Touch Screen Monitors For Win7?
Mar 16, 2009
You know, I've been well impressed over this last week of running Windows 7 that I've treated myself to a new large computer desk, a new case (Antec Skeleton) and a nice set of Creative speakers. Now it suddenly occured to me that Microsoft was bragging recently about the touchscreen abilities of Windows 7, and now I'm thinking "where can I get a touchscreen Monitor from, here in the UK?". Hey, I'm a geek!!
Looked on feebay, but they are limited as to what's on offer.
Any suggestions?
View 6 Replies
ADVERTISEMENT
Aug 27, 2009
I understand with the correct specs, drivers, vid card (and monitor?) that Windows 7 PCs can have touch screen capability.
The HP TouchSmart IQ545a already has that, with Vista.
If I am in the markert for a new PC, and WANT at least the ability to have a Windows 7 Upgrade voucher for future use AND want touchscreen capability, what do I specifically look for spec-wise?
In other words, are there any presently available PCS apart from the HP, that CAN have the touchscreen capabilty when on Windows 7. And is the HP TouchSmart IQ545a upgradable to Windows 7, anyone know, that would then retain touchscreen capability post-upgrade?
View 6 Replies
View Related
Aug 17, 2009
I've heard that the desktop computer & the lap top computers will have a setting on the computer so you can touch what your doing. Well I do have to ponder a question to you guys that are testing Windows Seven out be for the release date comes.
My question's:Will the screen break if you use the touch screen on a lap top? Do I need to get a specially monitor for the touch screen that will be add to Windows Seven? If I do need a specially touch screen, will Windows Seven come up with one that does expect Windows Seven software. An if I wanted to get a touch screen how wood I know if it is a touch screen other then a regular monitor, wood it say it is a touch screen ect.
View 5 Replies
View Related
Oct 4, 2009
I notice that 7 will have touch screen capability, I'd appreciate any information on setting up, or general data on such. What I've seen so far is all a little vague.
View 9 Replies
View Related
Jan 15, 2013
I have a IMO 10" touch screen and I want to see if I can convert it to a wireless screen. It currently is a one wire USB power it all
View 9 Replies
View Related
May 21, 2009
I thought I would give windows 7 a go about a week ago on my Home system and loved it so much I've decided to install on my "carpc" that's fitted in my Toyota Hilux
The install seemed to go well just like it did on my Home system, with even the touch screen being found, only problem I could not get it to Calibrate very precise.
One thing I noticed right away was Windows 7 seems to have a built in Touch Screen interface that only shows the options to when it knows a Touch screen is present, for example you can scroll about in word docs, or internet explorer just by placing your finger anywhere on the screen rather than the little bar on the right you normally have to use which can be hard on a 7" touch screen.
There is a better on screen keyboard that pops out when needed if using the touch screen, also the cursor changes to a small dot rather than a mouse cursor, but changes back as soon as you move the mouse. I'm sure there are other features I not had chance to find yet.
My only problem now is due to me not being able to calibrate the screen as good as normal I decided to install the Software/drivers from the screen manufacture, I used the Vista version which worked well, and now the screen is calibrated perfectly.
The problem is now windows 7 has taken away all the touch screen options in the control panel, plus all the above features I said no longer happen
Any idea how I can get them back while still maintaining my manufactures driver/software?
View 5 Replies
View Related
Aug 25, 2012
Just bought the Samsung All in One PC and the Touch Screen stopped working:[URL]This is new territory for me although I know my way around Windows.how to get the Touch Screen back on?
View 11 Replies
View Related
Aug 18, 2012
I am considering XPS 17 laptop but it has touch screen. Are there any problems using mouse as a replacement. I do not hanker touch screen.
View 2 Replies
View Related
Jun 23, 2011
so ive had a acer t230h touch screen monitor for some time, it works well and i use the touch screen and virtual keyboard when web browsing , ive been using the win 7 pro drivers, and it works well most of the time, but after going to Internet my touch screen driver seems to stop working, to get it working again i have to pull the touch screen usb cord and reinsert it driving me mental
View 3 Replies
View Related
Nov 3, 2009
I need to allow non administrators to calibrate the touch screen. As you can see, the calibrate button causes the UAC login to appear. Does anyone know a way around this?
View 3 Replies
View Related
Jun 21, 2011
i have setup a touch screen on a windows 7 but the mouse is off i touch left it go's to the right
View 1 Replies
View Related
Jan 6, 2013
I got installed A-touch (Taiwan) touch screen kit on a monitor. Unfortunately the CD that came with the kit has only XP drivers and Win7 drivers is missing. Also the A-touch website has not posted win7 drivers.
View 1 Replies
View Related
Apr 6, 2009
I'm using the Lenovo multi touch driver for my X61T. With Windows 7 build 7000 the same driver when I wake my laptop from sleep the touch screen works. Starting with build 704x (i can't remember the exact build but it was the first leaked x64 build) when I wake the machine from sleep the touch screen doesn't work (both pen and finger touch)
I have tried to change USB settings but I haven't seen any fix. A restart of the machine means the tablet works again. Any ideas about a patch until Lenovo makes new drivers for Windows 7?
View 4 Replies
View Related
Feb 28, 2010
A member of my family has windows 7 home premium, and would like to get a touch screen monitor for their pc, so their son can use the pc by touching the screen, as he does at his school. They have seen one, and I was wondering if they can just buy the monitor and plug it in, or do they need to buy anything extra? Is it easy to configure the desktop to use touchscreen?
View 1 Replies
View Related
Apr 18, 2012
I have an ergo AS2 all-in-one PC with built in Touchscreen Display on WIndows 7. All drivers are installed, and the touch screen is working, however the Mouse Pointer on screen is bugging the hell out of me.I have USB mouse plugged in as well, and when using the USB mouse, i get the default white arrow, but as soon as I use finger on the Touchscreen the Mouse pointer changes to a small diamond. When I take my finger of the screen, the mouse pointer dissappears alltogether (until the next time i touch or move the mouse)I want the touchscreen Mouse pointer to stay the same as the normal white arrow. I have tried all the options under Mouse settings and Pen and Touch, but none work.
View 3 Replies
View Related
Nov 7, 2009
i use photos as my screen saver but because im using 2 monitors when the screen saver starts it puts the pics in the middle of both monitors, is there a way of having one of the monitors go into sleep and the screen saver displayed on just one monitor? im sure ive seen the setting somewhere.
View 2 Replies
View Related
Nov 20, 2011
I use 3 monitors and I was getting mad everyday about windows 7 log-on screen being in the middle a bit strecthed on the left and right one, enough. Is there any viable way to make it stretch? like my desktop picture, on all 3.
View 11 Replies
View Related
Jun 30, 2011
issue with the logon screen in Windows 7 and how if you have dual monitors, the other monitor is always black?
View 2 Replies
View Related
Jan 1, 2010
I have 2 samsung22 monitors hooked up to a 8800gtx running on windows7 64bit. The problem I've had ever since going to windows7 is 1 monitor works, the other just black screen with power on. I've gone into nvidia control panel and also through windows and it shows both monitors present but I noticed one monitor is attached through an analog cable but both are hooked up with the dvi cables. Could my card have a bad port?
when I plug in monitor 2 in the r/s dvi port it shows the right side desktop portion of the extended view and when I switch to monitor 1 on the right side dvi port it shows the left side desktop view but nothing comes up when attached to the left side dvi port. I've taken a snap shot of my desktop and it shows both screens. I've tried older drivers as far back to 170's and nothing worked.
View 2 Replies
View Related
Jan 5, 2010
1. Is there a way i can make a single wallpaper be stretched across both monitors (not just the image twice)
2. Is there a way to stretch the taskbar across both displays?
View 9 Replies
View Related
Nov 29, 2009
I upgraded to windows 7 from xp and after i did that my display is not taken up the whole screen can anyone help me out.
View 6 Replies
View Related
Jan 16, 2009
Ok. I have Windows 7 x64 on my computer, and I have seen that with Windows 7 there is a new loading screen. All that I ever get is the same boring green bar like in Vista. Did I do something wrong, or is there an option to change it?
View 4 Replies
View Related
Sep 13, 2009
i instaled the rc1 2 weeks ago anfd everyting sems to be fine until today. i had 2 blue screen.
Problem signature:
Problem Event Name:BlueScreen
OS Version:6.1.7100.2.0.0.256.1
Locale ID:1048
Additional information about the problem:
BCCode:d1
BCP1:0000000000000000
BCP2:0000000000000002
BCP3:0000000000000008
BCP4:0000000000000000
OS Version:6_1_7100
Service Pack:0_0
Product:256_1
Files that help describe the problem: C:WindowsMinidump
View 6 Replies
View Related
Sep 24, 2009
I've been using Windows 7 for about 2 weeks and I didn't have much issues with it. Today when I turned on my laptop, everything was booting fine until the welcome screen where I enter my password to log in. It gives me a blank page but it's not loading at all, I see my mouse not to mention. It's working fine when I boot up from safe mode though, that's how I'm typing this :P.Anyways, I really need someone to help fix this.
View 2 Replies
View Related
Jan 7, 2010
My comp:Windows 7 (x32), MSI (865GNeo2), GeForce 6200.
After Windows 7 installation get in random time way, black screen for 1 to 2 seconds in very "soft" way.
In Even Viewer, Custom Views, Administrative Events have only one type of Warning:"Name resolution for the name wpad.phub.net.cable.rogers.com timed out after none of the configured DNS serves responded".
UsedWin7 DVD to "repair and upgrade". No solution.
Delete and install again NVIDIA. No solution.
Windows and drivers are update.
Will appreciate very much for suggestion.
View 7 Replies
View Related
Dec 9, 2009
M/c starts with a nice blue screen with left and right icons and mouse cursor all operatig .It will go no further.
when this first occured it went into Repair mode twice - said it could not fix and pointed to System32 DriversWDF01000.sys.Subsequent use of Repair now shows no errors.
Booting to Repair from my installation Disk reports eveything as OK.Moved to Restore point - section shows only one point of todays date -which apparantly was made before an automatic update - ran OK.
I have run SFCscannow but cannot interpret it. - sent to rapiddatashare -lost the ref No. for the moment.
View 5 Replies
View Related
Jun 30, 2009
I installed Win 7 sometime around Feb, a dual boot with Win XP. But when I upgraded Win XP to Vista, the option for Win 7 disappeared on the boot screen, and the system would boot straight into Vista. So, I used the Startup repair option from the Win 7, and after rebooting it showed the boot screen with W 7, and Vista. But, after I "repaired" it, Win 7 seems to have lost the Win 7 startup screen. It now shows the "Starting Windows" from Windows Vista, then the Win 7 "welcome" screen.
I realize it's not much of a problem, but is there any way I could get the Win 7 startup screen back?
View 1 Replies
View Related
Oct 3, 2009
I had to return to xp mce till I get my W7 ultimate signature edition in a few days and am wondering what is that program for changing your boot screen ?
I knwo it was a freeware and it was compatible with vista xp and w7 so I am gonna use it on my xp systems and once i return to w7 on my main system ..
Sorry havent made any posts in a while I got burried in school and starting my own lan center / custyom build computer shop so I havent had time to do my normal posting and catching up..
IU am however back I got my collage scedual and work scedual to allow me 2 horus of messing around in between plus time for pro gamming WOOT MLGPRO FTW!!!!!
View 2 Replies
View Related
Aug 18, 2009
I cannot find any high quality Screen Recording software that will work on Win 7.
Camtasia Studio 6 installs fine and I have tried ALL compatibilty settings, still NO GO.
ADOBE Captivate 4 will not work either.
I have tried several others, all with the same results.
Outside of me posting 100 different error messages does anyone have a clue where I should start with this problem?
I have been a beta tester for MS since 1992 and this issue has confounded me more than anything I have encountered.
BTW I run an AMD Phenom-X4, 4GB RAM, Nvidia 9800 GT, 4GB ReadyBoost and have DivX and all other CODECS freshly updated.
View 3 Replies
View Related
Jun 30, 2009
Some might remember I posted a few days ago about installing Windows 7 (64bit) separately on this same comp (different hard drive) to test what drivers worked for the devices I had, in particular the Canon scanner.
Anyway it worked, and I booted into Windows 7 64b fine - but I had a few issues getting back into 32-bit one (64bit one became the active boot. even after i used diskpart and bcdedit etc.
Anyway, I got the 32-bit install to again load as the default (and deleted the 64-bit partition). BUT, I keep getting the Vista booting screen - i.e. the small green loading bar instead of the elaborate "Starting Windows'. I then put in the Windows 7 dvd in and went to repair the install (to try & get the Windows 7 boot screen back), but it wouldnt even find the OS install to repair it.
So basically, its back to the 32bit Windows 7 install fine - but with the older Vista loading screen. Any ideas?
View 6 Replies
View Related
Nov 21, 2009
im running win 7 x86 in a vaio vgn nr 21s/s with a 8400mgt and i cant find a driver which displays my correct resolution in my external wide screen (22'' at 1680/1050)
all i cant get is 1600/1200 or above but not he optimal.
View 5 Replies
View Related
