Use Buffalo G54 Air Station?
Dec 20, 2011How to use buffalo g54 air station
View 2 RepliesHow to use buffalo g54 air station
View 2 RepliesI installed a HP MV 2120 Media Vault to act as a mini-server for my media files. It has not been acting very reliable, dropping out when I transfer large (>1GB) files.
The guys over at the Media Vault forum suggested I change my Linksys router for a Buffalo (WHR-HP-G54).
I got the thing today, but the software (router configuration wizard) won't run on Win 7 (Build 7000). Incompatible OS it says.
Options?
This one is really bugging me because I have checked everything, and I cannot fathom out what is causing the disconnection apart from, either is a MB issue or driver issue...?Whenever, I turn on my computer and Windows loads it will not load the USB External HDD which has been set to AUTO so it will load when Windows loads. I have tried manual switch but this does not work either. The HDD is a combo HDD with Firewire and USB 2.x although, if I use Firewire instead its fine...?What is happening is that Device Manager in disabling the device for some reason, and the only way in which I can get Device Manager to recognise the "EXT HDD" is to search for new hardware and then it works...?The only thing that I found to be a little odd was there is no set power showing for the USB Mass Storage Device 0 mA I know it is the right port location because it is the same number. There is something I forgot to mention and that is the battery needs replacing. I have never had a battery die on me on a motherboard ever. The only conclusion I can think for the reason why the battery has been drained in the ROC Logo on the MB I used to leave on and I think it drained the motherboard battery. If the power is terminated, example the PSU is turned off then I have to reset the BIOS.
View 2 Replies View RelatedI've got a relatively new 1tb Buffalo drive connected to a Laptop.Its been working fine, but now Windows 7 wants to format it.On connecting the USB cable the disk spins up OK, but then the Win message comes up saying it wants to format the disk.I'm far less keen on reformating the disk than Microsoft are because there's data on the disk that I want to keep.
View 3 Replies View RelatedI succesfully installed Win 7 x64 today to my new computer, but the problem is that I don't find or have drivers for my USB WLAN-adapter Buffalo WLI-U2-SG54HG.
I tried to find Vista x64 drivers, but without success. Do I have to change my OS to x86 or buy a new adapter?
Buffalo HD-PET640U2/R-EU?I've been having problems with the above drive (similar to this previous thread). I've had the drive for about a year & a half. It worked fine (on Win XP Home) up until a few days ago, when I connected it to my new laptop (Win 7).On connecting, a warning message came up saying that Windows had detected disk errors - did I want to scan it? I said Yes, it completed the scan (no errors), but I couldn't access any of the files in Windows Explorer. I Safely Removed USB Hardware and tried again, but said No to the error scan ("Are you sure, some files may be corrupted?"). On continuing, I could see all my files.I then selected Windows Scandisk, and once the scan completed the HDD was very slow to select. It didn't show any of my files again, and showed the following error messages whenever I tried to access it:
Local Disk (E)You need to format the disk in drive E: before you can use it.Do you want to format it?
Error checking
The disk check could not be performed because the disk is not formatted.
The disk check could not be performed because Windows can't access the disk.
Would you like to format the disk?Location is not available E:\ is not accessible.The volume does not contain a recognised file system.Please make sure that all required file system drivers are loaded and that the volume is not corrupted.I have tried it on all 4 USB2 & USB3 ports, and my other Buffalo external HDDs work fine.The HDD appears as 'Buffalo HD-PETU2 USB Device' in:
Control Panel\Hardware and Sound\Devices and Printers
Control Panel\Hardware and Sound -> Device Manager
and in
Control Panel\System and Security\Administrative Tools -> Computer Management -> Disk Management
as '596.17GB RAW Online & Healthy'. My other HDDs appear as 'NTFS' or 'FAT32', not 'RAW', and I think (but am not 100% certain) that I'd formatted the problem disk to FAT32 when I bought it.In My Computer the disk only registers as 'Local Disk (E)'.I have tried to update Drivers but Windows says I already have the most up-to-date ones for the HDD.I also tried reassigning the Drive Letter to (K), but no change.This disk was the backup for my most important files when I changed to my new laptop, and so I really don't want to lose them. I've read on some sites that I can still attempt to recover the files even if I format the drive (as long as I haven't written anything new to it), but I don't want to risk that unless there's no alternative. Equally I'd rather not try opening the drive casing up - on one forum it was suggested that the 'power supply component' for the HDD might be the problem, and opening the casing, removing the p/supply comp and running the drive in another hard drive enclosure might work.
I recently, well I say recently but it was late 2011 I decided on building a new RIG, the final hardware change was my external HDD which I bought last week and a couple of days ago I connected and copied everything from my old HDD to the new one. It's insanely fast, USB3.0 is really fast. Although, coupled with Buffalo utilities it's even faster.When I restarted my system after configuring everything in the Buffalo utilities I restarted and it was fine everything was working as it should be until I used my PC today and it booted really slow. In fact it was so slow I had to reboot it again and it was even slower than before. I disconnected the HDD and rebooted and it was there in a flash...? Okay, this is odd, I have come across this before with an external HDD but this is the first time that I've encountered a problem with USB3.0.Scratching my head and coatie I pondered on what is potentially causing the problem, I then had a EUREKA moment. The Buffalo utilities use RAMDISK which is basically a virtual HDD which uses RAM. I delayed the boot of Buffalo Utilities and rebooted and it was fine. Whatever is causing the slow boot it's being caused by Buffalo. If I delay the loading of the software it's fine.
View 1 Replies View RelatedI have a new system AMD phenom II 6x black edition and I'm using windows 7 64 bit home premium, how my Buffalo HD-PX320U2 work in windows 7 OS.
View 1 Replies View Relatedi cant figure out the the user id & default password for buffalo router
View 4 Replies View RelatedI have got G300N Air Station science along time I am trying to setup the wireless connection with pc
View 1 Replies View RelatedI'm having a problem with networking a new Windows 7 laptop with a Vista workstation. The problem is with the Windows 7 laptop. While I can access the Windows 7 laptop from tne Vista workstation, I cannot access the V station from my laptop. It shows the complete network, but cannot access the work station, telling me that my modem is at fault, which is not true. Any ideas how I can persuade my Windows 7 Laptop to access the network which it shows, and access my workstation files?
View 6 Replies View RelatedI recently received a HP notebook 110 which has a WLAN setup ( I believe this is WiFi). At home I use an older computer, a HP a1000n Pavillion with a 56k internal modem and MSN dialup. Is it possible to set up a WiFi station so I can my notebook can access the Internet? I am posting this here because the notebook using Windows 7, though my Pavilion uses XP. If this is the wrong area, please let me know and I will be move to the correct area.For anybody who wishes to reply, the answers must be complete and with a minimum of jargon so I will be able to understand them.
View 2 Replies View Relatedwant to listen to radio stations FM and AM bands on my laptop and record while playing
View 5 Replies View RelatedDell docking station driver?
View 1 Replies View RelatedI want to know if I have a 64 bit win7 pro OS on my server will it work with my work stations that have XP pro 32 bit
View 2 Replies View RelatedI receive this error stating that Windows Work Station not Started Error 1068 dependancy service or group failed to start. I tried to start the work station from services.msc but it failed
I am trying to log into my Acronis Account through their program.
This is the error in their program: x019203E8+0x019A4E31+0x019A0021+0x019A0046
new install of win7 64bit, and updates current.
have added esata port via sata port on mob; but can't locate it in device manager.
because of this, I assume that is why I can't get the eSATA cable from blacx docking station to work.
The USB cable works fine.
driver issue is only my best guess...help appreciated,and I am hoping it is simple fix.
When I remove my laptop from the docking station, the wallpaper shrinks and the shortcut icons are rearranged. annoying and time consuming.
View 5 Replies View Relatedpor favor alguien tiene el driver para esta web cam pc station, gracias
View 1 Replies View RelatedD630, Windows 7 x86 7100 RC1
I am not getting any sound out of my speakers that are connected to the docking station. All the sound comes out through the built in speakers. I check playback devices and "Speakers" is listed with nothing to configure.
i have an HP laptop in a docking station and want to connect 2 external monitors. one is connected with a vga cable the other with a DVI cable. there is a DVI port on the docking station.the monitor with the DVI cable will not come on. can i use both monitors?
View 1 Replies View RelatedSo i turned on my pc after coming home from work,sat down on the couch to watch TV first and suddenly some random death metal started coming from my PC was scary as hell.I wasn't even logged into my profile on windows!But it defnitly was coming from the PC cause i could see on my Mixer (for djing) that the sound was coming from my PC.Logged into my profile and click the mixer at the bottom right of the screen,sound was coming from MCE host i have it mutted right now because the sound is still coming from it...sometimes it also comes from internet explorer.This happens everytime i start my pc and always a different station sometimes rap or people talking ect...Cannot find anything new in startup folder either.
View 7 Replies View RelatedI have a Dell laptop on a docking station running Windows 7. Everyday I place it on the docking station and use my 20 inch monitor. Is it possible to activate the dual monitor feature and use the 20 inch as the primary and use the open laptop as the secondary monitor?
View 3 Replies View Related