pack BIOSTAR TA990FXE AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard with UEFI BIOS SAMSUNG DVD Burner SATA Model SH-224BB - OEM PowerColor PCS+ AX7870 2GBD5-2DHPPV3E Radeon HD 7870 MYST. Edition (Tahiti LE) 2GB 256-bit GDDR5 PCI Express 3.0
View 3 Replies View RelatedI recently built a computer (for the first time) and I tried installing Windows 7 64bit on it, but it doesn't see the hard drive. The hard drive shows up just fine in the BIOS so I tried installing Linux to see if that would see it..which it did. So why would Windows 7 not see the hard drive will everything else can?
View 2 Replies View RelatedI recently built a PC for myself a few weeks ago. The specs will be pasted below after the description of my problem.
While gaming, surfing the web, or running AutoCAD, my PC just freezes up. It has happened 5-6 times and I am not sure what is going on.
I did some research and I was advised to go to ASUS's QVL for my Motherboard and check the latency and recommended speed. I followed the advised instructions but my PC froze again while playing a game.
I then tried running virus scans to see if this was the issue but I detected nothing. I ran Windows Update, but the problem still occurred.
The most significant recent change I did was upgrade my video card's drivers to NVIDIA's 296 driver. Could it be the voltage of my DDR3 Memory? It is rated at 1.5V. Below are the specs for my machine.
Operating System
MS Windows 7 64-bit SP1
CPU
[Code]......
After installing a fresh Windows 7, I would optimize it doing the steps of those guides: Speed Up Windows 7 - Ultimate Guide To Make Windows 7 Blazing Fast!!! (17 steps) Master Tutorial to Make Your Windows 7 Super Fast - Tweaking with Vishal (7 steps)
Instead of doing this manually, I would use a .REG (and/or .BAT) file.
So, for those steps below:
1. Disabling the Search Indexing Feature in Windows 7.
2. Disable the Aero Theme on Windows 7.
3. Disable all Visual Effects (Sys. Properties > Advanced > Performance > Settings > Visual Effects)
4. Disable the User account control (UAC).
5. Disable the Windows 7 Sidebar.
6. Disable the Aero Peek and Aero Snap features in Windows 7.
7. Change the Power Plan To Maximum Performance.
8. Disable the Thumbnail Preview Feature.
9. Disable all System Sounds (run > mmsys.cpl).
Question A. What are the Windows 7 registry branches storing those settings?
Question B. Which Windows 7 registry tool localize those branches? Comparing the registry before and after manually doing one of those step. Registry Monitor- Askkids.com regshot | Get regshot at SourceForge.net Splunk | IT Search for Log Management, Operations, Security and Compliance
i have just built my computer it has the following:
NVIDIA GTX 550TI,
H61M-D2-B3 MOTHER BOARD
INTEL 3I 2120 CHIP
500GB SATA II WESTAN DIGITAL 16MG 7200G/S wd5000aakx
8GB RAM
lg gh24ns90 dvd rewriter
the problem is that im trying to install windows 7 onto the computer using a windows 7 disk but when the page asking me what to save the installation to, the partition list is blank. and it says that i need to install the drivers im guessing my hdd should come up on the list but it doesnt in both custom install and the advanced install, my hdd comes up on BIOS as fully working i have tried installing drivers for my motherboard during install page but it doesnt notice the install disc which came with the mother board, i have also downloaded a new driver for the motherboard on a different disk but the same thing comes up
I had purchased a retail copy of windows 7 home 32 bit and installed it as bootcamp on my macbook pro. Now I am purchasing the parts to build a desktop! Is there anyway I can transfer the windows 7 on my mac to my new pc, since I don't need windows on my mac anymore? I still have the disk and original code if that helps.
View 1 Replies View Related2 days ago this appeared on my desktop and although I can still use my computer the desktop background is black and in the bottom right corner it says Windows 7 build 7600 is not genuine. I dint get any product key from the dealer. when i bought the laptop it said windows is activated and it is genuine.
[code]...
Can i only use the OEM cd version for a custom build? or can i use the cd that says upgrade? what's the difference?
View 4 Replies View Related