Using Windows 7 Update Fails
Jan 3, 2012
I have a valid copy of Windows 7 family pack. I have used for a while. Worked just fine until I recently had a HD failure, replaced HD and cloned it and had to reload Windows 7 from my valid Windows 7 install disk. I have a "confirmed" Genuine logo on my System page and have confirmed with Windows online that the product key is valid.Issues: ~Windows update will not work. No update come in and updates errors out, saying the service is not running, when I check with the Windows Servcies, Windows update IS running ~Windows homegroup networking will not work, even though Windows "sees" the network..it will not join the homegroup with my password ~Today Windows online validation is saying my Product ID has expired? Why...my System page says I have a valid copy with a Windows Logo.~ Again I have a valid "Family Pack" used on only 2 computers, even though I could have a thrid I do not. I reload from the valid install disk. Thats when my problems statred. I use Mcfee firewall. Turning off the firewall seemed NOT to help either.
View 9 Replies
ADVERTISEMENT
Aug 26, 2012
I use a acer aspire 7750G,windows 7 home premium 64 bit, intel core i7 2630QM, AMD radeon HD 6650M 1Gb, A week ago I had to install 8 updates, so I did ofcourse. After the installation and the reboot the system told me to install 8 updates I tried many times to install these 8 updates but non of the times it worked. In this image you can see which ones they are (I am Belgian so it is in dutch)
View 9 Replies
View Related
Dec 26, 2011
2 days of searching google, its various articles, forums, sites.. but none of them apply.Issue: Error Code 800B0100 when trying to install Windows Update KB2556532.I've got no idea what to do at this point, even downloading this "tool" the help file suggestsdoesn't fix anything, I couldn't download it at first, it froze 3 other computers in the processan somehow I eventually got it but as I launched it I soon learned it'd freeze at thelast 5-25% of the progress bar aka "HANGS" the whole system.Along my journey I learned that any virus scanners & firewalls HAD to be disabled to have anyhope of getting this far, but now.. it's just at 'that" point.
Win 7 64 bit home prem. (not my idea to get this os, i hate it thus far) sp1 with seeminglyevery update but this ONE.I don't have a windows disc for this, its got that stupid "windows disc saved to a partition"crap that I hate as I'm sure many others do too.Zone Alarm & Avast but those get disabled so I don't think thats going to matter to ya'll.I can't think of anything else that'd get in the way, oh an the "trustedinstaller" thingy isenabled an running so.. ya.Hope someone else can solve this, it's a brand new laptop, never "upgraded from anyprevious windows-whatever".
View 5 Replies
View Related
Aug 30, 2012
I am having difficulties with updating Windows 7 on my laptop MSI FX603. Windows 7 came loaded with the laptop, though I do not know if I have windows 7 basic, premium, pro or else.I went on vacations in July, came back in August and I had a bunch of updates. I updated everything at once but I have 8 update files that fail to install from which only 1 error fail to update occur in the update history; therefore I assume this particular error prevents other updates to install correctly.
Update for Windows 7 for x64 based systems (KB2732500)
installation date: 8/29/2012
You may need to restart your computer for this update to take effect.
Installation status: Failed
Error details: code 80071A90
Update type: Recommended
The knowledge base has several links, I tried all of them. 1 of these knowledge base is about downloading a windows 7 little program called "fixit" but after several attempts, I concluded Fixit cannot solve my issue or is not the proper way to solve my issue.The whole updating package files is roughly around 39 megs and I wonder if Windows 7 actually download the packages every time I click on Update or if Windows stores the updates ready to be installed somewhere on my HDD in which case I would need to re-download the update but I do not know how?
View 5 Replies
View Related
Dec 21, 2012
It got stuck at 15%. So I rebooted into Safe Mode, tried System Restore. It failed, so I tried System Recovery Options, that failed too. Then I rebooted it regularly and it tells me that, in fact, System Restore worked. Now what do I do? (Besides backup my stuff.) Try to update Windows manually or do I need to do something before that?
View 12 Replies
View Related
Jun 30, 2012
While recently using Nero 10's suite of programs I encountered a screen indicating several programs had newer versions and that I should update before continuing. I then updated the programs. The update process required a system reboot to complete the update, since part of the update process could not be completed while the system was running. After clicking on the "Reboot Now Button" the system went through a normal shutdown and start up process. However, after displaying the Windows 7 screen the system hung and I never saw the Windows 7 Logon screen.At this point I powered down and restarted the computer.
The computer displayed the "Windows did not shutdown properly last time" screen during the loading process. I then selected to finish booting in SAFE Mode. The computer then booted successfully and I was able to exercise the system. I then attempted to restart the computer from SAFE MODE but again encountered the "hanging" condition. I again attempted to reboot and once again received the "Windows did not shutdown properly last time" screen. Since booting into SAFE MODE hadn't solved the problem, I attempted to boot into SAFE MODE with networking.This caused the system to again "hang". In summary, I am able to boot into all but the SAFE MODE with networking capability, which reproduces the problem.Since SAFE MODE failed to resolve the issue, I attempted to boot from a Windows 7 Installation DVD. After successfully loading from I selected the "Repair your Computer" option, which then located the Windows 7 system and attempted to repair the error.
After completing the system repair, I again attempted to restart the system, thinking the repair had been successful. However, the computer again "hung" without displaying the Windows Logon screen.I then used an external USB drive containing Fedora 15 to successfully boot the computer. This has allowed me to "poke" around on the hard drive containing the Windows 7 system. I've examined the failing drives partition tables to see if during the updating process the drive had become corrupted. Upon examination of the drive's partition table, I could not find any apparent errors. The following screen shot shows the partition contents of the Windows 7 drive:[CODE]
View 1 Replies
View Related
Aug 18, 2012
I have tried connecting to my router with both wireless and lan cable but they both fail. What is strange is that my vista laptop (currently using) has no problems connecting either wirelessly or using the same lan cable as my desktop failed with. My windows 7 desktop was working fine earlier today but after I went out it installed the updates and since then no amount of rebooting or restarting of the router has fixed the problem.
View 2 Replies
View Related
Feb 6, 2011
I have seen this problem on other forums. None had a satisfactory answer (besides the usual reinstall).Windows now fails to boot, after Win update automatically installed the update and insisting I restart. The update was Definition Update for Microsoft Security Essentials - KB2310138 (Definition 1.97.1113.0). Startup repair finds no problems. The BIOS recognizes the system drive and reports no errors.
I had done (before the update installed itself): repaired the "windows can't find the DVD drive" problem using the Microsoft "Fixit" for that problem it was successful). Also the external storage drive on a USB 3.0 controlled was dropped by the system at some point (hence my anxiety; all my backups, including a rather stale system drive image, are on that drive). I can access the Win 7 system drive with another OS on the machine (XP SP3).
[code]...
View 3 Replies
View Related
Aug 4, 2011
I have an HP Deskjet 1220C printer connected to my PC running Windows XP. My laptop is running Windows 7 64-bit. When I connect the printer directly to the laptop Windows Update finds and installs the driver, no problems. However, when I connect to the printer over the network, Windows Update fails to install a driver.
View 2 Replies
View Related
Sep 1, 2012
I have a lop top with Windows 7 64 bit OS. Of lately, Windows update keeps failing to install some software updates. Here are the details of the s/w that would not install[CODE]
View 2 Replies
View Related
Dec 1, 2012
My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies
View Related
Nov 3, 2012
I reinstalled Windows 7 on my computer a week ago when I bought an SSD, and then 8 came out, and I got it for super cheap so I decided to try it out. Well, I'm back to 7. ANYWAY, my issue is that virtually all of my updates are failing. I saw this problem before I "upgraded" to 8, and now I'm seeing it again. My computer stays on the "updating" screen for a while, and then says the updates fails, and reverts to the last known function version of Windows. So my computer is useable, but I would like to have my updates so I don't have to wait 5 minutes for Windows to scratch its butt and get on with life.My error code is 800705B4.I wanted to show a picture of exactly what I'm seeing in my update history, but don't really want to take the time to sign up for a picture hosting website. If you absolutely need it, I will. Basically, I have an update history with a long list of:"Update for Windows 7 for x64-based Systems
View 5 Replies
View Related
Feb 12, 2012
My Dell 1525 Windows 7 laptop had begun to experience more and more frequent hard drive errors. So, in an effort to fend off total disaster, I purchased a new hard drive. The new drive was slightly larger than the old one (250GB vs 160GB). With a week old backup in hand, I used Acronis to do a disk CLONE to the new drive in an external enclosure. I was able to do it without any apparent drive errors. I then swapped drive for drive and rebooted. My most frequent apps worked fine, network access was fine, etc. Then I went to do a Windows Update - not fine. The little shield in the upper left corner of the box was red and, when I clicked on the "Check for Updates" box, it replied Windows Update cannot check for updates because the service is not running. You may need to restart your computer." I went to Services, started the service, marked it Automatic, and tried again - no joy. So, as it suggested, I rebooted. No joy again. After trying a couple of different backup versions with the same result. I went back to square one and used the original Windows 7 install disk. The install went fine and I was able to use Windows Update successfully. I hoped that having verified that a vanilla Windows 7 worked, I might be lucky enough to just be able to restore my latest backup. Wrong. The system appears to work fine with the only KNOWN problem being Update - there may be other problems, as yet unknown. Differences I am aware of: new hardware partitions proportionally larger than the previous disk.
View 3 Replies
View Related
Apr 21, 2012
Windows Update installation of Win7 SP1 (updating existing version of 6.1.7600.16385) reports the install as successful until reboot, then says successful and unsuccessful in the same dialog box. Error ID is 80242016. Subsequent run of windows update shows SP1 not installed. Problem repeats, even after following all steps in troubleshooting, including running the recommended hot fix for KB 947821, troubleshooting, & turning off anti-virus. Also, the windows update troubleshooter identifies my system as AMD64 architecture even though it is Intel I7 2600K. System infomation id's the CPU correctly. System MB is ASUS P8P67 PRO, 16GB memory, AMD Radeon HD 6800 Series video card.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, 64 bit
Processor: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz, Intel64 Family 6 Model 42
[Code].....
View 1 Replies
View Related
Jan 19, 2009
Clean installing Windows 7 x86 is no problem. But
1) upgrading Vista x86 to Windows 7 x86 fails and automatically rolls back to Vista, and
2) attempt to clean install Windows 7 x64 results in BSOD when rebooting to finalize the process.
Any suggestion would be appreciated.
View 3 Replies
View Related
Jan 30, 2011
I'm out of ideas. I've been running Win 7 on this machine for more than a year without issues in updating etc. Now it will not search or update/install critical items. I'm running Symantec (even tried turning the firewall off without any success). I get an error code 80072F7C. When I run hijackthis, I get an error message that my system denied write access to the Hosts file. I proceed with the scan but am unable to produce a log file. I've included a screenshot from the windows update error as well as the error I get when trying to run hijack this.
View 1 Replies
View Related
Nov 3, 2012
The update is called:
nvidia - Graphics adapter WDDM1.1, Graphics Adapter WDDM1.2, Other hardware - NVIDIA GeForce GT 425M.
After installing it, whenever my laptop tries to use the Nvidia card, I get a blue screen and the system restarts. I looked in installed updates to uninstall it, and it is not there. I did a system restore to four days before I installed it, and I still get the same effect. Lastly, I installed some older nvidia drivers that used to work using the clean install option, and I still have this problem.
View 1 Replies
View Related
Oct 30, 2012
A while back, after successfully downloading and installing some updates in the Windows Update, it prompted me to restart the computer to finish the update installation process. However, I continued to use the computer for quite some time before restarting it, and then when it tried to configure the updates on the start-up screen, it showed that it was not successful in doing so. In the past, I noticed that this would typically happen when I did not restart the computer immediately (or within a short time) after the updates finished and I got the prompt to restart. I would have to go to Windows Update and do it over again, and then upon immediate restart, it would always work properly. But this time, it did not, and I keep getting the 8000FFFF error message instead.
Also, now, every time I start the computer, it shows that it's "Preparing to configure Windows... Do not shut off computer" (presumably the updates that never got completely and correctly configured) in the start-up screen... gets to 35%..fails... shuts down (screen goes black)... restarts again... tries to configure again, fails again, shuts down and restarts again... tries to configure again, fails again, and finally it apparently gives up and says "reverting changes" and finally goes to the desktop.I've looked at the answers in several threads at the answers.microsoft.com forum that were started by people with similar problems, and also tried several of the Microsoft "FixIt" files on the Microsoft site, but none of them worked. I'm using Windows 7 Home Premium.
View 8 Replies
View Related
Nov 3, 2011
How to View Windows Update History Details in Windows 7 ?
View 0 Replies
View Related
Jun 21, 2010
How to Uninstall a Windows Update in Windows 7 ?
View 0 Replies
View Related
Oct 25, 2012
My windows update does not like to load! It takes a very long time and sometimes causes explorer to crash! When I checked, I had 92 updates to install. When I click download and install, it would freeze and stay there for a long time. I tried to use the Fix it application, however that gets stuck on "Checking Online for Updates" as well! What should I do? I also tried to update in safe mode, but it wouldn't let me.
View 4 Replies
View Related
Feb 27, 2012
I have an intermittent problem with my Windows 7 programme installed on my laptop.
Very occasionally when I boot it will fail to launch stating that certain files cannot be found. I didn't record exact message but it is a system 32 file error.
I am able to reboot as the start launch is there, although it resembles the old 98 start launch, and it starts up again without issue.
I know it is vague but has anyone else experienced this? It affects me say 1 out of every 25 boots.
View 14 Replies
View Related
Jul 3, 2012
Using Laplink, PCMover, I migrated all of my files, apps, etc, from my old Dell laptop (windows XP Home Edition) to my new Toshiba Satellite L755-S5169 laptop,running on Windows 7. The transfer went fine, except, every time I try to go online, there is no wireless connection. I have to go through several steps to get on our wireless network, but, it fails again on reload. I cannot get online, yet, my old computer and our other laptop both get on our wireless quickly and easily. I want to put my old laptop away and rely on the new one, but
View 7 Replies
View Related
Jan 27, 2013
on my Win7 desktop machine, DNS lookups started failing, I can ping 4.2.2.2 .Ii can access my web servers by IP , but even nslookup replies 'No response from server" , tried server 4.2.2.2, server 8.8.4.4,I have tried multiple Name server settings, all other devices on my home network are doing fine, its like DNS is blocked, I have shutdown firewalls, flushed dns, registered dns, even onlined a different Ethernet card, Eset NOD32 runs clean, Commodo FW is clean, all VPN software is removed,y Ideas ? I am 20 yr comp geek so don't hesitate to suggest something complex this is strange, only on one workstation too. I think i have a glitch in the registry for the IP stack or some kind of dns client hijack is getting past my NOD32 and Windows security
View 3 Replies
View Related
Sep 29, 2012
excess ie9 crashes prompted me to attempt a fix, i uninstalled ie9, updated the ie8 that was left after a restart, had the ie9 downloaded, after updating ie8 fully, tried to reinstall ie9, but installation aborted with Troubleshoot problems when you cannot install Internet Explorer 9 as my only recourse. i tried the fixit wizard, which just deleted adobe flash, but gave the same error message, and on rerunning it, said there were no errors to fix, so now i'm using firefox, ie8?
View 1 Replies
View Related
Aug 24, 2012
I tried to create a disk image using the Windows 7 feature. The creation failed with a message that chkdsk /r should be run on the source and destination HDs. Destination HD was error free. Source HD had bad clusters replaced in five files.Second attempt to create a disk image failed with the same message.There are no system symptoms, everything seems to be working as usual.
View 9 Replies
View Related
Oct 11, 2012
I have a Dell Inspiron 1721 connected to a new Seagate external hard drive.The Inspiron has 280GB of which 85 are free.The Seagate has 465GB with 445GB free.Several times I have attempted to back up the Inspiron and so far have been unsuccessful.The message I get is:Your last backup did not complete successfully.Windows Backup could not create a zip file. This could because the drive that Windows is installed on does not have enough space, or it could be a temporary error. Make sure you have at least 400MB of free space and try again.
View 1 Replies
View Related
Sep 23, 2012
I recently acquired a used computer and put the hard drive from my old one into the new one and it would freeze and at the Windows boot logo and then BSOD. The previous owner suggested that I get a new hard drive as the motherboard is having issues reading an already formatted hard drive. I decided to recover the bootloader by following these steps: [code] You will need to replace C:\ in the example below with the letter for your boot drive! It's most likely C:, but it could be something else!attrib -h -s C:\boot\BCD..Now it takes me to the Windows Boot Manager and says that winload.exe (0xc0000428) Windows cannot verify the digital signature for this file.
View 3 Replies
View Related
Jul 5, 2012
Although originally working, now Windows 7 backup will not work.i am running 32bit Ultimate.I have emptied the backup drive, the back up starts ... runs to about 80% of progress bar ... then fails with message Backup failed to complete.The error code is ox81000015.This says that Windows could not zip a file ... and remove any of 3 listed programs ... none of which I have installed.To be safe I also removed 7zip (even though not listed) another 2 Hr attempt and again fails.
View 9 Replies
View Related
Sep 6, 2012
Windows 7/64 SP1
I have an external drive H: attached (2.2 TB NTFS partition). The drive is practically empty.
Today I wanted to do a full backup of the system. After a while it says that the last backup did not finish successfully (translated from German).
[code]....
View 2 Replies
View Related
Jun 8, 2011
I'm back with another issue. I'm setting up a PC for recording TV and it needs Windows 7 or Vista as the OS (since they come pre-installed with Media Center). This is the PC.The specs are also included: Shuttle XPC Barebone.It contains 2GB DDR2 ram and a 500GB Seagate HDD.During the windows installation (either Windows 7 or Vista) three things can, happen,-When the disc boots up, the GUI of the installation freezes and hangs. indefinitely.-When windows begins to install and expand the files, the PC will reboot randomly.-During install, the screen will go black with only a few red pixels present.*This happens with both 32/64bit installations.I tried putting in a different video card to see if that was the issue, but no dice. Also, I know this system can run windows vista/7 because my father is using the same exact PC model (SN68SG2) and is running Vista ultimate 32bit just fine.I have already diagnosed the RAM and HDD and they are in working order.For some reason, the only OS that installs without issues is XP. Worse case scenario, I can get XP media center edition, but I'd have to obtain a disc or iso to even test it out.
View 9 Replies
View Related