I have a DFI 790FX-M2RS board with 8GB OCZ ram on it. I have updated the Bios to the current and Windows 7 still sees only 4GB ram with only 3GB usable. Can anyone help as to what to change? I went to Windows 7 so that I could utilize my 8GB ram.
View 4 Repliesi just installed win7 64-bit. i have a core i5 with 8GB RAM. the computer doesn't seem to recognize all 8GB. it says there is only 4GB installed. i thought that win7 could go way beyond the 4GB limit of vista. does anyone have any suggestions on how i can get my pc to recognize and utilize all my RAM?
another thing i noticed, is that win7 seems to run my GPU (Nvidia gtx 260) hotter. its running at idle with limited apps at ~38 C compared to vista which ran at 33-35 C. anyone know why win7 runs "hotter" than vista? i thought it was supposed to be more efficient?
I bought Windows 7 Home 64bit OEM a few days ago to go along with a few other upgrades (more ram and a new video card). I installed everything before doing the OS install, but didn't bother optimizing/drivers etc. Anyway, after installing Windows 7 the computer booted up and whatnot, networking and internet worked etc...but Device Manager doesn't recognize any of my components.
Essentially it considers everything to be generic and I'm having a hell of a time getting the drivers installed. Should I just be downloading them from the manufacturers website and installing them? All I've been able to get installed are the mobo driver (not the audio, though).
The other drivers tend to fail during installation or, in the case of my video card, I get a black screen (though when I reset it back to the default generic VGA settings it works OK). System doesn't detect my sound card, disk drive brands, video card, DVD-RW player etc.
Here is my set-up. I'd appreciate some direction. I'm sure I'm missing something, but I'm not sure what.
Core2 Duo E6300 Dual Core Processor LGA775 Conroe 1.86GHZ 1066FSB 2MB Retail
Gigabyte GA-965P-S3 ATX LGA775 Conroe P965 DDR2 PCI-E16 3PCI-E1 3PCI SATA2 GBLAN Audio Motherboard
OCZ Gold XTC PC2-6400 2GB 2X1GB DDR2-800 CL5-5-5-12 240PIN DIMM Dual Channel Memory Kit (plus another 2gb from another manufacturer, but the same speeds)
Coolermaster CAC-T05 Centurion 5 Aluminum ATX Tower Case 5X5.25 1X3.5 4X3.5INT SILVER-BLACK No PS
OCZ GameXStream 700W ATX12V 24PIN SLI Ready Active PFC ATX Power Supply 120MM Fan Black
Arctic Cooling Freezer 7 Pro
Seagate Barracuda 7200 320GB SATA2 3GB/S 7200RPM 16MB Cache NCQ Hard Drive
1TB 7200 hard drive
Pioneer DVR-111D Black DVD-RW 16X6X16 DVD+RW 16X8X16 DL 8X IDE OEM DVD Burner
Sony Black 1.44MB 3.5IN Floppy Drive
Soudblaster sound card (can't remember which one, Xtreme somethingerather)
Sapphire HD 5770 1GB video card
So heres my problem: I installed Win 7 on a drive a while back and earlier today I decided that I needed more hard drive space. I saw that I had 100gb of unallocated space on the drive, but it was behind my Windows 7 partition, making it impossible to resize that partition. So I defragged with Perfect Disk 10 which moves all the files to the back of the partition, cleaned up, disabled all the usual things, ran defragger again, and then booted into a live cd of GParted. I then proceeded to move my Windows 7 partition behind the unallocated space so I could extend the volume.
Unfortunately, something went wrong and now I get the error message "Disk boot failure, please instert system disk and hit enter." So I followed the directions and ran startup repair, tried manually creating the bootmgr, and ran all the tests, but it still doesn't work. Luckily for me, I was able to reinstall Windows 7 on the unallocated space so I can at least get to the files on my other drive, which I discovered are all perfectly fine. I'm hoping this will be a quick fix since it seems like all the files are ok. What should I do so that I can boot back into that partition?
Long story short, I tried moving the partition, and something went wrong, and now I can't boot into that drive. I installed another copy of Win 7 on another partition and all the files are ok. What do I need to do to the original partition to get it to boot again?
I built a new computer. Rather expensive, but it should perform well. -Anyway-, I bought a brand new hard drive with the expectation of installing windows 7 on it and then working from there. The hard drive is recognized in the BIOS, the CMOS, and anything at all I've checked, but when I put the windows 7 64 bit disk in and try to do a custom install, seeing as I have nothing on the disk from which to upgrade, my hard drive does not show up in the section in which 7 asks where I want to install.
Motherboard is GIGABYTE GA-X58A-UD3R LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard, hard drive is Western Digital Caviar Black WD1001FALS 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive.
The hard drive is plugged into the top SATA port (It has like, 10).
What can I do?
I have XP (x86) installed on one partition.
Last night I installed Windows 7 (x64) on a separate partition.
Anytime I had tried this in the past, using Vista, it always detected the Windows XP partition, and gave me a boot menu with "Earlier Version of Windows" option to boot to.
This is not so with Windows 7.
How can I get the boot menu to show both options, to boot to XP or to Windows 7?
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
Is it possible to upgrade in place from Windows 7 32bit to Windows 7 64bit.
Is it better to do a clean new 64bit install?
I purchased the Win 7 Pro Upgrade 32bit via digitalriver, but I've been doing some reseach and probably should have selected the 64bit version.
- Any ideas how I can get the 64bit version?
- For those who ordered the 32bit back-up disc kit for the extra $15 and have received it, does it come with both 32bit & 64bit?
- I've already installed and activated the 32bit version, but when I go to install the 64bit version, will I need to / is there a way to deactivate my initial 32bit install or will this not matter?
I'm currently running 32-bit Windows 7 (Professional, full version) on my laptop, and want to use this machine to create a bootable USB drive with 64-bit Windows 7 (also Professional, full version). I tried going through the steps that are available on various tutorials online, but I'm always tripped up while attempting to use bootsect to make the drive bootable; basically I get an error saying that I need to be using a 64-bit OS.
I don't have convenient access to a computer with 64-bit Windows Vista/7 (I work at an academic institution where all pubic computers have XP or Linux), so I'm wondering if there's any way to get around this and create a bootable USB for 64-bit Windows 7 via a 32-bit OS.
I am looking for any Windows 7 Theme that includes changing the looks of any window that exemplifies the architectural look of a Mac: sharp edges, and boxy buttons, and colored scroll bars. It doesn't have to be necessarily the Mac theme, but anything around that look is acceptable.
I am fine with tweaking the explorer.exe, and some system32 files.
Any suggestions, comments and questions are always welcome.
P.S. I just got tired of the round look of any window.
I own a USB Drive ... Dane-Elec 16GB . I have a big problem with the USB on Windows 7 .
This USB have a password protect system and he need to create a virtual floppy drive so i can open the password program in order to get access to the USB .
My problem is that Windows 7 can`t install the virtual floppy drive . I have Windows Vista Ultimate SP1 as my second OS and the USB works perfect . Same on Windows XP . The only problem is here on Windows 7 . I used Windows updates to get the drivers but still not working .
By the way , if i run W. Vista and disable the password protection then in Windows 7 i can see my USB drive but i need the protection for my USB so if anyone know how to solve it please tell me .
[EDIT] Forgot to mention that i have the latest drivers for the USB even if i make the update from Device Manager i get the next message :
"Windows has determined the driver software for your device is up to date. USB FloppyDisk Drive"
Have an weird issue with Win 7 in the sense of Widescreen support.
I have an 22inch screen and run my games at the native rez of 1680 X 1050
Now the thing is older games like Project Snowblind and NFS:Most Wanted for example doesent support Widescreen as such, obviously. But in XP it seems to stretch the image and run fullscreen without any black edges on screen.
Where as in Win 7 it runs like in unstreched with Black Edges cause of the rez.
In XP even though not in Widescreen res , NFS for example I run 1280 X 1024 it runs full screen stretched, but in Win 7 it runs with the same rez and settings. But doesen't stretch image to rez.
Anyone else experience the same problem or know of a solution. I didin't do anything strange in XP, or change any settings or tweak GFX card drivers.
I tried running in XP Compatibility mode with Win 7, still the same.
I have a Nvidia GeForce 9800GTX card.
2.4 GHz single core
1gb ram
256mb video memory
Advisor says not capable of Aero. Stationary computer.
Upgrade to Windows 7 or keep XP?
I recently installed Windows 7 RC to my laptop and am facing a problem now. Sometimes when I plug in an USB Hard-drive or a ZEN MP3 player, the system does a full lock-up.
I had 7 Beta on the laptop earlier and it had no problems whatsoever. Anyone else experienced/solved similar problems or should I just go try and reinstall?
I can't decide which to go with, so I'm looking for suggestions
Only requirements: native HDMI out, since this will be a HTPC/mid gaming rig, also, keep it under $150 maybe?
Thoughts?
I'd like Direct X 11, but all the cards that do are only 128-bit..
I upgraded to windows 7 from xp and after i did that my display is not taken up the whole screen can anyone help me out.
View 6 Replies View Related1st. Can I upgrade (clean install) from either XP or Vista 32 bit system to Windows 7 64?
2nd. If the answer to 1st is yes... If the Win 7 64 bit gives too much trouble, will I be able to reinstall and go with Win 7 32 bit.
I believe the future is going to be 64 but I've never used the 64 bit and really don't know what to expect or how smooth the transition will be. Any thoughts or advice???
I downloaded Windows 7 x64 and x86. i was in dubai last week and installed the x86 on my parents PC. works like a breeze and the installation couldnt have gone smoother.
I come back to melbourne and try the install on my PC and whether I run it through my current win7beta OS or whether i boot drom cd, both thr x64 and x86 give me error 0x80070241 around the 15% installation mark. after many attempts, i thought that i was perhaps because when doing a clean install, Windows 7 doesnt let you do a full format but only a quick format.
so i got a friends PC and did a full format. x84 installed upto 50% and gave me error 0x80070570.
I need a Net.Framework 3.5 because when i install it says Error
i think its because its not for win 7 can some one give me a download because i cant find it.
I've read a lot of threads about Windows 7 servers not being able to see XP servers, but didn't see a lot of clear resolution to the issue.
Just got a new notebook with Win 7 Pro (32 bit). I cannot get it to see our office file server by name (633D). However, it can see it fine by IP address (192.168.0.103).
What should I look at first?
I Downloaded windows Windows 7 and i like it but it use so much of the ram.
I have 2 Gb of ram and i only use msn, AVG antivirus program and the internet and it use 740 mb of the ram, this is 32-bit.
if i use Windows vista ultimate 64-bit and use the same program then i use about 700-800 mb of the ram..
I know what you`re thinking: "why don`t you just go for Windows 7 x64 ?". Belive me, I did... or at least, I tried. But I was overwhelmed with BSOD's which I was unable to fix. I posted a thread *here* about the BSOD's, sadly I couldn`t get rid of them. Long story short, 2x2GB=BSOD, but 2GB=OK. Now I`m not gonna sit with a 2GB stick on my shelf. So I`m willing to give up on x64 and just go for x86 (haven`t got around to installing x86, will do that tomorrow; hope it runs ok with 2x2GB RAM installed, otherwise I`m gonna go completely crazy).
Anyway, since x86 only shows 3.25 or 3.5GB out of 4GB, I found a very interesting article about doing something about this. *This is the link* to the article. The instructions on how to tweak Windows start from the part where it says "Patch Details" (around the middle of the article). I`m not a programmer, but I read the whole article and I pretty much understood what he`s saying. I am to understand that the file NTKRNLPA.EXE needs to be modified, but how? With what am I supposed to open it? BCDEdit is used later on, so I don`t think is that I need to use at first. Basicly, I don`t understand with what to open the file.
Two days ago it used only about 600 MB of Ram when idle.
Yesterday it suddenly started using 1 GB idle and it froze a few times.
Why the sudden change? Can you help me decrease the usage?
PS If it helps, the problem started after installing G Data AV (before I used Nod32) and now I installed nod again and the usage is still the same.
I enclosed a picture from Resource Monitor in the attachments.
Explorer.exe is using 70mb. Is that normal?
I have read several times about Win 7 requiring about 400 MB RAM. I am still fiddling here (Win 7 has only been alive for a few hours), but I am using about 1,200 MB. Same as Vista.
I have not tweaked anything yet, and the Vista number was after I had turned off a lot of stuff, but still, I don't think I can get to 400 MB.
I have a window xp pro can i upgrade to window 7 32 bit?
View 11 Replies View RelatedRecently, my Quad G5 mac fried (power pc chipset) and I'm building a new Windows 7 system. I'm trying to figure out the best and fastest way to move all the data from my OS X drives (1 500 gb with files/apps, 1 1 tb with files, 1 external 1 tb with files) on to newly formatted Windows 7 drives.
Furthermore, I would like to install Win 7 on the 500 gb.
My initial thought is to boot the new, fresh system from a Linux disk and move all the files within Linux. Something like this:
In Linux:
1. Move all the files I want to keep from the 500gb on to the 1tb, then format the 500 gb for Win 7.
2. Move all files from old 1tb to new, clean 1 tb
3. Format old 1 tb
At this point, I should be ready to install Win 7 on the 500gb, and have a properly formatted 1 tb with my old files and a clean, formatted 1 tb.
I have no experience with Linux, but it is my understanding that I can mount any/all disks in Linux in order to do the file management and transfer that I need to do.
A few last thoughts...the Mac was the only only I had owned since my Apple IIc so I'm not a stranger to Windows by any means. That is to say, I'm not an overly ignorant mac user jumping in over his head. However, I have not used Windows 7 at all.
So...any thoughts?
1. Can Linux do what I think it can?
2. Is this a good idea for a workflow?
3. Do I even need Linux to do this?
How do I add a COM port to windows 7 ?
View 2 Replies View RelatedI purchased a pair of FX-7s and I'll be moving to Win7 x64 soon. I'd like to keep using them but it appears no such driver has been released by ABS. Can anyone help me locate a beta driver or something that may allow me to use them with my upgrade?
View 1 Replies View RelatedXP and win7 on the same computer. i have windows 7 and wondered if it is possible to have XP added.
View 1 Replies View RelatedI have a MSI GT725-212 Laptop and I get BSOD’s more than 5x every day.
I bought the computer with Vista 32-bit installed and had absolute no problems, then I upgraded to Win7 Enterprise (the 90 Day trial) and started having a lot of BSOD’s, I thought it was because of some driver which weren’t installed, I searched them in 64-bit and installed them. Device manager shows out of the Teredo Tunneling Pseudo-Interface no problems.
Even then I had BSOD’s very often. Yesterday installed I Win7 Pro 64-bit (Formatted C: where the OS was but D: remained unchanged). I had the same devices with problems (IR receiver and Memory Card slot), I installed the 64-bit drivers and the device manager didn’t complaint any more out of the Teredo Tunneling Pseudo-Intefase (In both cases I disabled these.). Even with the new Win7 Versions I remain having the BOSD’s and I don’t know what else to do.
Here can you find the contents from the Minidump directory
http://dl.dropbox.com/u/1194232/MiniDump.zip