I have a 64bit windows 7 asus laptop. whether booting normally, or in safe or any other mode, it will start the boot process then freeze. elements of one or two lines of blue screen (possibly the windows background) start to appear at the top of the screen when it freezes. Could this possible be something with the Windows load page?
View 14 RepliesI have an Acer Aspire 4743g. days back my Windows 7 Ultimate got Corrupted, so I cannot start my laptop so I cleaned it(Delete then Reinstalled the OS). Then It worked..But i have noticed another problem. my laptop freezes about 2 seconds then Starts up Again.. then freezes and un froze again... Then I am hearing some clicking sound on my disk drive on the right.(where I put DVD/CD's). And my laptop is 1 Year and 1 Month old, I haven't cleaned the fan. I think it has so many dust/oil in it that may also cause's my laptop to freeze from time to time. Then after about 10 minutes the Blue Screen of Death Appears!. It's so frustrating. I tried using Check Disk but it is stuck on the 4th Stage out of 5. like around 53k. I also tried defraging it. but nothing happens. I am in Safe mode now.
View 6 Replies View RelatedUsing windows 7, machine starts fine then freezes when I try to launch an application.
View 1 Replies View RelatedIt was having problems and I reinstalled windows and it went through that process fine, but as soon as it finished configuring for the first time it froze again. It opens in safe mode fine.
View 4 Replies View RelatedOk, So I have tried to run a antivirus scan in safe mode, but it stops half way. and tried to download a new antivirus, but also when I go to Safe Mode with networking, It still wont let me connect to internet. Its like when I run normal Mode, its just starting up in regular safe mode, and same thing when I run Safe Mode w/ networking
View 2 Replies View RelatedI just built a new system today, and I have been running into some significant issues whenever I try to reboot. Basically, the system hangs up on the Starting Windows screen at the exact same instance whenever I reboot. This has been happening since I installed Windows 7 64-bit edition. After I booted and installed off of the installation DVD, it froze up on the first restart. I then tried to install Windows again. That worked, but it then again froze on the first reboot. I then had to manually shut down the pc and start it up again. Fortunately, it picked up where I left off and finished the Windows 7 install.After I installed Windows 7, I have had no problems whatsoever expect for when I restart, as the system freezes at the point specified on the image above. However, if I shut down my computer and then start it up, everything loads fine.
Here are my specs:
AMD Phenom II Black Edition dual core 3.2 ghz CPU (all four cores unlocked, overclocked at 3.8 ghz)
HIS Radeon HD 4670 GPU
BIOSTAR T A870+ mobo
Seagate Barracuda SATA 7,200 RPM 1TB HD
4 gigs G.SKILL DDR3 240-pin RAM
Windows 7 always freezes on restart, but starts up fine after shutdown
View 2 Replies View RelatedI have a HP labtop and my laptop froze all of a sudden so I did a hard restart of the computer. After restarting the computer I am no longer able to boot my computer up, the screen will go black sometimes after the log in screen. But now I do not even get the option to go to the log in screen now it just goes to the startup recovery stage. Everytime I try to fix start up I get startup repair off line following by the details of 0.00000 or something like that. The numbers are all zeros in the details but I tried other options like restoring to a previous point and I keep getting errors.
View 5 Replies View RelatedMy laptop is continuously freezing after startup. I after booting up and logging in everything will load completely then will often freeze for 10mins to upwards of 50mins, and I will eventually get a Microsoft Explorer error and everything will disappear from my screen leaving up only my wallpaper. And all attempts at bringing up the task manager will not work.
View 10 Replies View RelatedMy computer freezes many times when ill start it up and get to desktop. It wont take any commands after starting and ill have to shut it down by turning power off. It seems that when ill start my computer in safe mode and then ill restart and go back to normal mode it works normally. All these began after 2 latest updates.
View 1 Replies View RelatedI tried to do a clean start up and still freezes. I've tried to restore it to previous settings and still having problems. Sometimes it freezes when i'm logging on and if i make it past that then it usually freezes within the next 1-3 minutes.
Computer
Processor - Intel i7-260 3.4 ghz
Ram - 8GB
64 bit Windows 7
I really would like to avoid having to completely erasing my Hard Drive.
have a problem with my Toshiba Satellite Pro U400, I recently did a clean install of windows 7 home premium 32bit and when I turn it on the mouse freeze but everything els works but it doesn't unfreeze unless when I turn it off and on then it will work but the problem happens again after I turn if on and off again
View 1 Replies View Relatedbut I was given it used from the previous owner and later found out it was refurbished. It is a Gateway NV53A. I have always had issues with BSOD's and Windows errors, and most of them either driver or memory related. I fixed and updated all drivers, but never did anything about memory except maybe some tests and they all came out fine. 3 days ago, I was using my PC just browsing a Web page and suddenly the screen went black. I thought it was the lcd, but I closed the lid to see if it would go into standby mode and it just stood there powered on and frozen... The only way it would react was if I manually turned it off holding power button.
Sometimes it does boot up, sometimes it gets farther than others. What I mean is, sometimes it gets past the Gateway logo and crashes there, sometimes it boots up to to the home screen, and sometimes it doesn't even boot... How far it gets depends on how long the PC has been turned off. Odd I know... Anyways, I found out my motherboard requires ram with 1066mhz fsb whereas the current ram sticks it has installed are 800mhz.... I was told new ram with 1066mhz would fix my issues and allow my PC tu boot and run fine as it always did, but I just wanted to be sure that's my Issue, and I also wanted to know how come the computer ran fine (with the exception of BSOD's and some errors occurring every now and then) before and now suddenly I'm screwed. I'm currently using two 2GB DDR3 Ram memory sticks. The brand and model of each stick is Nanya nt2gc64b88b0ns-cg
I have a Verbatim pen drive, the capacity is 16 GB. When I start any transfer, say of a 300 Mb file, the first 200 Mb of data gets transferred at about 100 Mbps, then it freezes for at least 2-3 minutes after which the last 100 Mb will get transferred at 8 Mbps. This happens with every file. I reinstalled the USB 3.0 drivers and the pen drive is connected in a 3.0 port.
View 5 Replies View RelatedI access the safe mode boot menu by pressing f8 during start up. Once there I choose boot in safe mode, hit enter and then windows lists the drivers it is booting with. The boot continues, however once done, the computer is not in safe mode, but is in normal operating mode (i.e. there are no "safe mode" indications at the perimeter of the screen, and all apps are up and running as usual).
I am not trying to fix any problem, I just wanted to be sure safe mode was there in case I needed it. A couple of days ago I actually had a piece of malware that disabled my Avast anti-virus and was preventing me from accessing the internet, and at that time I tried to boot into safe mode and had the same problem. I restored the computer with an image I had taken when the machine was new, which resolved the malware problem, but not the safe boot problem.
Incidentally, I have looked at the registry and the safe boot entries are intact:
(HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlSafeBoot is there along with it's subkeys Mininal and Network).
I am using Avast anti virus (paid version), Libre Office, Skype, Firefox and have a HP office jet 4500 printer. The machine is an ASUS U43F with an I5 processor.
2 Days ago my desktop running windows 7 ultimate 64- bits suddenly crashed, showing nothing but a black screen a bit less than a minute after starting up a game. A few seconds later my computer automatically rebooted and the repair tool launched. After it was done I took a look at the report and all it could find that was broken was ci.dll, the same as in previously mentioned topic. I ran CHKDSK and scf /scannow after that, but they couldnt fix anything or find any bad sectors. I could not boot windows unless i disabled driver signing as well, however I never get any BSOD's. My system is also a bit slower as well, but not that slow. After looking at the previously mentioned topic i downloaded FRTS64 and ran it as well, I've attached the log. (No, I did not run the code that you warned not to use on a different system and on a different machine )I'm also experiencing the same browser issues. When i enter an invalid URL I'm being forwarded to the url... website, my ISP. Also the first two times I tried to open my browser nothing happened. I waited about 15 seconds, tried again and then it opened.
I think it might be a virus as well, im using P2P a lot as well though i havent downloaded anything weird in a long while. My last 100-ish downloads (all fansubs for 2 anime series) have all come from the same site which i trust. however i did recently download a patch for a game, but that came from a site that is also used very frequently, and i havent heard of anything similar from friends/friendly gamers who downloaded the same patch.
My lenovo laptop has been having a problem - the screen sometimes turns black for a few times and a blue screen occur after that. I usually just force the laptop off and restart it. A few days ago this happened and I switched off my laptop, and it cannot be started normally since then I can only start it in safe mode. when i try to start it normally it just freezes in a dark screen.
View 9 Replies View RelatedThe Compaq laptop with windows 7 starts up with a black screen, as soon as I start it up it will start the cooling fan but the screen does nothing but just a black screen. Before this happend, I was playing minecraft and then left it and when I came back the computer had automaticly locked, I tried to put my password in then it would not let me type, no keys would come up. I then put down the laptop lid then when I lifted it up again and it just was a black screen, I tried to startup again but still black screen.
View 3 Replies View RelatedI have tried at least 5 times installing the OS by using Recovery DVD's that I order from HP. I am able to boot from the DVD's and go through the process of Inserting Disc 1, Disc 2, and Disc 3. Once the setup is complete, I am prompted to Click Continue so that the system can restart the computer and continue the windows 7 Installation. It never even starts the installation. It gives me the following screen:
Windows Boot Manager. Windows failed to start. A recent hardware or software change might be the cause. To fix the problem: Insert Your Windows installation disc and restart your computer. Choose your language settings, and then click "Next." Click "Repair your computer." If you do not have this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible.
ENTER = Continue
ESC = Exit
If I press Enter I am greeted by another Windows Boot Manager screen.... that says "Choose an operating system to start, or press TAB to select a tool".
Troubleshooting I have done:
- I have tried to install the OS in different ways. i.e. with a formatted HDD, re-installing over error msg, swapped hard drives.
- I also inserted the "Windows 7 Repair disk" (I made the disk from my other windows 7 machine that is also 64-bit)
From there I boot it up, and it detects start up problems and tells me to click restart to fix issues. I restart and cross my fingers to only end up disappointed by the screen above. I have also checked and I do have boot from notebook HDD as my primary boot up device.
I just got a beautiful new laptop for Christmas (HP Pavilion g7 1260ca). Every time I start it up, it starts in "Windows Boot Manager" and makes me select Windows 7 as my operating system. That's annoying in it's self (why won't it just start on it's own! It's not like I'm running another operation system as well!) but what's even worse, as the text is appearing on the screen, a loud obnoxious beep sounds with each word that appears! I checked to make sure no keys are stuck, so it's not that. Once I choose Windows 7, I'm able to sign in with no problem.
View 3 Replies View RelatedI have an eMachines T5254 that has Windows 7 Home Premium on it, upgraded from Vista.
We recently located our home computers, modem and router to another room. I reconnected everything with the same cables, and it came on fine. After an automatic Systems Update it did not come back on, and now when I try to boot from either the Boot Manager or Advanced Boot Screen, at every option it loads files and then, before or during the time when the lights and logo start to appear, it turns off. I do not have the recovery disk, and in any case my DVD-RW has not worked for about a year.
I have a new DVD-RW which I am going to install, but I am uncertain if that will solve the problem. Is there any way to get to a Command prompt without Windows booting up, and at least access the hard drive that way, or am I up the well known tributary with inadequate means of propulsion?
I have Windows Pro and trying to find my way around. I cannot do a screen shot-don't know how. Here is the problem. Out of nowhere- this black screen which looks like "safe mode" pops up on start up. The name at the top is Program File (x86) Restore and Recovery- It says in the black screen- 3 lines saying basically -successful.. and then the window goes away quickl?
View 7 Replies View RelatedI've got a HP Pavilion g series laptop, which has recently, when being turned on, powering up as normal by turning the light of the power button on and lighting the screen, then quickly shutting these off again, and then continuing to turn on as normal.It hasnt been doing this for very long, I have no idea whether it is a serious problem or not as I don't know anything about computers. I must add that I don't use my laptop with the battery in; I use it with the battery out as I mostly use it plug into the mains.
View 4 Replies View RelatedI have a Toshiba L305D S5895 laptop. Hdd=250, Mem=2GB, Windows Vista upgrd to Windows 7 Hm prem 64bit. System power indicators does not light up except when both battery and AC are connected. When one of them (the Battery or the AC adapter) alone is plugged in, it does not light up. When both is plugged and I hit the switch, it starts briefly showing the Toshiba logo and then shuts down and the light goes off. I have to unplug both batt and AC and reconnect them again to get the power lights up. Battery is abt 11% charge and the AC adapter is ok when I tested it on a multimeter. I did a reset of BIOS by by pressing Switch for 30 secs before reconnecting power, but it did not help.
View 1 Replies View RelatedI've been having this problem with my laptop for a long time now its an hp pavillion dv4-4068LA. I just restored my system because it was very slow despite having tuneup utilities 2013 working on disabling start up programs. Everything was great when I restored my system until I started installing programs again including tuneup utilities and it actually did more damage than good to my start ups so I decided to permanently uninstall the program and do everything with Windows functions like msconfig and stuff. My startups are way faster now but not as good as they used to be, after 10 minutes of using my computer everything becomes really fast like the old times but I would like to have this speed right at the start up because I know it's possible.
View 1 Replies View Relatedi also found the same problem in my dell laptop studio. i installed, my laptop came with window vista , then i installed win 7 ultimate OS, after that i reinstalled win 7 pro OS. and now i am facing the same problem. i.e blank screen on start up sometimes. can any one please tell me that how should i reinstall the my first operating i.e window vista and when i bought laptop i got it without the cd of windows
View 2 Replies View Relatedmy laptop suddenly starts to go blank after a few minutes of use. I am using Windows 7 Home 64 bit. I have updated drivers and a good virus program. Nothing has changed recently.
View 1 Replies View RelatedAsus A54C-SX327S and no matter what I do whether I shutdown or hibernate it always powers back up on its own when the power in plugged in. If I unplug the power it shutsdown fine and I can plug the power back in and nothing happens, it just charges like a normal laptop.
View 3 Replies View RelatedI started with Windows 7 and when the computer reboots to install Windows XP it starts the installation process then the computer shuts off? What do I do?
View 4 Replies View RelatedI have an ASUS laptop, yesterday i left it alone for a few hours and I came back to a message saying "reselect boot device" I was able to get past that, I am not sure how but I did. Now today if I try to run my laptop in regular start up it freezes about 5 minutes later and then goes to blue screen. I can run my laptop in safe mode and safe mode with networking fine. I do not have any restore points (wasn't aware that windows 7 didn't automatically create restore points) so I can't restore back to a previous version. I can get a boot log and a cbs log. I don't know if its a hardware problem (I dropped my laptop two days ago about a foot and a half and it landed flat, no dents or anything. It worked fine after that) or if its a virus problem. I recently downloaded a new album (same day I dropped my laptop) but it worked fine after that as well.
View 5 Replies View RelatedWhen running any Video on my new Toshiba C660 laptop it continually starts and stops.
View 4 Replies View Related