In my current system I have a 2TB boot drive and five 2TB drives in a RAID5 setup.A friend of mine recently added an SSD drive to his system and is using it for the Windows swap file and as a scratch drive for video rendering. I was about to order one and do the same thing when I got to wondering if there would be a benefit from installing Windows on the SSD and just moving the "Program Files" and "Users" folders to the RAID so that the SSD is only used for the O.S.
I was planning on going dual screen and I wanted a nice graphics card for gaming and visual design (I use Photoshop and CAD). I am thinking about getting two ASUS VW246H 24" (Newegg.com - 24-236) and I was considering the Radeon Sapphire HD 7870 (Newegg.com - SAPPHIRE Radeon HD 7870 GHz Edition OC 2GB 256-bit GDDR5 PCI Express 3.0 x16 HDCP Ready CrossFireX Support Video Card (11199-03-20G). Will I require two of these graphics cards? I was only planning on getting one.
I have 2 internal and 3 external HDD's that I want to monitor. I have lost HDD's in the past and it has been a terrific PAIN! and while I know that monitoring software wont prevent this altogether.
I recently was doing 'maintenance' on my network and during the process, decided to upgrade the firmware on my routers/APs. All went well except that my trusty old BEFSR41 didn't survive. I tried the known fixes, but no response.So, I'm asking for recommendations. I do have wireless covered with a WAP54G, but it may be time to update that as well.Features I want are good security (inbound and outbound MAC filtering, IP Range limiting, port limiting, etc.), speed and reliability. I'm not opposed to a wireless router with ethernet ports (at least 4), but I would like the ability to turn the wireless aspect off, since I don't use it that much (at the moment).I have several machines on site, connected to an 8 port gigabit switch, which was connected to the BEFSR41, which was connected to a cable modem. Netgear is not a preferred solution. At some point, I plan to connect my TV, if that is a consideration in choice. OK, I'm rambling now.
my Netgear wireless card won't work. It won't work if I have more than 2 GBs of RAM. Which is stupid. I've already looked everywhere and the only answer I could get out of Netgear was "Sorry but we're working on an update". Screw them.Anyway, I'm looking to buy another one because I hate running a 30 ft ethernet cable through the house so I can get internet. I really don't want to get bummed again so if you guys have an recommendations that would work with Windows 7 Pro 64-bit WITH 16 GBs OF RAM (lol)
I have only about 100GB left on my mirrored RAID on my desktop and I am looking for a NAS. I have been looking at this Synology one and this Buffalo one. I like the Buffalo one because it comes with 12TB and depending on the drives may be cheaper.
I am looking for a small cloud based system that would allow the following activities:Finances (Buy Price, Sell Price, Profit etc..) Notes Section for people to share their thoughts Plus and other features that may be possible.I don't mind if it is hosted on a secure site or hosted on a server at someones home and made available to others (Would need making secure somehow).
I am on Windows 7 Professional, 64 bit.i7 processor with 12 gb ram 10k rpm Sata 3 boot drive Graphic Designer using Photoshop and Illustrator, and a variety of other programs.I have used Memeo Backup Pro in the past for backing up my files INSTANTLY upon saving the file.... I liked that it did that. Not into waiting till the end of the day for a scheduled backup to run; I've lost too many files in the past due to corruption after working on them for an hour or less....I would lose a LOT of productivity if I got hosed after working on a complex Adobe Illustrator or Photoshop file if it crashed after working on it for even a half hour.I save often, and Memeo saves a backup to my predetermined destination drive instantly. HOWEVER.... Memeo is buggy as heck and it has screwed with programs and caused Windows 7 functionality problems....So... I am wanting to try another, similar backup program that might have better user reviews. Can you help? I tried a demo of Live Backups and it sucked... couldn't even get it to work after setting up the parameters ....
Any recommendations on Fast Drives that can save large files 8+ gigs in a matter of seconds. I have a USB 3.0 drive, even though it's connected to a 2.0 port, I'd still prefer something more faster, besides I want it to be internal.
After I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
Per microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
I've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.
I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.
However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:
Taking all but 1 stick of ram out and the graphics card. Reseting the bios to default Installing again without rebooting after error. using cmd to select the right partition
First off this is a newly built computer, all fresh components. aftercleaning/activating the hdd via shift +f10 at Windows 7 setup,(which took me a day to figure out) i was very excited to see my hdd available for Windows 7 installation. as i proceed windows does its thing, after installing its time for the first restart. it restarts right back to the initial windows 7 setup ive done a lot of research, and majority of the problems seem to be the boot priority in bios. so i made sure that it was usb-hdd, then hard drive. (Windows 7 on flash drive for me, no dvd burner available). still the same thing, right back to initial setup. i tried maybe to remove the flash drive during the 10 second countdown to restart, but when it restarts, the windows splash screen comes up and then blue screens and restarts real quick. cant see what the error is on bsodthere have been a couple different start up issues, "windows did not start properly" "select version of windows to start from" (or something to that effect.) but its all the same outcome. windows 7 just wont finish installation
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
How do I install a Super Multi Drive to a mini computer HP 110? I have the device and the installation disk, however, the computer does not seem to be detecting it or providing an installation wizard for me to proceed.
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
NT Kernel & System rises to top of list in task manager and then just totally stops installs from proceeding. I have fought NT Kernel & System on 3 computers running Win 7 x64 ever since Win 7 has been out. No one yet that I know of has been able to solve the issue. I now need to install Java and can't because of NT Kernel & System stops it. I have tried everything on every forum and sites l find with Google searches. Nothing has worked yet.
I am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
I get as far as connecting USB - Windows acknowledges the connection but then never finishes the installation. Downloading and installing a driver from HP site didn't help.Know that I had originally following HP's instructions and attempted install w/o CD and with the printer USB connected during first installation. This failed same as all subsequent installs. I'm also running XP mode on this machine but had not started XP at the time of printer install.
I have recently finished building my computer and brought a copy of windows 7 (home premium) 64bit to go with it. But when I try to install I never get past "collecting information" where I am being asked to "Select A Driver To Install" as a driver for my "DVD Device" is missing (apparently). I assumed that the driver I needed would be on my motherboard driver disk. I clicked the disk and told it to "rescan" and it only said "There's no device drivers were found. Make sure that the installation media contains the correct drivers". When I navigate directly to the sata,raid & ide drivers sometimes I get a: nVidia nForce Serial ATA Controller on the screen but when I click on that it says the same thing after about 10 seconds or tells me it cannot install and I need to get a new driver from my distributor (I have tried the drivers of the Asus website but the same result). What do I do?
During the installation process of Windows 7 it is possible to load drivers, e.g. the downloaded SATA, LAN and Graphics drivers for a specific motherboard (MoBo ASUS P7P55D).However, these files are compressed zip files and Unzipping delivers a set of folders with in each a number of files. Which are the device drivers?
I plan on reformatting Windows 7 x64 due to some hardware issues. Basically, I would like to be able to have things like Windows 7 settings, themes, ect imported. Any tips on how to do this? I do have separate partitions/harddrives to backup files, program data, ect.
My Acer 7736Z-4809 laptop (pre-installed w/ Windows 7 Home Premium 64bit, so I don't have the Windows 7 CD) was recently hit with a virus. I constantly got the BSOD "iaStor.sys" and a black screen. Startup Repair at first couldn't complete repair, but when I tried again, it found no errors. Tried System Restore to no avail. Was able to do a System Image Recovery using a backup on an external HD, but none of the programs worked (wanted to use Ad-Aware and Spybot to eliminate the virus). When I clicked on programs on the desktop or Start menu, nothing happened, didn't even get an "Open with." Even in Safe Mode, none of the programs worked. I checked the Task Mgr, and explorer.exe was still there, but RAID wasn't. Went to Control Panel Programs to uninstall/repair programs, but got message that programs seemed to be already uninstalled...it was like the programs weren't even recognized. Once in awhile when I clicked on IE8 in Windows Explorer (not via desktop shortcut or Start menu), IE8 actually opened, so I downloaded Hijack This and Avast anti-virus, but when I tried to install them, I got the msg: "Installation must be on a local hard drive."
Continued to get the "iaStor.sys" BSOD. I read to run Verifier and disable it, so I tried that (not sure if that made things worse). Tried to do another System Image Recovery, but this time it couldn't recognize the backup on the ext HD. Tried Startup Repair, and it couldn't complete repair. Went to Recovery Management to reset the OS, but my User ID(?) couldn't be found. Decided to do a Factory Install - during "Setup is preparing your computer for first use" I got the error msg: "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click 'OK' to restart the computer, and then restart the installation." Every time I try to restart it, I get the same error msg.
I have an OLD computer with a 2.4 GHz processor and 1 GB ram, running XP 32 bit. I wanted to upgrade to Windows 7, So I tried to install 32 bit windows 7, knowing my computer couldn't handle 64 bit. However, at the end, it simply told me "Installation Failed" and reverted to XP, with all my files. I tried multiple times, then I tried installing 64 bit windows 7, and surprisingly, it worked. However, it is laggy beyond belief, so I tried installing 32 bit again. Again the installation failed. Now I'm thinking of reverting BACK to XP.
