I'm using Foobar v1.1.11 and I am experiencing a random breaks in music playback, for a fraction of second like when you plug in a earphone jack.
I have the latest updated drivers from Realtek(check sys specs). There is no problem in playback in WMP. I am using Foobar for the past one year with the Dolby Headphones DSP, but disabling it wont help either. I do not want to switch to WMP.
I re installed audio drivers from HP but my notebook Windows 7 sound is still broken/choppy/halting especially while I'm opening another window or doing something else on or off line. how I can get smooth audio back? I run AVG & McAfee anti virus, but my machine is also slow, perhaps I have some kinds of virus, Is there a safe secure free antivirus that's trustworthy and actually works not just a sales pitch?
View 1 Replies View RelatedI have a new HP pavilion pc with windows 7. I set up (I think) Windows Live Mail and I do receive e-mails. The problem is when I go to Windows Live Mail, I get a screen that distorts my background and the email headers are a bright blue with white letters that I can't read. when I x-out of mail the screen goes black and then restores to the normal background.
View 3 Replies View Relatedso i have a blue yeti, and i'm an online animator/voice actor. whenever i record audio on my blue yeti (or any other mic) i record about 4-6 inches from the mic, and turn the gain down enough that the audio doesn't peak as i yell or whatever. this is what you're supposed to do if you don't want your audio levels peaking and making your recording sound horrible and corrupted. however, afterwards, it means i have really quite recordings. not a problem right? now that it's recorded right, i can boost the volume of the entire clip afterwards right? wrong. i'm not an audio expert so i must be missing something. but why in gods name would the audio distort and peak after it's recorded successfully? it's all there, it's all clean audio. if i turn the volume on my speakers all the way up it sounds crystal clear! all i want to do is do that inside the computer so that when i upload it to Internet people don't have to turn their speakers so far up. but if i increase the clips volume in the computer, it distorts! it sounds awful! why?! i tried in sony acid and audacity and they both do the same thing! i can take sound effects, and recordings made by other producers and crank them up nice and loud, but mine just fall apart!
View 2 Replies View RelatedI've had this issue in Build 7100 X86 and X64 and 7600 X64. I've used both the Default Driver and the Driver directly from Intel. I have an Intel Mobile 4 Express graphics card.
View 9 Replies View RelatedI have the situation where a directory path has changed and I have emails that have hyperlinks to files (in the emails) that point to the old path. In my old Unix days I would have just created a link using ln command. In Windows I can create a shortcut to the old directory (which works in explorer), but the name I create has a .lnk extension. This seems to break the hyperlink.Does anyone know a way to make the old path valid so that the hyperlinks work?xample:Hyperlink points to c:ax.doc c:a is renamed c: shortcut c:a created pointing to c: off course c:a is actually c:a.lnk in Windows Hyperlink broken In my real situation the moved directory sits in the middle of a long path.
View 4 Replies View Relatedso i dont know what happened to my hard drive but it went blank, so not it real life but i have a very very old computer. Its one of em hp media center pc's from the 2007 or the 2006. my intel thingy is intel platinum 4. my windows is windows 7 and when i launch the system repair disk it does not sense my hard drive and when i dont launch a disk in the computer and i boot it it says "please insert a boot disk or press a key to boot thingy"
View 9 Replies View RelatedI installed Windows 7 and after the Completing Installation part it rebooted like it should and then after restarting my PC gets stuck at the BIOS. All BIOS Controls do NOT work. I can't access the BIOS nor the Boot Menu.
View 9 Replies View RelatedI am running 64bit Windows 7 on a DX58SO motherboard with the latest bios and board drivers downloaded from intel.- Windows 7 has all of the updates installed. After I installed SP1 I noticed that I had a yellow exclamation mark by the network adapters icon in the device manager applet with the error displayed as:
WAN Miniport (Netwprk Monitor) #2 This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
The drivers as identified in the properties sheet (ndistapi.sys and ndiswan.sys) are in fact located in their proper location in Windows/System32/Drivers/
I tried to uninstall the Wan Miniport to see if a restart would load the drivers but Windows would not allow it to be uninstalled. My network is working OK so what exactly does the Network Monitor do?
I tried searching for this issue or similar but it's an unusual one and difficult to search for so I'm hoping I've not overlooked a thread that contains the issue already.
Essentially I have the retail version of Windows 7 Home Premium and everything is fine until I install the Asus Xonar D2X drivers. I've tried at least 3 versions of the drivers that I could find online. The drivers themselves work and the software installs correctly, once installed the sound works and I get the Xonar control panel.
However, once those drivers are installed most of the applications I have, Firefox, Internet Explorer, MSN, Windows Update, etc etc stop functioning properly. In order to make them function I have to set them all to run as administrator giving the UAC prompt and also meaning that some plugins etc within the apps don't function properly.
I've managed to narrow it down to just the Xonar audio drivers through a process of elimination and system restores and it is 100% reproducible.
Curiously using my motherboard's supplied soundcard works perfectly so I'm using that as a temporary work around until I can find a resolution to the problem.
My IT department pushed KB2468871 (among others) to me and it stopped my Windriver Tornado compiler / linker from working. It seemed to mess up the parameter passing so that when the linker (ld) ran there were no input files.
View 2 Replies View Relatedwhen I registered and put all the information about my computer in you all can see that which should save me some time. I've been running my Windows 7 x64 machine for about 3 weeks without problem. All of my programs are installed on the SSD and the HDD is for data files. Simple. Easy.I run dual display with no problem, 1920x1080 on the 24" LED (DVI), and extended to a 19" LCD (VGA).My dad was kind enough to buy me a 32" 1080p Insignia TV for christmas. I bought a cheap HDMI cable online, and when it came in the mail i decided I would set my computer up to have 3 monitors. (I didn't know that my graphics card only supports 2 at a time, I know this now.)So I plugged in the HDMI Cable to the TV and to the Computer. The 24" LED screen (my main one) Twitches for a moment then returns to normal, the TV comes on, and the 19" LCD goes blank. All is good except Aero magically shut off. After fiddling with the display settings and realizing i can only have two monitors at a time. I decide on the 24" and the 32" for now, but leave all three plugged in. I restart the computer in hopes of returning Aero. THe computer takes a VERY long time to start up and when it does, i'm presented with a dialog telling me that a page file has been created for me.
My page file SHOULD have been on my HDD (to keep room on my SSD, with 8GB of RAM i didnt think page file was THAT important).
I click the dialog and the page file settings open up. i go to check and make sure they are correct, but when i select the HDD from the listbox, everything stops working right. Page file dialogs go not responding. I open task manager and all looks good in processes. Start bar won't open. It looks like the computer is thrashing, but it never gets around to catching up with itself, so i shut it off and try again with the same results.Then i unplug everything but the DVI monitor, the mouse and the keyboard, and try again... same results. Tried safe mode... same results.so i shut it off and let it be for a day (i was pretty frustrated)I come back today, turn it on and it hangs forever on the 'Starting Windows' boot screen.I shut it off and figure.. I didnt have that much on there, I might as well wipe the drive and start from scratch, thats the easiest solution, so i pop in the Windows 7 x64 DVD, reboot the machine, all looks good, and i go for install, and it Hangs forever on the 'Setup is starting' screen with a spinning wheel cursor.One more time i restarted the computer without the disc booted 'normally' and it hung on the 'Starting Windows' screen for a little while, then entered CHKDSK. I let that run, and for the last 20 minutes, it's been sitting saying 'CHKDSK is verifying Usn Journal...'
I use HP Probook 4530s and while Windows starts,wireless connection stuck on searching network and system stop working.Can't do anything,if I click on something cursor becomes busy and nothing happens.System has become completely unusable.When I start Windows in save mode, I get a notice "Turn on Windows Security Center service (important)".But when I click on it error message is: "Windows Security Center service can't be started".I reinstalled Windows but the problems remain the same
View 5 Replies View Relatedsound output keeps coming and going on all the formats. i have the lastest kmplayer
View 2 Replies View Relatedjust recently I had the power connection fail on an INTENSO USB3 ext drive -- as it was a 3GB drive I didn't want to lose all the data on it.Anyway I cracked open the case and it was simply a 3GB SATA Barracuda 7200 RPM normal HDD with a power and USB connector card embedded in the case.So I just removed the HDD and connected it up into a SATA slot on my desktop and it works fine as an INTERNAL drive (still fast too).Also frees up a valuable USB3 slot on my computer. (I only have 2 USB3 slots so each one is valuable).If I really want to use this as an external drive then I'd just get another SATA==>USB3 enclosure --but the disk is a bit heavy to use as a portable.
( I got the INTENSO drive for 70 EUR -- so even breaking it up it's still a bargan for a 3TB Barracuda SATA drive - whish Id' bought to or 3 of these and converted them to INTERNAL HDD's. !!).eems most of these larger external powered (not self powered) USB drives are simply normal HDD's contained in a SATA==>USB2 or USB3 container.
I am running Windows 7 Ultimate and sharing a printer to other laptops running in the household using Vista and XP. I installed sp1 last weekend and then laptops stopped being able to print. Spent 3 hours on it yesterday and finally rolled back and things are now working again.I did notice that after sp1 my home group had been changed back to the "MSHOME" default. After changing it back to the exiting name, I could see the network printer and also edit files on any of the machines I had set access for. I also could set the print on the Vista release and my desktop with 7 would work just fine so no network issues. When I moved the printer back to 7, the Vista laptop would get an error while trying to load the drivers.
View 1 Replies View RelatedWhy does Windows 7's networking/sharing have to be infinitely more complicated than XP was? I have a computer running Windows 7 Home x64 that I call "file server". My main day-to-day machine is a laptop running Windows 7 Pro x64. There are several other computers throughout the house all running WinXP Pro (32 bit). I do a lot of video processing on my laptop, and whenever a file is done processing and ready to live on the file server, I move it over there. As soon as I do this, sharing for the computer called "file server" DIES. All shares on the machine become inaccessible, and all other machines lose access. My workaround for the time being is to simply reboot the file server, which magically restores sharing. However, this is a horrible workaround since files of all types are being accessed from that machine all day long.
View 4 Replies View RelatedAbout a week ago my PC had restarted on its own when I wasn't there and was stuck on a screen saying "Reboot and Select Proper Boot device or Insert Boot media in Selected Boot device and press any key ". I manually restarted the PC but nothing was shown on the screen. I turned off the PC, disassembled it and took out the BIOS battery and left it there for about 30 minutes. I then put everything back together and booted. The PC started fine but after about one hour it crashed for no reason. Since last week sometimes it crashes or restarts either within minutes from logging into windows either within an hour but never over 2 hours. At first I though it was a power supply issue, I had a Corsair VX550W for the last 4 years and so I replaced it with a brand new Corsair TX650, this has not solved anything though. But since I replaced the PSU the PC now only restarts every 1 hour when I am logged into windows. However, at this moment I have left it open into BIOS and it is working for 2 hours without any restart.
[code]...
If I left my computer for 30mins, when I came back, it lags. While lagging, I opened Task Manager. The RAM usage its only 2.8Gb out of 8GB. If I use it for 2 mins, it back to normal...what is that?
View 4 Replies View RelatedI was planning on buying the upgrade because I need a 64 bit os. I've been told that the installation process was messy and that this was not a good choice specifically for gaming. I would be upgrading from windows xp 32 bit.
Are there any important issues that I should be aware of? Are these warnings true?
Last night I was on face book playing a game and my computer shut off for no reason.I turned it back on but it shut off again after about 10 minutes.I downloaded hijackthis but it won't seem to work for me,it dos the scan but I get a message saying,for some reason your system denied write access to the hosts file.If any highjackthis domains are in this file,hijackthis may not beable to fix this.
View 13 Replies View RelatedI thought I had this problem fixed but I guess not. My computer will randomly turn off (as if I unplugged it) at different times. I have had it done twice in the last hour I tried removing RAM in case that was the problem NO CHANGE. I bought a brand new power supply yesterday because I thought my old one was bad. It is a thermaltake 600 watts, which is more than enough to run this PC. A few days before that I got a new motherboard from the manufacturer. I am literally stumped, the only other thing I can think of is if my power switch is getting stuck. I have no idea how to replace or rewire a switch though besides getting a new case.
View 9 Replies View RelatedTo the point- specs of my comp- AMD Phenom II X2 550 (no OC), 4 Gb Memory (Kingston), Geforce GTX 260 (latest drivers), Chieftec 600W, Windows 7 Professional 64 Bit. From time to time, without any specific reason, I've got BSOD's. I realise that often (but not always) they are connected with watching films or playing games (recently for instance Diablo 3). Sometimes BDSOD's occur 5 times during one day and sometimes I have they off my head for 2 weeks. I tested my hardware with Memtest, Orthos, Prime95 and some other programs- can't remember their names- no errors at all. Here are my dumps file.
View 7 Replies View RelatedI have come across an issue lately that is kinda pissing me off. I installed iTunes in order to update my iPhone but for some unknown reason after I installed iTunes many of my executables crash for no reason. When I say crash I mean they won't even start up. The executables that crash are random each time and when I do a system restore it gets fixed till it gets messed up again. It even seems to happen after a clean installation of Windows.
View 9 Replies View Relatedim not sure what this means, but im shocked to learn that windows 7 just restarted my computer or crashed and i dont know why. can anyone help me? im using build 7077. and heres the stuff from event viewer relating to the restart.
View 4 Replies View RelatedBasically, what seems to be happening is when I'm using a program or something, like, for example, Google Chrome, the window will randomly be deselected or deactivated. It's like someone clicked on another window. Normally, this isn't a huge deal. I just click on the window and keep typing until it happens again (it usually happens two or three times then stops for a while); It's just annoying. But the real issue is when I'm playing a full-screen game, where it's constantly minimized. Not only does it take a good minute or two for my slow computer to pull the window back up, but this also sometimes crashes games, like Team Fortress 2.I haven't been able to play any games for a while.
View 9 Replies View RelatedI am using windows 7 x86 build 7600.The problem is that windows hangs and stops working now n then...It stops for some minutes and again normal performance.Mostly occurs when playing medias( VLC n Wmp) and browser (i use firefox).
View 5 Replies View RelatedI bought my little sister ''The Sims 3'' a while back and the first few weeks it was alright, until it randomly shut down with no warning. I heard a faint popping noise and the screen went black. So I turned it back on, and it started again. My sister had to play it all again.
View 5 Replies View RelatedI'm running windows 7 ultimate (x64) and well my music is really choppy at random times...and I know its not a ram issue as I have 2gb and 600mb or more is always free and my CPU is a intel celeron D 3.46 GHz with the usage at about 50% while playing music...and my music is fine because I can stream it from my Xbox fine?
View 3 Replies View RelatedMy problem is after several power outages, I noticed my computer is running slow, all my games run at 10 fps maximum, when I used to get over 70 fps, Even videos are suffer from fps drop, I tried cleaning the PC, fans are running alright. [code]
View 1 Replies View RelatedMy computer keeps o hshutting for no reason...
View 6 Replies View Related