W7 Running Dual Cards
Nov 19, 2009
I have been running 2 ATI Radon 1300 dual port cards in my XP Pro machine for at least 2 years. I am using both cards to run 4 monitors. I bought a new machine with Vista Business and was never able to get it to run both cards, so I stuck with XP. Now I have upgraded the Vista machine to Windows 7 and it still will not see both cards, so again I am stuck on my XP machine. I have spent prob 50-60 hours working on this problem to no avail.
All that having been said, I NEED to move to the newer faster computer, but I am not willing to go back to only two monitors. Thus, I need some help, or some options. If there is a way to get both of the cards I have running, I would love to know it. However, if there is not I am willing to buy new cards.
New Machine:
Acer Vertion M460
Core 2 Duo E7500
2 Gig Ram
Chip Set Intel 946GZ + ICH7DH
My current cards are both ATI 1300s One is PCI and the other is PCI Express
Anyone got any ideas?
View 5 Replies
ADVERTISEMENT
Aug 16, 2012
I plan on getting a Nvidia GTX 570, but I don't know whether I should get two or one, because my motherboard runs one at x16, and two at x8.
View 2 Replies
View Related
Nov 26, 2009
This is a strange one and i'm hoping someone can help me solve this!
I have a work PC with XP on with 2 x Nvidia 7300 GS graphics cards in. The system doesn't have an onboard graphics card and i've only got 2 so i can have dual monitors.
I tried to install Windows 7 Pro (32) on a seperate partition and it kept BSOD (hardware error 000124) on the 2nd reboot before finialising installation. The only way i've found of not making it BSOD (or just go to a black screen then restart) is to pull out one of the graphics cards and run it solo. With this done everything seems to work.
It will also happily boot into Safe Mode with both. I've got the latest NVidia driver from the site and it's been installed but that makes no difference to the issue.
Any ideas or should i just get 2 new gfx cards?
View 4 Replies
View Related
Feb 1, 2010
I know some people have been asking questions concerning 3 monitors on Windows 7, but they don't answer the question for me (i think).
My system is an ASUS P7P55D-E Pro, Core i7-860 2.8Ghz and dual GeForce GTX 275 1.7 GB.
I've spent a good couple of hours to get this to work or reading up on it, but I just have a 3rd monitor sitting here.
View 2 Replies
View Related
Jul 9, 2012
wondering whether or not I can hook up two Galaxy Gtx560 1gb Cards to my Asrock h61M/u3s3 ?
View 7 Replies
View Related
Feb 10, 2013
I recently installed Win 7 on a second Hard drive. Is it possible to run the programs I had installed on the Vista Hard drive? Both are HD's are still installed.
View 2 Replies
View Related
Mar 31, 2011
I got two monitors and marked dual monitor. When I put full screen sometimes that program goes to second monitor sometimes on main monitor. I got windows 7 64bit also. When I put full screen program on second monitor the wallpaper is getting low..I will post screenshots. First one is when I run a game for example and second, normal working
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) Dual Core Processor 5200B, AMD64 Family 15 Model 107 Stepping 2
Processor Count: 2
RAM: 4095 Mb
Graphics Card: NVIDIA GeForce 9500 GT, 512 Mb
Hard Drives: C: Total - 102822 MB, Free - 27891 MB; D: Total - 166823 MB, Free - 126027 MB; I: Total - 17500 MB, Free - 13213 MB;
Motherboard: ASUSTeK Computer INC., M2N-MX SE Plus, Rev x.xx, MF7088G00711457
Antivirus: AntiVir Desktop, Updated and Enabled
View 2 Replies
View Related
Feb 27, 2012
how can i set up dual monitor display on my imac running window 7 with parallels? I have no problem when I run mac but when I run window, dual display doesn't work. I heard AND radeon has some problem with window 7 display setting.
View 1 Replies
View Related
Aug 12, 2012
ive been getting BSODs and finally figured out how to debug it with WinDbg (x86) and set the symbols for windows but i cant read the text. ive tried reinstalling my GPU and Java but no luck. when i try to run intel driver update utility as soon as i run it i get a BSOD ive got the minidump here if anyone knows how to read it, so here you go.
Microsoft (R) Windows Debugger Version 6.2.8400.0 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:UserskalyeDesktop�81212-36504-01.dmp]
[Code].....
View 9 Replies
View Related
Nov 1, 2011
I'm just installed windows 7 on my 2009 imac through bootcamp. However there are some problems. Ive noticed when i try to play something on windows media player it will tell me that my computer is running low on memory and to close some windows. Also games run poorly if at all. I suspect its a driver issue but have gone through all the auto updates etc.
View 4 Replies
View Related
Jan 29, 2012
As I shutdown/restart my laptop, I notice it switches to a secondary desktop that has been running programs.A good example would be trying to open my Task Manager, I can Ctrl-Alt-Del and it will allow me to open Task Manager - however when I click on Task Manager, it opens on the Desktop running in the background. I can't even access the Desktop in the background, it only shows up as I'm shutting down - closing programs that I tried opening awhile ago.
View 7 Replies
View Related
Oct 17, 2009
I have two 9500GT video cards one id Evga and one is BFG they are both 1GB DDR2. I have looked into it but you experts will know. I think it's possible to set up a crossfire configuration. It might not be worth doing but i would mostly do it for fun and to see if I can get it working. My current mobo supports it and would like to play with it.
Is it possible with the same GPU but different companies and possibly slightly different specs on the rest of the card? I thought if it the same GPU you could do it.
http://www.newegg.com/Product/Product.aspx?Item=N82E16814143150
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130395
Also you might know if I can make a USB install flash drive with professional and use it to install home premium or ultimate as long as I have the licence keys?
View 4 Replies
View Related
Jun 4, 2009
I was having a problem with dual monitor using 7127 build. But only when I use newest NVIDIA drivers. My tv just flashes a few times, and I can see that fish a couple of times, but then it just goes to like no signal. If I use default drivers which are installed on windows install, then it works fine, but then I dont have NVIDIA control panel and some other features.
My video card is GF 8800GTS 650M 512MB DDR3 DUAL DVI TV PCIE. I would like to know if anyone else is having this problem and If it has been fixed in the newest build, so I could be arsed to do a clean install.
View 9 Replies
View Related
Jul 31, 2009
Just a thought. I'm currently running an XFX 260 Black Edition on my Asus P5Q Pro MB.
I still have my old card- A BFG 8800GTS OC 512MB.
I kept meaning to ebay it but never got round to it.
Is there any way I could usefuly use it in my present set up?
View 5 Replies
View Related
Jun 5, 2012
Is it possible to put a Nvidea GTX 560 + Nvidea GTX 670 in one pc, and get them work both with one monitor?
View 7 Replies
View Related
May 5, 2009
i just installed the latest build of Windows 7 (build 7100). and there are a few problems with my graphics options. There are 2 systems that i tried this on and both are having the same problem. The first setup has a Ati Radeon X1650 by MSI, and the drivers install, signed by WDDM. Now the monitor/tv that i am using is a 42inch LCD TV, and has the 1920x1080 resolution, that is its native resolution. Windows 7, supports the resolution and has it as the recommended resolution, however, when i select it, my monitor says "mode not supported" this is the same problem i have with the HD2600XT card from ATI.
Both of these cards work in Vista Ultimate, Vista Home Premium, Vista Business, and XP Pro SP3 and XP Home SP3, and even tried Server 2008 and server 2003. all of those OS's work with the native resolution on the monitor except the Windows 7 builds. anyone have an idea why this would be??
also, for the HD2600XT i did install the latest ati driver 9-4, and nothing is fixed. right now i am running it at 1280x768, but its skewed.
if anyone has any info on this it would be great, as i have tried everything.
i have also tried installing the 9-3 drivers on both cards, manually and using the installs. the manual way was to unzip the driver package and in device manager install the drivers myself.
The one system i have plugged into it now is a Shuttle Barebone SG31G2B, 4 GB of ddr2/800 ram, quad core q6600 2.4ghz, and the hd 2600xt.
View 9 Replies
View Related
Oct 31, 2009
Microsoft says that Smart Cards can be used in conjunction with Encypting File System (EFS) to keep the encryption key off the computer.
What are smart cards, and is that the only it can be done? Why not a regular SD card or flash drive?
View 8 Replies
View Related
Sep 30, 2009
Will pci cards such as ones for connecting CCTV cameras to a PC work in Win 7 XP mode.
View 1 Replies
View Related
Feb 4, 2011
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies
View Related
Dec 30, 2011
When I put a CF or an SDHC card in the internal (USB) cardreaderor in an external (USB) cardreader, those cards are not seen, although the readers are seen alright.When I disconnect the internal reader, put a card in it, and connect it again to USB, the card is seen. Take the card out, put it in again; no card. Same with he external reader.I checked Device Manager on possible wrong settings, but couldn't find anything.
View 6 Replies
View Related
Jul 11, 2011
The problem is that no kinds of storage cards are currently working perfect on my computer.For an example no phones can be connected, have tryed 2 htc's with microsd cards, and a sony ericson with an m2 card, and same problem. Also if i try to open any SD cards, like camera it dosent work.The thing is that it comes up as removable drive, but when i try to open it it just says please insert card. I have tryed deleting, installing reformatting drivers, and cards like crazy and its the same. I have also tryed changing the drive letters around but the issue is the same.The only thing that makes the work is the following: If i leave the card in the cardreader, or a phone connected, then restarts the pc whitout removing the card or phone, then it works when its rebooted. but asoon as i remove the card/phone and reinsert them the issue is still there "please insert card".I have even changed the motherboard, cpu, and memory, and formated the computer 3 times but still same issue. So im thinking that windows is installing wrong driver or something? [code] Also the issue was the same on my old computer also running windows 7 that had a socket 775 build.
View 9 Replies
View Related
Mar 9, 2009
Dont know if it should be in here Toshiba Flash Cards is a program that runs when you press 'FN' it displays a top flash card thingy that allows you to use the FN -> F2 etc... keys cant get this to work on windows 7 though anyone got any ideas ill try a few more things i think might be able to fix it but does anyone else have any ideas?
UPDATE: seems to be a error with KeNotify.exe...... When i press FN it crashes KeNotify
UPDATE 2: Running in Compatibility and/or Running as administrator still makes it crash.
View 3 Replies
View Related
Jan 15, 2013
i usually record PC games using fraps and it got me thinking to how do people record console footage and then put it on the computer.The problem is i dont know the first thing about gaming capture cards and how they work, i do know however that some of them are PCI cards.
1. if a console is connected to a T.V how is the footage captured from the console to a PC?
2. Does using capture cards also provide audio or do you need certain cables (3.5 jacks, hdmis, etc)
View 2 Replies
View Related
May 22, 2009
It is possible to run ATI and nVidia cards together in Win 7? Because of nVidia PhysX. I know this was't possible on Vista's but I heard rumors that this is possible now.
View 2 Replies
View Related
Nov 29, 2011
I built a HTPC with a video card that does DVI and hdmi. The motherboard has a VGA.
But I also need either: s-video or composite What should I do? I don't want to like "downgrade" the video card and just use an old one for everything. Can I run them both? Like switch back and forth? "Simultaneous" is not required.
Also, I would already be using the PCIE 2.0x16 for the video card. I have PCIEx1 and PCI slots open. EDIT: I found this... [URL]
Would this work in letting me switch between the onboard video and the video card?
View 1 Replies
View Related
May 23, 2012
i have got a new PC and was wondering if i could use my Nvidia Geforce GT 440 with my Nvidia Geforce gt 220 at the same time? I want this setup so i can get more fps on my games. I have a custom built gaming PC and i really want good gaming proformance.
View 6 Replies
View Related
Oct 23, 2012
I have an old HP Proliant PC that I upgraded to Windows 7 Professional. There are only two PCI-X slots (one half height and the other full height). This is not PCI-Express or plain PCI.i need to add a video card to support a higher resolution monitor. There is an ATI Radeon 9200 PCI-X card out there, but it is not supported with Windows 7. Since this card type is more than 10 years old and operating systems have moved on, I need to know where to find a new PCI-X graphics card (or used) that will support higher resolution. If a standard PCI card will fit in the slot, will it work and what is the down side.no drivers for Windows 7 with PCI-X.
View 4 Replies
View Related
Oct 13, 2009
I run a Nvidia GTX 275 Works flawlessly even if i use both ports on the back to use dual monitors.
If however i plug my Nvidia 8800GT in the second PCI-E x16 Slot the computer only recognizes the 8800GT which is in the second port and there is no GTX 275 showing in the Device Manager or Boot Menu.
So basically i plug in my second video card and my primary card just vanishes from the computer like its not even there.
Has anyone got an idea what could be the cause of this?
I have checked the drivers and its the same drivers at the moment for the 8800GT and the GTX 275.
I want to be able to run my 19" Widescreen Monitor on my GTX 275 and use my 8800GT Card for my tiny 15" Screen so i can play Games on my Primary card and be able to have Website open and viewable all the same.
(I'm not trying to run SLi as i know you need 2 of the same GPU and your motherboard needs to be able to support it, I don't like SLi so its all good so far.)
View 9 Replies
View Related
Feb 9, 2009
I currently have an ATI RADEON HD 4850 in my computer, but i have an old Nvidia 6600.. something laying around. I was wondering if it would be possible to drop that in my system and use it purely for additional monitors. I dont mean to link it with my ati card cause i know that that wont work, but basically keep it separate to run a few more moniters.
Edit: not only for windows 7 but if its possible on vista too.
View 4 Replies
View Related
Nov 10, 2009
I have a ATI Radeon HD 4800 that I use with DVI for my main display. I recently installed a Radeon 7500 PCI with the sole purpose of using the S-Video output to stream video to my TV. Under the device Manager I get the following error with the new card
PCI bus 7, device 1, function 0
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
What can be going on?
View 5 Replies
View Related
Jan 5, 2010
I recently built a new machine that I have three monitors for. When I only had two monitors I had this card installed: Newegg.com - PNY XLR8 VCG98GTEE5XEB GeForce 9800 GT EE 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card - Desktop Graphics / Video Cards
This card works perfectly fine and I had no issues with it and I plan to continue using it. However, now that I have three monitors and I need another video card I'm running into a lot of issues. I tried installing another PCIe 16 card I had lying around but my setup didn't seem to recognize the new card. I do not have the exact model number on that since it was given to me, but I believe it was a GeForce 6 series card. I also tried a PCI ATI Radeon card that I had laying around found here Newegg.com - SAPPHIRE 100945L-BK Radeon 7000 64MB 64-bit DDR PCI Video Card - Desktop Graphics / Video Cards
This card showed up in the device manager as a Standard VGA adapater but in the properties it had an error saying "The device could not start".
So I guess my question is this: What is the cheapest way to get three monitors working on my windows 7 64 bit machine? I want to use the first card I linked to and one other one.
Would this card work? [URL] - PNY VCG84512SPEB GeForce 8400 GS 512MB 64-bit GDDR2 PCI Video Card - Desktop Graphics / Video Cards
Here is my motherboard in case that'll help: ASRock > Products > M3A780GXH/128M
View 9 Replies
View Related
