I installed Windows 7 and after the Completing Installation part it rebooted like it should and then after restarting my PC gets stuck at the BIOS. All BIOS Controls do NOT work. I can't access the BIOS nor the Boot Menu.
View 9 RepliesMy Computer won't Boot windows 7 DVD to make a clean install, I did everything on bios to Boot from "DVD first" but It won't work but It works when you make the Windows 7 installation from Windows.
View 8 Replies View Relatedwhen I registered and put all the information about my computer in you all can see that which should save me some time. I've been running my Windows 7 x64 machine for about 3 weeks without problem. All of my programs are installed on the SSD and the HDD is for data files. Simple. Easy.I run dual display with no problem, 1920x1080 on the 24" LED (DVI), and extended to a 19" LCD (VGA).My dad was kind enough to buy me a 32" 1080p Insignia TV for christmas. I bought a cheap HDMI cable online, and when it came in the mail i decided I would set my computer up to have 3 monitors. (I didn't know that my graphics card only supports 2 at a time, I know this now.)So I plugged in the HDMI Cable to the TV and to the Computer. The 24" LED screen (my main one) Twitches for a moment then returns to normal, the TV comes on, and the 19" LCD goes blank. All is good except Aero magically shut off. After fiddling with the display settings and realizing i can only have two monitors at a time. I decide on the 24" and the 32" for now, but leave all three plugged in. I restart the computer in hopes of returning Aero. THe computer takes a VERY long time to start up and when it does, i'm presented with a dialog telling me that a page file has been created for me.
My page file SHOULD have been on my HDD (to keep room on my SSD, with 8GB of RAM i didnt think page file was THAT important).
I click the dialog and the page file settings open up. i go to check and make sure they are correct, but when i select the HDD from the listbox, everything stops working right. Page file dialogs go not responding. I open task manager and all looks good in processes. Start bar won't open. It looks like the computer is thrashing, but it never gets around to catching up with itself, so i shut it off and try again with the same results.Then i unplug everything but the DVI monitor, the mouse and the keyboard, and try again... same results. Tried safe mode... same results.so i shut it off and let it be for a day (i was pretty frustrated)I come back today, turn it on and it hangs forever on the 'Starting Windows' boot screen.I shut it off and figure.. I didnt have that much on there, I might as well wipe the drive and start from scratch, thats the easiest solution, so i pop in the Windows 7 x64 DVD, reboot the machine, all looks good, and i go for install, and it Hangs forever on the 'Setup is starting' screen with a spinning wheel cursor.One more time i restarted the computer without the disc booted 'normally' and it hung on the 'Starting Windows' screen for a little while, then entered CHKDSK. I let that run, and for the last 20 minutes, it's been sitting saying 'CHKDSK is verifying Usn Journal...'
I am running Windows 7 Ultimate and sharing a printer to other laptops running in the household using Vista and XP. I installed sp1 last weekend and then laptops stopped being able to print. Spent 3 hours on it yesterday and finally rolled back and things are now working again.I did notice that after sp1 my home group had been changed back to the "MSHOME" default. After changing it back to the exiting name, I could see the network printer and also edit files on any of the machines I had set access for. I also could set the print on the Vista release and my desktop with 7 would work just fine so no network issues. When I moved the printer back to 7, the Vista laptop would get an error while trying to load the drivers.
View 1 Replies View RelatedWhy does Windows 7's networking/sharing have to be infinitely more complicated than XP was? I have a computer running Windows 7 Home x64 that I call "file server". My main day-to-day machine is a laptop running Windows 7 Pro x64. There are several other computers throughout the house all running WinXP Pro (32 bit). I do a lot of video processing on my laptop, and whenever a file is done processing and ready to live on the file server, I move it over there. As soon as I do this, sharing for the computer called "file server" DIES. All shares on the machine become inaccessible, and all other machines lose access. My workaround for the time being is to simply reboot the file server, which magically restores sharing. However, this is a horrible workaround since files of all types are being accessed from that machine all day long.
View 4 Replies View RelatedI re installed audio drivers from HP but my notebook Windows 7 sound is still broken/choppy/halting especially while I'm opening another window or doing something else on or off line. how I can get smooth audio back? I run AVG & McAfee anti virus, but my machine is also slow, perhaps I have some kinds of virus, Is there a safe secure free antivirus that's trustworthy and actually works not just a sales pitch?
View 1 Replies View RelatedI've had this issue in Build 7100 X86 and X64 and 7600 X64. I've used both the Default Driver and the Driver directly from Intel. I have an Intel Mobile 4 Express graphics card.
View 9 Replies View RelatedI have the situation where a directory path has changed and I have emails that have hyperlinks to files (in the emails) that point to the old path. In my old Unix days I would have just created a link using ln command. In Windows I can create a shortcut to the old directory (which works in explorer), but the name I create has a .lnk extension. This seems to break the hyperlink.Does anyone know a way to make the old path valid so that the hyperlinks work?xample:Hyperlink points to c:ax.doc c:a is renamed c: shortcut c:a created pointing to c: off course c:a is actually c:a.lnk in Windows Hyperlink broken In my real situation the moved directory sits in the middle of a long path.
View 4 Replies View Relatedso i dont know what happened to my hard drive but it went blank, so not it real life but i have a very very old computer. Its one of em hp media center pc's from the 2007 or the 2006. my intel thingy is intel platinum 4. my windows is windows 7 and when i launch the system repair disk it does not sense my hard drive and when i dont launch a disk in the computer and i boot it it says "please insert a boot disk or press a key to boot thingy"
View 9 Replies View RelatedI am running 64bit Windows 7 on a DX58SO motherboard with the latest bios and board drivers downloaded from intel.- Windows 7 has all of the updates installed. After I installed SP1 I noticed that I had a yellow exclamation mark by the network adapters icon in the device manager applet with the error displayed as:
WAN Miniport (Netwprk Monitor) #2 This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
The drivers as identified in the properties sheet (ndistapi.sys and ndiswan.sys) are in fact located in their proper location in Windows/System32/Drivers/
I tried to uninstall the Wan Miniport to see if a restart would load the drivers but Windows would not allow it to be uninstalled. My network is working OK so what exactly does the Network Monitor do?
I'm using Foobar v1.1.11 and I am experiencing a random breaks in music playback, for a fraction of second like when you plug in a earphone jack.
I have the latest updated drivers from Realtek(check sys specs). There is no problem in playback in WMP. I am using Foobar for the past one year with the Dolby Headphones DSP, but disabling it wont help either. I do not want to switch to WMP.
I tried searching for this issue or similar but it's an unusual one and difficult to search for so I'm hoping I've not overlooked a thread that contains the issue already.
Essentially I have the retail version of Windows 7 Home Premium and everything is fine until I install the Asus Xonar D2X drivers. I've tried at least 3 versions of the drivers that I could find online. The drivers themselves work and the software installs correctly, once installed the sound works and I get the Xonar control panel.
However, once those drivers are installed most of the applications I have, Firefox, Internet Explorer, MSN, Windows Update, etc etc stop functioning properly. In order to make them function I have to set them all to run as administrator giving the UAC prompt and also meaning that some plugins etc within the apps don't function properly.
I've managed to narrow it down to just the Xonar audio drivers through a process of elimination and system restores and it is 100% reproducible.
Curiously using my motherboard's supplied soundcard works perfectly so I'm using that as a temporary work around until I can find a resolution to the problem.
My IT department pushed KB2468871 (among others) to me and it stopped my Windriver Tornado compiler / linker from working. It seemed to mess up the parameter passing so that when the linker (ld) ran there were no input files.
View 2 Replies View RelatedI use HP Probook 4530s and while Windows starts,wireless connection stuck on searching network and system stop working.Can't do anything,if I click on something cursor becomes busy and nothing happens.System has become completely unusable.When I start Windows in save mode, I get a notice "Turn on Windows Security Center service (important)".But when I click on it error message is: "Windows Security Center service can't be started".I reinstalled Windows but the problems remain the same
View 5 Replies View Relatedsound output keeps coming and going on all the formats. i have the lastest kmplayer
View 2 Replies View Relatedjust recently I had the power connection fail on an INTENSO USB3 ext drive -- as it was a 3GB drive I didn't want to lose all the data on it.Anyway I cracked open the case and it was simply a 3GB SATA Barracuda 7200 RPM normal HDD with a power and USB connector card embedded in the case.So I just removed the HDD and connected it up into a SATA slot on my desktop and it works fine as an INTERNAL drive (still fast too).Also frees up a valuable USB3 slot on my computer. (I only have 2 USB3 slots so each one is valuable).If I really want to use this as an external drive then I'd just get another SATA==>USB3 enclosure --but the disk is a bit heavy to use as a portable.
( I got the INTENSO drive for 70 EUR -- so even breaking it up it's still a bargan for a 3TB Barracuda SATA drive - whish Id' bought to or 3 of these and converted them to INTERNAL HDD's. !!).eems most of these larger external powered (not self powered) USB drives are simply normal HDD's contained in a SATA==>USB2 or USB3 container.
I've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies View RelatedI have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
View 9 Replies View RelatedI just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
View 9 Replies View RelatedSo i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies View RelatedMy Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies View RelatedI am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
What are the types of BIOS over years up to present BIOS types ? What make each BIOS unique and better then the previous ?
View 3 Replies View RelatedFirst, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
I tried to install windows7 to my computer. It didnt work. So we turn off the cd,rom.And now it doesnt do anything... like, when i try to turn it on there is no bios and nothing. I tried my computer with an otherscreen but nothing. Its just simple dark.And the turn on/off button of the internet and the screen is flashing..I have no idea what can be the porblem.
View 1 Replies View RelatedI start the computer ( equipped with Windows 7 Pro ) and try to access BIOS.I do this by pressing and holding the DEL key but Windows starts without accessing BIOS !Is there another way to do get BIOS setup ?
View 4 Replies View RelatedThis is an old HP PC I have recently upgraded from XP to Windows 7 and I have to say it has never run betterI have an ASUSTek A7N8X-LA motherboard with ver. 3.05 BIOS and an AMD Athlon™ 2600+ processorI want to upgrade to the latest BIOS that supports SSE2 instructions (for game playing purposes), however, I have run into a snag that the most recent BIOS ver 3.21 is still only XP compatible. Neither ASUS or HP are willing to provide any free support.This is somewhat frustrating as the BIOS in situ appears to be the original 2003 version. I could have easily updated this to the latest version before I upgraded the OS to Windows 7, but now it is to late.
View 1 Replies View Relatedi wanted to know i can update my win 7 and also my bios
View 7 Replies View Relatedwell I had windows XP, and I updated it on windows 7,during installation I did not formatted C disk. and installed win 7 on C disk. windows created (windows old) folder on c disk. The installation process ended succesfully. but the crach come after it. when i tried to turn on my computer, on screen, there appeared such massage: The bios could not installed, please press "g" . it seems i have no bios.
View 2 Replies View Related