i have a problem with my usb mass storage.my usb ports read usb mouse,data cables but they do not read pen drives and as i attach a pd,it shows "usb device not recognized" or "device driver not installed". it was working fine in xp but now in win 7 it doesn't. i have installed all drivers and have tried every software but it doesn't work.
View 1 Replieshow do i find driver for unknown device on my laptop?
View 3 Replies View RelatedIt's recognized in device manager as "Unknown device". But I've not connected anything to pc. Also all of my usb ports are working at 1.1 speed. When I try to connect any device, I get the message "that it could work faster, if i connect it to hi-speed usb port".
View 6 Replies View RelatedHow to install some software. Tried to download the "chipset" but obviously didnt do it properly. The pop up reads..."Device driver not successfully installed" the list that followed was.."Intel(R) ICH9 Family USB Host Controller 2934"
View 9 Replies View RelatedName:Base System DeviceID:PCIVEN_1180&DEV_0843&SUBSYS_02091028&REV_124&2C68880C&0&0AF0Error code:28
Name:Base System DeviceID:PCIVEN_1180&DEV_0592&SUBSYS_02091028&REV_124&2C68880C&0&0BF0Error code:
28
Device driver software was not succesfully installed?
View 1 Replies View RelatedMost times when I start my machine or just turn on my monitors (the Windows Display setting is set to turn off at 20 minutes, sleep is set to Never), I find that Windows is installing software. Sometimes it's successful, sometimes it fails.I see others have had this issue, but the offered remedies (reinstall drivers) did not work (I consider I may not have done it properly).? How can I get Windows to install the software correctly and then stop attempting to re-install the software?(Below is the text of the message I get.)
[Window Title]
Driver Software Installation
[Main Instruction]
Device driver software was not successfully installed
Please consult with your device manufacturer for assistance getting this device installed.
Bluetooth Hands-free Audio
Bluetooth L2CAP Interface
Bluetooth Remote Control
Every now and then my WiFi stops working, and if I go to dev mgr, the General tab tells me that "No drivers are installed for this device" for device status. On the other tabs, however, I have all the details on the installed driver, and if I ask Windows to update the driver, it tells me that the best driver is already installed. The problem is solved by rebooting, but I find that annoying. I'd like to figure out WHY it does that. I've saved earlier versions of that particular driver from over the last three years, and the problem occurs with all of the drivers. This is a Windows 7 Ultimate 64-bit system. The driver is an Intel driver; the one installed at this moment (it just happened again, and I have not rebooted, since I had a powerline enet outlet handy), and the version of the Intel(R) WiFi Link 5100 AGN is 14.3.1. I have other versions of that driver saved, from 13.2.1.5 to 15.1.1_Ds64. I had reverted to the 14.3.1 because the more recent versions seemed to be worse about the driver disabling itself or whatever it is doing.Coincidentally with this, the event viewer shows that mmc.exe was terminated because it was hanging. I had just run sfc yesterday, and there are no corrupt files that Windows cannot fix, and there weren't even any corrupt files that it DID fix.
View 5 Replies View RelatedWhen trying to install my USB cable modem (Scientific Atlanta DPC2100R2), I'm always getting a popup message that says "Device Driver Software was not Successfully Installed." I don't even get a "Found New Hardware" message beforehand. I just switched over to Windows 7 Professional 64-bit from Windows XP today, and the modem was working fine earlier (when I was using XP).
When I put the Setup disk that came with my modem, AutoPlay will play it, but I can't set up anything that way. If I go through Device Manager to try and update the driver, I get a message along the lines of "Windows could not find updates." I even get this message when I manually direct it to my D: drive where the disk is.
I've even tried uninstalling the driver from Device Manager, unplugging the USB from my PC, restarting it, and then plugging the USB back in, but I still get the same error.
It really shouldn't be the modem, as it was working fine earlier and I am even using it right now as I type this on my other PC (that runs Windows XP) and it's working fine. Would anyone happen to know how to remedy this?
If i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
View 2 Replies View RelatedI have been trouble shooting my sound for quite some time with no results. I've deleted and reinstalled drivers, checked bios, etc. no luck.here are my speccy details
View 10 Replies View RelatedI am getting a constant error. When the error happens I hear the usb connection alert sound and a pop box appears in the lower right corner of my screen. I tried installing the chipset drivers again and when that didn't work i did a system reinstall. The only us devices I am using is my wired mouse and keyboard. Both usb devices work.
View 1 Replies View RelatedWhile working on my laptop yesterday evening, my mouse & external hdd stopped responding. On ejecting & re-inserting them both started getting this message 'USB Device Not Recognized'.Now none of my three USB ports are working. Though on cross checking, the devices are working on other machine.The message is getting flashed repeatedly. Also, observed that my battery got drained while it was switched off throughout the night. Have never faced either of these issues with almost 20months of working with Windows 7 Pro.
View 4 Replies View RelatedEver since I moved into my new apartment a month ago I've been having problems with my USB mouse. I got a new one for christmas and the problems still persist. When i first moved in it was working ok but randomly not working then it finally gave out. Every time i insert the mouse receiver it would be like rolling the dice whether it would work or not. I've tried my tablet and my memory stick as well and those don't work either so i know its not a problem with the mouse.I've looked through forums online and have tried almost everything:I unplugged the power cord waited and plugged it back in.I've uninstalled all of the USB Root HubsI've unchecked the Allow the computer to turn off this device to save powerI've updated my ChipsetI've updated my BIOSI've tried Microsoft FixitI've installed the driver for the mouse from its website.
View 3 Replies View Relatedwhen i plug my Ipod 4g an message at the bottom of my page says USB Device not Recognized One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it.
View 2 Replies View RelatedUSB device not recognized.
View 1 Replies View RelatedI keep receiving this popup in the taskbar. Tried disabling it, dindn't work. I wish to rectify this and I believe my computer thinks this device is wrongly connected or faulty when actually none exist. I left all USB ports unused yet I get this problem.
View 2 Replies View RelatedI am trying to connect a Blue Snowball USB Microphone to record stuff with but when I plug it into the USB port it doesn't work. Windows recognizes the device and starts trying to install the drivers but then it fails and gives no explanation. In Device Manager it shows up as "Blue Snowball" but has a yellow exclamation point next to it. When I click on it and try to install drivers it says that there are no drivers available. The light is on the device so it's getting power. I checked their troubleshooting guide and turned the USB cord in the other direction. I've restarted my computer a few times, all to no avail. I am using USB 2.0 ports and my OS is Windows 7 - Professional 32-bit.
I consider the sound card but I can play music and use skype (if I connect a 3.5mm POS microphone to the back) just fine.
I have Kingston 2GB DataTraveler (DT) and windows 7 RTM 64bit does not recognize it when pluged into 2 front usb ports or 2 top back usb ports. Other 6 lower back ports work. I have Gigabyte GA-EP35-DS3 mobo. This mobo has 8 usb on the back and 2 usb headers. One header is used for Codegen 7in1 cardreader+1usb port, other is used for 2 front panel usb ports. Few things ive noticed:
1) my old apacer mp3 player works on all usb ports.
2) most of new higher capacity usb's are not recognized in those malfuncioning ports
3) if i plug DT into Codegen's USB port, DT is then recognized on all ports
I've read this thread, tried instaling new Intel's Infs, tried removing all usb devices exept Codegen's. No effect. Any suggestions for my case?
I have a WD Passport 160GB portable HDD, which worked fine in XP on the same computer before I installed Windows 7.
As many other people experienced, the once the device is connected, it will show USB device not recognized. However, my mouse and keyboard, which are USB also, are working flawlessly.
Besides the Passport, I have a Maxtor External HDD which is not working also, I tried every single USB port on the computer and it just won't work. And this one is powered by a small power adapter, so it should not be anything related to USB power. On the other hand, the Maxtor HDD is visible from BIOS, just not in Windows 7.
My computer is single boot Windows 7 RC 64bit, clean install.
I'm using Q6600, Foxconn MARS P35 mobo, Seagate 7200.10 250GB HDD, PNY 8600GT, OCZ 2x2GB DDR2 800 ram. I don't think the hardware have any problem since in XP everything worked fine, and all the drivers are up to date according to the device manager in Windows 7.
Any advice?
I recently used my new iphone USB got from Fry's (i used before without any problems) to my windows computer -- used itunes no problems -- any backups no problems. Suddenly it stopped working as it is not getting recognized by my computer. Now, getting error 43 on my device manager. I have windows 7 ultimate.I also used my usb with my ipod and iphone to my usb port in my car to use to play music and it cannot recognize it now. My radio turns off when I plug this in. My usb cable is new!! WTH! Then i used another usb in my computer and still won't budge! no recognition? Then used it in my car then to my work computer then to my laptopn and both usb's are not recognized. WTH?Note, all other usb devices work in my computer i.e.: External HDD and mouse/printer BUT my (2) usb cables don't work.
View 3 Replies View RelatedI have a laser projector, and i control it with my windows seven notebook by usb.
Problem is, sometimes by a static shock of other devices or by other causes i do not know of, the notebook suddenly refuses to work with the usb drive anymore and the projector freezes.
but here is the part i want to solve. after replugging the usb drive windows says that the usb device is not regonised.... after plugging out and waiting 2 minutes and then replug makes it work again...if i do it sooner then usally it still shits about the device not being regonised.
I don't get the device not recognized. When I plug device into usb nothing happens
View 2 Replies View Relatedi play my usb with my panasonic recorder and when i try to use it with labtop
it recognized it but can not read
I have recently replaced my laptop with a new hard drive and extra 4GB ram slot,My laptop is a samsung np400b5b-s02uk, i've put in a Seagate 750GB SATA-II HD and a 4GB 1333MHZ Corsair Ram slot, I am trying to install Windows 7 Home (x64) onto it, i insert the disc into the drive but a message appears saying boot device not recognised, i've selected it to boot from CD in the BIOS but still nothing.
View 2 Replies View RelatedUSB Device not Recognized::error while connecting my external hard disk,previously it was working fine
View 2 Replies View RelatedWhenever I use one of my USB ports, afterwards I get an error that lasts all the time that says USB device not recognized. I have gotten rid of it but then when I go back and use it again, that error pops up. The usb ports work, I use it to download pictures and other things, but I cannot get the error gone. Someone suggested I unplug the internet completely for a few minutes and it would reset itself, but that didn't work. I put the media card usb back into the port and went to where it says it is safe to remove hardware and then took it out, but that didn't work either.
View 9 Replies View RelatedI've been encountering error Code 43.I've tried a lot and I am running out of options.I'm working on an Acer Aspire 5542G.My operating system is Windows 7.The USB device not being recognized is my Wacom Intuos 4 PTK.
- I've de-installed and re-installed my tablet driver.
- I've shut down and turned on the laptop.
- I've returned the laptop to original factory settings.
- I've taken the battery out, and put it back in again.
- I've de-installed and re-installed universal serial bus controllers.
- I've used CCleaner to clear up my register.
- I've used my google-fu to it's full extent, but I haven't found a fix.
I've been having an issue with the xbox 360 wired controller since I built my new pc. When I plug it in via usb the device is not recognized by windows and no matter what I try it simply will not work.
Things I have tried: downloaded chipset drivers downloaded Software Downloads: Xbox 360 Controller for Windows tried the whole leaving the computer and all usb devices unplugged and off for a good few hours. ininstalled all the usb controllers and rebooted tried it in all usb ports, 3.0 and 2.0 searching for hours on google tried enabling/disabling usb legacy support in the bios tried running microsoft fixit thing (whatever that is) tried updating the drivers manually through the device manager but windows insists that the device is up to date. tried uninstalling and removing ethernet cable to try and force me to choose drivers. windows is fully updated I even bought a new controller thinking the last one was broken. The controller powers up when you plug it in, you can clearly see the green lights around the guide button flash but then nothing happens.
I had an "unknown device" show up in devices and printers a couple days ago. It was also listed in device manager and said it was a USB controller. Everything worked and I've not added any new hardware. I have 2 partitions both with Windows 7 and the error showed in both. I've found that others were having the same issue, some needed drivers, some said cables needed replaced. Before I got serious with the troubleshooting, I read up a little and found a forum that said you should shut down then disconnect the power cord, wait a couple minutes then power up. Sometimes the motherboard needs to reboot and the devices will be reloaded or reassigned as they should be. It worked for me, it was an easy fix to an annoying problem.
View 5 Replies View Relatedi just bought a Trust Thinity wireless media keyboard. It comes with no disc or drivers and the usb receiver is just plug and play.When I plug it in it gives me the message "One of the usb devices attached to this computer has malfunctioned."If I keep unplugging and plugging back in it eventually picks up the drivers and installs, unitil I switch off my computer and then its back to square one.
All my motherboard drivers are up to date and bios is on latest version. Iv tryed uninstalling all my USB controllers and restarting. Iv even installed a fresh copy of Windows 7 64bit and 32bit to see if that made any difference but it hasnt.
The keyboard is brand new and I have tryed it on XP and it picked it up, installed the drivers and worked straight away.