WMDC Says Dont Have Permissions To Change Settings?
Mar 8, 2011
am trying to use the WMDC to get some files off my Winmo 6.1 phone. The display is shot. When connected to the PC, it wont just show up as a drive because in the device manager it is a USB mass storage device with this error this device cannot start.(Code10) I cant use active sync on XP because it doesnt allow the connection until a question about duplicate files check box is checked, but I cant see it. A VZW tech told me that WMDC will connect to the phone without that problem. But when I check "allow data connections on device when connected to PC", it tells me I dont have sufficient permissions. I am the Administrator on this computer (in user accounts, my user account shows as a standard account and wont let me change it).
View 1 Replies
ADVERTISEMENT
Jul 11, 2012
I need to change permissions so I can delete my default "Dropbox" folder from my C drive. I can't figure this out; the "objects" menus and all that are beyond me. If I try to delete it says I have to change permissions....I tried, but I don't get it at all. Can someone just give me a step-by-step? I know it's complicated, because you can't see the way it was set up originally by the guy who built my computer....I just need to delete that folder so I can start over fresh!
View 2 Replies
View Related
Dec 25, 2010
When I first installed Windows 7 a few days back, I didnt do anything to change any permissions, but I have had several occurances where Windows 7 stops me from installing or even startring a program. I tried to install an image of the message here, but Im not sure how that is done.
View 5 Replies
View Related
Apr 5, 2011
I probably did a dump thing (only the 100,000th in my lifetime!). I backed up my working folders on my XP desktop into a zip file where the options were set to save the relative path of each file. I then extracted the backup zip file to my Win 7 laptop, not remembering that Win 7's folder structure is different than XP's. So I wound up with a new folder on the laptop "Documents and Settings", with all the stuff that was under it. So I was going to open it, move the files from (XP's) My Documents to (Win 7's) Documents. . . but there's just a weeeeeee problem: The Documents and Settings folder is LOCKED!!I have gone to the Security tab under properties and changed the permissions to allow EVERYONE full access, and it still denies me access. I downloaded Unlocker, but it doesn't show up in the menu when I right click the folder, so I have no idea what it's good for/how to use it. I can't delete it because that's not a choice on the menu when you right-click it.BTW, yesterday it had a padlock icon overlay on it. Today it has a shortcut arrow. I also have no idea why it's showing as a shortcut.
View 9 Replies
View Related
Oct 8, 2010
Trying to change the permissions for:HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionControl Paneldon�t load It denies me,I'm logged in under Administrator.
View 5 Replies
View Related
Dec 13, 2009
I have a Dell Axim X5, using Windows Mobile 2003. I have Windows 7 Ultimate x64. Before that, I was using Vista Ultimate x64, and had no problem connecting my Axim to my computer.
Now, I am trying to make my Axim work with Windows 7. After much hassle, I successfully installed the drivers. The Axim now shows up in: My Computer, Devices and Printer, and the Device Manager, all without any problems, errors, or yellow exclamation points. All says the device is "working properly."
However, when I open Sync Center, it does not see any device. Also, when I click on Windows Mobile Device Center, the application does not launch. The only thing that comes up is the Connection Settings screen, shown here:
Neither Sync Center nor WMDC seem to connect. Although wmdcBase.exe is running according to the Task Manager.
I have tried: uninstalling and reinstalling WMDC, updating via Windows Update, trying a new USB port, uninstalling and reinstalling the device drivers for the Dell Axim.
View 1 Replies
View Related
Mar 2, 2012
Today I dual booted Windows 7 and Windows 8. Everything was fine, until I decided I wanted to point my music collection in Win8 to my Win7 music folder (turns out you can't do this right now anyway in the music app). I wanted to make sure that win8 didn't screw with any files so I changed the whole drive permissions in Win8 to have read access, but not write access of my Win7 drive. I did the vice versa for Win7.When I restarted my system I got a "windows created a temporary paging file..." error message and figured out its because I screwed with my file permissions. To fix it I just need to change the permissions back, however now they are all greyed out (even in the (hidden) Administrator account) and I can't figure out how to change the permissions back.
View 1 Replies
View Related
Feb 7, 2011
i needed to pawn my laptop for a short time and didnt want my files to be viewed by anyone while it was not in my possesion, so what i did i changed the file permissions of my c: drive so that only admin had fulll control and no one else. well now i cant access my c: drive with my admin accrt. nor will it let me change the file permissions either. also a hand full of other things will not work such as the internet explorer icon on the task bar or start menu but i can open i.e. from the recently viewd submenu from the i.e. icon on the start menu. also i can open files on my c: drive from any old shortcut icons i had left on my desktop but i cant acces them directly from explorer. so i found some work arounds but really need to get full control of my h/d.
View 6 Replies
View Related
Jan 9, 2012
Basically my cousin accidentally thought my new computer was his.. and he set it up all in his name and what not (lets go with the name STEVE).. I basically have changed the names of the login Everytime I goto Network..then click on BOB (let's just say that's my name), I see two things listed. Under Users.MY stupid cousin's name (STEVE) and then "public." When I try and change the folder's name to MY name (Bob), I always get this message:You need permission to perform this action You require permission from Administrators to make changes to this folder.I've already gone to control panel, User Accounts, changed the name to BOB and made it the Administrator.
View 4 Replies
View Related
Feb 5, 2012
I got a computer from my work and as u know every thing is blocked and i don't have any permissions .can't install apps , can't update windows , can't do any thing ! is there any way that i can bypass admins control and change my permissions to be able to install apps ? is there a file responsible for that process that i can use Hiren's Boot CD to modify or change any thing in it cuz i almost have no permissions to modify any thing ?
OS is Windows 7 Enterprise , NO SP installed
View 5 Replies
View Related
Feb 9, 2012
All this started when I just wanted to change the way the clock looked to a custom one.
I go to the Windows Sidebar folder to locate the Gadgets folder for the clocks, and I try to make backups of a few of the files in the clocks folder by moving some of them to a new folder I created on the desktop. I cannot move them, access denied. I try taking ownership of the folder, cannot do it, access denied. I try changing the permissions, cannot do it, the boxes you can tick are grayed out. Long story short, I tried backing out of all the folders, trying to take ownership and change permissions all the way back to the Program Files folder itself to no avail. It seems if it is a default Windows folder I cannot mess with it in anyway; this also seems to be the case with my McAfee folder, but something that is less of a risk to change, like my Zune folder, I can change around no problem.
Quick rundown, I am using Windows 7 Ultimate edition, this is my only account for the computer, and it is an admin account. I have tried using several different "Take Ownership" downloads, including the one suggested on this site, but it does not work for the Window folders. "Take Ownership" won't even show up if I right-click on the folder. I know the Take Ownership mod is installed correctly, because it will popup for something that is not a default folder, like my Zune folder. .
View 5 Replies
View Related
Feb 23, 2012
How do I change the permissions for the administrator account to Full control so that I do not get the "access is denied" message when trying to perform certain functions?
View 3 Replies
View Related
Jan 5, 2013
Had a strange issue on one of my clients business PCs. These 2 PC's are setup each year at a kiosk for tax preparation. They were working perfectly last year and were boxed up and stored for most of the year. Today I had to get the kiosk and 2 PC ad hoc network all setup and working again. Should have been easy as pie...But once I had them connected I couldnt attach to any shares from the "client" to the "server" (both running Windows 7). The "server" in this ad hoc had all of the shares from last year not shared anymore. It has to have approx 20 folders shared in order for their apps to work.I am suspecting that during the off season it was plugged into a different network and might have had the workgroup changed and then changed back before I arrived. Can anyone tell me if a workgroup name change would in fact change/delete the share permissions? I have googled and searched this site, but all I get are how to change a workgroup name or how to change share permissions.I know how to do that
View 2 Replies
View Related
Mar 30, 2012
The other day, I tried to edit my registry editor(regedit) because I wanted to enable something. When I do anything with my regedit, it comes up with a error messsage.
View 2 Replies
View Related
May 3, 2012
I'm running windows 7 ultimate and am trying to install some software off of a secure server at a remote location to my hard drive. The install fails every time because the my user account (an administrator) does not have full write permissions to the program files directory. I have tried taking ownership of the directory, but I don't have permission to change it from TrustedInstaller.
I turned on the built in administrator account and logged in through that, but there is no difference in permission level. When I attempt to change the permission level I get the following error dialog box: An error occurred while applying security information to:
C:Program Files (x86)
Access is denied
Then the following: Unable to save permission changes on Program Files (x86)Access is denied. I've been fighting with this for three days now and I consider myself pretty adept at typical windows bs. Yes, my UAC is set all the way down. That was the first thing I turned off. I also tried shutting down virus protection and firewalls to no avail. Any help here would be awesome since none of the posts I've been able to find say what to do when the admin can't take control from TrustedInstaller.
View 9 Replies
View Related
Sep 8, 2011
I change windows xp to windows 7 now webcam dont work , how to intal back ????
View 1 Replies
View Related
Mar 25, 2011
I sign into an emulator for work and have to use my F keys a lot.I hate having to hold down the FN key at the bottom of the keyboard just to use my keys. Does anyone know how to turn off the settings of the F keys and use them as they are mapped on my emulator? My laptop is an HP Pavilion dv6
View 3 Replies
View Related
Aug 30, 2010
How would I go about changing the set up of my second drive (It will have Win 7 clean install on it) from Status "None", Type "Logical" to "System" and "Primary" also what should the setting be for the balance of the drive that will contain directories and etc? I have Easeus Partition Master and Partition Wizard but I never did a partition before.
View 4 Replies
View Related
Nov 10, 2010
i use BitLord to download random stuff anyways the Downloads Folder Shows up like this : Now when i open Nero up it shows this Weird thing is if i hover over the folder from normal window it says the Downloads folder is only 800mb (as it is only showing me one item) yet from Nero it says the folder is over 9 Gigs. Im set as Owner of the folder and i have all permissions set for me however i am still unable to see these files outside of nero and i don't know why.When i go and try to change the permissions on the folders (the locked ones) windows says the files/folders doesn't exist...
View 1 Replies
View Related
Dec 2, 2012
I bring it up but it will notwork. I have windows 7.
View 2 Replies
View Related
Feb 7, 2012
have 1 computer operating 7 ultimate and 1 operating home premium cannot connect to the laptop under home premium. On the laptop when i go into change homegroup settings all boxes except printers are un-ticked. When I tick all the boxes then 'save changes' all seems ok until I go into change homegroup settings again I find all the boxes except printers are un-ticked again. I can't seem to keep these boxes ticked - I suspect this is why I cant access the laptop within the homegroup.
View 3 Replies
View Related
Nov 14, 2012
I can hover over the link but I do not get the cursor to change into a "fist" it remains as it would if writing a Word document.I cannot recall changing settings and I have searched through Yahoo help but cannot seem to find a solution. I though perhaps that it could be that I have e-mails in plain text not html, but cannot find where to check. However I do get images in e-mails and so don't think it is plain text.How can I restore the function to be able to click hyperlinks? I am running Windows 7, 64 bit version, and Yahoo Mail classic.
View 2 Replies
View Related
May 5, 2011
On my Mac there is a setting to change the scroll bar so it jumps to the spot I click instead of moving page down or up. How can I do this in Windows 7?
View 9 Replies
View Related
Dec 21, 2011
how can i change my security sittings coz its sopping me from installing any exe file and its not showing any thing when i dubble click on an exe file Exadobe setup file) its like hidding exe file and block it from working ASAP coz i need to install the Adobe to start working on my progect
View 9 Replies
View Related
Jul 15, 2009
I cant seem to find the boot file in windows 7 build 7600,
i'm dual booting, when I installed 7, 7 was C: and vista became drive d:
but i have storage hard drive which is always drive d, so I made vista drive f
so how can I fix the boot file in 7 to change the drive letter for vista install?
View 4 Replies
View Related
Jul 13, 2012
I am disable Administrtor accaunt and now I has Standard user, I can't change some settings on my computer now...How to I enable windows bild-accaunt Administrator and to my user be Administrator and than disable administrator accaunt
View 6 Replies
View Related
Sep 22, 2011
I'm currently running Windows 7 home premium 64 bit and have a Crucial M4 SSD on the way!I will be doing an image. What are the settings I need to change in Windows 7 to get the most out of this SSD?
View 9 Replies
View Related
Jan 23, 2012
How to change language from Japanese to English in windows 7.
View 1 Replies
View Related
Nov 2, 2011
The laptop is an Acer Aspire 5732Z, the specs are:
CPU - T4400
RAM - 3.00 GB
OS - Windows 7 Home Premium 64 bit, no SP1 yet
the hard drive is about 250gb, with most of that space free, and just 1 visible partition.
It has 2 problems
1) It takes a long time to boot up, it used to be excessively slow in windows but removing Norton 360 seems to have solved that part. I can time it if needed.
2) A lot of the programs on the system are blocked by windows security, causing the orange "These files can't be opened" error message to pop up.
These include gfxUI.exe (the UI for the onboard graphics), the installer for Crap Cleaner, the installer for Service Pack 1, the add new user window, and a load of other files I don't have a list of. There's only 1 account on the system, and it's an admin account. I've tried to use the run as admin option where possible.
Here's what I've done so far:
- Reinstalled intel graphics drivers, no effect
- Ran a startup repair, after an hour it hadn't loaded.
- Uninstalled norton 360, system speed improved by several hundred times, otherwise no effect, and bootup time still seems as long.
- Gone into windows firewall and reset all settings to default, no effect.
- Tried to change the settings in internet security, set everything low except for my computer, which is locked, no effect
- Gone into internet security and clicked set all zones to default, no effect
I tried to install SP1 (after failing several times before due to the system being too slow to install it), security blocked it, then apparently deleted the installer. I tried to make a new user account, to copy the registry settings for the security to overwrite the faulty settings on the main account, the new user account window was blocked by security.
In a cmd window run as admin, used command
secedit /configure /cfg %windir%infdefltbase.inf /db defltbase.sdb /verbose
gave a progress report, completed, no effect.
I backed up important data, tried to reinstall windows from scratch, the installer doesn't load, after clicking install now it just starts loading and doesn't stop. At this point, I thought it must be a hardware issue, so I tried to run some diagnostics from a bootable CD. It wouldn't read the CD.
View 9 Replies
View Related
Dec 1, 2008
This tutorial will show you how to set AutoPlay settings for CDs or other media.
View 0 Replies
View Related
Mar 27, 2012
We are currently using 3 computers.. one using outlook 2010 and the other 2 the original outlook express that came boxed with XP.Problem I have is with my outlook 2010 computer. Normally when we receive emails whoevers computer they go to first is the sole person that receives them but with my outlook 2010 computer I receice them and they also go to all the other computers.Is it possible to change the settings in outlook 2010 to correct this?
View 5 Replies
View Related