I've been using the same USB drive to install previous versions of windows 7 (both x86 and x64), but when trying to do the same with 7264 x64, I get an error during the install process asking me for drivers. I assume it isn't referring to drivers for the HDD because when I click "browse" to find the drivers, the drive and its partitions are listed.
has anyone else run into this problem?
I can't install Windows Live. The installer keeps rolling everything back after 99% of the process. For the first time it failed it only installed MSN and Mail and the rest was rolled back. Since then it doesn't download the installation files any more as the old ones are stored somewhere on the disk and it uses them for the installation. Guess the problem occurs because the installation files are corrupted but how do I force the installer to download the again? Looked everywhere and can't find the place where the old installation files are stored...
Just in case, the error i'm getting after the roll back is:
'try installing win live programs again. progs were not installed because the installation was cancelled. aborted: 0x80004004'
Check out this thread for help if you are experiencing the same thing: How to make Windows 7 x64 use ALL your Memory!
View 2 Replies View Relatedi have tried winiso, magiciso, etc to add the cversion.ini file to it but none of those allow it to work. Need some help, what is the way to make this happen?
View 8 Replies View Relatedi've tried every product key i can find, including the ones generated with my live ID. every one says invalid key. any suggestions?
View 5 Replies View RelatedI have the 7264 ISO, and I know that I'll need to edit the cversion.ini file to upgrade to 7264.
I don't want to burn a DVD for this upgrade, so I just wanted to know what I have to do after editing the cversion.ini file.
Is it enough if i sun the setup.exe from HDD with Vista compatibility?
I want to upgrade my w.7 from build 7100 to 7264 but I have photoshop and other programs installed on build 7100 and I want to know if these program will still work without any problems after upgrading.
View 5 Replies View RelatedMy upgrade from 7100 to 7264 failed. I had the same problem when upgrading to 7100 and had to reformat my drive. Here's the problem: at some point when transfering files and system settings (2nd step I believe) the C drive becomes currupted somehow. The OS still runs and boots, but the drive shows up as "access denied." The sizes under properties are all 0.
I'm using the computer to post this so it still runs, but the drive is desperately crippled. I think the partition table is messed up somehow.
Any ideas?
How do I do an in place upgrade from build 7264 to RTM?
View 2 Replies View RelatedI run setup.exe from harddrive and click install now then it gives "error code 0x080070490"
(Windows Setup cannot find a location to store temporary files. etc.)
I have enough free space, but it won't work.
Have anyone any ideas?
I have a repeatable BSOD every time I wake my machine
Hardware has been running 7229 x64 without issue.
The BSOD seems to be random.
With other apps open, I never have a problem (put the machine to sleep and woke it 20 times with different combos of apps open )
With media center, I have the problem with fullscreen or windowed and whether it is in focus or not.
Did not have this problem with 7201 (did not check with 7229).
Anyone have any suggestions?
I am currently running OS 7 Beta RC Build 7100. Were do I get this newer version, is there a big difference? And am I able to upgrade to the newer Beta?
I realize that October is fast approaching for the RTM but I plan to keep running the Beta for a couple of months past the Grand Opening.
Is it possible that all the updates that I have received equally add up to the newer build?
I am getting an error "cannot install" 0x80070714 when I try to install windows 7 into a clean disk and the installation just stops..
View 3 Replies View RelatedAfter I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
View 2 Replies View RelatedPer microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
View 9 Replies View RelatedI have changed the ram and that fixed most NOw this one when w7 starts it looses parts like no disc drives no device manager no modem and so its a restart and they return untiull next time then it all stops again.some programs run slow internet pages are real slow changeing.I cant install word packages it crashes and now on install it comes up with cant find network.
View 6 Replies View RelatedI have a few small .exe files that I received by e-mail. When I click on them to install the program I get a message saying Windows is preventing running the file for security reasons. I know the file is free of viruses and want to install it. I am told there is a setting somewhere to turn this security feature "off"--I am the only user of my PC and want this annoyance turned off.
I am running Windows 7 Pro 64-bit on a stand-alone PC with a hardwired Internet connection (no router).
I've built a brand new PC and decided that I would like to install windows 7 64 bit on my SSD, I got a disk+key from my university before christmas so that'd i'd be ready once i'd built it.
I built the PC yesterday and realised that I'd left my external DVD drive at my university accommodation, I'm at my parents house for christmas break so that's a few weeks left. I can't really wait that long so I used my parents laptop (which I'm posting from now) to turn the disk into an .iso and use the microsoft USB utility to make a USB stick that i could install from.
However when I tried the install gets to 'installing features' and gives 'windows cannot install required files' error code 0x80070570 I looked the code up on google which sent me to a lot of threads here, so far I've tried:
Taking all but 1 stick of ram out and the graphics card. Reseting the bios to default Installing again without rebooting after error. using cmd to select the right partition
tell me if a re-install from a system image file on my notebook is as good as a clean install from say a retail disk.I can not format all my drive and start a fresh. Can my System image file become glitchy or infected with a virus.?
View 5 Replies View RelatedFirst off this is a newly built computer, all fresh components. aftercleaning/activating the hdd via shift +f10 at Windows 7 setup,(which took me a day to figure out) i was very excited to see my hdd available for Windows 7 installation. as i proceed windows does its thing, after installing its time for the first restart. it restarts right back to the initial windows 7 setup ive done a lot of research, and majority of the problems seem to be the boot priority in bios. so i made sure that it was usb-hdd, then hard drive. (Windows 7 on flash drive for me, no dvd burner available). still the same thing, right back to initial setup. i tried maybe to remove the flash drive during the 10 second countdown to restart, but when it restarts, the windows splash screen comes up and then blue screens and restarts real quick. cant see what the error is on bsodthere have been a couple different start up issues, "windows did not start properly" "select version of windows to start from" (or something to that effect.) but its all the same outcome. windows 7 just wont finish installation
View 3 Replies View RelatedI'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
How do I install a Super Multi Drive to a mini computer HP 110? I have the device and the installation disk, however, the computer does not seem to be detecting it or providing an installation wizard for me to proceed.
View 3 Replies View RelatedDoes anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
View 3 Replies View RelatedNT Kernel & System rises to top of list in task manager and then just totally stops installs from proceeding. I have fought NT Kernel & System on 3 computers running Win 7 x64 ever since Win 7 has been out. No one yet that I know of has been able to solve the issue. I now need to install Java and can't because of NT Kernel & System stops it. I have tried everything on every forum and sites l find with Google searches. Nothing has worked yet.
View 2 Replies View RelatedInstall LG Super multi drive install disc for windows
View 1 Replies View RelatedI am part of a large organization that has a large amount of computers on our domain controller. I have Administrative rights to the computers only, and network access rights on our network. I keep a number of computers up to date, including various 3rd-party programs (i.e. java, flash, etc), and I currently manually remotely connect to each computer and install the updates to the programs from a network share, then run Windows update, select all the critical updates (as well as all the applicable optional updates), then disconnect and move on to the next one. Needless to say, time quickly adds up.
View 3 Replies View Relatedyou will need VISTA install disc and a windows 7 install disk..first upgrade XP to vista then upgrade XP to windows 7
View 1 Replies View RelatedI have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
View 9 Replies View RelatedI am trying to install office 2007 as part of a system rebuild after installing a new hard drive. I get a window saying install was successful, I can open power point or excel but when I try to open word it hangs up at the word logo page. I have done remove programs in control panel, I have used revo uninstall to try to clean the registry. I suspect a corrupted fragment in the registry but don't know how to get at it.
View 1 Replies View Relatedone of my co-workers wants me to get rid of some viruses and install office 2010 home and student on her computer with the key she bought. her computer runs windows 7 64-bit. after backing up her data, i finally ended up doing a factory reinstall from the backup partition. so i downloaded all windows updates and installed antivirus and firewall software. then i downloaded the office 2010 trial and tried to install it. it seems to begin installing without any problems. then a splash screen for powerpoint appears. it says that its "processing" and does that for about 20 minutes and then there is a balloon that pops up saying that office is downloading files. after all that happens, an error message appears that says something like "powerpoint cannot be opened. please try again later or repair this software in the control panel" with no sort of error code. i then tried repairing it from control panel which claims to complete successfully. so i restart and try to install again and the same thing happens all over again. if i try opening word, excel, powerpoint or onenote the splash screen appears and does the same thing that i described powerpoint was doing. ive tried uninstalling and reinstalling to no avail. i also tried installing the 60 day trial for office 2007 that came preloaded with the computer and then installing office 2010 over it. same thing happened.
View 6 Replies View RelatedI have a problem with my laptop when trying to re-install Office 2013 preview edition - basically the initial install failed for some reason and can I can neither remove or install this software leaving me in some sort of Microsoft limbo.Someone I know suggested logging onto the "my account" section of the Microsoft site and actually deactivating the install however that has not solved the problem?CCleaner has also been run to try and remove any redundant registry entries however again that has not solved my problem.
View 2 Replies View Related