i'm using XP x64 edition and looking to install 7, yet i don't have a DVD burner.. could anybody help me install from HDD or is it poss to upgrade??? On my 1st hdd i have 4 partitions, 1 10gig completely clean. My 2nd hdd has 3parts, 1 with 40gig completely clean.. i also have a 2gig SD card. Would be gr8 to get this done..
View 8 Repliesmake a dualboot comp by adding windows XP to a new partition. I created the new partition with 20gb. (From the 500 of my actual harddrive)But before I actually installed on that, I got distracted with a second harddrive that my dad got(for no reason). It had a full copy of Windows XP backed up on it from another computer, so I figured I would just use that for the dualboot. I plugged it in (wired the same way as my old harddrive, but different data slot), restarted, checked the harddrive in explorer - all the data was there / reading correctly / etc, and I used 'easyBCD' to add the new harddrive to the boot list.(Which, of course, crashes if I try to start it. I just wanted to see what it would do). For a reason I can't remember, I unplugged the second harddrive for a bit, started the computer on accident (I don't know if anything loaded before I shut it off), and then when I plugged it back in.Windows 7 would not launch. It goes to a DOS-like window, except it's just a flashing _ and it never does anything even after a few minutes. XP didn't work still.. so I decided to reinstall XP (as I couldn't tell which harddrive was which on the list, I unplugged the main harddrive while installing onto the new).. and when I did this.. it formatted and installed fully... then restarted.. then restarted.. and restarted.. and just kept restarting, never showing any thing past the manufacturer logo/BIOS load-button-message-thing. So, I then try to use my 3-disk Windows7Recovery disk(burned myself with a program apparently included by the manufacturer.) It installed fully, appearing to work.. but when I launched it, it said "Invalid Partition Table" and wouldn't boot past that. When I insert my driver installer disk, it gives me a basic DOS window thing. dir A: shows the files in the disk. dir B: for some reason shows the same. C: says "Error reading from drive C: DOS area: general failure". All other letter:'s just say "invalid drive". (I'm doing this with both harddrives in.) I attempted connecting the harddrives to an old computer, but it gave an error for both. (It detected the harddrives, but said it had an error reading from it. Windows Explorer asked me to format it... {i'm willing to format one of the drives if anybody thinks it will help, but the old harddrive has data I'd prefer not to lose.} ) Looking on google, I saw several problems that all have similar problems (less overdescripptive than I am though) but none of the fixes suggested worked for me. Also - as I have two different with different errors, I only need to make one of them work.)Also - my other available computer has a CD burner / floppy drive if either are required. I also have several USB's. The computer can boot from USB's and CD's (tested), and I could easily take the floppy thingy and connect it to the computer.also - this computer is probably still under warranty unless unscrewing the hard drive voids it. .. does that count as modification of the computer?
View 5 Replies View RelatedI have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.
My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)
I just ordered a new computer with windows 7 professional 64. My old computer has Windows XP. I would like to install the old hard drive in my new one (new one has a bay for 3 hard drives). After the installation, will I be able to access files from the old hard drive?
View 5 Replies View RelatedI want to replace my C drive with a new WD 640. Can I disconnect my existing C drive - 3 years of XP and 1000s of files; install new WD drive; format and do new install of W7. Question: when I reconnect old C drive, will W7 have access to all those old files? Seems like a simple way to clean install W7 - start with a NEW drive.
View 2 Replies View Relatedi have hard disk problem that keeps poping up on my screen..then it says HDD/SSD WILL FAIL BACK UP YOUR FILES AND CONTACT YOUR MANUFACUTURE..can i fix this on my own
View 6 Replies View RelatedMy rig recently had a few problems with external hard drive so I decided probably a corrupt windows install and tried to reinstall Win 7. Everytime I try to install, I get to that blue windows 7 background (the one you see during the whole install) and a mouse cursor. I can move the mouse cursor, but it never moves from there. I waited 30 minutes to no avail.
So far I've tried
- Clearing BIOS
- Trying with only 1 stick of ram, with each stick.
- Reseating graphics card
- Cleaning heatsink/grills
Still nothing, it just get's stuck there. I've reinstalled Windows using this same disk, on this same desktop, a good 3 or 4 times. The disk is fine, I also know, because I installed it on a friends PC not even 2 weeks ago (after I started having the problem). I can no longer reboot into Windows, nor install it. Also tried another new hard drive to install it on, same thing.
Specs:
AMD Phenom II 975 BE
8GB DDR3 1333 RAM
450 GTS 1gb GDDR5 (Galaxy)
500w PSU ( I believe CoolerMaster or Hyper... not sure)
M4N68T-M V2 Asus Mobo
Still using my old 160GB PATA drive
Completed an install from XP to 7 by copying the install disk to my lap top hard drive, then running "setup".
Thought that this would delete the all of the old files. And, indeed, when I search for known file names, the search comes up empty.
However, the properties of the disk show the same amount of disk space used as before the install.
How can I remove these "ghost" files?
If Drive 1 is an SSD drive with the OS on it. If Drive 2 is blank regular hard drive. Is it possible to install software on Drive 2 using Drive 1 as my main boot drive? Drive 1 has room for some software, but not all. So I want to know if it's possible to connect a 2nd regular hard drive to install the rest of my software on.
View 9 Replies View RelatedI have two other hard drives in my computer. My operating system now is on "E" drive. I'm wanting to replace my "E" drive with a larger and faster drive.
I am currently backing up my entire "E" drive on my "C" drive.
Is it possible to simply pull out my current "E" drive and install a new "E" drive and then restore my backup to my new "E" drive? Or is it more complicated than that?
cna i copy my windows 7 cd (dvd) to an internal hard drive and install windows 7 to another internal hard drive without the need for a disc? Windows 7 is the only time I have used physical media for a long time and would prefer to not have to use it. I understand you can store an image of a working system and restore it but what about a clean install?
View 2 Replies View RelatedI have a laptop for each of my kids, they are both Toshiba Satellite with windows 7. The hard drive went out on one of the computers so i bought a new hard drive for it. Toshiba did not provide a CD for either of the computers for recovery or a new install. I have been looking through internet and forums for hours and i cannot find a way to just copy the windows 7 from one of the computers and make a disk i can use to boot the computer with the new hard disk, or is there a way to hook them up USB to USB. I have a valid activation key so im not tryng to do anything illegal, i just need to figure out how to get windows 7 onto the other computer.
View 4 Replies View RelatedI've been having the Windows Home Security 2012 virus for the past couple of days, been using Malwarebytes with no results. As of now, I have a master (140gb C and D) and a slave (250gb E).y C drive is the system drive, D drive was where i had Windows Vista (this was a dual boot machine originally). I noticed one day that my D partition was completely empty for some reason, I tried to format that drive and i got the bad sectors error.Now here i am trying to run windows 7 ultimate installation from the desktop, I choose the customize option to wipe out everything on the drive. Now the only drive that is visible is the master, showing C and D (Disk 0 and Disk 1). For some reason my large E drive isnt visible.
I continue with Drive C and I get the error stating that Windows 7 cannot be installed on this drive, there is no reasoning behind this.I unplugged my master drive from the mother board and reset my jumpers on the slave drive to Cable Select, even tried the default master arrangement regardless of which SATA cable is being used. I put the windows disk in the DVD drive and change my boot order to reflect the DVD rom....I don't get a prompt to boot from disk for whatever reason so I am stuck.I would either like to install from the desktop to my E drive (i'm thinking of shrinking and creating a new partition for this before i try again)...or just overwrite my system drive and start fresh.
I just installed a new hard drive for a HP Pavilion dvd5 Model 2132dx and I don't have the original system cd, but I have the 6 recovery cd (computer was bought from Best Buy). I placed the 1st recovery cd and chose the Factory Setting. I got this error 0x30epooe. What does that mean and is there away to get install windows 7.
View 9 Replies View RelatedMother: "Hey, my computer stopped working the other day, could you fix it?Me: "Of course."It is a base HP Pavillion a4302f.Original problem was "BOOTMGR Missing".Easy enough, was able to fix that through an installation disc using Startup Repair. The PC then rebooted into the same screen. So I tried Startup Repair again, but now it doesn't see any Windows installations. I even tried to reinstall Windows to see if it would see the drive, and it does not see any drive to install to.Then something along the lines of, "DISK BOOT ERROR, Please insert bootable disk and try again." decided to pop up during one of my reboots. I checked BIOS. BIOS doesn't see the hard drive anymore.After resetting BIOS to defaults, and doing the SAVE and EXIT, the computer restarted and it hung on the HP screen before BIOS. The screen that shows ESC to Boot Menu, F10 to Setup, etc.Somehow along the way I did a power cycle of unplugging the cord and holding the power button for 60 seconds. After doing that I was able to get back to a functional BIOS or Boot Menu etc., where before it was as if it didn't recognize me hitting the keys.
After checking connections and reconnecting the hard drive, the computer was seeing the hard drive again. So I began Bootamania. Side note: whenever the computer restarts itself via a Disc or through Exiting BIOS, it returns to the frozen HP screen. So whenever I need to try something again I HAVE to unplug power cord for 30+ seconds to move forward.At this point I began trying XP, Vista, Windows 7, Ubuntu, all on DVDs, and a couple even on USB. They all hang at numerous locations.I would give error codes, but the codes were different at different times, and I googled them, and they are mostly generic.Windows 7 usually stalls at Expanding Files 0%, if it even allows me to install to the disk. Usually it says this disk can't be used, or the 'Next' option is gone, or I try to Delete, Format, or Partition and it fails to do so and the Drive disappears. Ubuntu got the farthest, until something with the graphics card I assume made it crash too.
I ran some SMART tests on the disk within BIOS and an older message I ignored came up, "HARD DISK FAILURE IMMINENT, REPLACE HARD DRIVE.OK, after all of this, you don't have to tell me again.I came home earlier with the new hard drive. Popped it in, and mostly the same stuff, except this new drive sounds much better and is always recognized, where the other one was recognized 2/3 times.I took the original drive and stuck it into an older desktop I had, and was able to install Ubuntu on it completely and successfully. That bothered me because I considered it dead. That aside, I tried installing Windows 7 to the drive on that older computer, and it failed numerous times, and then finally worked. I tried to take the drive from older computer into the original computer and it booted to it, then froze at the Starting Windows.If you skipped most of the above, the short version is this: I assumed the hard drive was dead and got a new one. Now even the new one won't work in the problem PC. I even replaced the PSU to a spare just incase everything wasn't getting enough power
So I cannot format my secondary hard drive where Windows 7 RC was installed. Did I install Windows 7 incorrectly onto my system? I've posted a screenshot from my Computer Management window.
View 4 Replies View RelatedCan I use a Windows Home premium upgrade version to install a clean 32 or 64 bit Win 7 on another internal hard drive?
I currently have Vista HPrem 32 bit on C drive and PC is 64 bit capable. As I use PC in home office I am not ready at this time to perform any upgrade/clean install on the C drive
I want to make sure I can dual boot if it can be done.
Wanted to install Windows 7 Professional on a new 320GB hard drive. (Windows Vista was installed on an 80GB that was filled)
#1. Installed new drive in system – had to format in Windows Vista (Assigned drive letter B: because c: was already in use by old drive)
#2. Installed Windows 7 Pro on new 320GB B: drive
#3. Booted to windows 7 on new drive (had to select between Windows 7 or Windows Vista because both drives were installed)
#4. Copied user profiles from Windows Vista hard drive to Windows 7 hard drive.
Problems
#5. Windows search will not find anything in the users' documents folder, although everything is there. Document library will show when "arranged by folder" but if you change to "arrange by date modified" or anything else they all disappear. Also Windows file index will not index any files.
#6. Unhooked old hard drive, new hard drive will not boot by itself, says invalid system disk
I am trying to install windows 7 home upgrade onto a new hardrive i have bought for my laptop,but it says the product key is invalid.I purchased the genuine windows 7 software from asda/walmart,and orginally installed it on my laptop which was running vista,so i just upgraded using the windows 7 upgrade software which worked fine.Then i had so many viruses etc,i decicded to buy a new hardrive and then load the same windows 7 home upgrade software by doing a clean install,but when it came to activate the software it gave me a code and said error product key not reconised.
View 1 Replies View RelatedI lost all of my data because my harddrive died. I bought a new harddrive, have it properly installed and everything, but every time I go to turn on my computer it says to reboot with usable disc. I have windows 7 in the cd/dvd drive, but it isn't running. What can I do?
View 1 Replies View RelatedThe main thrust to all this is:why can't win 7 tell me or let me install an os to a separate hard drive that's ready to go for an install.
I have a hard drive that is recognized in win 7/recognized confirmed formatted, NTFS basic, primary partition active.
I want to install xp pro on it. But i can't get the install disc in the cd drive to ask/search for this drive [f] to install on.
Tried copying all disc files to install to the desired drive, but again, get message have newer ms os[assume win 7 which is only on "c" drive].I don;t know why no path is offered.
Not able to find help answer to this.
I did see related post about using an acronis home 10 drive image: no goof proof answers there- I have another xp- xp media center 2005 imaged on acronis from that computer.
that's my first choice.
Goal: to get functionality for blu-ray playback. needed software compatibility not in win 7 64bit [yet?]
software needed to support> anydvd hd, elby virtual clone,powerdvd ulta 9 for iso image playback.
1st pick-aconis image,don't care about getting on line,registered or anything to disable my registered xp media center on the acronis image. I just want its full remote functionality.
2nd pick- xp pro; I should get back program funtions without the remote ability.
3rd pick- Vista home premium 64bit, which had full functionality; being in a holiday hurry, I skipped making backup copies of this os that originally came with the computer [gateway DX4200]
which did run everything.
I install upgrade win 7 64 via custom to be clean.
I hate vista,and now will have to spend $ i don;t have just to order installation discs, but doable.
I assumed all this would be easy.
I'm trying to revive my laptop with no cddvd or hard drive by installing windows 7 onto the flash drive and running it all from tjhere
View 8 Replies View RelatedI would like to install Win 7 to a new Hard Drive. I have the Win7 Upgrade CD. I have XP running on an old HD that came with the original PC. how I can do this?
View 6 Replies View RelatedI just got my mother's computer back from a repair shop (they've changed the graphic card, the motherboard and the processor, the hard drive stayed the same)
It is a SONY VAIO VPCEE25fx.
I used my Windows 7 Ultimate OEM CD I had when I bought her the computer. But then, at the Custom Install step, it says No drivers or hard drive found. I've tried to reload, scan...none. I'm sure the hard drive is ok.
wasn't really sure if that would work since it has to be in the program files can i? bc i have several games and would rather have them on my TB that on my internal HD.
View 8 Replies View RelatedI'm doing a clean install on my computer, and it's going alright until it asks me to choose which hard drive I want to install Windows 7 on. Apparently I have 2: a C drive and a D(Recovery) drive.What should I do in this situation? Should I just install on the C drive, or should I do what it says here: Partition the Hard Drive in a Windows 7 Install and delete the partitions and create a new one.
View 7 Replies View RelatedI wish to have a method to install windows 7 (Or any OS for that matter) from a hard drive that contains just the installation files. I am aware of creating system images, ghosting and that whole scene but it's such a long winded process compared to just burning the CD again (Original is in storage and no I don't want to go get it ).
Pretty certain this can be done with some kind of DOS program that is loaded from the drive: When it is selected as primary boot. However, I have no experience with programming DOS applications, or if this is even possible (Pretty sure it is given DOS boot rom's exist).
[URL]
is it possible to somehow partition a NEW CLEAN hard drive and copy windows installation files from mounted iso and make that partition bootable to install on a different partition on the same NEW/CLEAN hard drive? on a different PC? its cuz im a tech and i left all my flash drive and cd's somewhere else XD and i gotta install =P i pretty much want to be able to put the hard drive into the new pc and have it boot to the disk and install to the same.
View 6 Replies View RelatedI'm installing Windows 7 64bit Home Premium on a Dell Inspiron 1545. Right after the Starting Winoews logo screen it gets stuck at a Dos terminal. the Dos terminal it says: X:windowssystem32> The window itself is titled Administrator: X:windowssystem32cmd.exe, I am using the OEM disk that came with the laptop and I also downloaded one from Dell's website. Both give the same error.
View 6 Replies View RelatedI have just bought a brand new hard drive due to my last ones controller failed.
Western Digital Caviar Black 500gb
So the problem,
Did a fresh install of win 7 (Build 7229) two nights ago, all installed perfectly, next day (yesterday) went to boot up pc and had the dos error message - Disk boot failure, please insert system disk and press enter.
My first impression was it may have been an install failure, so i formatted the hard drive and reinstalled. shutdown the PC and rebooted up and i had the same error message, now after this, i got my failed hard drive out and after a lot of faffing around, BIOS found it and it gave me the same error message.
Can anyone tell me what the problem might be. I have tried Windows startup repair, did not fix.
BIOS settings are
First boot device is Hard drive
second boot device is CD-ROM
(I have even swapped these around to boot from windows 7 and it just starts the setup procedure of installing windows drivers) I have even set boot order of HDDs so my main windows HDD is up top. Anyone got any clues.