This caught my attention today when I was installing the newest round of windows 7 updates, and has me curious, can't say I've ever seen it before so I've looked around and it seems that it used to only be for XP. Any way, from what I can tell from the description it seems to only be needed if your running internet explorer, I don't use IE on this computer (my gaming rig) and don't see why I'd ever have to, I do most of my browsing on my phone, or laptop.
It all started when i inserted a SD card. It didn't work so I inserted the SD card on my camera and plugged it in by usb. The second I inserted the usb to my laptop my usb mouse turned off and my wlan just literally vanished(it wasn't even in device manager.) Usb root hub with exclamation marks appeared in the device manager.
I tried uninstalling them and letting Windows 7 install them again and wlan wont come back and the mouse wont work.
I also tried uninstalling everything below usb conrtollers and generic volume and still no wifi.
I tried installing the drivers from the manufacturer of my laptop after uninstalling the old ones and still none
I was able to get the wlan running again after uninstalling everything below usb controllers in the device manager I restarted my comp in the middle of it cuz wlan reappeared and if i waited for it to finish wlan would disappear.
Now Every time I plug in a usb device wlan disappears and everything starts all over again..
I've been running various Windows 7 Betas and RCs on virtual machines and spare PCs for a while with no issues, so when I got access to the RTM I was quite confident (probably overly so) to upgrade my laptop from Vista.
Right after the install (ironically enough, from a USB), everything was working fine, until I plugged in my iPod, which installed the apple driver successfully, then informed me that the device was unplugged before the USB Mass Storage driver installed (it wasn't). I proceeded to try the other three USB ports on my computer (all four worked fine in Vista, and still work fine in XP and Ubuntu). None worked. I tried a thumb drive with an internal LED, and it appears that the device receives power for about half a second, before cutting off. Running a system restore back to whenever they were last working fixes the problem, I can plug in a USB stick, and it works fine for a couple of minutes, then its useless again.
The chipset is an Intel GMA965 express series, using the most recent driver (8.15.10.1825, for RC1). I've tried rolling back to the Vista driver, and the Vista driver in compatibility mode, to no avail.
Additionally, I've tried uninstalling all of the "USB Root Hub"s in the device manager, and scanning for new hardware, and uninstalling all of the USB controllers and then scanning for new hardware, still no luck. The issue that windows gives is
"Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"
For which a fix for a similar problem (albeit with CD/DVD Drives) in XP was to delete the registry key, so I navigated my way to
And was first told access is denied. I took ownership, fixed permissions, and it still refused to delete (although, in trying to check what exactly the error message was, it just deleted now, although I'm not hopeful it will help)
I've disabled every reference to USB power saving mode in every power profile.
Most recently, I've tried the most recent Intel Device Chipset Installer, which installed successfully, but makes no difference. I also tried the built in troubleshooter, which recognises the issue, reinstalls all the drivers, and tells me it works/doesn't work, and then either way, it doesn't work. Although the troubleshooter does identify if there is a device plugged in for two of the four USB ports, it tries to install drivers, and fails.
In searching the internet for the last few days, I haven't been able to find a solution (although I have found several people with similar problems, one the same, all of which unsolved)
I would really prefer not to do a clean install - the reason I upgraded in the first place was because I had far too many programs installed to make it worth reinstalling all of them. I'm open to downgrading to vista, if its do-able with a clean.
If I browse my Windows 7 PC via UNC (\192.168.0.x) on an XP PC I am unable to get a list of shares. If I Directly open \192.168.0.xShareName that will work perfectly. I have a vista PC on the same network and that can see the root fine. The only thing that I can think of is that SP1 has done something. but not sure why it would only effect showing the list of shares. As a side note in the event log i see the "Software Protection Service" keeps stopping and then starting, I tried googling it but no one seems to know if this is usual behavior to check the licence or if it shouldn't stop.
I'm looking to find where i can download something, somewhere, over the rainbow some newest bestestsss drivers for usb 2.0. I tried looking myself on the web but it seems a few things require you to pay money for an upgrade of all drivers on your system. I'd just like to upgrade my usb ports if possible I seem to have trouble with em.It says it has 6.1.7600.16385 (in 2006 so theres gotta be somethin better) installed I found a few downloads but they were actually older 5.x.xxx.
I'm running Windows 7 64bit. I regularly access a work website that has a self-signed certificate. I got tired of the warning message that always pops up regarding the untrusted certificate, so I installed the certificate. When I used to run XP, that solved the issue. However, for Windows 7 64-bit, that did not fix the problem.
I've also tried installing the certificate into the "Trusted Root Certificate Authorities" store for both my user account and for the computer. That didn't fix it either. Finally, I tried changing the security zone for the site to be in the Trusted Sites list. That also didn't fix the problem.
I find it very irritating that a website that has a "trusted" certificate is giving me a warning message about an untrusted certificate. I wonder if this is related to the Windows 7 64bit driver signing nazi-ism (i.e., you can't load device drivers signed with non-Microsoft certificates, even if you install the certificate). Just for grins, I tried disabling driver signing enforcement, but that didn't change anything either.
Just looking at my root directory and trying to clean up what is not needed. I have Win7 64 bit. Can I delete any of these files??.rmd{45F28847-516F-40B7-9C6C-7A08E848927B}{03793A38-AB8E-48AB-B8DE-C78202EOFC83}{97782997-1B5D-4500-8514-8DCC63EFF45E}app_messagelog.scvlog install.exeinstall.iniinstall.logjava_log.txtmsdia80.dll
I upgraded from 32 bit to 64 bit, but when I used my back up recover program, all my files are on my desk top, and root c doesn't seem to contain doc and settings.
For the past few weeks, I'm getting all these error codes and have NO clue why? They are to sites I use every day. One moment I can access the sights and next moment I get the error codes.I've run the Windows Repair Disk, CClean, Malwarebytes and Spybot and nothing I've done has helped. Any ideas will be appreciated because I've gotten a rotten headache again today trying to figure this out.If I recall, I think it all started when the Babylon Toolbar forced it's way onto my computer. I have no idea how I got it but I believe it's been deleted....and not even sure if that is the start of the problems/ I just remember having to delete it and then got these others problems afterwards. Whether there is a connection or not, I don't know.
Quick question, haven't paid attention before to know.I know Win 7 home and up OEM packaged disks have a certificate of authenticity proof of license sticker, and 32 bit isn't displayed anywhere on the sticker, but on a 64 bit sticker on the same packaging, does it say 64 bit?
I am trying to add SMS functionality to Outlook to make a notfication system (e-mail and SMS.) I got an idea from this page Setup instructions for sending SMS from Microsoft Outlook 2007 It seems great.Outlook Mobile Services makes it possible to create and send SMS messages in Outlook. can use OMS only over HTTPS (encrypted) channel. I can create a self-signed certificate with the use of makecert program.To create a self-signed certificate Ineed mkcert script. Is it correct if I type one of the following commands into Command Prompt?
i have a windows 7 Enterprise installed on a laptop..the issue with windows 7 is that i the list of "Cryptographic Service provider" in the drop down is not available..the drop down is for "Cryptographic Service provider" empty...what settings need to be done for that..
I have a HP mini, microsoft 2005 pretty sure its a Windows 7.Basically I pulled the battery out by accident at a bad time. I had left the laptop on all night. It has always been slow but when I opened it it was very very slow. I saw a sign from AVG, with a window box saying AVGDIUX.. an error message. I made a mistake and pulled out the battery.Now when I switch it on it only goes to a start up repair screen. It runs a check for problems, tells me it cannot fix it automatically and then offers to shut down the computer. Scan results are:
Number of repair attempts: 5 Session details System Disk = DeviceHarddisk0 Windows directory = D:Windows AutoChk Run = 0 Number of root causes = 1
[code]....
I switched it off and pressed F8 repeatedly at start up. I can get to the F8 screen with the different options. I tried to go to safe mode/safe mode with command prompts but automatically goes to the start up repair screen and then goes through the same process i.e. saying it is doing a check and then that it can`t fix it etc.
My Windows 7 freezes, ~once per day. Suddenly, with no slowdown issues prior to freeze or anything in particular. My installed programs list is short, and contains nothign suspicious. Updated Ad-Aware and AVG complain about nothing. The HW itself is fine, since a previous installation of Windows XP worked perfect.Didn't find anything particular in the Windows Event log, but I am not sure I know where to search
my netgear wireless modem and wireless network were renamed and all the passwords reset. Hard reset to recover. I am still getting browsers redirected daily. All three browsers each will give message that setting have been changed when opened. IE will say search setting have been corrupted and mandate Bing. Internet Options will be reset to custom levels without a reboot. I have installed AVG 2012 paid. No scan from various scanners will show an infected file except some cookies. AVG rescue disk scan found 13 password protected files that were renamed. Broke AVG and required a reinstall. Password protected files were back by the end of the day. AVG says there should be NO password protected files in their sub-directories during a rescue scan. Their solution is a wipe and reinstall.What is the safest process of doing the HD wipe and reinstall? Just plugging the thumb drive in got me all this grief. Is reinstalling files from the DVD the same process? If i try to access my old files am i opening myself to reinfection?
After installing Nvidia drivers, Realtek drivers, and JMicron E-sata drivers, I now have .log text files on the root of my "C" drive. Are these accessed next time I update the driver or can I get rid of them? I can't seem to find anything about these. I know they are there for a reason but I like things to be tidy.
My C: drive has two (non-system and non-hidden) folders which I do not think should be there - these are 'boot' and 'clean'. I do not think 'boot' should be there as I already have a system folder named 'Boot' which is identical to the 'boot' folder. However, I cannot remove it as the computer will not let me. I tried to delete 'clean', however I am unable to - it says that the item is no longer located in C:. When I open the 'clean' folder it contains a subfolder 'log' which contains one folder, which, when I try to open it, claims that 'C:cleanlog2011-08-12_18:29boot-repair07 refers to a location that is unavailable'. So my question is can I delete these folders?