I run setup.exe from harddrive and click install now then it gives "error code 0x080070490"
(Windows Setup cannot find a location to store temporary files. etc.)
I have enough free space, but it won't work.
Have anyone any ideas?
I started the upgrade and left the computer installing...
When I came back I saw a BSOD (0x0000007b (0x80786b68), 0xC0000034, 0x00000000, 0x00000000).
I restarted and saw 2 options (Windows SETUP and Windows 7).
Computer gone to Windows Setup again and showed BSOD again. So I restarted and got Windows 7 7000 again... (no changes made). I received a message saying that the upgrade couldn't be made and my original version was restored or something else...
I have no idea about the reason of the BSOD. Never had problems with 7000.
I have the 7264 ISO, and I know that I'll need to edit the cversion.ini file to upgrade to 7264.
I don't want to burn a DVD for this upgrade, so I just wanted to know what I have to do after editing the cversion.ini file.
Is it enough if i sun the setup.exe from HDD with Vista compatibility?
I have tried three both the ISO version and the version without ISO, simply files and folders, tried burning three times at slowest speed and such, but all three get a "CDBOOT: Cannot find NTLDR" I have tried it both on this desktop and also my laptop, with same problem. it sounds like there is a NTLDR file that should be on disk, but why would it only seem to happen to me?
View 7 Replies View RelatedIn the last few months I have been getting error messages in my Yahoo mail account. It will not go to next email and returns an 'Error Code 5' or recently an 'Error Code 15'. It says "Sorry for the inconvenience. You have stumbled upon an unexpected, temporary problem." This happens every other email. What are these codes and why is this happening?
View 1 Replies View Relatedi need the driver for windows 7....error code 28.My laptop is a philips x58......please help....the message i get is Mass Storage Controller Driver not installed
View 1 Replies View RelatedI tried to install 7048 X86 over my X86 7022 installation, all seemed to go well until the pc had to restart after reaching 62% of transferring files, programs and settings.
On restarting, I repeatedly got BSODs, stating a problem with inspect.sys.
Just a heads-up folks, maybe it was the torrent I downloaded (allegedly!)
i installed Windows 7 few days ago (clean install) and it worked reat till today
now when it just getting stuck on a black screen after the blue "welcome" screen
all i see is my corsor and built info on bottom right
i can more the mouse but that it, it doesnt load windows
anyone know how to fix it?
I'm trying to upgrade from 7000 to 7048.
But i only get " setup was canceled", "setup can't continue. Restart the computer and restart setup""
where can I find the log-files and see what error it is?
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+
2 Hitachi HDT725032VLA SCSI 320 gb hard drives
Nvidia Geforce 8800 GS Graphics Card
3gb of system memory
If you want to revert back to build 7048 without having to do a fresh install and re-install all your programs you CAN actually do an "Update" from Windows 7 7057 to 7048.
You'll just get a Warning that the version is older than your current and that a device or two might not work --mine indicated the Motorola sm56 fax modem -- but I've got the driver for that anyway if I want to use it.
This leads creedence to the fact tha 7057 was "an Interim" build never intended for serious development use whereas build 7048 was actually part of the "True" development cycle.
Maybe my English might be mis-understood here -- I am NOT implying that build 7057 is a FAKE but just that it is a "testing" type build designed to check out certain parts of the process -- for example a lot of people experience longer install times before the Language menu comes up (perversly the better your gear the longer it takes to "start").
My advice would be that if you haven't installed 7057 don't bother --stay with 7048 until the next decent "leaked build" or the official RC1.
At least you won't have to look at the HIDEOUS logon screen.
i'm using XP x64 edition and looking to install 7, yet i don't have a DVD burner.. could anybody help me install from HDD or is it poss to upgrade??? On my 1st hdd i have 4 partitions, 1 10gig completely clean. My 2nd hdd has 3parts, 1 with 40gig completely clean.. i also have a 2gig SD card. Would be gr8 to get this done..
View 8 Replies View RelatedI have Windows vista 32-Bit service pack 2, and I am trying to upgrade to Windows 7 64-bit. I downloaded Windows 7 from my school, burned it to a DVD and when i click on Setup (Windows Installer) i get this message "C:UsersMarloneAppDataLocalMicrosoftWindowsBurnBurnsetup.exe,This version of this file is not compatible with the version of Windows you're running. Check our computer's system information to see whether you need an x86(32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
View 4 Replies View RelatedI've been using the same USB drive to install previous versions of windows 7 (both x86 and x64), but when trying to do the same with 7264 x64, I get an error during the install process asking me for drivers. I assume it isn't referring to drivers for the HDD because when I click "browse" to find the drivers, the drive and its partitions are listed.
has anyone else run into this problem?
Check out this thread for help if you are experiencing the same thing: How to make Windows 7 x64 use ALL your Memory!
View 2 Replies View RelatedCan someone confirm that it's a general problem or have I just got a bad D/L.
If I try and UPGRADE from Windows 7 build 7048 X-64 to Build 7057 X-64 it starts OK but after a while (during the expanding files stage) I get error -- some necessary files for installation cannot be copied ??
Clean install seem to wok.
HA1 and checksums of my iso seem correct.
Actually upgrading from a beta to another beta is not a goood idea anyway but I want to make sure that I haven't got a bad D/L before I try an upgrade from a Vista installation.
I am using Windows 7 32-bit Premium. I'm trying to run a Batch file with several dll's, and I'm getting this error:Banner: Error Occurred - Add LicenseBody: Unable to enumerate resources. Error Code: 15106I have tried to google this, but I haven'tAlso, if I even try to register any of the Batch's DLLs manually, I get this error:Banner: RegSvr32body: The Module "C:Bla Bla Bla...." was loaded but the call to "INSERT DLL HERE" failed with error code 0x80028011c.For more information about this problem, search online using the error code as a search term.
View 1 Replies View Relatedi downloaded a disk image iso file for one of my programs. i mounted and ran the image. the setup.exe file runs fine but when i make any selction i get a "error calling shell execute. error code: 5" message and the program terminates.i tried it on a xp machine and also burned a cd but am still getting the error message
View 1 Replies View Relatedsince i down loaded windows 7 my solitaire hardware acceleration it seems has been disabled
View 3 Replies View RelatedI just upgraded my computer to windows 7 and Everytime I click on a games as simple as solitaire I get the error message Hardware acceleration is either diabled or not supported by your video card driver make sure you have the latest video card driver installed and that the hardware acceleration is turned on. how to turn on Hardware Acceleration much less know what it means lol
View 8 Replies View Relatedi have tried winiso, magiciso, etc to add the cversion.ini file to it but none of those allow it to work. Need some help, what is the way to make this happen?
View 8 Replies View Relatedi've tried every product key i can find, including the ones generated with my live ID. every one says invalid key. any suggestions?
View 5 Replies View RelatedI want to upgrade my w.7 from build 7100 to 7264 but I have photoshop and other programs installed on build 7100 and I want to know if these program will still work without any problems after upgrading.
View 5 Replies View RelatedMy upgrade from 7100 to 7264 failed. I had the same problem when upgrading to 7100 and had to reformat my drive. Here's the problem: at some point when transfering files and system settings (2nd step I believe) the C drive becomes currupted somehow. The OS still runs and boots, but the drive shows up as "access denied." The sizes under properties are all 0.
I'm using the computer to post this so it still runs, but the drive is desperately crippled. I think the partition table is messed up somehow.
Any ideas?
How do I do an in place upgrade from build 7264 to RTM?
View 2 Replies View RelatedI am having great difficulty downloading and installing AVG 2012. Keeps on saying goodbye before installing and i am getting message that says MSI engine failed to install. Can't download. have tried 2 system restore points but still same.
View 1 Replies View RelatedI can't install Windows Live. The installer keeps rolling everything back after 99% of the process. For the first time it failed it only installed MSN and Mail and the rest was rolled back. Since then it doesn't download the installation files any more as the old ones are stored somewhere on the disk and it uses them for the installation. Guess the problem occurs because the installation files are corrupted but how do I force the installer to download the again? Looked everywhere and can't find the place where the old installation files are stored...
Just in case, the error i'm getting after the roll back is:
'try installing win live programs again. progs were not installed because the installation was cancelled. aborted: 0x80004004'
I have a repeatable BSOD every time I wake my machine
Hardware has been running 7229 x64 without issue.
The BSOD seems to be random.
With other apps open, I never have a problem (put the machine to sleep and woke it 20 times with different combos of apps open )
With media center, I have the problem with fullscreen or windowed and whether it is in focus or not.
Did not have this problem with 7201 (did not check with 7229).
Anyone have any suggestions?
I have changed my graphic card (MSI N560GTX-TI) and new PSU (Corsair GS 700) and now my PC does NOT start, it gives me an error message: "error code biohd-2 warning no drives detected".Checked the cables, SATA ports, hardware diagnose, reset CMOS, removed the motherboard battery and nothing...My HD is a WD Caviar Green 2TB.
View 4 Replies View Relatedwhen i try hooking up usb ddevices to my port ANY of them i get unknown device and when i double click that from device manager i get that error
Windows has stopped this device because it has reported problems. (Code 43)
I having a popular problem 643 and I have tryied several sugestions but the problem still exist.The first of many updates that fail was on 6-10-2012 Framework4 KB2656351 plus 8 or 9 more with different numbers.I got this information by clicking on display updates, I do not know if that is the right way to get the code name for the updates or if there is other way. If there is other way to get this information please let me know, I am a work in progress.
View 4 Replies View Related