When Plugging In IPod "Device Driver Software Was Not Successfully Installed"
Jan 2, 2012
When I plug in my ipod to any of the USB ports I get "Device driver software was not successfully installed." I followed all the itunes / ipod troubleshooting and no luck. I updated drivers and unintalled them and still no luck. I am getting this error with two seperate ipods, i restored one back to the factory settings and still nothing. All other devices (camera, thumb drive, etc.) work in these USBs.I have a 32 bit windows seven.
Most times when I start my machine or just turn on my monitors (the Windows Display setting is set to turn off at 20 minutes, sleep is set to Never), I find that Windows is installing software. Sometimes it's successful, sometimes it fails.I see others have had this issue, but the offered remedies (reinstall drivers) did not work (I consider I may not have done it properly).? How can I get Windows to install the software correctly and then stop attempting to re-install the software?(Below is the text of the message I get.)
[Window Title] Driver Software Installation [Main Instruction] Device driver software was not successfully installed Please consult with your device manufacturer for assistance getting this device installed. Bluetooth Hands-free Audio Bluetooth L2CAP Interface Bluetooth Remote Control
When trying to install my USB cable modem (Scientific Atlanta DPC2100R2), I'm always getting a popup message that says "Device Driver Software was not Successfully Installed." I don't even get a "Found New Hardware" message beforehand. I just switched over to Windows 7 Professional 64-bit from Windows XP today, and the modem was working fine earlier (when I was using XP).
When I put the Setup disk that came with my modem, AutoPlay will play it, but I can't set up anything that way. If I go through Device Manager to try and update the driver, I get a message along the lines of "Windows could not find updates." I even get this message when I manually direct it to my D: drive where the disk is.
I've even tried uninstalling the driver from Device Manager, unplugging the USB from my PC, restarting it, and then plugging the USB back in, but I still get the same error.
It really shouldn't be the modem, as it was working fine earlier and I am even using it right now as I type this on my other PC (that runs Windows XP) and it's working fine. Would anyone happen to know how to remedy this?
I have an Acer R3610 (so everything is via USB). When I plug in an I/O Magic disk drive, I get an error "Device driver software was not successfully installed".I had earlier tried to fix this situation by going to Device Manager and deleting all drivers under USB controllers. When I rebooted everything re-installed except for USB Mass Storage Device.
When ever i plug my xbox 360 wireless receiver device, my pc gets the blue screen and restarts itself, when its unplugged, everything is fine and no crashes?My PC spec is Windows 7 pro 32 bit, e8500 3.5ghz, ATI 6850, 4gb RAM?
My computer crashes whenever I plug a USB device in it. I first noticed it when I plugged in a camera, thinking it was the camera, I then tried my own flash drive which worked fine (Possibly using fat32 format); but yesterday I tried my mates flash drive (NTFS) and that crashed it, I've also tried a bunch of other flash drives around the house and they also crash my computer.I'm running windows 7 64 bit, ASUS p8z68-v pro mobo, i5 2500k, 4GB DDR3 1600MHz ripjaw, Sapphire HD6950.I have tried running memtest which passed 13 times flawlessly. I also tried running driver verifier, which seemed to really screw me over. At the start, when the windows logo first appears, it hangs a little bit and then blue screens. Luckily I had made a system repair disk the night before. I also don't know why but when I tried to start in safe mode (pressing f8 while booting) all it gave me was the option to choose which device to boot from, which I'm guessing is some sort of feature on my mobo, but I digress. So I'm guessing it's something to do with USB drivers?
Whenever I plug in any USB device, the monitor will go blank, but the case fans and lights will continue operating. The computer remains like this until I hold down the power button to turn it off and then restart it. It will restart fine. In addition to the monitor going blank, all power is turned off from USB devices (e.g. optical mouse light turns off).This occurs probably about 25% of the time I plug a USB device in (sometimes nothing happens, as should be).It does not mater which port I use. It's happened with rear ports, a hub wired to a rear port, front case ports (plugged into motherboard USB pins), or a PCI USB hub.
I've looked extensively for solutions and can't find any. I checked my motherboard multiple times for swollen capacitors and have not found any.Today (and never before) when I plugged a mouse in, the same issue occurred, but the monitor turned back on about two seconds later, and a pop-up notified me of drivers successfully being installed. (I didn't notice whether USB power was cut) This makes me think that the computer is adjusting the display (as it does when a program requests administrative permission and the screen sometimes goes blank) but for some reason does not come back from it. There really is no indication that Windows stops. I never get a BSOD.Operating System: Windows 7 64-bit, regularly updatedDisplay Adapter: Nvidia GeForce 9600 GSO (756MB)
So I built my own PC late last year and have had absolutely no problems with it whatsoever, until my brother plugged in his JVC HD GC-FM2 camera. This camera is supposed to be able to be plugged into any PC without issue and without the need to install software/drivers, but for me it blue screens. I am able to plug in other USB devices just not this camera.I'm running Windows 7 Pro 64 bit, my computer is up to date, to the best of my knowledge anyway lol. I checked event viewer and if it's
Every now and then my WiFi stops working, and if I go to dev mgr, the General tab tells me that "No drivers are installed for this device" for device status. On the other tabs, however, I have all the details on the installed driver, and if I ask Windows to update the driver, it tells me that the best driver is already installed. The problem is solved by rebooting, but I find that annoying. I'd like to figure out WHY it does that. I've saved earlier versions of that particular driver from over the last three years, and the problem occurs with all of the drivers. This is a Windows 7 Ultimate 64-bit system. The driver is an Intel driver; the one installed at this moment (it just happened again, and I have not rebooted, since I had a powerline enet outlet handy), and the version of the Intel(R) WiFi Link 5100 AGN is 14.3.1. I have other versions of that driver saved, from 13.2.1.5 to 15.1.1_Ds64. I had reverted to the 14.3.1 because the more recent versions seemed to be worse about the driver disabling itself or whatever it is doing.Coincidentally with this, the event viewer shows that mmc.exe was terminated because it was hanging. I had just run sfc yesterday, and there are no corrupt files that Windows cannot fix, and there weren't even any corrupt files that it DID fix.
Can anyone help me with installing Canon Lide 25 Scangear, in Windows 7. I've downloaded the software, which is in a zip file, and unzipped it to a folder. When I run the setup, it seems to run, but nothing happens. Has anyone successfully installed Canon software on Windows 7?
Why Windows won't apply my updates. I'm running Windows 7 Pro 64 bit. I attempt to install my updates but after refreshing the Windows Update program it says they installed successfully but is still offering the the same updates. I've ran Microsoft FixYa from their website to no avail. The updates giving me problems are:
Security Update for Windows 7 for x64-based Systems (KB2676562) Security Update for Windows 7 for x64-based Systems (KB2709715) Update for Windows 7 for x64-based Systems (KB2679255)
I have puchased an ipod touch because my ipod nano was full. I want to use the songs from the nano on the ipod touch but also add more music to that Ipod Touch. Most of my music is from CD's.How should I add this new Ipod touch which has 32gb storage.I want to keep same music on the Nano but change playlists on it or delete songs and add others in the 4gb storage. Will the old Nano still sync when I make changes?
How to install some software. Tried to download the "chipset" but obviously didnt do it properly. The pop up reads..."Device driver not successfully installed" the list that followed was.."Intel(R) ICH9 Family USB Host Controller 2934"
Name:Base System DeviceID:PCIVEN_1180&DEV_0843&SUBSYS_02091028&REV_124&2C68880C&0&0AF0Error code:28 Name:Base System DeviceID:PCIVEN_1180&DEV_0592&SUBSYS_02091028&REV_124&2C68880C&0&0BF0Error code: 28
I have a brand new Dell XPS8500 running Windows 7 Ultimate x64. When trying to play online games, I keep getting this message:Display driver AMD driver stopped responding and has successfully recovered.The browser (Chrome) freezes up, the screen goes black, the error message pops up, the browser goes completely white and I have to go into task manager and kill it.I tried getting a screen shot but could not.
i have a problem with my usb mass storage.my usb ports read usb mouse,data cables but they do not read pen drives and as i attach a pd,it shows "usb device not recognized" or "device driver not installed". it was working fine in xp but now in win 7 it doesn't. i have installed all drivers and have tried every software but it doesn't work.
I have had this Display Driver has stopped responding and has recovered successfully error ever since I have purchased my HD 7770. I contacted HIS and they told me to disable ULPS. I have but it still crashes. The speeds of the card have not been touched and temps when Idle are 27-30c.
I cannot even render a video in Sony Vegas Pro without it getting the error. when that happens vegas pro crashes and i must start the render again. other times are in games.
Counter Strike Source crashes when I get the MOTD (message of the day) or I select to buy weapons. if i start the game again its all fine?!?!
I have a 700w CoolerMaster eXtreme Power Plus Catalyst 12.4 (most stable I have tried 12.6) CCC overdrive settings. Core: Default Mem: default Power +20 for extra headroom
Right for a while i've been suffering from a problem where whilst playing certain PC games (i.e. Empire Total War, Battlefield Bad Company 2 & even Spore) the game begins showing black screens followed by a complete crash of the game, me having to ctrl+alt+delete it and be given this message at the bottom right of my PC ("Display Driver nvidia Windows Kernel Mode Driver, Version 301.42 stopped responding and has successfully recovered").
if i am playing league of legends i am getting an error named 'display driver stopped responding and has successfully recovered'.. dont know how to fix this.. i tryed newest patch but still it is not fixed, i tryed older versions but still no succes.. uninstalled the game and installed it but that dont work either.. i got a GeForce GTX 260 oc.
Started about a week ago. Screen goes blank for a few seconds, screen returns and the message above popped up. Some days, it only happens once or twice, on others, it can happen a good 3-4 times in the span of an hour.
when i gaming suddenly my VGA have error like this "Display driver nvlddmkm stopped responding and has successfully recovered." and the graphic become square square , but after i restart , my gaming and graphic back to normal, is that something wrong with my Hardware? or maybe just have a crash with the Game or application?[CODE]
I have come across the message (from a video card failure) that says "Display driver nvlddmkm stopped responding and has successfully recovered." The solution is to do all of the following steps:
1. Uninstall all video drivers 2. Update your drivers to the latest version 3. Update your bios 4. Try different PCIe/PCI/AGP slots on your motherboard 5. Try different power rails coming from your power supply - make sure your power supply can support your graphics card. 6. Update your version of Direct X 7. Update your chipset drivers 8. Go to your video card settings>advanced settings> and set everything to application controlled 9. Go to your video card settings>advanced manage 3D settings> and turn off vertical sync 10. make sure your card is not overheating 11. Memory can sometimes cause video problems, run a memtest 12.Check out these posts Display driver nvlddmkm stopped responding - Info about TDR and other info [URL]
Set 9 is what fixed my problem. If none of this works reinstall your OS and try all these steps again.
hi..am using dell xpsL502x my configuration is 6gb ram 1gb nividia graphics card and 500gb hd..am a multimedia student am using after effects cs4 while using this after few min my screen turns into black screen and an error occurs "display driver (nividia) stopped responding and successfully recovered.." i re-installed my drivers lots of time but again am getting the same error
