I have a Toshiba L675D Laptop with Windows 7 Home edition and Microsoft Office 2007. When i turn on my computer first hing in the morning, my computer will not connect to the the drives located on our server. I have to restart or even shutdown and restart my computer sometimes multiple times before it will recognize the drives.
I have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server via network mapping of the server's shared folder. (In this case the mapping is Z:\pi-serverdata and the server is running 2008 R2 on a workgroup). Upon reboot, all systems but one will remap to this drive with no problem.
The one machine will always boot up with the message 'Windows could not reconnect network drives' The mapping is showing in windows explorer but there is a red 'x' icon showing the connection is lost. When I click on it, it prompts for windows credentials, which I enter and then it remaps with no problems. However upon next boot the same thing happens again. No matter what I try I cannot get the system to retain the credentials.
What I have tried so far: 1. Ensuring that there is a match of user names and passwords on the server and workstation. 2. Deleting the mapping and re-adding it. 3. Running a batch file to delay the mapping in order for windows to finish connecting the network first.
I would like to be able to browse to the network folder via network discovery through the workgroup but this particular machine does not have the server show up in the network listing (all other machines do show the server). Plus when pinging the server, it insists on responding with ipv6 unless I force a v4 ping...not sure it's relevant.
I'm using Outlook 2007 and an IMAP server through Godaddy (which I am quickly disliking after many years). I run several accounts, two of which are IMAP (the others are POP). This morning, all of a sudden, the previously retrieved messages on ONE of the IMAP accounts no longer appear in Outlook, despite being on the server -- I can see all of them via webmail. There is only one folder - the Inbox. The other IMAP account still functions normally (which is also through Godaddy), and all my saved folders that reside locally all function normally too -- none of that mail is gone as best I can tell.
I can receive new mail without issue, and send mail as well, but cannot access the old mail via Outlook. I don't get any error messages, I haven't changed any settings, and I've run Microsoft's "Outlook 2007 Inbox Repair Tool" - SCANPST on all my PST files. The tool found errors in all the files, and it repaired them, but that has not changed a thing.
if my Win 7 computer is on and connected to the router (wired), then neither my Toshiba laptop (also running Win 7) nor an iPod will reconnect after sleep.
After reading through this forum, I tried disabling the Homegroup on both Win 7 computers. Even tried disabling the IPv6 on the network adapters.
I've also made sure power remains on to the wireless adapter even when computer is asleep. And updated all my drivers, etc. turning off the wired Win 7 computer. The laptop is also showing a Microsoft Virtual WiFi Miniport Adapter #3.
Since doing a clean install of Windows 7 my internet keeps timing out. The icon in the task bar shows that it's normal, but I'll be online and after a couple minutes the internet just stops. When I click on the icon it says "connected" and "internet access."I have tried on both a Netgear and Apple router, so it's not a router issue. I reset the modem and routers a dozen times. I called my ISP and they said everything looks normal. My Droid phone works fine and so does a Macbook in the house.I have rolled back my Atheros5007 wireless card driver, which did nothing. And then tried upgrading the latest version, which did nothing. Uninstalled the driver then reinstalled, still with no luck.I was running Windows 7 fine all year and did the clean install as something I do every year to keep my computer running well.
i have a problem in win 7 on 2 different comp...on 2 dif wireless(an atheros laptop wireless and an atheros usb)i can setup an ad hoc connection with internet no problem....works like a charm but...if the server computer enters to sleep....after resume....the ad-hoc doesnt work anymore...only sais "identify.." and doesnt work anymore....need to make another new ad-hoc connection to make it workthe ad-hoc connection is saved so i can use it another time....but once disconnected i can never reconnect to make it work... i know the ad-hoc network its a temprary connection...but why bother to save it if it doesnt work afterwardsthe command << netsh wlan connect name=Profile2 ssid=SSID2 interface="Wireless Network Connection">> works smooth but its in vain if the connection is not working after reconnect..i said before its not working on s3....but not working on restart either....not even working if i disconnect the host PC and connect it again.
Have been a LONG LONG user of Linux as a server (hosting VM's XP / Windows 7 mix) and file / print sharing.
I used to avoid MS like the plague as far as SERVER environments are concerned - probably because my first experince was Windows NT (Windows NeanderThal or Windows No Thanks) which was SO HORRIBLE that it put me off Windows servers for ages.
(Note I'm using a server in a HOME environment where we have around 8 machines (most of which are actually mine for testing -- not a corporate environment which has other considerations).
The problem now with the latest Linux distros that they are trying to be "A Better Windows than Windows". You can of course customize them but I haven't got the time or patience to do this any more. To select what packages to install / leave out now is a 100% pain and if you do it wrong the chances are the system will give errors.
I've looked at the new SUSE 11.2 -- slick and polished - bit I don't NEED "an alternative Windows".
I've just been looking at Windows Server 2008 R2 (got it from Technet) and I'm REALLY IMPRESSED with it so far. I've installed the STANDARD version - you don't need datacenter or Enterprise version for a home server.
It runs vmware server on it just fine (although I might go the whole hog and use the Hyper-V virtualisation -- need to do a bit more research).
I'm quite happy letting MS do the updates than having to mess around with Kernel compiles etc.
Incidentally as a HOME server there are some considerations that you might want to do to make it more like a Desktop OS than a pure server for example add multi-media to it.
This guy does a great job at this .
Convert your Windows Server 2008 R2 to a Workstation! - Multiboot Installation
Windows 7 VM's run just fine on W2008 server (they should as there is a lot of common code).
In preparing for install of SSD I used 'Properties>Location' to relocate user library folders from the system HDD to a different HDD. After I do a clean install of Win 7 Pro to the SSD, how do I reconnect the relocated folders?
This topic was posted in Dec without a fix. I have 2 Toshiba Satellite laptops with a Realtek wireless adapter running Windows 7 64 bit. Just started having the problem about a month ago with both laptops. The adapter is disable when lid is closed. I want the computer to go to Sleep when not in use, but the adapter will not reconnect when the lid is raised and I log back in. I must manually disable and then enable the adapter (in Admin mode) to re-connect to the wireless network or reboot the computer. The computer is plugged into the power adapter. Power options are set to maximum performance. I checked all the power settings, adapter properties to automatically connect, and WLAN is the service running in automatic mode. Microsoft Answers has no answer to the problem either.
Wi-Fi does not reconnect after login / sleep / reboot. It always prompts me for the password. In "Manage Wireless Networks", it is set to "Automatically Connect". But somehow Windows "forgets" the password.
I have a wireless LAN sharing internet through a Mac Book Pro, i have no problems connecting to this with Ubuntu, an android phone, and other Apple products. The only system that i'm having problems with is the windows partition....The network is listed in available connections, but seems to have the wrong WEP key because it fails to connect. However I cannot delete the connection and start again as the network is not listed in 'Manage Wireless Networks'.
I'm stuck!! I cannot scan for updates because even when the notebook is plugged directly into the router it will not connect to the internet. I can just about get onto my neighbours WiFi network, but it is very poor strength and cuts out, so can't really use that. I know the hardware in the computer is fine because the Ubuntu partition works.
Windows 7 XPS laptop. Connects to the wireless network just fine. However, when I suspend or put the laptop into hibernation it never reconnects. I take the lpatop out of hibernation and it shows a red x through the network icon. I have to try and manually reconnect, and then I just get the spinning blue thing over the network connections without it ever reconnecting. I restart .no problem. I have a bunch of otehr PC's and devices on my home network. I have tried 2 different routers, same problem. None of the other laptops on the network have this problem. This laptop did not have this problem last month. Nothing changed. How do I start de-bugging this
I have a few computers that connect via rasdial to a bridged modem. They are dropping off randomly and frequently enough that its a pain to have to reset them manually everytime. How I could write a script or something that would check for internet connectivity and if there is none then it would re dial the pppoe connection?
I am trying to set up a home server with filezilla server. I am following this site's tutorial to help secure the data flow: [URL]. After doing all of this, I get an error saying "Invalid IP address/range/mask".
I have created 2 permanent network mappings to local drives for my phone, but I always get that "Could not reconnect all network drives" alert at logon. It's certain the phone is only occasionally connected so that the network resources are not always accessible. Is there a way how to tell Windows to remember those mappings so that I can open the associated driver whenever I connect my phone, but when not connected those drives will still exist but be inaccessible, same way as empty CD-ROM drive behaves.
I have a home network that includes an XP-based home server of sorts. I hang my Drobo off that server and share it to my home Network. On all my other PC's I access it as my "N" drive (N for network). This has worked fine through XP, Vista and even Windows 7 installations on the same PC (discussed below) for some time. But now whenever I boot up my system with Windows 7 I get the"Could not reconnect all network drives" error every time I boot. When I click on the "N:" drive through Windows Explorer or a link on the desktop W7B asks me for a userid and password. I can literally type anything in the Userid field (complete gibberish works) and add a password or not. When I do, my shared drobo connects as N: (I refer this as a manual connection for the rest of this post). Thereafter all my apps can use, see, change files on N: . All is golden until my next reboot.
It's important for me that the system automatically connect because a dozen or so of my apps routinely interact with my "N:" drive. For example I use the program Second Copy to automatically backup several directories and drives across my network to my Drobo on N:. That app won't work until N: is connected. My iTunes library is situated on my Drobo. iTunes won't see my iTunes library and gives error messages until I manually connect the N: drive and on and on and on from app to app. My N: drive is my data repository for all my devices.Here's the rub. When I first installed W7B (on the exact same PC) I installed it as an upgrade to my then current Vista x64 installation. After that upgrade, I had no problem. That N: drive auto connected on bootup just as it had when I was running Vista on the same PC and just as it had when I ran XP before on the same PC. Subsequently I chose to do a fresh W7B install on the exact same PC that I had previously installed the WB7 as a Vista x64 upgrade. That's when this problem arose.
I have NOT been able to get my shared N: Drobo drive hosted off an XP computer to automatically connect when I boot up. I have changed NOTHING on the XP server. I have changed nothing on Drobo (though I did try "Unsharing" and "Resharing" the drobo on the XP server to reset / update directory permissions - this did nothing). My other networked Vista/XP PCs continue to access it as their N: drive without incident. It is only my clean-install W7B PC (and a tablet PC I did a fresh W7B install on) that cannot automatically connect to that shared network drive on boot.What is truly strange is that on this EXACT same PC the share worked flawlessly (as always) after an upgrade from Vista x64, but when I did a fresh/clean install on the EXACT same PC, the problem raised its head.
- All PC's on my network are on the same workgroup.
- The problem persists whether or not I have a homegroup activated
- I have no problems accessing shared drives BETWEEN PCs running WB7
- I have no problem accessing the shared Drobo on the XP PC from other XP/Vista PCs
- all pcs are behind a NAT router so firewalls are turned off
- no anti virus software is running on any PC (not that anti-virus software ever caused an issue here before)
- I have tried changing most of the Advanced Sharing Settings in:
Start --> network and sharing center --> change advanced sharing settings including turning on and off 'password protected sharing'
- When I mapped my network drive to N: I did it using the proper '\serverdrobo' naming convention
- I note that when I click on the "Browse..." button my networked XP server does not show up as an available network device (though I can still connect to it by manually typing \serverdrobo
- I, of course, always check the 'Reconnect at logon' checkbox on the "Map Network Drive" dialogue box
- Whether or not I check the "Connect using different credentials' checkbox on the "Map Network Drive" dialogue box makes no difference.
- Under the 'Computer' item on the left side of Windows Explorer, the N: drive shows up (before manual connection) with a red x through it.
- I note that under the 'Network' item on the left side of Windows Explorer, only W7B PCs show up even though W7B shows all network PC's even XP PCs in the Network Map
- Clicking on the 'Remember my credentials' checkbox on the "Enter Network Password" screen when I manually connect makes no difference - WB7 clearly doesn't remember them.
- NOTE: I do NOT login with the same userid and password on the server and on my WB7 machine. I never had to before (including when WB7 on this PC was an upgrade from Vista) so I can't imagine that that is the problem. Note, all other PCs on my network access the shared Drobo from ANY userid on any other PC
Control Panel --> Network and Internet --> Network Map, (after manually connecting N: by clicking on it, that is)
The last thing I did (as mentioned in parenthesis above)(though I did try "Unsharing" and "Resharing" the drobo on the XP server to reset / update directory permissions - this did nothing)was to copy files from N: (after a manual connection) to my C: drive. When I connected that last time it asked me, as it does/did sometimes, though not always, for a userid and password. I entered the server's userid (different from my W7B's userid) and password and checked the 'remember my credentials' field, all as I had many times before). the system crashed when I was trying to do that transfer of files which lead me to reboot (pressing the power button to shut down and restart). The next time it started I didn't even notice that the N: had connected at first (I was on to a new project and wasn't paying attention to the boot process). About 15 minutes in I noticed there was no red x beside the mapped N: drive in Windows Explorer as there always had been in the past. Since I was pretty sure I hadn't done a manual connection I decided to reboot and test ... Lo and behold, N: automagically connected at boot and I don't know why. I created a save point so I can get back here if something goes awry. For now I'm just happy it works. I don't know how to replicate it. I NOTE THAT THE PROBLEM STILL SUBSISTS ON MY TABLET RUNNING W7B, so I am now confident the problem has nothing to do with how my XP server is configured. It has something to do with the way W7B is configured.
i have a 2006 acer laptop that just recently decided not to get onto the internet. it will connect to the network but no internet. i have looked at more forums than i can count but to no avail. i will try to list the problems/symptoms but i am not familiar with programming language and don't know exactly what all the command prompts are suppoed to achieve and the like.-isatap ipv6 adapter is not working (some people say it does'nt matter but???)-ip address starts with 169-ipconfig /release and release6 does not workbecause "an address has not yet been associated with the network endpoint"-ipconfig /flushdns does not work because "function failed during execution"-cannot displaydns because "dns cache is unavailable"-cannot registerdns because "rpc server is unavailable"-checked my services and found some dependant ones that i could not manually start ERROR1075: DNS client service, tcp/ip netbios helper, routing and remote access, internetconnection sharing (ics). all failed to start with the same error code 1075-ERROR 10022- netlogon service-tried "netsh int ip reset" but reset echo request failed. "access denied". i am the admin for this computer. it worked the first time i tried it with no errors. now i get the failed echo message.
-cannot setclassid "as know adapter is in a state permissable for this action"-i saw something about the dhcp-read on one forum that people were having trouble after deleting norton(symantc) programs. i have deleted norton programs and think i got all of them (how to be sure?)-netsh winsock reset successfully-tried regrepair, regseeker, and a few of those "free download" programs that say they will fix your problems after you register/purchase them. i figure if the computer can stop working so easily i can get it to start as easily. maybe that's naivety speaking.-i have scanned my cpu for viruses (naturally) with 3-4 different programs (maybe norton would have found something).clean-thought it might have something to do with the registery since i had a nasty virus everal months ago that i think changed it somehow.-of course my system restore points are dated after this problem occured.-i bought the computer at staples and it did not come with a windows startup disc.
i can't think of any more though i know i've tried more than is listed. the dns and rpc servers seem to be the main coulprits but how do i fix that? also possibly the norton issue? i've read so many forums i'm seeing triple and everyone seems to suggest the same things. i've tried them so many times (to no avail). i've even changed the network adapters ipv6 and ipv4 adresses to 208.67.222.222 with the alternate. nothing. there has to be something i'm overlooking but what
Just installed my first Windows 7 PC. It is the 64 bit ver. Works like a charm, very impressive BUT.I cannot get it to attach to our DOMAIN. It does NOT see the server.We have a windows 2003 server. 5 PCs are attached to it through a hub. Internet is through a cable router which is attached to the hub. The cable router acts as a DHCP server, and the new Windows 7 machine has an IP address within the scope.All 5 of the PCs are Win XP and have no problem attaching to the domain and the server can be seen simply by Opening Explorer then going to My Network Places.The Windows 7 PC found the Internet immediately and there is no problem surfing the web.On the Windows 7 machine it was defaulted to Home Network. When I try to change it to a DOMAIN, no matter what I do it comes back with "The Network Path was not found".I also use the wizard which tries to connect to the domain through different means and while it does come up for username and password it still rejects it in the end the same errors as above.
I also have tried all of this both with the firewall enabled and disabled. At present I have the firewall fully disabled. I've tried everything....used the workstation username, the administrator name....all the same results.Now here's the weird part, if I fiddle around enough in the network discovery window for whatever reason after a while suddenly the server and the other XP computers appear on the network. I have not been able to find out what it was that I was doing that click this or if for some reason there's something that just triggered it.However once this happens if I reboot the computer it goes back to the way it was and I have to go through this all over again clicking things and refreshing in the network window until suddenly it starts again and then I can use the network all until it might disappear at some other point.Still even when the network can be seen and the server can be seen I still cannot change from workgroup to domain.
I can ping the server by the IP number and the server name.I can paying an XP workstation by its name or IP address but only if I turn the xp workstation firewall off.Reading on some of the other forms somebody suggested to turn off the network adapter Internet protocol version 6 under the adapter properties. I did this but it didn't really have any effect that I could tell.However one thing that seem to make it easier for me to see the network was by going into the IP version 4 properties and clicking on the "use the following DNS server address" and inserting the server's IP address. I also went into the advanced settings to the DNS and insert it again the server's IP address also added under DNS suffix for this connection the name of the domain.I am completely out of ideas at this point I do not understand why I can't change to a domain name, nor why I cannot see the server without a lot of clicking and hitting the keyboard.
Every since I upgraded to Win7 Pro 64bit from Win7 Pro 32bit I have been getting "The DNS server isnot responding" error randomly and constantly (I attached the most current reports). I got rid of the Windows drivers and went straight to the Intel site for the drivers.....issue remains. Tried a complete power cycle of the router and modem....issue remains (No other computers are having the DNS issues, wired and wireless). I disabled the Bonjour Service (mDNSResponder.exe).issue remains. The is driving me nuts and I notice that the only way I can force the connection is to disable and enable the NIC
I am having issues with my wireless connections! My connection to my desktop is fine..but my wireless connection to my PS3, Iphone 4 and Hp Laptop is not working!
Provided below is the IP information..
C:UsersDCW>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : DCW-PC
I have a computer lab, where i have 12 independent pc running winxp on each, each pc has configuration as p3 733 mgz 128 mb ram, 40 gb hdd, realteck 8139 nic card ( without boot rom ) . i am sharing my singal broadband internet with a single hub, now the question is i want to use these old.pc as thin client with hd boot option, and want to buy one singal powerful latest server. i want to run win 7 on all old pc with thinclient concept.i have little knowledge about thinclient concept, never did in practical.
My computer is running a fresh installed Windows 7 premium 64-bit OS, I use a Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Network Adapter to connect to the internet. The packaging and product description states it's Windows 7 compatible, but in the last 1 1/2 weeks I've been plagued with problems relating to network connectivity and internet. My current dilemma is that the networking center shows I'm connected to the internet but when I try to load a page the web browser displays "Server not Found." Also when I try to use an internet based program such an MMO it also gives the error message Server not Found also.( Update ) In addiction, just it showed "No internet access", I troubleshot the problem and windows found no solution. Then the network center showed I had no network connections. 4 mins later it shows I'm connected to the internet again. The "Server not Found" error still persists.
I have a Server 2008 with Fax service installed and working. I cannot get either my Win 7 workstations nor my XP workstations to connect to the fax server. Both can connect to \serverfax as a printer, but neither can actually function.The Win 7 Fax & Scan says "You do not have security permissions to complete this operation" when I try to add the \server as an account. XP says something similar.
just about every time i turn my computer on i get a message that says that i couldn't connect to windows server, than i have to reset my computer a few times sometimes until it connects.
I have two computers. A desktop that has all my media and a school laptop that really doesn't have much on it. However sometimes I want to go on my laptop and listen to music. Since it has just an SSD I don't really want to load it up too much. So I would like to access that music that is on my desktop.
I would like to know how I could possibly do it. Would I have to map a network drive? Or do the shared music folder? Also how secure is it? I would be doing all this under wireless internet that is secured using WPA2-AES I believe.
I need something that can host a VPN server on Windows 7. Not LogMeIn Hamachi or the one hidden in Windows' network connections, neither of those work. I'm looking for a free program.
I would like to install windows server and manage a web site using windos tools rather than Linux. So I am trying to install IIS (Internet information services) on windows seven but when I check the installation by "localhost" in address bar, I have the following error message: Not Found HTTP Error 404. The requested resource is not found.