My computer crashes whenever I plug a USB device in it. I first noticed it when I plugged in a camera, thinking it was the camera, I then tried my own flash drive which worked fine (Possibly using fat32 format); but yesterday I tried my mates flash drive (NTFS) and that crashed it, I've also tried a bunch of other flash drives around the house and they also crash my computer.I'm running windows 7 64 bit, ASUS p8z68-v pro mobo, i5 2500k, 4GB DDR3 1600MHz ripjaw, Sapphire HD6950.I have tried running memtest which passed 13 times flawlessly. I also tried running driver verifier, which seemed to really screw me over. At the start, when the windows logo first appears, it hangs a little bit and then blue screens. Luckily I had made a system repair disk the night before. I also don't know why but when I tried to start in safe mode (pressing f8 while booting) all it gave me was the option to choose which device to boot from, which I'm guessing is some sort of feature on my mobo, but I digress. So I'm guessing it's something to do with USB drivers?
When ever i plug my xbox 360 wireless receiver device, my pc gets the blue screen and restarts itself, when its unplugged, everything is fine and no crashes?My PC spec is Windows 7 pro 32 bit, e8500 3.5ghz, ATI 6850, 4gb RAM?
So I built my own PC late last year and have had absolutely no problems with it whatsoever, until my brother plugged in his JVC HD GC-FM2 camera. This camera is supposed to be able to be plugged into any PC without issue and without the need to install software/drivers, but for me it blue screens. I am able to plug in other USB devices just not this camera.I'm running Windows 7 Pro 64 bit, my computer is up to date, to the best of my knowledge anyway lol. I checked event viewer and if it's
Whenever I plug in any USB device, the monitor will go blank, but the case fans and lights will continue operating. The computer remains like this until I hold down the power button to turn it off and then restart it. It will restart fine. In addition to the monitor going blank, all power is turned off from USB devices (e.g. optical mouse light turns off).This occurs probably about 25% of the time I plug a USB device in (sometimes nothing happens, as should be).It does not mater which port I use. It's happened with rear ports, a hub wired to a rear port, front case ports (plugged into motherboard USB pins), or a PCI USB hub.
I've looked extensively for solutions and can't find any. I checked my motherboard multiple times for swollen capacitors and have not found any.Today (and never before) when I plugged a mouse in, the same issue occurred, but the monitor turned back on about two seconds later, and a pop-up notified me of drivers successfully being installed. (I didn't notice whether USB power was cut) This makes me think that the computer is adjusting the display (as it does when a program requests administrative permission and the screen sometimes goes blank) but for some reason does not come back from it. There really is no indication that Windows stops. I never get a BSOD.Operating System: Windows 7 64-bit, regularly updatedDisplay Adapter: Nvidia GeForce 9600 GSO (756MB)
I am using Texas Instruments C5515 USB Stick DSP Development Kit. Although the device does not give any error with other PC's( Win 7 -x64), when I plug it to my PC(Asus N53S Laptop-Win7-x64) crash dump occurs. The .dmp file is attached to this mail.
I'm getting a BSOD when I plug in a logitech pro 9000 or a c270. The PC starts to install the drivers then I get a BSOD for ks.sys. I don't have any Western Digital software installed. Attached are the logs.
Windows 7 Enterprise 6.1.7601 Service Pack 1 Build 7601 Dell Latitude E6420 Bios: Dell A04, 5/11/2011
Whenever i plug a USB into a port, it will simply crash with the error or the device will not appear in My Computers. However, if i plug my external hard drive ,everything seems to work.My laptop is a Windows 7 Home Premium 64 Bit, which is originally installed onto this laptop and came with it baught my laptop this year around July (OEM)
When I plug in my ipod to any of the USB ports I get "Device driver software was not successfully installed." I followed all the itunes / ipod troubleshooting and no luck. I updated drivers and unintalled them and still no luck. I am getting this error with two seperate ipods, i restored one back to the factory settings and still nothing. All other devices (camera, thumb drive, etc.) work in these USBs.I have a 32 bit windows seven.
I have a Intel Quad Core HP elite Desktop M8190a everything is as manufactured except i upgraded the ram to 4GB.Originally running Vista .. Last week while playing a mp3 file from an external HDD a loud "ticking" occured then the computer crashed. Restarted automatically then a BSOD appeared stating something about a BAD_POOL_CALLER.
Problem Name:BlueScreen BCCode:50 BCP1:8C100000 BCP2:00000000 BCP3:82E5A1C5
[code]....
For the last week it has kept crashing daily so i decided to do a full system format to take it back to factory settings. Seemed all was going well, until i got a message stating "bad system configuration, unable to install windows". So i decided to do a fresh clean install of windows 7 64bit (genuine) that i had purchased and had been meaning to do for months. All went well .. connected to the internet fine, activated windows 7. I then installed my printer and all seemed fine. But the second i hooked up my external HDD (which is not new, ive had it as a backup since i purchased the pc 4yrs ago) .. BSOD !!! AGAIN!!! Not sure if it was a coinsidence or not .. but now the pc will not load past the windows screen it just keeps restarting .. so i cant even see the minidump problem .. Also there is no option to use SAFE MODE .. which seems odd. Only options are "Start Windows normally" or "Lauch repair" as this is a fresh OS install attempt there is no last known good configuration .. also i did notice just before one of the crashes that windows was saying it wasnt a "Genuine Version" - but i did purchase it from a store.
I have been running my computer for about four years where i made a clean instal about one year ago and it was all running great. Then all of the sudden two weeks ago my computer began crashing giving black screen, but no BSOD. This resulted in myself trying to fix it by doing a new clean instal, resetting my HDD's, renewing the battery on my motherboard. i tried updating drivers and such but nothing really seems to work.The strange thing is that yesterday i could run my pc the entire day, but when at the end of the day i tried to shut it down the computer froze. No picture no sound and no responce what so ever just like reguler. The weird thing that i see is that the fans and lights keep working. Pressing the shift five times doesn't give a sound and when it normaly freezes the music and evrything stops.
Originally Posted by gregrocker Answer: You need to boot from the Windows 7 installer and select Custom>Advanced Tools to delete, create and format your desired partitions (even one).
Make sure you click 'Format' on the partition you want to install Windows 7 to, don't just create the new partition and press 'Go' I have a Core i7 920, Gigabyte EX58-UD3R, Radeon HD 4870 512MB, 3GB DDR3 G.Skill 1333 RAM (exact specs can be seen in profile) and I'm having issues trying to install Windwos 7.
I backed up all my stuff from XP onto my external, got ready to reformat like normal tossed the Windows 7 x64 Professional disc into the drive and booted from CD. Everything worked like normal, Windows 7 is a bit different in that it doesn't run in a BIOS-type setting like XP but rather has its own little graphical install interface. Figured out what I wanted (custom install, "deleted" the old partition), and pressed go. I thought it was weird that it didnt "format" the hard drive like XP installation does, I know I can get a boot disc with 'Book and Nuke' to wipe the hard drive which I may do, but I figured since Windows 7 didn't want to format that it wasn't entirely necessary. Goes through the expanding files fine, whatever else it does on the first isntall screen, and then it gets to the restart phase.
Restart goes well, automatically shuts down and boots back up, getting to the screen that says 'Starting Windows...' and then crashes. Monitor gets the 'No Signal' message, computer stays shut off for a few seconds and then powers back up. It gives me the 'Windows crashed and recovered from an error' selection where I can choose how I want to boot (Safe Mode, Last Good Configuration, etc.) and I've tried the 'Boot like Normal' configuration and it will just continue this cycle.
The first time I tried installing Windows 7 it got past this screen, got to the portion of the installation where it automatically adjusts the resolution, and then after that it crashed. Since then I have not been able to get past the first reboot without a constant restart loop.
I tried 32-bit with the exact same results.
I have disabled all but 1 core and disabled hyperthreading (this was required to install XP beacuse I don't have a SP2 disc) to see if it worked but the same thing happened. Reset BIOS to factory defaults, same thing. Changed back to 1 core, no hyperthreading and same thing happened again. I have no extra video cards I can try but I could ask my brother if I can borrow his 23" widescreen HANNS-G monitor but unless I'm mistaken I don't think this is an issue that a monitor would fix.
I'm not the most computer-savvy person but I can work my way around. I don't know if there is a log file I can access and post here to see what the last thing that happened (the error) is, but I never get a BSOD with an error I can post, just a restart and Windows telling me there was an error and asking how I want to boot.
I had posted another forum post on the games section where I kept getting this bluescreen error when I played WoW. However today the issue occured even when I didn't run the game so I think its just a general problem now.I wiped my entire computer, reupdated all my drivers and reinstalled windows 7 and wow to try to fix the problem, but no luck. I though the problem was my memory at first, so I did several memory diagnosis tests and tried different sticks of RAM (current using 8g) and they all passed and no errors came up on the windows memory diagnosis tests. I also went to the alienware website and re-downloaded all the drivers for my M17 model, and I updated windows about 50 times.I will provide my system specs and my minidump files below for you techy's to take a look:
OS NameMicrosoft Windows 7 Professional Version6.1.7600 Build 7600 Other OS Description Not Available OS ManufacturerMicrosoft Corporation System NameNICK-PC
My PC crashes at random times, I have tried every thing I can think of to repair the problem.
AMD Phenom(tm) II X6 1090T Processor Speed: 3210 Installed RAM: 16GB MB that runs at 1600mhz NVIDIA GeForce GTX 560 Asus Crosshair IV Formula
I use kasperksy internet security.
I use a Razer Mouse and keyboard. I have 2 Screens Running. I use display fusion.
sfc /scannow (done no errors) spybot, combofix and kasperksy (scans not a thing found) Ccleaner and Glary Registry Repairs (done and fixed) All drivers updated and checked with Driver Genius Professional Edition (done) Scanned my HDD for Errors (done) Ran a Memtest for Errors (done) Reinstalled Windows (done) Driver Verifier (done) (Random BSOD errors ntoskrnl.exe and wdf01000.sys - Windows 7 Forums)
Replaced Graphic Card because of over heating but error form before I placed it. Ram is set to 1600MHz and 1.5v like the manufacturer website says.
While using my Windows 7 Ultimate x64 it occasionally crashes with BSOD and then reboots successfully. I almost always does so after resuming Windows from sleep or hibernate. It also sometimes freezes completely and I have to force reboot by powering off and on. I am attaching a zip file following the posting instructions.
I am running windows 7 Home 32bit. My Laptop is Samsung r530. The Video driver (Mobile intel 4 series 8.15.10.2302) has been repeatidly crashing since last month or so. I have just updated it as well but the problem is still there. The BSOD occurs from few minutes to several hours after booting.(NOTE: I haven't reinstalled the windows since last 1.5 years and it is the same OEM windows that came with the laptop.
My comp has been BSOD or it will just freeze up and do nothing. Only been happening since friday night. Seems to run fine but if i start to game or do anything will last for a bit and then crash or freeze. Ran memtest and my memory seemed fine. Also reinstalled my graphics card drivers but that didnt seem to
I've had a nightmare with my computer over the last week with various random crashes whilst play Rift. Now I am struggling to even get past the starting video for Skyrim as the game is freezing and crashing (with the dreaded BSOD). When I see the screen it mentions the atikmpag.sys error.
- Windows 7 x64 - Original OS installed on my PC. - OEM version - PC came pre-built and is 4 months old - Intel Core i5 2500K Sandy Bridge Processor - Asus P8P67 PRO Motherboard - 4GB PC3-10666 DDR3 Memory - Radeon HD 6870 1024MB Video Card
My computer has been randomly crashing after it goes to sleep. After trying to find answers by searching, it seems like it may have to do with a driver, but I can't understand the dmp files. I also cannot open the xml file. Attached is the message I get when I start the computer again. I tried to attach the dmp and xml files, but it says I do not have permission when I click "open" to upload them. I am running Windows 7 x64.
Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1033 Additional information about the problem: BCCode: 9f BCP1: 0000000000000003 BCP2: FFFFFA8005A5A060 BCP3: FFFFF8000403D518 BCP4: FFFFFA8003A1EAB0 OS Version: 6_1_7601 Service Pack: 1_0 Product: 256_1
Files that describe the problem: C:WindowsMinidump 52012-23134-01.dmp C:UsersFrankAppDataLocalTempWER-44195-0.sysdata.xml Read our privacy statement online: [URL] If the online privacy statement is not available, please read our privacy statement offline: C:Windowssystem32en-USerofflps.txt
recently updated from 306.97 due to a bsod. updated to 310.90 and another bsod occured several hours later. noticed that gpu temps were reaching 85-90c during high load. 40-45c during idle. wondering if it could be a temp issue.
My laptop is crashing quite frequently and has been happening several times a day for a few months now. After doing a virus check and removing programs and updating drivers, it did not solve the problem, so I decided to back up all my files and reinstall windows hoping that it would resolve the problem, but it hasn't.
Operating System Microsoft Windows 7 Home Premium 32-bit SP1 CPU
Starting earlier today, my internet randomly stopped working on my main PC, though I could still connect and it would work fine on my laptop/phone/tablet/etc. I ran a full McAfee scan which found nothing, and after a couple restarts and unplugging my modem/router, it happened again now.When I try to shut my PC down, it goes to the normal vista "Shutting down" screen, stays there for about 5 or so minutes, and then I get a BSOD.
I recently got my first crash(0x00000050) on my pretty new Asus G74SX-A1 laptop while playing Half-Life: Source and never had any other blue screens before that. After that, I restarted and went to desktop and it eventually crashed again but when it did I opened Steam(not sure if connected). After that second crash, I went and scanned my PC on safe mode and then restarted again and tried to do a system repair but right after it was done I got the second BSOD(0x0000001a).
I have not recently installed any new hardware or anything that could change my system in any way. The last time I updated my PC's hardware was when I updated my graphics card (Nvidia gtx 560m) to a beta client about 3-4 weeks ago and haven't had any problems.
I looked through some of the error dumps my self to see what was causing the problems and it says it was "ntoskrnl.exe+7f1c0" but I'm not too sure what to do.
I provided the dump files in the attachements(2 dump files zipped). Edit: I think I might have fixed it by updating my graphics card, performing hard drive error checking, and chkdsk /f. I am not totally sure if it is resolved yet and if it is not, I will post back with more information informing that it has not worked.
my computer crashes while I plug in my Huawei e1820 usb device. Stop error (0xC0000005, 0x92802703) ewusbnet.sys - address 92802703 base at92800000, datestamp4adef47f My computer has Realtek PCIe GBE Family Controller ver: 7.46.610.2011 The message I get from microsoft in my action center is to update my drivers or check if device conflicts.
a. using this device on my office computer running win XP does not cause any problems
b. connecting my home computer to my office LAN does not cause BSOD at all.Had AVG anti virus - uninstalled it & had microsoft security essentials installed.
I've sent this computer to a repair center and after diagnostics (if thats what he calls it) he said my crashes were due to my RAM. He wanted to charge me $120 to install new RAM. Instead I had him send it back and since I am computer savvy enough I installed new RAM myself.
my specs: Windows 7 Home Premium 64 bit Nvidia Geoforce GTS 360m 8GB RAM Intel Core i7 Processor 1.60Gh Just re-installed windows 7 Completely reformatted HD
I recently bought Windows 7 and installed a new RAM(my old was 2gb RAM) and upgraded to 4gb....so heres the problem,Sometimes when i plug something in my USB ports my computer randomly shutsdown..mostly after 30mins or so..
