I'm getting a BSOD when I plug in a logitech pro 9000 or a c270. The PC starts to install the drivers then I get a BSOD for ks.sys. I don't have any Western Digital software installed. Attached are the logs.
Windows 7 Enterprise
6.1.7601 Service Pack 1 Build 7601
Dell Latitude E6420
Bios: Dell A04, 5/11/2011
I have a logitech webcam that i used to use with xp and could mail a photo etc without trouble. with windows seven it tells me No microsoft outlook profiles have been created and tells me to go through user accounts and click mail and the ADD. but mail isnt on the list. a friend told me to delete outlook when i set up as i was using live mail.
View 4 Replies View RelatedI am using Texas Instruments C5515 USB Stick DSP Development Kit. Although the device does not give any error with other PC's( Win 7 -x64), when I plug it to my PC(Asus N53S Laptop-Win7-x64) crash dump occurs. The .dmp file is attached to this mail.
View 6 Replies View RelatedWhen ever i plug my xbox 360 wireless receiver device, my pc gets the blue screen and restarts itself, when its unplugged, everything is fine and no crashes?My PC spec is Windows 7 pro 32 bit, e8500 3.5ghz, ATI 6850, 4gb RAM?
View 3 Replies View Relatedwhat is the driversits quickcam expressold one Amazon.com: Logitech QuickCam Express (USB): Electronics
View 3 Replies View Relatedany idea how I can get my webcam to work in Windows 7 RC 7100 64 bits
the only way I got the drivers to install was to execute them in vista SP3 mode and I get a message like : these drivers are not made for this windows and then I click continue anyway, everything looks like it's working but once it's installed it asks me to plug-in the webcam and then Windows 7 looks for the drivers on windows update and once this is done I can't see the webcam on my computer, huh?
Got a Logitech (QuickCam) Webcam, logitech website says no drivers are available for Vista or Windows 7 and telling me do buy a new camera!
Part number is M/N: V-UBC40
i m trying to install my webcam in my pc. but it is giving me compatibility error as i have windows 7. where can i find software?
View 1 Replies View RelatedMy computer crashes whenever I plug a USB device in it. I first noticed it when I plugged in a camera, thinking it was the camera, I then tried my own flash drive which worked fine (Possibly using fat32 format); but yesterday I tried my mates flash drive (NTFS) and that crashed it, I've also tried a bunch of other flash drives around the house and they also crash my computer.I'm running windows 7 64 bit, ASUS p8z68-v pro mobo, i5 2500k, 4GB DDR3 1600MHz ripjaw, Sapphire HD6950.I have tried running memtest which passed 13 times flawlessly. I also tried running driver verifier, which seemed to really screw me over. At the start, when the windows logo first appears, it hangs a little bit and then blue screens. Luckily I had made a system repair disk the night before. I also don't know why but when I tried to start in safe mode (pressing f8 while booting) all it gave me was the option to choose which device to boot from, which I'm guessing is some sort of feature on my mobo, but I digress. So I'm guessing it's something to do with USB drivers?
View 5 Replies View RelatedWhenever i plug a USB into a port, it will simply crash with the error or the device will not appear in My Computers. However, if i plug my external hard drive ,everything seems to work.My laptop is a Windows 7 Home Premium 64 Bit, which is originally installed onto this laptop and came with it baught my laptop this year around July (OEM)
View 7 Replies View RelatedSo I built my own PC late last year and have had absolutely no problems with it whatsoever, until my brother plugged in his JVC HD GC-FM2 camera. This camera is supposed to be able to be plugged into any PC without issue and without the need to install software/drivers, but for me it blue screens. I am able to plug in other USB devices just not this camera.I'm running Windows 7 Pro 64 bit, my computer is up to date, to the best of my knowledge anyway lol. I checked event viewer and if it's
View 3 Replies View RelatedI'm looking for a driver for built-in Logitech webcam Acer Aspire 5680. I'm running Windows 7 Ultimate. I've tried this: Acer Support - Drivers & Download
Acer doesn't seem to have drivers for Windows 7. The XP/Vista drivers do not work. Windows 7 cannot find the webcam. Any ideas, folks?
I would like to download driver for Logitech mx700 code less mouse, but can't find the driver.
View 3 Replies View RelatedI am getting a BSOD whenever I try to use my webcam.
Motherboard is Asus Gene V
CPU is i5 3570k
Ram is Gskill 16gb
Custom built machine
Antivirus is windows defender
I recently bought Windows 7 and installed a new RAM(my old was 2gb RAM) and upgraded to 4gb....so heres the problem,Sometimes when i plug something in my USB ports my computer randomly shutsdown..mostly after 30mins or so..
View 1 Replies View RelatedI run windows 7 home premium and this morning for no apparent reason when I plugged in my USB stick my computer blue screened, I tried restarting it and the same thing happened, I tested my usb on a different computer and it was fine, I tired both ports on my laptop and the same thing happened on both. The same thing happened when I plugged in a different usb stick, but the usb mouse and webcam work fine.
View 1 Replies View RelatedI just plugged my PSP into my desktop and suddenly most of my inputs(save monitors) stopped working. I took the psp out out and restarted my machine, but it would not power back on.Heres what i've done so far:I have attached this psp to this machine before with no problems. After doing the steps above, I am clueless as to what could be going on. also, my mobo power light is green(implying that power IS being run to the machine). So any ideas? please let me know any other info you might need, such as specs and whatnot if that makes any difference. As I said, normally with power issues its only a few things and I just really dont see plugging my psp into my box shorting out my on button or anything like that.
View 2 Replies View RelatedOk so before this lag i used windows vista (worked fine) and now i use windows 7 and when i unplug and plug in my computer i get really bad lag and sometimes it disconnects me from my wireless network and reconnects me. Now this happens about 80% of the time and its mostly when im running a game.
Computer Specs:
Computer Name: Compaq Presario CQ50-142US
Mother Board: Winstron Model: 360B
Cpu: Intell(R) Pentium(R) Dual CPU T3200 @ 2.00GHz
Ram: 3072 MBs
Graphics Card: Mobile Intel(R) Express Chipset Family
If you need any more info just leave a response saying so and ill post what i can.
My webcam is causing my pc to reboot with the BSOD, every time I exit the webcam this happens. I have searched around with google and found out that this happens alot and can be diagnosed with Memory Test and Verifier, I have tried these two methods and it did not work for me.
View 1 Replies View Relatedmy PC freezes when I plug in headphones and sometimes front panel USB devices. I had this problem previously on my old PC build but have upgraded my motherboard, CPU, GPU, case, and power supply since then (basically a new computer) only to have the same problem still... I have rebuilt the computer twice and checked all wires and motherboard to make sure nothing is grounding out. I have also tried different wall outlets in my house to eliminate the possibility of electrical problems from the outlet I was using. Not only am I not able to use my front panel connections, but also my comp runs very choppy after it freezes from plugging in devices and I am forced to restart my comp several times to get it working correctly again.
View 8 Replies View RelatedWhenever I plug in any USB device, the monitor will go blank, but the case fans and lights will continue operating. The computer remains like this until I hold down the power button to turn it off and then restart it. It will restart fine. In addition to the monitor going blank, all power is turned off from USB devices (e.g. optical mouse light turns off).This occurs probably about 25% of the time I plug a USB device in (sometimes nothing happens, as should be).It does not mater which port I use. It's happened with rear ports, a hub wired to a rear port, front case ports (plugged into motherboard USB pins), or a PCI USB hub.
I've looked extensively for solutions and can't find any. I checked my motherboard multiple times for swollen capacitors and have not found any.Today (and never before) when I plugged a mouse in, the same issue occurred, but the monitor turned back on about two seconds later, and a pop-up notified me of drivers successfully being installed. (I didn't notice whether USB power was cut) This makes me think that the computer is adjusting the display (as it does when a program requests administrative permission and the screen sometimes goes blank) but for some reason does not come back from it. There really is no indication that Windows stops. I never get a BSOD.Operating System: Windows 7 64-bit, regularly updatedDisplay Adapter: Nvidia GeForce 9600 GSO (756MB)
where my notebook starts to stutter after coming out of hibernate whenever the power is plugged in. The mouse doesn't move, the audio goes out, videos stop, and sometimes I get a black screen that disappears in ten seconds. Sometimes after the black screen I get a message saying my video driver recovered. I am running a nVidia 8600M GT with up-to-date drivers. The problems usually resolve if I restart but it's really irritating that I can't get out of hibernate without this stuttering. Switching back to Vista also fixes it. I've tried reinstalling drivers and reformatting with a clean install of Windows 7 neither of which helped. I didn't have this problem with Vista although I had another power issue in Vista (which I still have with 7) where if I put my computer into hibernate with the power plugged in, the computer wouldn't start again until I unplug it and take out the battery.
View 5 Replies View RelatedThis event happens maybe once every 20 plug-in attemps and only when I'm slightly up or down from a straight push in. The device doesn't matter. The port in question is one of four on the front panel of the case. The rebooting only happens with one port. Never had a problem with the other three. I haven't pulled the front of the case because it happens so infrequently.
View 5 Replies View RelatedI was wondering, I'm very OCD and I like to keep my computer clean of any unwanted files.When you plug in a USB does it save any files/hidden files to your computer HDD?When you clean all/format a USB does it save any backups or anything to your computer HDD?I'm just quite autistic and I want to know what happends when you plug USBs in
View 4 Replies View RelatedI have a my HTPC plugged into a 5-port switch along with my Xbox 360, PS3, and U-Verse TV box. Naturally, all 5 ports are being used with line 1 going into my router. There are 3 other computers in my house plugged directly into my router.My problem is that my network ceases to work whenever I plug in the switch. I am neither able to access the internet or view any other computer on my network for file/printer sharing. Running ipconfig shows that I have no LAN/internet connection. If I unplug the switch and plug in the components individually, then everything works normally.I have tried 3 different switches but I am getting the same result. It is very inconvenient to have to manually unplug and plug in my various game consoles and TV box in order to enable them to access the internet.
View 9 Replies View Relatedplugging my vga cable from my computer to tv but signal drops
View 2 Replies View RelatedDual Core Windows 7 Pro 64 bit Toshiba laptop. My daughter was working on a Power Point project for school. She went to plug in her flash drive and it didn�t seem to load the drive up. She unplugged it and then plugged it back in. We got a BSOD. We restarted it and it BSOD again. I tried some general troubleshooting, including restoring it to a previous version, and now cannot get into Windows at all. Not even in safe mode. Now I am getting multiple BSODs.
Currently I am seeing these BSODs:
I am getting one when just trying to start and run windows I am getting a BSOD about memory management.
If I try to go into safe mode it loads the files and then I get a BSOD regarding the fbwf.sys. Using the Windows 7 disc I have been able to get to the System Recovery Options. It finds my install and then blue screens with IRQL_NOT_LESS_OR_EQUAL or Driver_IRQL_NOT_LESS_OR_EQUAL even before it gets to finding my install.
Other BSODs I know I have seen are regarding the Ntfs.Sys and PAGE_FAULT_IN_NONPAGED_AREA.
Event ID 11 (Warning) = Disk Controller
Device = SanDisk Cruzer, 8GB, Formatted FAT32
All USB Ports affected.
The device works perfectly.
how to eliminate the warning ?
One desktop PC running Windows 7 Home EditionOne laptop also running Windows 7 Home EditionMy modem is a Thomson TG782TMy printer is an Epson STYLUS Photo RX610I currently print by swapping the printers USB cable to either my desktop or the laptop, no problems.My desktop is cabled to the modem, my laptop is wireless.My modem has a USB port, to which I can successfully plug in a USB memory stick, and use from both the PC and the laptop.I have tried plugging the printer USB cable into the modem and, in Control Panel, installing a new printer using 192.168.1.253 address.The printer appears to have installed ok, but all attempts to print to it have been unsuccessful
View 4 Replies View RelatedI was wondering if anyone is familiar with a method to enable sounds for when you plug in or remove a charger connected to your laptop. It is not a problem with my pc, but is an option that is not available for me which i would like to install to let me know if i accidentally unplugged the charger, particularly if I'm working on a full-screen feature. I have Windows 7 home Premium 32-bit installed.
View 2 Replies View Relatedwhen I plug my HMDI cable into my TV from my PC I lose my PV monitor signal
View 1 Replies View Related