The clock in the bottom right-hand corner was always incorrect. He could change the time, but once he shut the laptop down and turned it back on, the time was incorrect again. I did some research online and tried many things to fix the issue, none of them were successful. So, he has just been putting up with the clock always being wrong. Then the other day when he turned it on, it wouldn't even boot Windows, and just says "time of day clock stopped".
It makes several months am using Windows 7 Professional on my Dell Studio XPS 1640 (it's a 64bit system). It was working fine and I was happy with it. It makes some weeks now that after each time I shut down, when I turn on again, it boots up to where the 4 coloured logo appears and then am left with a dark screen with only the cursor. I once waited for nearly 1 hour, nothing changed. The users screen never appeared.
I had to turn off manually, and when I turn it on again, it tell me that windows failed to restart.... and am left with these 2 options: >start Windows Normally(I went back to square 1 when I tried this) >Startup Repair.
The automatic system repair did not find any problem, I had to use the system recovery for which I had to choose a previous date in time to which I want the computer to reboot. Some times it works, sometimes I have to do it again and change the date.
When I hibernate the laptop, there is no problem when I turn it on again. But when I shut down or restart the laptop, it boots up to the "starting windows" screen with the windows logo and I have to turn it off manually.
It is causing me a lot of problem, I cannot install any program, each time I have to reinstall my printer.
I have a rig I use occasionally, as HTPC and occasional mule work, file service, etc.I would like to not have it simply sleep when I have left it running and not returned, but rather have it shutdown properly.Is there a way to do this within Windows 7 controls, or is there an aftermarket, shareware, or scripting way to do so?
Gateway DX4850 i5 2300 CPU 2.8 GHZ 6GB RAM 64 bit operating system Windows 7 Home Premium Service Pack 1
This problem started about 2 months ago. Windows takes a long time to shut down, at least 5 minutes. Sometimes it doesn't shut down and reboots.Every shuts down normally, then the grey screen "SHUTTING DOWN" just seems to hang.On one recommendation I updated the BIOS, that didn't seem to work.I scanned in safe mode with Malware Bytes Anti Malware and the computer is clean. I use AVAST antivirus.
I have Windows 7 ultimate installed. I used the Task scheduler one time to do a Shutdown of it set at 10pm it worked fine one night now when i set it for a different day it does not work anymore. i have the right trigger, time and date etc set correctly WTH.
At the moment I'm not really using an external HD for any purpose, but still have it plugged in, with the software set to put it into sleep mode after 3 minutes if it's not being used. It's actually noisier than my PC so it's something I would rather not have humming away if possible. I have noticed that when I shut down when the HD is not in sleep mode, it shuts down pretty much instantaneously. With the HD in sleep mode, we're talking about a minute. What could be the cause of this? The PC is trying to shut down, and can't see the HD because it's having a nap? Would be nice to know.
I'm currently pissed off about tmy unit which is taking too long to shutdown. I've tried the methods posted here to lessen the startup time and shut-down time of a computer but it only affected the booting process. when I shutdown it still takes that long even with the tweaks.
I've had this problem for a while and it drives me nuts. Every time I shut down my computer it will crash the next time I power up and try to boot windows 7. I can go in and out of sleep or hibernate without issue but if I ever shut down my system it will BSOD during the next power on. After this initial BSOD there are usually a series of BSOD (usually they report different error codes) in subsequent restarts. Eventually the system does seem to stabilize and stop crashing. Once things are working it will run for literally months without another BSOD.
I am making a shortcut for shutdown. So I am using command shutdown -h for hibernate shutdown -l for logoff
But whenever I use time for it, like: shutdown -h -t 120 Where t 120 is number of secs after which the command will execute then the command doesn't executes. This command works fine for restart shutdown -s -t 120. I can use hibernate with time.
My windows7 PC get more-than 3 minutes for Shutdown. When i click "Shutdown" button it show more-than 3 minutes "Shutting down.." screen So that i change it registry following value to 1200 HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControl As mention in Here but i can't still solve the matter.
I have a ASUS Laptop with Intel I3 processer and Windows 7 Home Premium. I recently had a forced shutdown during a Windows upgrade session. Ever since then the Boot and Shutdown times have increased to over 15 minutes. I have run the msconfig unticking all but the antivirus (Kaspersky) and it still takes >15 min to boot and Shutdown. Is there something I can do before I decide to reinstall Windows &. (I dont have a install disk.) The software came with the Computer and I have the OEM code (Bought at Best Buy)
I have two windows updates that keep failing. When i go to shutdown my computer I always have an update icon attached to the shutdown key. The download is always 1of1. Then when i reboot, the update icon is still there. I'm thinking since the two updates are failing, it has something to do with the 1of1 update not downloading properly. I went to windows update to check for new updates, and the only one is the two that keep failing. My computer just blue screened on shutdown today, winch got me thinking i really need to fix this.
Im not sure if this is in the right category, but I think it could be Windows 7 related.My Powersupply died the other day so I purchased a new one and all was fine, except when I shutdown it either freezes or carries on for what seems like forever.The only thing is that on bootup my DVD Drive and SSD have changed ports so my dvd drive is now device00 and my SSD001.
About a month after I started using it, the Say the Time clock program I bought stopped launching the management menu when I right click the date/time field in the task tray (notification area).
Therefore, I can't use or edit the program. Neither the touchpad nor the cordless mouse works.
Other than this problem, my computer works great. Every single item that's meant to be right clicked works for me.
Is there a way I can generate a log to show the software manufacturer (Provenio) that it's their problem and not mine? I am a novice user but I can follow instructions. However, I don't want to put my computer at risk if I make an entry error.
I've been using computers for 18 years and I've never had this problem until I bought this software and used it for about a month.
I just wanted a conclusive way of putting the ball back in the manufacturer's court.
I spilt some water on my laptop a few days ago but fortunately it's completely dried out and working perfectly.... apart from this minor (but important) issue.
Problem: the system time does not stay correct. Even after manually updating the BIOS time and also even after manually syncing it with the various servers available under the time options.
Fix: set the internet time sync interval to every minute rather than its default setting? How do I do this?
P.S. This couldn't be a CMOS battery issue surely because even when the system is on and plugged in the system time still deviates from correct. (I assume the CMOS battery is only used when the system is powered off.) If I need it replaced, how does that sit with my Dell hardware warranty?
So I bought a new desktop computer about 2 weeks ago and ever since I got it, it's been freezing (locking) up on me at random times. I currently use Windows 7 64-bit. I put in a new graphics card and new memory sticks just the other day and I got the same freezing problem. It's very random. I can be surfing the web and the next thing you know, the whole thing freezes up. I can't move the mouse. Can't do CTRL ALT DEL. Can't do anything. Seems as if the whole computer locks up. The only way to restart the computer is by manually holding in the power button for a few seconds. So since I replaced graphics card and installed new memory, I was thinking it may be something else causing this.
I've changed the setting of maximum processor state on battery from 100% to 50% to save battery. But the setting resets to default 100% time to time. I don't know why this is happening.
Once in a while I find that the time zone moves from GMT to Pacific Time.Has anyone any idea what would cause this, new CMOS battery fitted, which ever time zone shows the time is correct for that zone. Checked the BIOS and that also changes.I dual boot two Win 7 installations.
I have an issue with my P8P67 PRO (Rev 3.1). Mouse but mainly keyboard (both Microsoft) are not detected during the cold boot from time to time, i suspect the BIOS is the one to blame i have the latest version, what can i do?Both are USB.When i turn on the PC from time to time a long beep takes place and a message during posting (no keyboard detected). Sometimes happens sometimes not. PS/2 ports didn't work for me, when im using them NOTHING gets recognized (and yes i turned off the PC before plugging them).
I loaded Windows 7 three computers, 2 desktops and 1 laptop. My Dell XPS is the one that keeps flashing a black screen from time to time. It seems like it is thinking for a few seconds but when this happens it is like my monitor turns off.
I've been having this issue for awhile now. When I try to do multiple things at once Windows seems to freeze for minutes at a time.I am running stock settings on all of my hardware so Im confused to what could be happening. [code]
I've installed snow leopard (hackintosh) on a separate partition and since then I've been having trouble with the clock it reads 3 extra hours than the original timeSo I deleted Snow Leopard and formatted the partition and checked the time again and no change at all
