I am currently using a laptop connected to my tv. The tv monitor is my primary display and the laptop screen is my secondary, they are extended to each other.I am planning to add a third monitor and was thinking of making it touch screen. Would this work? Everything I have read says that if you use a touch screen it has to be the primary display.
View 3 Replies
Haven't been able to get a good answer to this question.
I plan on running my standard dual monitor setup + a small touchscreen for a total of 3.
The touchscreen will be used as a lunchpad of sorts, holding icons for my most used programs files, touch, launch, back to old school monitors.
It occurred to me that since the visible pointer would be on another screen, Windows might have to pull the pointer to the touchscreen to click, or might not know to pull it at all.
I foresee problems trying to run a touchscreen alongside a standard monitor. Anyone have experiance with this?
EDIT: Let me ask this a different way, question is a bit foggy...
When running a touch screen next to a regular LCD, can I "click" an icon (via touch) without affecting the pointer on my other screen?
I have just did a clean install of Windows 7 ultimate from XP and I am unable to get my dual monitors to work like they did in XP.
I have a DVI Radeon graphics card plugged into the agp slot, and a Nvidia geforce vga adapter plugged into a pci slot of my dell optiplex 755. When I am in the screen resolution settings the second monitor cannot be detected.
In bios I have 2 options under primary video adapter and they are auto, and onboard card. When set to auto the Nvidia card gets a signal but the Radeon does not. There are no conflicts in the device manager, and all of the drivers are up to date.
When I change the bios option to onboard card the Radeon adapter gets a signal but the other monitor cannot be detected and in device manager there is a yellow exclamation mark next to Standard VGA adapter and a code 10 error that states the device could not be started.
I have powered down, and unplugged every cable, I also tried to use the integrated VGA adapter to the Intel G31/G33/Q33/Q35 Graphics Controller but the computer will not even boot. I get
"System Halted
Attention Unsupported Video Configuration Detected"
I have two monitors, both work fine as standalone but Windows will not detect either as a secondary.
Please help me someone, I am so used to having my helpdesk email open in one monitor and all of my other work in the other monitor.
I recently had an older HP Pavilion Media Center m7760n Desktop PC rebuilt. The old power supply fried the motherboard so I need to get a new power supply and motherboard. Here are my current specs.
Mainboard : Asus P5QPL-VM EPU
Chipset : Intel G41
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 2048 MB (2 x 1024 DDR2-SDRAM )
Video Card : Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1)
Hard Disk : WDC (1000 GB)
[code]....
As you can see from above, the "video card" is actually integrated into the motherboard.The computer works perfectly except for one major problem. I have 2 monitors, one is 22" with 1680 x 1050 resolution and the other is a 15" monitor with 1024 x 768 resolution. At the back of my computer I have a VGA port and a DVI port. The 15" is connected to the VGA port and the 22" is connected to the DVI port.When first starting the computer, the 15" monitor was recognized as the primary monitor while the 22" was recognized as the secondary monitor. No problem. I simply went to the display settings and set the 22" to be the primary monitor and the 15" to be the secondary monitor. Unfortunately, this setting seems to reset as soon as I reboot the computer. The 15" is always set as the primary monitor on start up, forcing me to set the proper settings all over again. What's worse is that even after I have set the proper settings, they sometimes revert back when using Media Center or other programs. Worse yet, sometimes the monitors both go completely black ... as if the monitor settings were about to switch but got locked up some how.I'm assuming that perhaps the on board video has a primary port (VGA) and a secondary port (DVI) but even still, shouldn't Windows 7 be able to over-ride this and save these settings so that the monitor settings remain the same during startup and regular usage?
I have an hp dv5215us that I have been running off a power cable with no battery for quite some time now, hooked up to a secondary display, a Dell E151FPp. Every now and then I will unhook the secondary display and take the laptop with me to work without issues. Last night I popped my Win 7 install disk while running XP to install, clicked what I needed to, and let the install disk run. Now that Win 7 is installed, I am running into the following two issues:
1) When the secondary monitor is unplugged, the computer will not power on, let alone boot. No blue lights, nothing.
2) When the computer is on and I unplug the secondary display (I learned the hard way), the laptop powers off instantly, as if I unplugged it from the power source.
I looked in device manager under monitors and it only shows one. I am getting mirror screens now, and under the display options, the resolution options available to me look like those for the secondary monitor, not for the laptop monitor. I installed Windows 7 with the secondary plugged in.
I bought a new battery for the laptop online last night. I know it sounds like a hardware issue rather than an OS issue, but the laptop and secondary display didn't move anywhere since it was running without issues in XP, so unless there was some kind of short or something while the installation was taking place, I can't think of why this would be happening.
Any suggestions?
I have seen a couple dual monitor problems on this forum, but no solutions for my issue. I have Windows 7 32 with dual 4850 cards and CCC installed with Crossfire configured. I am using 2 20" LCD monitors, my primary works fine. Windows detects my second 20" monitor and I have set the resolution and that it should extend my desktop but there is no display.
When windows is loading both monitors display the Windows 7 splash page so I know the signal is getting there. Also I have tried resetting the drivers, uninstalling them, etc. At no point have I been able to get windows to display on both monitors. Any ideas?
Is there any way in Windows 7 to force a specific full-screen program (like a game) to open on a secondary monitor? Or does full-screen stuff only work on the primary monitor?
View 9 Replies View RelatedHow to Run the Windows Photo Viewer Slide Show on a Secondary Monitor ?
View 0 Replies View RelatedI have an HP AIO touchscreen computer that comes preloaded with win7 pro and works fine. It also has a vga in, so i can plug it in as a secondary monitor on my other computer, but touchscreen doesnt work when i do. I called HP and asked for the touchscreen driver (some touchscreens have special drivers), but they had no clue of anything like that. I thought WiN7 was supposed to come preloaded with it, but if i look for "tablet" settings in my computer, its just not there, even though i see it on my AIO. I dont get it, where is the driver for touch? And will touchscreen still work plugged in as a VGA?
View 4 Replies View RelatedI am having an issue with setting up a POS system and specifically the touch screen.
I have tried to update the windows drivers, and the TekVision drivers to no avail.
here are the TekVision Drivers: [URL] Is there away to modify the Windows 2000/XP drivers for Win7?
I plan on running multiple monitors with one being a touchscreen.
First off, is this even possible? The thought crossed my mind that if there was a visible cursor, the touchscreen might not "grab" it properly. I need to be able to use the touchscreen as a lauch pad of sorts, with my most common files shorcuts on it, touch, open, back to the old school monitor.
Or does having a touchscreen require ALL monitors to be touchscreen (it might delete the visible cursor.)
Second, can I still use my touchscreen monitor with the cursor (as if it was just a standard monitor?)
Lastly, can I run a touchscreen on an old (4-8mb) video card? I can't imagine needing more than 800x600 16 bit. This will be a smaller monitor and really just used for a launch pad.
Anyway, thanks for the (future) help and I look forward to stopping by (once ASUS decides its time to mail the box!)
I have been going through the SSD optimization guides in the forums and had a question when disabling services like Superfetch, and Prefetch. Will this affect the performance of my secondary HDD? I am using me SSD for Windows 7 and programs and using my HDD's for storage.
View 6 Replies View RelatedMy first hdd is the ssd and i dont want stuff installed on that i just wanted the os on it and now everything i install goes straight to the ssd anyway i can move it to my secondary 1tb hdd
View 1 Replies View RelatedSo basically, a couple days ago, I installed a new ASUS Mobo, Intel CPU and Vengence RAM. But when I tried to boot into Windows 7, it would act like it was loading just fine, and then get a BSOD so quick that I couldn't read it, and fail to boot (I do not have an OEM copy of Windows). With not many options, I decided to reinstall Windows to fix my problem. And in that install screen, it listed all of my HDDs, without letters. I was like "uh-oh, which one is it?" So, I pick one, and it's the wrong one. But, instead of removing Windows from what was my D drive and now is my C drive, I'd like to just remove Windows 7 (the still corrupted one) from my now D drive. Is that making any sense? lol So anyway, I know that you can't just "uninstall windows", and I've read about just deleting the file folders... but that I have to give myself permissions to do it. Of course, I can't seem to do that. I have several to choose from, including "trustedinstaller" "creatorowner" "System" "Administrators" nothing seems to work. They even have full access and permission, and when I try to delete the Windows folder, it says "you must have permission to continue" I click okay, it continues, and then says it can't delete the folder. When I try to give permission to one of those names, it denies access for the Windows folder.Oh, also, formatting is really out of the question, as this D drive has all my precious files on it that I can't lose. But, I do have enough space to maybe partition it, copy it all over, and then format the windows partition?
View 4 Replies View RelatedI just instaled a ssd and im usen that to boot from and have another drive as slave what do i need to do to play games from that drive? Also can i install games to the secondary the slave and play from that to save space on my ssd?
View 8 Replies View RelatedI am not sure if this is a Windows 7 "issue" but I assume it is because I never noticed it in XP.
I have 4 drives in my PC. 1 for the OS, 1 backup, 1 data and 1 backup for the data drive.
What I have noticed the recently is that while the PC is running I can hear a drive power down and slowly stop spinning. If I trry to access the files on that drive it powers back up and I get to the files just fine.
While it is not a big issue I don't like having my drives start and stop all the time just because of the wear on the motor.
Is this a setting I am not aware of or anything I can do to change this?
I just placed an old hard drive into my computer to use as a slave. After I booted up on my current hard drive I went into disk manager and tried to format all the partitions. I formated one easily but the other won't seem to format. The option to format or delete volume are both greyed out.I then tried to boot from my Windows 7 disk to format the drive that way but it said it could not format dymanic drives. I can't change the drive to basic without deleting the last simple volume.
View 3 Replies View RelatedI am unable to use the Windows 7 image backup program because it doesn't see my second internal hard drive. I can see the drive in disk management. ( it shows up as SDATA1 D drive) and has plenty of room left 400 gigs out of 700 gigs.
View 1 Replies View RelatedSo a couple months ago, I noticed that my secondary HD would randomly disappear. Going into Disk Management and performing a "Rescan Disks" would get it to see it again, but would randomly go away again. I figured the disk was going bad, plus I wanted more storage for recording. So I bought a new drive, worked great for about a month. Now it does the same thing. Only now, doing a "Redcan Disks " isn't working.
Edit: Resolved by swapping power cables with one of my DVD drives, now the DVD drive doesn't work. Off to Fry's for new PSU.
I'm wanting to format my second hard drive but windows 7 does not see it.It does show up in the BIOS.
View 8 Replies View RelatedI recently installed a second HD. Everything worked fine until I tried to restart it this morning. I unplugged the second HD and started up my PC and the same thing... "Loading Operating System ..., Boot from CD/DVD :, DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"I went into BIOS and changed the boot priority to HD and changed the order. Same thing. Luckily, almost everything I wanted to save I had transferred to my secondary HD. So if I have to do anything drastic I'm not too worried about it. But I'm still gonna lose some stuff.
Update: I have a legit copy of Windows 7 Pro installed and it was all working fine last night. This problem just arose this morning. Luckily I found a System Recovery disk I made a while back and I'm trying that now. But if anyone has heard of this before and there's a simple/obvious solution I'd be very happy if you could help me out.
I used DiskPart to partition and format the second HD. The second disk had a previous Windows System installed on it from my previous PC, XP I believe. I'm hoping my primary HD didn't get formatted somehow. When I loaded the system recovery disc no current OS was listed that I could choose from to repair/restore. I tried to re-image my system but Windows says it cannot find a system image.
2nd update: So I used the system recovery disc to automatically repair startup (Can't remember exactly what it said). But now it booted up correctly.
3rd update: So after I ran the startup repair on the system recovery disc I restarted my PC with the second HD unplugged. Booted up just fine. So I shutdown, reconnected my second drive, and then started up. Went into BIOS, made my primary drive the first HD to boot from, and then it started up just fine. I'm wondering if somehow the MBR or something else possibly got changed during this whole ordeal.
Instead of installing programs on the main OS Drive and installing on a secondary drive or partition, I should still be able to run the programs if I decide to format the OS drive and reinstall Windows. If so, the problem I'm seeing is that Windows won't know those programs are installed (like using the search bar to find programs or the program list) since whatever registry entries the program installer made will be wiped. Is there an easy way to back it up?Or is it advisable to just reinstall everything when I reformat?
View 1 Replies View RelatedI recently baught a Clevo Metabox P170EM laptop (the Australian version, i think the US version is by Sager), and it has a 128gb SSD Crucial M4 and a secondary 750gb HDD. I am not actually sure what kind of harddrive it is, all I know is that it is 750gb 7200rpm.I baught the laptop without an OS, as I had a Windows 7 disk already, and I had to go into drive management to format the secondary HDD. That all worked fine, I got it up and running, and was copying data across for a day. I also installed a couple of games (Crysis 1 &2, Dragon Age Origins if it matters) and played them from the secondary drive without a hassle.While playing, I got 122 Windows Updates which required a restart. So I let them install while I worked on clearing up my old laptop.Next time I booted the new one up, all of the icons for the previous games were blank and the HDD was unavailable. It doesn't show up in My Computer or Disk Management or even the BIOS (is that normal?)It also seemingly uninstalled some of my drivers - my nvidia GTX 670M wasn't recognised til I reinstalled the driver from the CD. I tried reinstalling every driver but no luck for the HDD.
View 1 Replies View RelatedWhen I turn ON (cool boot) I get a message that says "SATA secondary drive 0 not found" press F1 to continue or F2 to set the BIOS. Either way I choose the drive always show up in the Device Manager and works fine, except that I always get the same message when turn ON the computer. It never does it during re-start.
View 9 Replies View RelatedI have a windows 7 Pro OS running which was loaded with one HDD attached. Windows was running fine. I installed a secondary HDD to allow some backup; it was able to be installed, fully formated and was healthy. I tried to backup but was told by windows it was not large enough so I uninstalled by accessing device manager from inside computer management and clicking uninstall and confirming device removal. There was then, no visible indication that the secondary drive was installed. I shut down and physically removed the secondary drive and tried to reboot but all I could get was "A disk read error occurred. Press Ctrl+Alt+Del to restart". So I reconnected the drive and it boots fine. My question is, what do I need to do to be able to disconnect the secondary drive without getting that error?
View 4 Replies View RelatedSecondary Sata Drive Not Recognised
View 2 Replies View RelatedI am an IT professional however cannot figure out this issue on my my machine and its driving me nuts
I have Win 7 64 Ultimate on RC build 7100 and everything runs fine, however since next week the OS will expire and my machine will reset every 2 hours therefore i upgraded to the official Win 7 64 Ultimate and the blooming machine gives me a BSOD every time I try and install something on my secondary drives (d: e: f: )
Thought it was an AVG issues or access privileges since my other drives where formatted on other previous OS`s (c: for windows, d: for games, etc.) However it now even seems to be doing it if I try and install stuff on C: - now I have a hunch it might be AVG FREE causing the issues, dunno, any suggestions would be appreciated.
I just did a clean install and created 2 partitions.... C and D. I meant D to be the Windows partition and C be my main. Well I messed up I guess lol. I made 2 partitions C being 30gb(supposed to be 450gb) and D being the 450gb(supposed to be 30gb). How do I switch partitions? Make C become D and vice versa?
Also, how do I make everything I download and install in the future use
I just got new SSD to replace a secondary regular HD that died. When i plug in the 2 sata cables that the previous HD drive was using and boot up the computer, the new ssd hows up as the main drive and the primary one is not shown in the BIOS so i cant load windows.
When i unplug the cables the computer works as normal again.
The sata power connectors are all links together (i think its some kind of 4 head power connector, its a prebuilt) if that makes any difference.
When i connect a sata hard disk which is loaded with windows 7 as a secondary to another windows 7 system to take the data backup it is not showing the drives but i can see it in the device management in windows 7.
View 14 Replies View RelatedI am having issues with my computer and am planning on reformatting. I have a terabite hard drive which I moved everything to and a half terrabite hard drive which has Windows 7 and all that on it. If I reformat will it remove everything from all the hard drives or just the one I choose to install Windows 7 on?
View 2 Replies View Related
