Reconnect One Usb Hardware To Computer?
Nov 21, 2012how i can reconnect usb hardware to my lap top?
View 1 Replies
ADVERTISEMENT
Laptop Won't Reconnect After Sleep If Wired Windows 7 Computer Is On
Nov 27, 2011if my Win 7 computer is on and connected to the router (wired), then neither my Toshiba laptop (also running Win 7) nor an iPod will reconnect after sleep.
After reading through this forum, I tried disabling the Homegroup on both Win 7 computers. Even tried disabling the IPv6 on the network adapters.
I've also made sure power remains on to the wireless adapter even when computer is asleep. And updated all my drivers, etc. turning off the wired Win 7 computer. The laptop is also showing a Microsoft Virtual WiFi Miniport Adapter #3.
Keep Having To Disconnect And Reconnect Internet?
Jan 19, 2011Since doing a clean install of Windows 7 my internet keeps timing out. The icon in the task bar shows that it's normal, but I'll be online and after a couple minutes the internet just stops. When I click on the icon it says "connected" and "internet access."I have tried on both a Netgear and Apple router, so it's not a router issue. I reset the modem and routers a dozen times. I called my ISP and they said everything looks normal. My Droid phone works fine and so does a Macbook in the house.I have rolled back my Atheros5007 wireless card driver, which did nothing. And then tried upgrading the latest version, which did nothing. Uninstalled the driver then reinstalled, still with no luck.I was running Windows 7 fine all year and did the clean install as something I do every year to keep my computer running well.
View 9 Replies View RelatedWireless Ad-hoc Not Working After Reconnect?
Dec 23, 2009i have a problem in win 7 on 2 different comp...on 2 dif wireless(an atheros laptop wireless and an atheros usb)i can setup an ad hoc connection with internet no problem....works like a charm but...if the server computer enters to sleep....after resume....the ad-hoc doesnt work anymore...only sais "identify.." and doesnt work anymore....need to make another new ad-hoc connection to make it workthe ad-hoc connection is saved so i can use it another time....but once disconnected i can never reconnect to make it work... i know the ad-hoc network its a temprary connection...but why bother to save it if it doesnt work afterwardsthe command << netsh wlan connect name=Profile2 ssid=SSID2 interface="Wireless Network Connection">> works smooth but its in vain if the connection is not working after reconnect..i said before its not working on s3....but not working on restart either....not even working if i disconnect the host PC and connect it again.
View 9 Replies View RelatedAfter Reboot I Have To Reconnect To My Wireless Network
Aug 7, 2009Every time I reboot I have to reconnect to my wireless network. Any ideas? No problems after manually reconnected.
View 0 Replies View RelatedNetwork Drives Don't Reconnect At Logon
Jan 15, 2009I'v got a problem with mapped network drives.
My configuration:
i have my pc with Windows 7 beta, anda onther old pc with windows xp. I mapped a shared folder on the xp computer ads network drive.
The problem is that even if I save my credentials, the network drive don't reconnect at logon and I have to reenter my credential again.
I have the same username on both pc, on the xp one (where are the shared folders) I have also set a password, on mine not.
Networked Drives Don't Reconnect On Reboot
May 2, 2009I have two XP machines as well as my dual-booted (XP Pro SP3/ Windows 7 RC 7100)
laptop - whenever I reboot my Windows 7 system it fails to reconnect the mapped network drives.
XP reconnects them without fail.
The only way I've found round it is to change the workgroup name, change it back and reboot - then it works.
This is VERY ANNOYING and such a basic problem - I've seen the problem all over the internet but no solutions.
Only MS could release an RC with such an obvious bug
Windows 2007 Does Not Reconnect To Server
Oct 26, 2011I have a Toshiba L675D Laptop with Windows 7 Home edition and Microsoft Office 2007. When i turn on my computer first hing in the morning, my computer will not connect to the the drives located on our server. I have to restart or even shutdown and restart my computer sometimes multiple times before it will recognize the drives.
View 1 Replies View RelatedHow To 'reconnect' Relocated User Library Files
Feb 8, 2013In preparing for install of SSD I used 'Properties>Location' to relocate user library folders from the system HDD to a different HDD. After I do a clean install of Win 7 Pro to the SSD, how do I reconnect the relocated folders?
View 5 Replies View RelatedWireless Internet Won't Reconnect When Laptop Lid Opened
Mar 20, 2011This topic was posted in Dec without a fix. I have 2 Toshiba Satellite laptops with a Realtek wireless adapter running Windows 7 64 bit. Just started having the problem about a month ago with both laptops. The adapter is disable when lid is closed. I want the computer to go to Sleep when not in use, but the adapter will not reconnect when the lid is raised and I log back in. I must manually disable and then enable the adapter (in Admin mode) to re-connect to the wireless network or reboot the computer. The computer is plugged into the power adapter. Power options are set to maximum performance. I checked all the power settings, adapter properties to automatically connect, and WLAN is the service running in automatic mode. Microsoft Answers has no answer to the problem either.
View 6 Replies View RelatedWiFi Does Not Reconnect After Login / Sleep / Reboot
Nov 19, 2011Wi-Fi does not reconnect after login / sleep / reboot. It always prompts me for the password. In "Manage Wireless Networks", it is set to "Automatically Connect". But somehow Windows "forgets" the password.
I'm running Professional x64.
Change WEP Key For Saved Network (or Delete And Reconnect)?
Jul 8, 2012I have a wireless LAN sharing internet through a Mac Book Pro, i have no problems connecting to this with Ubuntu, an android phone, and other Apple products. The only system that i'm having problems with is the windows partition....The network is listed in available connections, but seems to have the wrong WEP key because it fails to connect. However I cannot delete the connection and start again as the network is not listed in 'Manage Wireless Networks'.
I'm stuck!! I cannot scan for updates because even when the notebook is plugged directly into the router it will not connect to the internet. I can just about get onto my neighbours WiFi network, but it is very poor strength and cuts out, so can't really use that. I know the hardware in the computer is fine because the Ubuntu partition works.
Intel 1030n Does Not Reconnect To Wireless Network After Hibernation
Jun 3, 2012Windows 7 XPS laptop. Connects to the wireless network just fine. However, when I suspend or put the laptop into hibernation it never reconnects. I take the lpatop out of hibernation and it shows a red x through the network icon. I have to try and manually reconnect, and then I just get the spinning blue thing over the network connections without it ever reconnecting. I restart .no problem. I have a bunch of otehr PC's and devices on my home network. I have tried 2 different routers, same problem. None of the other laptops on the network have this problem. This laptop did not have this problem last month. Nothing changed. How do I start de-bugging this
View 7 Replies View RelatedCheck Internet Connectivity Automatically Via Script And Reconnect
Aug 22, 2012I have a few computers that connect via rasdial to a bridged modem. They are dropping off randomly and frequently enough that its a pain to have to reset them manually everytime. How I could write a script or something that would check for internet connectivity and if there is none then it would re dial the pppoe connection?
View 1 Replies View RelatedServer Shared Folder - Cannot Reconnect Mapped Drives
Aug 24, 2012I have a windows 7 pc that is part of an office network along with about 5 other machines. They are all supposed to connect to a server via network mapping of the server's shared folder. (In this case the mapping is Z:\pi-serverdata and the server is running 2008 R2 on a workgroup). Upon reboot, all systems but one will remap to this drive with no problem.
The one machine will always boot up with the message 'Windows could not reconnect network drives' The mapping is showing in windows explorer but there is a red 'x' icon showing the connection is lost. When I click on it, it prompts for windows credentials, which I enter and then it remaps with no problems. However upon next boot the same thing happens again. No matter what I try I cannot get the system to retain the credentials.
What I have tried so far:
1. Ensuring that there is a match of user names and passwords on the server and workstation.
2. Deleting the mapping and re-adding it.
3. Running a batch file to delay the mapping in order for windows to finish connecting the network first.
I would like to be able to browse to the network folder via network discovery through the workgroup but this particular machine does not have the server show up in the network listing (all other machines do show the server). Plus when pinging the server, it insists on responding with ipv6 unless I force a v4 ping...not sure it's relevant.
How To Dismiss "Could Not Reconnect All Network Drives" Alert
Jan 9, 2012I have created 2 permanent network mappings to local drives for my phone, but I always get that "Could not reconnect all network drives" alert at logon. It's certain the phone is only occasionally connected so that the network resources are not always accessible. Is there a way how to tell Windows to remember those mappings so that I can open the associated driver whenever I connect my phone, but when not connected those drives will still exist but be inaccessible, same way as empty CD-ROM drive behaves.
View 5 Replies View Related"Could Not Reconnect All Network Drives"
Feb 28, 2009I have a home network that includes an XP-based home server of sorts. I hang my Drobo off that server and share it to my home Network. On all my other PC's I access it as my "N" drive (N for network). This has worked fine through XP, Vista and even Windows 7 installations on the same PC (discussed below) for some time. But now whenever I boot up my system with Windows 7 I get the"Could not reconnect all network drives" error every time I boot. When I click on the "N:" drive through Windows Explorer or a link on the desktop W7B asks me for a userid and password. I can literally type anything in the Userid field (complete gibberish works) and add a password or not. When I do, my shared drobo connects as N: (I refer this as a manual connection for the rest of this post). Thereafter all my apps can use, see, change files on N: . All is golden until my next reboot.
It's important for me that the system automatically connect because a dozen or so of my apps routinely interact with my "N:" drive. For example I use the program Second Copy to automatically backup several directories and drives across my network to my Drobo on N:. That app won't work until N: is connected. My iTunes library is situated on my Drobo. iTunes won't see my iTunes library and gives error messages until I manually connect the N: drive and on and on and on from app to app. My N: drive is my data repository for all my devices.Here's the rub. When I first installed W7B (on the exact same PC) I installed it as an upgrade to my then current Vista x64 installation. After that upgrade, I had no problem. That N: drive auto connected on bootup just as it had when I was running Vista on the same PC and just as it had when I ran XP before on the same PC. Subsequently I chose to do a fresh W7B install on the exact same PC that I had previously installed the WB7 as a Vista x64 upgrade. That's when this problem arose.
I have NOT been able to get my shared N: Drobo drive hosted off an XP computer to automatically connect when I boot up. I have changed NOTHING on the XP server. I have changed nothing on Drobo (though I did try "Unsharing" and "Resharing" the drobo on the XP server to reset / update directory permissions - this did nothing). My other networked Vista/XP PCs continue to access it as their N: drive without incident. It is only my clean-install W7B PC (and a tablet PC I did a fresh W7B install on) that cannot automatically connect to that shared network drive on boot.What is truly strange is that on this EXACT same PC the share worked flawlessly (as always) after an upgrade from Vista x64, but when I did a fresh/clean install on the EXACT same PC, the problem raised its head.
- All PC's on my network are on the same workgroup.
- The problem persists whether or not I have a homegroup activated
- I have no problems accessing shared drives BETWEEN PCs running WB7
- I have no problem accessing the shared Drobo on the XP PC from other XP/Vista PCs
- all pcs are behind a NAT router so firewalls are turned off
- no anti virus software is running on any PC (not that anti-virus software ever caused an issue here before)
- I have tried changing most of the Advanced Sharing Settings in:
Start --> network and sharing center --> change advanced sharing settings including turning on and off 'password protected sharing'
- When I mapped my network drive to N: I did it using the proper '\serverdrobo' naming convention
- I note that when I click on the "Browse..." button my networked XP server does not show up as an available network device (though I can still connect to it by manually typing \serverdrobo
- I, of course, always check the 'Reconnect at logon' checkbox on the "Map Network Drive" dialogue box
- Whether or not I check the "Connect using different credentials' checkbox on the "Map Network Drive" dialogue box makes no difference.
- Under the 'Computer' item on the left side of Windows Explorer, the N: drive shows up (before manual connection) with a red x through it.
- I note that under the 'Network' item on the left side of Windows Explorer, only W7B PCs show up even though W7B shows all network PC's even XP PCs in the Network Map
- Clicking on the 'Remember my credentials' checkbox on the "Enter Network Password" screen when I manually connect makes no difference - WB7 clearly doesn't remember them.
- NOTE: I do NOT login with the same userid and password on the server and on my WB7 machine. I never had to before (including when WB7 on this PC was an upgrade from Vista) so I can't imagine that that is the problem. Note, all other PCs on my network access the shared Drobo from ANY userid on any other PC
Control Panel --> Network and Internet --> Network Map, (after manually connecting N: by clicking on it, that is)
The last thing I did (as mentioned in parenthesis above)(though I did try "Unsharing" and "Resharing" the drobo on the XP server to reset / update directory permissions - this did nothing)was to copy files from N: (after a manual connection) to my C: drive. When I connected that last time it asked me, as it does/did sometimes, though not always, for a userid and password. I entered the server's userid (different from my W7B's userid) and password and checked the 'remember my credentials' field, all as I had many times before). the system crashed when I was trying to do that transfer of files which lead me to reboot (pressing the power button to shut down and restart). The next time it started I didn't even notice that the N: had connected at first (I was on to a new project and wasn't paying attention to the boot process). About 15 minutes in I noticed there was no red x beside the mapped N: drive in Windows Explorer as there always had been in the past. Since I was pretty sure I hadn't done a manual connection I decided to reboot and test ... Lo and behold, N: automagically connected at boot and I don't know why. I created a save point so I can get back here if something goes awry. For now I'm just happy it works. I don't know how to replicate it. I NOTE THAT THE PROBLEM STILL SUBSISTS ON MY TABLET RUNNING W7B, so I am now confident the problem has nothing to do with how my XP server is configured. It has something to do with the way W7B is configured.
My Computer Keeps Crashing / Computer From Nikon Software Installed On Computer
Jun 7, 2011I have Windows 7. My computer keeps crashing I have written down the stop codes, which are all different each time Also keep getting nv7ddmKm.sys.I have scanned the computer with Kapersky and also malwarebytes but both scans are clean.I can be doing anything on the computer when it happens but mainly it is when i am using Adobe CS5 or uploading images onto my computer from Nikon software installed on the computer.
View 14 Replies View RelatedUnable To Take Windows 7 Home Basic Off A Store Bought Computer And Put It On Another Computer?
Feb 29, 2012I was just wondering if I am able to take windows home basic off a store bought computer and put it on another computer. The reason for this is I am currently building my own and want to avoid unnecessary cost. As I own a laptop that I will no longer be using and a retail copy(windows home premium). So can I take the windows off my old laptop and put it on the computer?
View 3 Replies View RelatedGetting This Message "Your Computer Could Not Connect To Another Console Session On The Remote Computer...?
Mar 17, 2011Very recently I started having a problem with the remote desktop where it says the following message:
"Your computer could not connect to another console session on the remote computer because you already have a console session in progress."
What I am trying to do is to access my Vista Ultimate computer using my Windows 7 Ultimate computer, and have been doing so this way for more than a year.All of a sudden I start getting the message that I have quoted. I do not know why it started doing that.As well, going in the Users tab of task manager you can see there that I am logged in as a console user.
Dell Computer PC Will Not Load Windows Install CD From Computer Crash
Jun 21, 2012I have a two year old Dell PC with Windows 7. I got a virus in my computer that by phone and computer takeover Norton located in my MBR. When they cleaned it my computer will no longer boot up. Norton worked with me for three days on the problem but we were unable to fix the computer. I followed other web sites and repaired my MBR but it still will not boot up. I tried System Repair, Check point, Image, and Dell system restore and all failed. I have tried to use the Windows install CD and all I get is a black screen with a flashing cursor and then after 3 minutes the compute attempts to boot again and fails. I tried everything to try and wipe the drive from C prompt and it will not let me. I have very weak computer skills but I can follow directions and I have wiped a previous computer I owned. (I confirmed that my CD drive is working) I also should mention I have a second hard drive on my computer that I backed everything up to.
View 1 Replies View RelatedWhen Put Computer Into Sleep Mode, The Computer Turns Off For 5 Seconds And Turn's On Alone
May 7, 2011when i put my computer into sleep mode, the computer turns off for 5 seconds and turn's on alone.
View 2 Replies View RelatedSetup A Computer On Vmware And Then Make An Image Of The Vm And Put It On A Physical Computer?
Aug 26, 2011Is there any way to setup a computer on vmware and then make an image of the vm and put it on a physical computer (multiple computers if possible)?
View 5 Replies View RelatedComputer Runs Very Slow / Computer Freezes Randomly
Mar 25, 2012Computer runs very slow. Computer freezes randomly. Does not want to boot past windows startup except for in safe mode(SOMETIMES). IF IT BOOTS takes and an incredibly long time to get to the desktop (20-45min). Does not want to run programs. Runs EXTREMELY slowly (makes a windows 95 pc look like a speed demon.) Random restarts, restart loops, and shutdowns. Sometimes after turning on it will immediately shut off then turn back on. Keeps recommending windows repair on startup. Wants to run chkdsk, then freezes on it.Malware detection programs. Hardware diagnostic programs. registry tools. disk defrags. Driver updates. Windows updates. BIOS update. System restore. Windows repair tool. Repair installation (twice). WINDOWS 7 CLEAN INSTALLATION (twice).Exactly the same as the first day it started happening. So not only did I lose all programs and files, but my pc still runs like crap. Also, this is a higher end pc under a year old. [code]
View 8 Replies View RelatedComputer Restored To Factory Settings Yet CD Drive On The Computer?
Jan 4, 2012I'm fixing my sisters computer, It froze on her, when she tried to start it up again it went into some sort of system repair mode and after about 20hrs of this (no joke) it gave me the option to restore the computer to factory settings, it also gave me the option to install some sort of backup on the hard drive, however i tried this and it said there was no room on the hard drive (if i didn't know any better I'd say the problem was with the hard drive) i went ahead with the system recovery as it seemed to be the only way to fix the computer (i know i sound like an oaf) now the computer is showing me a screen which states that i need to insert my windows installation disc, however the laptop has no disc drive!
Additional information
HP Pavilion dm1-4004sa
AMD Dual-Core E-450 processor
4GB memory
320GB Hard Drive
How To Store A Computer System Image File On Another Computer
Mar 27, 2012I m having 2 laptops at home, I want to create system image file of laptop1 onto laptop2. Since the data is large i cant take the hassle of creating sytem image on a DVD as it will require more DVD's to do it. So m planning to store it on Laptop2. I m thinking of connecting 2 Laptops with a LAN cable and then create the sytem image on other laptop.
View 4 Replies View RelatedComputer Monitor Doesn't Show Anything When Turn Computer On?
Apr 4, 2012my monitor exhibited signs of flickering during start-up, but only minor ones and would just stop at the 'Welcome' screen of windows so I didn't give it much thought. Iv'e been using it with the cpu the same time I bought the monitor.But after some time, the flickering got worse. It went from 1-2 second interval flickers to a whole 10 seconds of blackness before it showed anything.Now,Iv'e got a new cpu but still using the old monitor. After a day or so, the monitor exhibited the first symptoms of my first cpu, so I just dismissed it. But after a week, It got a hell worse, before I even start-up my computer, the monitor doesn't show Analog/Digital at the top-left corner of the screen. PLUS my cpu keeps restarting after I pushed the ON button after 10 seconds or so. Is the monitor responsible for the restart and what could be the reason for the flickering?
View 3 Replies View RelatedMove Files From Host Computer To Guest Computer
May 7, 2009How can i move files from my host computer to my guest computer?
In the VPC 2007 i could drag them from host to guest but that isn't working now, or i'm doing something wrong.
Transfer Music From A 64bit Computer To A 32bit Computer?
Nov 14, 2011how do i transfer music from a 64bit comp to a 32bit comp?
View 2 Replies View RelatedCamera Take Photos When Object Behind Computer Instead Of In Front Of Computer
Aug 29, 2012I have a dell laptop, is there anyway the camera take photos when the object is behind the computer instead of in front of the computer?
View 4 Replies View RelatedHow Can The Contents Of A Hard Drive From An Old Computer Be Transferred To New Computer
Sep 18, 2012How can the contents of a hard drive from an old computer be transferred to new computer when hard drive is out of the old computer?
View 3 Replies View Related