Windows 7 Installation On A Build?
Mar 10, 2011Can i only use the OEM cd version for a custom build? or can i use the cd that says upgrade? what's the difference?
View 4 Replies
ADVERTISEMENT
Windows 7 Installation Freezes On New Build
Aug 11, 2010My Windows 7 installation freezes every time at the "starting windows" screen right after the little orbs come together to form the windows logo. I have let it sit there for hours and nothing changes. I am doing a fresh installation on a new build.
It seems I have literally tired everything to get this to work (changing bios settings, unplugging unessential usb connections, etc.). When I boot in safe mode the installation gets further along to the "windows is configuring your computer for first time use" but eventually just leads to an error saying that setup cannot finish in safe mode and requires a reboot.
My guess is that maybe this is some sort of driver issue? I have no way of installing any drivers though if I cant even get the OS to install. I am getting extremely frustrated with this and I am amazed that its not working.
specs:
motherboard: msi p55m-gd41
graphics card: Nvidia GTS 250 512MB
2 x 1GB DDR3
Intel i3 530
250GB Maxtor HD
New Build, Windows 7 Won't Recognize Hard Drive In Installation
Nov 28, 2012I have just finished my first build and everything was going fine until I tried to install Windows 7. I got through the first couple menus, then when I get to the part where I have to save the OS in a storage device, it does not detect my hard drive.
Specs:
Gigabyte Intel GA Z77X-U3H
Intel core i5 2500k
WD Caviar Black 1TB SATA 3 7200 rpm
Btw the HDD appears in the Bios.
Black Screen After Windows 7 Beta X64 Build 7600 Installation
Jul 28, 2009I'm installing Windows 7 Beta x64 Build 7600 with a 4.7GB DVD but once it gets to the 'finishing installation' part it seemingly reboots (I think?) to continue with the install but the thing is at this point in time for me the screen goes blank and all I see is the cursor which I can move around. If I power it off and then turn it back on the loading screen comes up but when I get to the log on screen the same thing happens again.
The exact same thing happens to me with Vista. I installed it like three times (the difference is on Vista it gets past the install but still won't get past the logon screen so I can never shut down, restarting is fine though for some reason) and I'm being forced to roll back to 64-bit XP which to be honest I really don't want. So far I've detected that it's not the DVDs. It might be the RAM but I replaced both temporarily and that didn't work either.
New Build ISO Installation
Dec 26, 2011I've just finished my first build ever, up till now it's gone really smoothly. The only problem I have is when trying to boot the OS. Basically I downloaded the windows 7 ISO file through my University (which is currently 300 miles away and closed so I can't ask for discs) and burnt it to a DVD. When I try to boot off of the DVD I get to the "Insert boot media in selected boot device and press a key" screen, but when I insert the DVD and press a nothing happens. Well not quite nothing, it skips to the next line and repeats the previous message again as if there's nothing in the drive.So far I've checked all the boot orders, RAID status and checked whether the drive is properly connected by inserting the support DVD for my mobo. I don't have, sadly, a USB stick with a high enough capacity, nor an external HDD to connect instead. I can't use my previous HDD from my old computer as it's an iMac.
View 14 Replies View RelatedBuild 7100 Installation Error
Jul 6, 2009after installing windows 7 rc on my laptop i decided to try and install it on my desktop pc running windows vista home premium 32-bit
when installing it on one user account i get the error message "D:SourcesInput.dll is either not designed to run on windows or it contains an error. try installing the program again using the original installation media or contact your system administrator or the software vendor for suuport."
then i pess "ok" and another errore message comes up:
"Windows could not load required file WinSetup.dll. The file may be corrupt to install windows, restart the installation. Error code: 0xC1.
Wheni try to install it on a different user account i receive anither error message
"Windows was unable to create a required installation folder. error code: 0x80070017"
New Build Randomly Reboots After ~5 Mins During OS Installation
Jan 23, 2012I've got my new build all setup and tried to install Windows 7 Professional 64bit. (System specs posted at bottom)
First attempt:My computer allowed me to get to drive selection and partition formatting without a selection and then shut off and proceeded to restart itself.
Second Attempt:Chose my drive, un-formatted, and got to the second step of OS installation (forgot the name i know its right after 'Copying Windows Files') and then proceeded to shut off and self restart.
Third attempt:Same as first attempt.
I've done more attempts but they have all ended just like my first and second attempt. I've tried taking out a few sticks of memory to check for bad memory (all tested working), installing on different drives to check for a bad drive (both tested working), updated the BIOS, lowering speed on memory, formatting both drives, and stripped my motherboard to where only the necessities were present in order to run the machine. The results have all been the same, looping random crashes and self restarts during the OS installation. Have even tried installing Windows 7 Home Premium 64bit. Same results.
System Specs:
Motherboard - ASRock P67 Fatal1ty Professional Series
CPU - Intel i7-2600k 3.4ghz (liquid cooled, sits at 32 C)
Memory - G.Skill Ripjaw X DDR3 1866 (4x4gb)
Video Card - Sapphire Radeon 6970 2gb
SSD - OCZ Vertex3 120gb (OS installation drive)
HDD - Western Digital Caviar Green 1.5TB 6.0gb/s 7200 RPM
PSU - Corsair Enthusiast series TX750w V2 (single rail)
New Computer Build Work With Old Build's Windows 7 Disc?
Jul 5, 2011My current system was upgraded to windows 7 32bit from vista 32bit (I bought the windows 7 home premium upgrade disc when it was first released). I am going to build a complete new system. Can I install windows 7 64bit from the same windows 7 disc? Or do I have to buy a new windows 7 disc? Is there a way around buying a whole new disc?
View 1 Replies View RelatedUpgrade From Build 7100 To Build 7264
Aug 2, 2009I am currently running OS 7 Beta RC Build 7100. Were do I get this newer version, is there a big difference? And am I able to upgrade to the newer Beta?
I realize that October is fast approaching for the RTM but I plan to keep running the Beta for a couple of months past the Grand Opening.
Is it possible that all the updates that I have received equally add up to the newer build?
Installation Hangs At Start Of Windows 7 Installation
Jun 2, 2011I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies View RelatedWindows 7 Installation - Computer Shuts Off During Installation?
Jun 29, 2011I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies View RelatedAsus P9x79 Ssd Installation With New Installation Of Windows 7 Pro?
May 16, 2012So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
Windows 7 Build 760?
Jan 15, 2013My company bought about 15 pieces of desktop pc from dell.I created an Windows 7 image using Dell pre-installed Win7.I have used this image to clone 14 pieces of the dektops and there was no issue.However, the last one I encountered "Windows 7 Build 7601 This copy of Windows is not genuine" when I powered on the machine. I don't even have any chance to login to windows to activate it by using its OEM Product Key. Please the screenshot as attached.
View 4 Replies View RelatedNew Build - 2nd HDD Not Seen By Windows 7
Dec 30, 2011I just finished building my new PC and have an odd question. I installed Windows 7 64bit Home Premium and the system boots just fine. However, when I click on "Computer" in the start menu, W7 is only seeing my SSD and not my HDD.When I started installing W7, I was asked by the installation program on which drive I would like to install. I chose my SSD. Installation went smoothly yet it does not see that 2nd HDD. Interestingly, when I click on device manager, the 2nd HDD is listed and appears to be "working properly".
System specs:
Mobo: Intel DZ68BC
CPU: Intel i5 2500
SSD: Intel SSDSA2CW
HDD: Samsung HD103S
Both the drives are connected via SATA cables. The SSD is in a 3gb/s "SATA 0" slot, the HDD is in "SATA 1" and the optical drive is in "SATA 2".Within the BIOS, under "Configuration" --> SATA drive:
Chipset SATA is enabled
Chipset SATA mode is AHCI
SATA ports 0 / 1 / 2 not installed (?)
SATA port 3 - optical drive
SATA port 4 Samsung HDD
SATA port 5 SSD
No SATA Hot Plug Capability is enabled.The Secondary SATA is enabled in IDE mode.What am I missing here? Do I have something plugged into the wrong SATA port? Why would it be seen in device manager and in the BIOS yet not seen when I look at "My Computer"?
How To Get Windows 7 On To PC Build
Feb 2, 2013This is my first build and with the process of part shopping figuring out what I wanted I never though of the OS. I have a PC with a 500gb hard drive running windows but when I bought this PC I didn't get a disk. Is there any way to copy windows to my new 1tb hard drive. If not is there a way to take my current 500gb out and put it in my new PC then somehow transfer windows to the 1tb hard drive. I have always got prebuilt computers so I have never had to worry about an OS and I guess I made a big rookie mistake not leaving any room in my budget for a $100+ OS..Whoops AMD FX-8350 Vishera 4.0GHz (4.2GHz Turbo) Socket AM3+ 125W Eight-Core Desktop Processor FD8350FRHKBOX COOLER MASTER R4-S2S-124K-GP 120mm Case Fan 4 in 1 pack BIOSTAR TA990FXE AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard with UEFI BIOS SAMSUNG DVD Burner SATA Model SH-224BB - OEM PowerColor PCS+ AX7870 2GBD5-2DHPPV3E Radeon HD 7870 MYST. Edition (Tahiti LE) 2GB 256-bit GDDR5 PCI Express 3.0
View 3 Replies View RelatedWindows 7 Doesn't See Hdd On New Build?
Oct 22, 2011I recently built a computer (for the first time) and I tried installing Windows 7 64bit on it, but it doesn't see the hard drive. The hard drive shows up just fine in the BIOS so I tried installing Linux to see if that would see it..which it did. So why would Windows 7 not see the hard drive will everything else can?
View 2 Replies View RelatedWindows Keeps Freezing While Using New Build
Mar 18, 2012I recently built a PC for myself a few weeks ago. The specs will be pasted below after the description of my problem.
While gaming, surfing the web, or running AutoCAD, my PC just freezes up. It has happened 5-6 times and I am not sure what is going on.
I did some research and I was advised to go to ASUS's QVL for my Motherboard and check the latency and recommended speed. I followed the advised instructions but my PC froze again while playing a game.
I then tried running virus scans to see if this was the issue but I detected nothing. I ran Windows Update, but the problem still occurred.
The most significant recent change I did was upgrade my video card's drivers to NVIDIA's 296 driver. Could it be the voltage of my DDR3 Memory? It is rated at 1.5V. Below are the specs for my machine.
Operating System
MS Windows 7 64-bit SP1
CPU
[Code]......
How To Build A .REG To Optimize Windows 7
Apr 11, 2010After installing a fresh Windows 7, I would optimize it doing the steps of those guides: Speed Up Windows 7 - Ultimate Guide To Make Windows 7 Blazing Fast!!! (17 steps) Master Tutorial to Make Your Windows 7 Super Fast - Tweaking with Vishal (7 steps)
Instead of doing this manually, I would use a .REG (and/or .BAT) file.
So, for those steps below:
1. Disabling the Search Indexing Feature in Windows 7.
2. Disable the Aero Theme on Windows 7.
3. Disable all Visual Effects (Sys. Properties > Advanced > Performance > Settings > Visual Effects)
4. Disable the User account control (UAC).
5. Disable the Windows 7 Sidebar.
6. Disable the Aero Peek and Aero Snap features in Windows 7.
7. Change the Power Plan To Maximum Performance.
8. Disable the Thumbnail Preview Feature.
9. Disable all System Sounds (run > mmsys.cpl).
Question A. What are the Windows 7 registry branches storing those settings?
Question B. Which Windows 7 registry tool localize those branches? Comparing the registry before and after manually doing one of those step. Registry Monitor- Askkids.com regshot | Get regshot at SourceForge.net Splunk | IT Search for Log Management, Operations, Security and Compliance
Windows 7 Not Installing On A New Build?
Apr 1, 2012i have just built my computer it has the following:
NVIDIA GTX 550TI,
H61M-D2-B3 MOTHER BOARD
INTEL 3I 2120 CHIP
500GB SATA II WESTAN DIGITAL 16MG 7200G/S wd5000aakx
8GB RAM
lg gh24ns90 dvd rewriter
the problem is that im trying to install windows 7 onto the computer using a windows 7 disk but when the page asking me what to save the installation to, the partition list is blank. and it says that i need to install the drivers im guessing my hdd should come up on the list but it doesnt in both custom install and the advanced install, my hdd comes up on BIOS as fully working i have tried installing drivers for my motherboard during install page but it doesnt notice the install disc which came with the mother board, i have also downloaded a new driver for the motherboard on a different disk but the same thing comes up
Transferring Windows 7 From Mac To New Build?
Aug 16, 2012I had purchased a retail copy of windows 7 home 32 bit and installed it as bootcamp on my macbook pro. Now I am purchasing the parts to build a desktop! Is there anyway I can transfer the windows 7 on my mac to my new pc, since I don't need windows on my mac anymore? I still have the disk and original code if that helps.
View 1 Replies View RelatedWindows 7 Build 7600?
Dec 28, 20122 days ago this appeared on my desktop and although I can still use my computer the desktop background is black and in the bottom right corner it says Windows 7 build 7600 is not genuine. I dint get any product key from the dealer. when i bought the laptop it said windows is activated and it is genuine.
[code]...
Install Windows 7 To A New Build Without The DVD?
Jun 24, 2011I just finished building my first gaming rig (WoooT!) and it works (DOUBLE WOOT!) and now I have to install Windows 7. The catch is my mom's company has free copies from her work that are stored online in an FTP site. Can I access those from the BIOS or is there any other way I can get to them and install without having a running operating system on my computer? I don't have a USB of Windows or any other software and I got sold a fake copy (at least I'm pretty damn sure it is) from Ebay and I really don't want to use that.
I go out and buy another DVD of Windows 7?
Windows 7 Install On Build With Old HD
Nov 22, 2011Finally got assembled, everything in BIOs looks detected to the best of my knowledge. But I'm trying to get Windows 7 installed, and the boot order will not change.
Using a Gigabyte P67A-D3-B3 and an older harddrive that has Windows XP on it. I was under the impression that I could boot from the CD and just overwrite the old Windows.
But everytime I turn it on it just goes to start XP then I get a blue screen. I've changed the boot order to properly boot from cdrom first. (There is another menu accessed by F12 on gigabyte bios called boot order which doesn't seem to work either)
I tried taking the battery out after changing settings and draining it, but this brought me to a Checksum Bios Error screen where it seemed to go back to the old settings?
Windows 7 Upgrade On New SSD / HDD Build
Feb 10, 2012I have a couple of questions pertaining to my new pc build that is being shipped to me. I am building a new computer using a Corsair Force GT 120gb SSD as my boot drive and a Seagate Barracuda 1tb drive for files and whatever else.When installing the SSD (my EVGA Z68 SLI has SATA 3) is there anything special I need to do? I assume there isn't, other than just plug it into the SATA 3 port and go. Now, once the computer is up and running, what must I do to get windows to install on it? I have read about changing from IDE to AHCI (not sure if my BIOS will have that or not but I will find out soon). Is there anything else? I also read that changing the boot priority to dvd rom first, SSD second, then the HDD third will help as well. Both drives are brand new so no partitions or anything, clean install. Second part, I bought the upgrade version of Windows 7 professional 64 bit and to install it, can I just pull out my old retail copy of Windows XP and install that first, then once it gets me to the desktop, reboot and do it all over again, this time installing the Windows 7 upgrade over it? In theory, I imagine this is how I would have to do it, but I am not positive so that is why I am inquiring.
View 5 Replies View RelatedWindows 7 Keeps Freezing While Using New Build?
Mar 19, 2012I recently built a PC for myself a few weeks ago.The specs will be pasted below after the description of my problem.While gaming, surfing the web, or running AutoCAD, my PC just freezes up.It has happened 5-6 times and I am not sure what is going on.I did some research and I was advised to go to ASUS's QVL for my Motherboard and check the latency and recommended speed.I followed the advised instructions but my PC froze again while playing a game.I then tried running virus scans to see if this was the issue but I detected nothing.I ran Windows Update, but the problem still occurred.The most significant recent change I did was upgrade my video card's drivers to NVIDIA's 296 driver.Could it be the voltage of my DDR3 Memory?It is rated at 1.5V.Below are the specs for my machine.
Operating System
MS Windows 7 64-bit SP1
CPU
Intel Core i5 2500K @ 3.30GHz42 °C
Sandy Bridge 32nm Technology
RAM
[code]...
Can't Install Windows 7 On 1st Build
Apr 19, 2012Im a first time builder and I finally got my system to power on but I couldnt install windows. When I have to select a drive my hdd doesnt come up. I tried refreshing and it says <<No drivers were found. Click load driver to provide a mass storage drive for installation>>. [code]
View 31 Replies View RelatedWindows 7 Does Not See Ssd On New Build And Will Not Install
May 2, 2012i am building a new computer and windows 7 does not see the ssd, agility 3 120gb, and will not install. i have tried swapping ports, new cables and ide and achi. the drive does show up in bios though. this is the only drive connected on a new build and fresh install .
View 5 Replies View RelatedInstalling Windows 7 On New Build
May 19, 2012I finished building a new computer today and everything was working fine, but when I select the custom/new installation of Windows 7, it brings me to a screen that claims Disk 0 Partition 1 is 2048 GB and OEM reserved. I've never done this before, so it's entirely possible that I'm missing something obvious, but given that the hard drive is only 1.5 TB it seems like something has to be wrong here. Is there a way for me to either safely delete that entire partition or to partition it into something I could actually install to?
View 4 Replies View RelatedInstalling Windows 7 On New Build
May 22, 2012I just finished building my first computer and I plan on using my HDTV as a monitor. The problem is that windows 7 is having trouble installing.
Whenever it boots is goes through the loading page and the "starting windows" page but when it gets to the choosing language, country, etc.screen it freezes and my keyboard and mouse are none responsive.I can enter the BIOS just fine and my keyboard and mouse work there.I think the problem might be related to resolution as I am using my HDTV. But I don't know why it would wait until that spot to stop working. Plus, I don't have a monitor to connect it to to fix the resolution. [code]
Windows 7 Won't Install On New Build
Jun 15, 2012My computer wont install windows when I put the windows 7 disc in. I will put it in then it will tell me to press any key to continue and I press a key and then it will spin the disc for a few seconds then tell me to put in media again and press a key. I just cant figure out how to install windows on my ASRock 970 Extreme 3
View 4 Replies View RelatedWindows 7 OEM Won't Install On New Build
Oct 21, 2012I just built a new PC and when i first installed windows it kept freezing during boot up so i decided to reinstall it. When I try to reinstall it, it gets past the point where it says installing updates when it restarts, and then it just gets stuck on a screen that says "setup is starting services".
View 10 Replies View Related