I have 2 internal and 3 external HDD's that I want to monitor. I have lost HDD's in the past and it has been a terrific PAIN! and while I know that monitoring software wont prevent this altogether.
View 2 RepliesI was planning on going dual screen and I wanted a nice graphics card for gaming and visual design (I use Photoshop and CAD). I am thinking about getting two ASUS VW246H 24" (Newegg.com - 24-236) and I was considering the Radeon Sapphire HD 7870 (Newegg.com - SAPPHIRE Radeon HD 7870 GHz Edition OC 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card (11199-03-20G). Will I require two of these graphics cards? I was only planning on getting one.
View 1 Replies View RelatedIn my current system I have a 2TB boot drive and five 2TB drives in a RAID5 setup.A friend of mine recently added an SSD drive to his system and is using it for the Windows swap file and as a scratch drive for video rendering. I was about to order one and do the same thing when I got to wondering if there would be a benefit from installing Windows on the SSD and just moving the "Program Files" and "Users" folders to the RAID so that the SSD is only used for the O.S.
View 9 Replies View RelatedNo mail server client came with Windows 7, that i can find, any recommendations?
View 7 Replies View RelatedI recently was doing 'maintenance' on my network and during the process, decided to upgrade the firmware on my routers/APs. All went well except that my trusty old BEFSR41 didn't survive. I tried the known fixes, but no response.So, I'm asking for recommendations. I do have wireless covered with a WAP54G, but it may be time to update that as well.Features I want are good security (inbound and outbound MAC filtering, IP Range limiting, port limiting, etc.), speed and reliability. I'm not opposed to a wireless router with ethernet ports (at least 4), but I would like the ability to turn the wireless aspect off, since I don't use it that much (at the moment).I have several machines on site, connected to an 8 port gigabit switch, which was connected to the BEFSR41, which was connected to a cable modem. Netgear is not a preferred solution. At some point, I plan to connect my TV, if that is a consideration in choice. OK, I'm rambling now.
View 7 Replies View Relatedmy Netgear wireless card won't work. It won't work if I have more than 2 GBs of RAM. Which is stupid. I've already looked everywhere and the only answer I could get out of Netgear was "Sorry but we're working on an update". Screw them.Anyway, I'm looking to buy another one because I hate running a 30 ft ethernet cable through the house so I can get internet. I really don't want to get bummed again so if you guys have an recommendations that would work with Windows 7 Pro 64-bit WITH 16 GBs OF RAM (lol)
View 2 Replies View RelatedI have only about 100GB left on my mirrored RAID on my desktop and I am looking for a NAS. I have been looking at this Synology one and this Buffalo one. I like the Buffalo one because it comes with 12TB and depending on the drives may be cheaper.
View 4 Replies View RelatedI am looking for a small cloud based system that would allow the following activities:Finances (Buy Price, Sell Price, Profit etc..) Notes Section for people to share their thoughts Plus and other features that may be possible.I don't mind if it is hosted on a secure site or hosted on a server at someones home and made available to others (Would need making secure somehow).
View 5 Replies View RelatedI am on Windows 7 Professional, 64 bit.i7 processor with 12 gb ram 10k rpm Sata 3 boot drive Graphic Designer using Photoshop and Illustrator, and a variety of other programs.I have used Memeo Backup Pro in the past for backing up my files INSTANTLY upon saving the file.... I liked that it did that. Not into waiting till the end of the day for a scheduled backup to run; I've lost too many files in the past due to corruption after working on them for an hour or less....I would lose a LOT of productivity if I got hosed after working on a complex Adobe Illustrator or Photoshop file if it crashed after working on it for even a half hour.I save often, and Memeo saves a backup to my predetermined destination drive instantly. HOWEVER.... Memeo is buggy as heck and it has screwed with programs and caused Windows 7 functionality problems....So... I am wanting to try another, similar backup program that might have better user reviews. Can you help? I tried a demo of Live Backups and it sucked... couldn't even get it to work after setting up the parameters ....
View 2 Replies View RelatedAny recommendations on Fast Drives that can save large files 8+ gigs in a matter of seconds. I have a USB 3.0 drive, even though it's connected to a 2.0 port, I'd still prefer something more faster, besides I want it to be internal.
View 4 Replies View RelatedI have a three monitor set up. Whenever I open up a browser, either internet explorer or google chrome on monitors 2 and 3, after a few seconds it automatically drags my browser into my main monitor(monitor 1, where my start button and status bar is located)
View 3 Replies View RelatedI have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu.Is there a way to change which monitor is the main monitor without having access to the current main monitor?
View 5 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
This computer is running an ATI Radeon HD 2400 Pro. It does support dual monitors...(I've had dual monitors active on this card before, but never on Windows 7.) But since installing windows 7, I can't even get it to detect the second monitor. I want to run the setup with the CRT as the primary monitor and the HD as the secondary.
View 7 Replies View RelatedI recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I'm using a television (32p) as a second monitor in extended mode so that I can watch a movie in the TV and play a game in the monitor (this was my main goal). Monitor and TV lays in two different ambients, both connected to the same pc, one by normal VGA cable and the other by HDMI. I managed to differentiate the audio output so that VLC player sends it's audio to the HDMI (so that only the TV plays it) and the rest of system sounds, media players and games outputs to the speakers (basically only the VLC audio is directed to another output device). I reached my goal so that I can watch a movie fullscreen in the TV and play a game in the monitor fullscreen too without any interference from one another (nor audio or video).
The thing is, because I have the TV in another ambient I can't actually see what's going on in it, as I just "throw" the VLC window to the TV from my main monitor. And here's the question: There's a way to see the TV's desktop in my monitor? Without having to set it as main monitor so to not really switch between desktops.. The perfect thing would be if I could see the TV's desktop in a window like in remote desktops applications.
I have AT&T DSL and it just drops out, I have a 2 wire router and the DSL and Internet lights will flash red when it drops, I have had this problem for almost a year and AT&T will run a useless test and tell me everything is fine. I have searched for 3 days trying to find a Broad Band Monitor to let me know when it drops and for how long, also how many times while I am at work, or just not on the PC.
View 2 Replies View Relatedi just got a dell optiplex 755 running windows 7 and i tried hooking it up to my tv to use as a monitor and it starts up and goes through untill it says starting windows (where its supposed to take me to log in screen) and then my tv just says not support but if i start in safe mode it goes through i just dont understand why it doesnt work i even tried lowering the resolution then hooked it up again and same thing its driving me crazy why it wont work i have a 32" HCT tv
oh also im using VGA to hook up since computer doesnt have hdmi out
Computer was slow and seemed to have too many things running all the time, freezing, etc. I ran Malwarebytes and Webroot Secure Anywhere; they didn't find any problems.So restored it to a week earlier then everything ran just fine for a few days. Now it seems to be doing it again. I went to Task Manager and found several items I can not clearly identify after searching online for them:Monitor.exe *32?
View 3 Replies View RelatedThis may seem like an elementary question, but is it possible to run 2 PC's on 1 monitor (seperately of course)? If so, how would it be done since there is only one hookup to the monitor? Some sort of splitter?
View 2 Replies View RelatedI just d/led windows 7 RC and im having problems connecting to my 2nd monitor, the screen on my laptop is working just fine.
i have a HP - Pavilion Laptop with AMD Turion™ X2 RM-75 Dual-Core Mobile Processor with NVIDIA GeForce 8200M graphics
my monitor is a Samsung t240 HD
In device manager
Monitor is showing - Generic Non-Pnp Monitor
Display is showing Standard VGA Graphics Adapter
im not experienced with this kind of stuff at all.
Im using my gtx on my samsung led monitor And some times I use it on my 32'' led as htpc or sometimes play games on it My question is will the card heat up from this setting ? I only use one monitor and other one is turned off but the cables remain plugged
View 1 Replies View RelatedAs the topic suggests, which one is better? LCD TV or LCD monitor?
Also, why in the world do LCD TV's have a lifespan in hours (ex 60,000 hours) associated with them?
What would happen after the lifespan expires?
Sorry if these are n00by questions but considering I am just now gonna shift to LCD monitor from my 2002 15" CRT, yeah I'm a certified n00b!
I use my TV as my desktop through an HDMI cable from TV to my Tower but because of lag is there any better way to set it up i've tried VGA that didn't make a difference so please could k of lag i know it's the tv as i tried laptop to tv would there be any settings on tv to stop this?
View 4 Replies View RelatedYou have multiple monitors and even a TV hooked up to you PC.
Again if your like me you hate that MC locks the mouse so that you cant use your PC while MC has the floor.
Well Not Anymore...
I have found the best and most important tool I have for MC
and its called The Maxifer and yes its FREE
It will launch MC to what ever screen you choose Full Screen with out the Lock Down.
So you will be able to use you PC and run MC full Screen!
It just runs in the taskbar and with a Rt Click will make all your dreams come true!
whei i open my computer i cant see anything in monitor.what can i do?
View 1 Replies View RelatedI really love native resolution, but you can only go up to 1024x768 with a VGA monitor. Does anyone know where I could get a DVI monitor for, say, under $150 thats 15" or above?
View 9 Replies View RelatedWhen I connect my laptop to my LCD TV I can see windows 7 starting to load on the TV screen. As soon as Windows has installed the TV is not visible and windows can't detect it. Also some icons dissapear off my laptop screen.
View 1 Replies View RelatedSeems like whenever I use this specific monitor this BSOD occurs or maybeit's cause I have internet. Well, I got this issue after I built my computer and borrowed my friend's monitor and got internet, but whenever I don't use this monitor or this specific internet I do not come across this problem.
View 6 Replies View RelatedI have a dual monitor setup and my TV in another room as the third monitor.
Is there a way to set the two actual monitors up with a shared wallpaper and a completely separate wallpaper for the third monitor (TV)?
Or even a separate wallpaper for each screen would work...