Device Driver Software Was Not Succesfully Installed?
Apr 29, 2012Device driver software was not succesfully installed?
View 1 RepliesDevice driver software was not succesfully installed?
View 1 Replieshow do i find driver for unknown device on my laptop?
View 3 Replies View RelatedEvery now and then my WiFi stops working, and if I go to dev mgr, the General tab tells me that "No drivers are installed for this device" for device status. On the other tabs, however, I have all the details on the installed driver, and if I ask Windows to update the driver, it tells me that the best driver is already installed. The problem is solved by rebooting, but I find that annoying. I'd like to figure out WHY it does that. I've saved earlier versions of that particular driver from over the last three years, and the problem occurs with all of the drivers. This is a Windows 7 Ultimate 64-bit system. The driver is an Intel driver; the one installed at this moment (it just happened again, and I have not rebooted, since I had a powerline enet outlet handy), and the version of the Intel(R) WiFi Link 5100 AGN is 14.3.1. I have other versions of that driver saved, from 13.2.1.5 to 15.1.1_Ds64. I had reverted to the 14.3.1 because the more recent versions seemed to be worse about the driver disabling itself or whatever it is doing.Coincidentally with this, the event viewer shows that mmc.exe was terminated because it was hanging. I had just run sfc yesterday, and there are no corrupt files that Windows cannot fix, and there weren't even any corrupt files that it DID fix.
View 5 Replies View RelatedHow to install some software. Tried to download the "chipset" but obviously didnt do it properly. The pop up reads..."Device driver not successfully installed" the list that followed was.."Intel(R) ICH9 Family USB Host Controller 2934"
View 9 Replies View RelatedName:Base System DeviceID:PCIVEN_1180&DEV_0843&SUBSYS_02091028&REV_124&2C68880C&0&0AF0Error code:28
Name:Base System DeviceID:PCIVEN_1180&DEV_0592&SUBSYS_02091028&REV_124&2C68880C&0&0BF0Error code:
28
Most times when I start my machine or just turn on my monitors (the Windows Display setting is set to turn off at 20 minutes, sleep is set to Never), I find that Windows is installing software. Sometimes it's successful, sometimes it fails.I see others have had this issue, but the offered remedies (reinstall drivers) did not work (I consider I may not have done it properly).? How can I get Windows to install the software correctly and then stop attempting to re-install the software?(Below is the text of the message I get.)
[Window Title]
Driver Software Installation
[Main Instruction]
Device driver software was not successfully installed
Please consult with your device manufacturer for assistance getting this device installed.
Bluetooth Hands-free Audio
Bluetooth L2CAP Interface
Bluetooth Remote Control
When trying to install my USB cable modem (Scientific Atlanta DPC2100R2), I'm always getting a popup message that says "Device Driver Software was not Successfully Installed." I don't even get a "Found New Hardware" message beforehand. I just switched over to Windows 7 Professional 64-bit from Windows XP today, and the modem was working fine earlier (when I was using XP).
When I put the Setup disk that came with my modem, AutoPlay will play it, but I can't set up anything that way. If I go through Device Manager to try and update the driver, I get a message along the lines of "Windows could not find updates." I even get this message when I manually direct it to my D: drive where the disk is.
I've even tried uninstalling the driver from Device Manager, unplugging the USB from my PC, restarting it, and then plugging the USB back in, but I still get the same error.
It really shouldn't be the modem, as it was working fine earlier and I am even using it right now as I type this on my other PC (that runs Windows XP) and it's working fine. Would anyone happen to know how to remedy this?
When I plug in my ipod to any of the USB ports I get "Device driver software was not successfully installed." I followed all the itunes / ipod troubleshooting and no luck. I updated drivers and unintalled them and still no luck. I am getting this error with two seperate ipods, i restored one back to the factory settings and still nothing. All other devices (camera, thumb drive, etc.) work in these USBs.I have a 32 bit windows seven.
View 1 Replies View RelatedI have an Acer R3610 (so everything is via USB). When I plug in an I/O Magic disk drive, I get an error "Device driver software was not successfully installed".I had earlier tried to fix this situation by going to Device Manager and deleting all drivers under USB controllers. When I rebooted everything re-installed except for USB Mass Storage Device.
View 4 Replies View Relatedi have a problem with my usb mass storage.my usb ports read usb mouse,data cables but they do not read pen drives and as i attach a pd,it shows "usb device not recognized" or "device driver not installed". it was working fine in xp but now in win 7 it doesn't. i have installed all drivers and have tried every software but it doesn't work.
View 1 Replies View RelatedI have been trouble shooting my sound for quite some time with no results. I've deleted and reinstalled drivers, checked bios, etc. no luck.here are my speccy details
View 10 Replies View Relatedkeep getting this...Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)...and this seems to be stopping me from adding my nexus 7 to my wifi...detects problems ..missing driver
View 1 Replies View RelatedFor a while now(speaking in month terms), my sound would be working just fine. But sometimes when I put it into hibernate(for the night) and turn it back on, my speaker icon would have a red X over it. The only way this goes away is if I leave the computer off for a long time or, spam restarts(lol). What can be the problem here? My guess is that it's getting old or something.
Also, when I try to find it in the device manager, it doesn't show up. It can't even detect it either.
Also, I reinstalled the drivers yesterday, and it worked again....for another few hours. So when I retried doing that, windows update didn't detect the sound card.
I lost my audio device and have tried repeatedly to reinstall it with no such luck. It is Realtek HD Audio. I have Windows 7 x64
View 3 Replies View RelatedI have a HTPC in my living room which since updating on the weekend now has no sound I have found similar issues and posts on various forums from searching all afternoon Sunday but none with a solution (that works for me) other than a full Windows 7 reinstall. I have a PC running onboard realtek (ASRock ConRoe 745 DVI), which was working perfectly until Service [pack one update and two other updates this Sunday. I unfortunately discovered for some reason the System Restore on this machine was set to off so that is not an option The audio symbol bottom right says there is no audio device installed, however if you look in the device manager there is the correct Realtek device installed with no exclamation mark and it is reporting as working correctly. If you right click on the red cross and click playback devices it takes you to the realtek device properties and it is set as default. (In fact if you unplug the speaker jack the PC advises you of this even though it says no audio device installed). If you click on the red cross it launches the fault detection wizard and returns "Audio Device is Disabled - Not Fixed"I have tried uninstalling the device - scanning for changes - reinstall Repeated the above but deleted the device drivers Tried a SFC scan and a Chkdsk Scan (No errors) Tried with the Microsoft default high definition audio drivers and the latest (and not latest) realtek drivers Tried disabling in the BIOS uninstalling and reinstalling after re-enabling Tried uninstalling the updates and repeating the above Tried uninstalling the service pack and repeating the above Finally unenabled the onboard card and installed a PCI soundblaster Audigy - Same problem?
View 7 Replies View RelatedDevice drivers are not installed. A driver has not been installed for this device preventing it from working properly.The device driver for Network Controller has not been installed. This device will not be available until the correct device driver is installed.
1. Try installing the drivers using Windows Update.
2. Install the drivers that are on the installation media that came with the device.
3. Check with the manufacturer for an updated driver.
Explanation of Error Codes Generated by Device Manager.I have installed the driver for my network card, and the bluetooth driver. I'm not sure about drivers for a wireless connection, I don't know if they're included in the network card drivers or not. What's this network controller thing? And what driver would satisfy it? I'm on an Acer Aspire 5742ZG. Their driver support is pretty bad.Hardware Identification Fixed my problem. I found out using that website that the Network Controller was an Antheros Wireless Network Adapter. Antheros. When I installed my drivers and saw that I had a Broadcom LAN card, I assumed that I'd also have a Broadcom Wireless network adapter. Well nope. I deleted the Broadcom driver, installed the Antheros one and now the problem is fixed.
Just need to know how to fix this for my friend
View 2 Replies View Relatedi am having an error with my speakers, it says no audio device is installed, i have visited alot of these forums but no real solution, i did direct X diagnostice tool test and it says i have no sound card installed...i really need help with this i have been at this for weeks. PLEASE HELP ME. I recently upgraded from windows xp to windows 7 my speakers were working fine b4 that but now there is a red X on the speaker icon, device manager says that the device is installed and working okay, this is driving me nuts i have been at this for weeks, i have windows 7 and a 32 bit operating system.
View 2 Replies View RelatedAfter virus attack on ibm Thinkcentre 832077g, I formatted xp and installed windows 7 but there is no sound . If I try to play a song, there is a message saying no sound device installed. Which drivers should I install becuse have tried many without success.
View 2 Replies View Relatedi have a HP Pavilion dv6000. i upgraded from windows vista to windows 7. there's a red X on my volume and it says no audio output device is installed. in the Device manager there is no sound, video and game option-in the sound device the playback is blank.
View 1 Replies View RelatedI'm pretty sure you guys have seen this before; sound icon with a little x over it. I'm posting 2 pictures up to, maybe, give you guys an idea of what the issue can be.Additional information: the laptop at hand tries to install new drivers but fails everytime. No idea why. It tries to install a bluetooth driver.
View 5 Replies View Relatedi had this problem before, when i had vista. I upgraded to windows 7 x64 ultimate and i had sound. but after a few days i got the red circle with the white x. and it says no audio output device is installed. but the confusing part is. under device management. i dont see a sound, video, and game controller drop down.
View 4 Replies View RelatedI've been searching on Google for the last three and a half hours for a solution but came up with nothing, so I thought I'd post here to see if anyone can tell me what's up. I turned on my laptop today to find that there was a little red 'x' over the audio symbol, and upon further inspection it turned out that there was no audio driver installed. I wasn't very bothered about it at first, because after a Windows update once I had to reinstall it, and everything ran smoothly from there because I just reinstalled the driver which originally came with the laptop. Now, this is the problem. I tried installing the driver, and the installation seemed to go fine, I was prompted to restart, did so, but when I logged in after the reboot, I was still getting the "No Audio Output Device Is Installed" error. I searched around, tried a different Realtek HD driver. Same result. Tried again with a different driver, no luck. Wax on, wax off. I can't figure out why it's happening, but maybe someone here can?
View 5 Replies View RelatedI'm getting the error on my volume;"No audio output device is installed"Any fix for this?
View 2 Replies View RelatedI have Windows 7 32bit OS on my comp, few days ago i bought new headphones, steel series siberia v2 USB 7.1(51103), they didn't work in my computer, but they did in other pc, that I have, actually in 3 others. The problem was same as here "No Audio Output Device is Installed" but only with the USB PnP audio device, my onboard sound card worked fine. I need to disable my onboard card to enable any external card. (I think I also uninstalled drivers to my Onboard card). I did that, still didn't worked. So I enabled Onboard audio device (and installed drivers) in Bios and now I got the problem with onboard card as with headphones.
I tried to reinstall/uninstall to allow windows to find drivers, I tried a lot of different ones, don't think drivers are the case, cause its not working for any of 3 cards, even they have diffrent drivers, little chance to have 3 models with wrong drivers as newest, I tried even downloading drivers for other motherboard, because someone said it worked for them QQ. My Windows Audio service is enabled. I tried restarting Bios. Tried even plugging PCI sound card, same problem.
When I hover my mouse over the speaker icon, "no audio output device is installed" appears. I still have sound. There's a red X in along with the speaker icon. When I troubleshoot, it fails and has error 0x8000FFFF. My sound card and microphone stuff are there when I check the devices, and they work. I still can adjust volume with my keyboard, but it starts the troubleshooter when I click the speaker
View 1 Replies View Relatedis the only answer is to get a usb sound card ?
View 10 Replies View RelatedThe drivers for this device are not installed. (Code 28)
View 2 Replies View RelatedI recently installed a new graphics card and upon turning my computer on (Win7 x64), the sound doesn't work. The sound icon has a red 'x' over it and it says "no audio device is installed". In 'Device Manager', the drivers are installed and without incident.
View 4 Replies View RelatedI have inspiron 5110 core i7 with Win 7 ultimate x64 and on my device manager I keep getting that the bluetooth peripheral device driver is not installed, how can I correct this problem?
View 1 Replies View RelatedFor about 2 weeks ago my battery on my laptop (ASUS Eee PC - Windows 7) got low and the computer turned off. When I turned it on again the sound on the computer didn't work, the sound symbole on the right corner on the bottom has a red X sign. I've just recovered my computer to fabric-new and the sound still doesn't work and the red X symbole is still there.When clicking on the sound symbole with the red X on the right corner in the bottom it says "identifying problem..." and then it says that it couldn't identify the problem... My webcam on the computer doesn't work either after that.On control panel it says "no audio device installed" and when I deleted RealTek and downloaded it again it still doesn't work.
View 1 Replies View Related