W7 64-bit Internet Bandwidth Loss. SMC Driver Issue
Nov 5, 2009
I have a desktop with wireless access thourgh a USB wireless card (SMCWUSB-G)
I don't know what else to do. I have tried everything. I have searched around in forums, asked people. I need an internet expert.
I have a 20Mb internet plan but after swtiching from Windows 7 32-bit to Windows 7 64-bit i dont get more than 2Mb, normally only 1Mb. Plus now my signal is weaker, i'm only getting 2 bars out of five when i used to get 3 or 4.
My download speeds don't get passed 30kb/s and i lose connection all the time now. I can say its not the distance from the router. Here is what i have tried to solve it:
- DOS command: "netsh int tcp set global autotuninglevel=disabled"
- TCPOptizmier: gotten only worse and i think it was when my signal started to get weaker.
There is 3 PCs and 2 macbook in my house First, when i moved to the new house there is only my friend laptop n my PC It got 1MBps speed and everything is good Then, we got another housemate using Mac and PC, obviously the internet is slowing The speed is down greatly even i have to wait a lil bit to access certain site now, recently i've got a parasite who also uses mac n now i cannot access everything, even i can't even Access GOOGLE (COME ON!!)The time that I can access smoothly is when the mac user is asleep N the one who troubled is not only me, but my friend who uses Win Laptop Even now i have to wait 15 minutes (by continuously hitting refresh) to create this thread so, is Mac got strong antenna or some special feature to hog internet?And is there anyway to see who uses internet in the shared network?
What I'm trying to do is combine the bandwidth from 2 different internet connections for extra speed. I'm hoping to do this without a dual WAN router as the modems are in 2 different rooms.
I have a connection from Comcast which runs through my Belkin Wireless N router, to which I am connecting wirelessly. I also have a DSL line through Centurylink and I am hardlined directly into the modem.
I have tried bridging the WLAN/LAN but haven't seen any difference. I am running Windows 7 Ultimate X64
Basically.. I have a orange LED light that blinks like crazy when I'm downloading something.. but what's wierd is.. Once I've finished the download, Sometimes.. It just keeps blinking forever!
That tells me that it's downloading from somewhere and I can't tell from where exactly.. Luckily.. Uninstalling the wireless driver & reinstalling it solves the problem but it tends to come back eventually..
So what I am requesting from you fine people here @ SevenForums is for some type of Internet Bandwidth Monitor which I can use to see where my laptop is downloading from & hopefully stop it completely so that I may use my broadband speed for something more.. For me & less for what I don't want.
I am running Connectify on a Windows 7 laptop. I am currently having issues with something eating up all the bandwidth and I want to see if there is any software that I can use that will monitor each computer's amount of internet usage (WireShark won't do, if it can please tell me how).
When ever I start a download it eats up my internet bandwidth, making browsing a normal web page take forever to load. When I'm not downloading a file i get about 12Mbps down, and 1Mbps up. When i start a download the numbers drop close to 0. The program performing the download seems negligible; whether its chrome, or IE, or a DL manager the download results are the same.This only happens on this computer, running windows 7 ultimate, my laptop running windows 7 is exempt from this problem. no other programs, excluding the download,
For the past year or so I've been using a telstra broadband manager USB to connect to the internet, now all of a sudden I am getting no internet access, not just from the broadband manager but from other networks aswell. I have tried my phones hotspot, other USB's and WiFi's to none of them working.It would start up and work for about 15 seconds, and then internet access would just cut out completely. I have AVG Internet Security 2012 installed and I have tried disabling the firewall (Windows firewall also) and yet it still doesn't work.
Verizon Fios, Actiontec Router. Windows XP machines (wired) (2) never any internet loss whatsoever. Running the wireless from the Actiontec and also a Linksys that is on one of the ports. (distance issues) The Linksys always syncs up and both wireless systems work 100% all the time with either XP or Win 7 laptops.
Here's the issue: two wired desktops running Win 7 have intermittent internet drops. One is older, one brand new fresh out of the box. Turned off the power saver NIC card function on both, WOL disabled. That's not the problem because the internet losses occur sometimes after the machine is on for a few minutes, the PC does not sit long enough to go into power saver anyway. There's no rhyme or reason as they say when the loss will occur. Sometimes this will not happen for a day or more, other times it can happen after using the machine for just a few minutes.One thing I have been trying is to disable IPV6 then I can get the internet back, othertimes re-enable it to get the net back. Go figure. Again, disabling it will not fix the problem, however switching it on/off will. Disabling and re-enabling the NIC will only fix it sometimes, most instances that does nothing. There are different types of NIC cards in the machines, one uses a Realtec on board, the other uses Nvidea on board and a plug in NIC (brand?) all NIC cards/board performs the same.Also, when they DO work, if I let them boot for a while, usually they will be fine, but that's looking at a 10-15 minute boot up. (doesn't take an excessive time for actual boot-up but I mean just leave it alone for 10-15 min) The Actiontec has the most current update version, and is about two years old. Somehow these machines lose the internet portion but not the network portion. Such an annoying problem, even more so when I added a brand new machine and get the same issues. I would be willing to bet that if I ran them wireless there would be no issue, but that's going to slow down the dl/ul speeds that I get with a wired connection.
Two days ago I lost internet connectivity suddenly on my desktop (Dell XPS 630i, onboard Nvidia network controller, running windows 7 Home Premium 64bit) and have been unable to restore it. As my laptop (winXP sp3) can still connect to the internet and the router settings have not been changed (Dlink DGL4500), I'm making the assuption that my networking problem resides on my desktop alone. the network adapter gives me a 'limited connectivity' symbol and refuses to connect to my network, even though the router acknowledges the desktop's wired connection. The troubleshooting diagnostic sometimes finds nothing, sometimes finds that the computer is not obtaining a proper IP, and sometimes claims the problem is the router. I've also disabled windows firewall. Throughout this whole process I have been getting a 'Drive Power State Failure' BSOD during restarts (about once every four or five restarts, not consistently).
At first I was unable to replace the drivers or uninstall the adapter through device manager. After reinstalling the drivers using the Nforce 650SLI drivers on their website, I was able to do this, but this did not solve the problem. I also did a windows restore to before the problem occured, also with no luck. I've been through the event log and there are numerous code 5007 errors, which just tell me that the adapter timed out during an operation. I've also read through some forums online and tried several solutions including adding a DhcpConnBcastFlagToggle line into the registry: SOLVED: Network Icon Exclamation: No Internet
My computer is relatively recent only being bought back around Feb/March. For the past month the machine has been crashing and when I log back in I need to restart my router in order to get my internet connection back. The strange thing is that other computers connected to the same router also lose their connection shortly after the BSOD on my machine (both machines have wired connections). I am using the same OEM copy of Win 7 Professional 64 bit that was installed when I bought the machine.I have tried updating the drivers on the network card but that does not seem to help. I also tried looked at the dumps with WinDbg to see if I could find a specific driver that was playing up. I also turned on the driver verification a couple of times to see if I could find a driver that was suspect -- that caused almost immediate crashes but I could not get to the bottom of what was causing it but it could make it happen by starting up Mumble.The BSODs have so far seemed to happen when I am playing a game, using something like Mumble, or watching a stream.
This morning (Wednesday) my desktop computer brought in automaticly Tuesdays (26/04/11) set of patches, 6 in total for my machine. I turned the computer of for as I headed of to work and they installed on the shutdown. On returning from work the updates continued the install procedure on loading, but stuck at 0% for over 20mins. I decided to check the install time for this stage on my laptop 7pro x86 and it wizzed through in a few moments (laptop is a good 6yrs old). I figured the desktop was stuck and hit reset, every time it would get stuck at 0% on configuring the updates. Booted into safemode and ran system restore to the morning. Computer now loads up ok but will not connect to the internet. It would appear that its not getting an IP from the router.
What i've tried so far:After running system restore I've removed the Anti virus (Eset Smart Security). Tried setting manual ip address and ping router and laptop, also tried ping from laptop to desktop, both ways destination unreachable. reinstalled network drivers, same fault occurs. Reset winsock (netsh winsock reset catalog), rebooted after. reset TCP/IP (netsh int ip reset c:esetlog.txt), reported ok, rebooted same fault. ran sfc /scannow, reports system file integrity ok.Unchecked IPv6, same issue occurs. Checked network cables on laptop, ok.
I am having a nightmare with my windows 7 64 bit home edition. It is running extremely slowly. I have lost the internet connection and the windows firewall has turned off and cannot be turned back on. Whenever I boot up i get the message "failed to connect to a windows server" The event viewer log is also unavailable. I have established that my internet is working on other machines. I have also attempted to reset winsock in safe mood. However this has not worked.I've had the system for about 9 months with no major problems. I have McAfee and have run windows defender and adaware so I am pretty sure it's not malware.
Until recently I ran windows xp. I shared a built in wall Ethernet jack with another desktop. I used my router (Linksys Befsr41) as a switch by disabling dhcp and connecting the wall ethernet and the two computers to the Lan ports on the router. The other desktop until recently was also running windows xp, but was upgraded and is now an apple imac running os x lion. My internet briefly stopped working but I was able to reset my router and get my internet running again. I then needed to reformat my build and installed windows 7 ultimate 32 bit. I cant quite pinpoint my problem. If I connect straight to the wall ethernet jack i have internet access. However if i use my router as a switch to get internet for both my pc and the apple imac, I will not have internet access. Sometimes the internet does indeed come back on in this circumstance, only to get disconnected again shortly. I am not sure who to blame because the router worked fine when spliiting ethernet for xp machines, and I have internet access when running straight from the wall to my pc
I had a power loss while running on battery (it still showed power left, but suddenly shut down anyway) and when I restart, it reports that the Windows is not activated and Window is not genuine and system might be a victim of "counterfeiting."
Is this a virus (I have MSE on continuously and about once a week scan with Malwarebytes)? I have run 'sfc /scannow' with filtered output ('findstr /c: "[SR]" c:.....logsCBSCBS.log" and it appears as usual.
svchost is using too much bandwidth. I am monitoring with NetLimiter 3 Pro. For example, from 5 to 6 AM it downloaded 268 MB and uploaded 6 MB. This is a problem since my internet provider sets a 400 MB/day download limit, so in less than 2 hours the limit is used up. I am running Windows 7 Home Premium, 64-bit with SP 1 installed.
This problem started a few months ago. I've had this computer since December. I'm having the same problem with my wife's computer (Windows 7, 32-bit).
I have checked for malware with Norton 360, Webroot, Windows Defender, and a few other freebee programs. Other than a few cookies with low threat levels and "Power Reg Scheduler" there was nothing there. I have removed these few items. I have also run Wisefixer, that fixed over 200 supposed registry errors. None of this has had an effect.
the screen will get very dim at the windows icon where it pulses against a black background..could this indicate I need a bigger power supply? (I read that somewhere recently, hehe)When I use my iphone, xbox, or any torrent program, my computer slows down and my mouse stutters for lack of a better term. It waits a few seconds before jumping to where ever it was that I moved my mouse. This is stopping me from using the computer when I watch netflix or anything else where data is being transfered. I'm not sure what Hijack This found, but here's the log it provides and if there's anything else I need to post, just let me know where to go and I'll post it here ASAP.
After installing a new Virgin Superhub and finding I had internet access I thought that everything was working fine but later on this morning I found out that my Home Network ie wifes pc and the broadband connection to my main television set was offline. After googling a while and finding an article at the Virgin Media site I found out that the Default setting when installing the virgin superhub was as a router which meant that it had blocked off my Buffalo Airstation router and hence the no internet on secondary PC and TV. I had to enter the admin pages of the Virgin superhub and re-install it as a cable modem and when I eventually rebooted my system, and after a couple of tweaks I finally had my home network up and running again. I use Comodo Dragon as my default browser and a couple of hours ago I noticed a slow up of my main Win7 OS PC broadband connection which shouldn't really be as I have upgraded from a 10Mb connection to a 30Mb connection and my internet has seldom hung like this. It seems to be an entry of svchost.exe that is causing the problem. I did a scan with Process Explorer screen shots below. The svchost entry with PID 1892 is linked to "Local System Network Restricted" and to the service Superfetch. On the Comodo CIS Summary screen at the same time I saw that even though Comodo Dragon is running it is not shown and again svchost is using 90+% of my bandwidth. And when checking the Firewall Events screen I saw that some of Comodo Dragons functions had been blocked.
is there anyway to limit file transfer speed on the local area network (not the wan port)? I have a tv tuner farm on my server wich I use to stream live tv to other computers on network. Problem is when I start a file transfer it maxs my connection leaving tv unwatchable. I am running windows 7 hp and have a wired gigabit network
From the past few weeks or so, I am on a limited data plan (10 GB per month).When I browse the internet for an hour or two (usually Facebook, Twitter, Blogs and some forums), my data exchange for that session goes to around 700-800 MB. I'm pretty sure something is wrong with it. Simple browsing can't consume so much of data. I have Windows Auto Update turned on, but I don't think that the updates would be so large. Earlier I was on an unlimited plan and so I never checked the amount of bandwidth used.my brother has recently opted for an EDGE plan and gets very low speeds. How can I help him increase his browsing speed? Even he doesn't downloads much but is a heavy internet browser and is extremely irritated with the slow speeds he gets.
I was wondering if there are any programs out to that I can have on my computer running in the background that watch how much comes in and out of my computer. I'm not looking for speeds of my upload and download (I have Raindrop for that), I want to know exactly how much I've gone through in a certain amount of time.
I have recently installed Windows 7 on our two wfi networked pcs. The older of the two consists of a Asus A8N-VM CMS mobo with 3Gb Ram and Athlon 64 3000+ CPU. The second pc has an Asus M5A78L-M LX mobo ithe 4GB Ram and Athlon II X2 Dual core 250 3.00GHz cpu. Both were previously running XP and had no bandwidth or streaming issues. Since loading W7, the older pc is having problems with low bandwidth when playing live tv fromthe BBC for instance, but if XP is started there is no problem at all.
The newer pc streams perfectly and I could watch tv on it all day without it freezing.I have also found that IE9 makes it worse and have gone back toIE8.
I'm running wampserver on a windows 7 machine. My problem is that when I try to download from the site my max download speed i 300kb/s. I used to run the server on windows xp and there was never any problems with bandwidth limit. So I moved back to the xp machine and the problem was gone. So is there a way to remove the bandwidth limit in windows 7?
Seems like whenver I boot this computer up from sleep mode, it starts doing something that takes up a chunk of bandwidth. identify what is slowing down my Internet so much?
A friend told me that I can delete the host files and get some of my bandwidth. Is this true? Would windows eat some of my bandwidth? (regardless if its the Host Files or not,) ofcourse winupdate is excluded in this question... If so, what steps should I take to maximize my connection?
I'm wondering if there are any way to test the speed/bandwidth of an SD card with built-in Windows 7 utilities/diagnostic software?
And in the absence of that, what are the best (and safest) freeware utilities to do this test?
I'm not having a problem with my machine, simply want to figure out which of my SD cards are the slowest and fastest so I can decide which to use and when.
heres a pic of the down speed when i watch a Internet video
i dont know if this is a normal thing but it makes videos load a lot slower. even if i limit the speed to 200 - 150 it still goes down to 20 every 5 sec. this is also a problem when i'm gaming and another simply browses the web.
ps: when i downloaded bf3 on origin the speed remains on a constant 300kb somehow. but when its on steam it still fluctuates
- i disable internet access on my pc and use connectify and create a virtual hotspot,
- then i use my ipad (the device i want to transfer files from my pc to) and connect it to that virtual hotspot
- i use the program Phone Drive on my ipad, it has wifi sharing feature, it gives me the http:// and ftp:// addresses. i know these things, i can either use http:// address in my browser or ftp:// in any ftp clients, then i transfer files easily,
- when i copy files from my ipad, my pc actually downloads the files, not copies the files, likewise when i copy files from my pc to my ipad it actually uploads the files, not copies. and this is why i disable internet access before i create virtual hotspot because i don't want it to use my bandwidth (or data).
- and HERE'S MY QUESTION: does it actually use bandwidth when i upload or download, if it does not, then i wouldn't need to create a virtual hotspot and disable internet, i just need to connect them directly to my real router hotspot and use. and how do i know/how can i check?
the transfer speed is actually very slow, like 2 MB/s, i thought this is normal since when i download files from internet it's about 2 MB/s too, but then i see many people on some websites say their speed is 10MB/s (they say this is slow, i think this is fast), or 80 MB/s, so i wonder why is my speed so low? and this is not a real wifi hotspot, it's virtual, so it should be fast, is there any other software that can make a virtual wifi hotspot that has fast speed? and why are other people's wifi transfer speeds so fast but mine is slow?
Can anyone recommend a free bandwidth monitor for Win 7? Specifically, my network speeds sometimes drop very low. Does a utility exist that will list in realtime all services on my system that are using bandwidth, and how much bandwidth they are using? I've found a couple (Axence Net Tools, Networx) that list all open connections, but they don't show me how much traffic is moving through each connection.
