"The Drivers For This Device Are Not Installed (Code 28)"?
Dec 7, 2012
I finished with a fresh install of Windows 7 Ultimate x64 in a new Sony Vaio S laptop. I installed all of the Sony Drivers and also performed Windows Update. A few drivers provided by Sony were not compatible with 7 (they are listed for Win 8), but I was able to download them from the device manufacturer. I checked Device Manager and I'm unable to install drivers for Universal Serial Bus Controller (see screenshot below).
View 3 Replies
ADVERTISEMENT
May 31, 2011
The drivers for this device are not installed. (Code 28)
View 2 Replies
View Related
Dec 3, 2010
Device drivers are not installed. A driver has not been installed for this device preventing it from working properly.The device driver for Network Controller has not been installed. This device will not be available until the correct device driver is installed.
1. Try installing the drivers using Windows Update.
2. Install the drivers that are on the installation media that came with the device.
3. Check with the manufacturer for an updated driver.
Explanation of Error Codes Generated by Device Manager.I have installed the driver for my network card, and the bluetooth driver. I'm not sure about drivers for a wireless connection, I don't know if they're included in the network card drivers or not. What's this network controller thing? And what driver would satisfy it? I'm on an Acer Aspire 5742ZG. Their driver support is pretty bad.Hardware Identification Fixed my problem. I found out using that website that the Network Controller was an Antheros Wireless Network Adapter. Antheros. When I installed my drivers and saw that I had a Broadcom LAN card, I assumed that I'd also have a Broadcom Wireless network adapter. Well nope. I deleted the Broadcom driver, installed the Antheros one and now the problem is fixed.
View 2 Replies
View Related
Jan 25, 2012
I recently upgraded my computer from XP to Windows 7 now I have no sound! In device manager there is a yellow ? mark by multimedia device and PCI input device, which I am sure is an audio card I installed trying to get sound. My system is a Gateway Desktop E - 4100, Sound Blaster Live audio card. Have all ready tried Intel, Gateway and Mircrosoft to locate the newest drivers to fix the multimedia drivers with no luck what so ever. I even payed and downloaded a program to scan and update my computer with the latest driver (DID NOT WORK) and spent hours and hours searching the web to locate the driver.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.66GHz, x86 Family 15 Model 2 Stepping 9
Processor Count: 1
RAM: 2558 Mb
[code].....
View 6 Replies
View Related
Nov 7, 2009
I recently installed Windows 7 Home Premium and I have the Base System Device error on 3 devices. I am having a problem attaching multiple USB drives simultaneously so I want to make sure that these driver problems are not contributing to the problem.
View 9 Replies
View Related
Jan 31, 2010
I have recently installed Windows 7 to my HP dv2718us and am missing drivers.For all listed below I get "The drivers for this device are not installed. (Code 28)"
Base System Device
Location: PCI bus 1, device 9, function 2
Base System Device
Location: PCI bus 1, device 9, function 3
Coprocessor
Location: PCI bus 0, device 1, function 3
Running updates for drivers have been unsuccessful. It seems important.
View 9 Replies
View Related
Nov 5, 2012
I recently installed a Kinivo BTD-400 usb bluetooth adapter so I could transfer files from my Samsung Galaxy s2 I727 phone. I downloaded the current installation files from the Broadcom site. At the end of installation, a message box lists several items "ready to use" (AV source, headset, etc) but three items saying driver not installed.I have new entries in device managerBluetooth Radios - Broadcom USB device and Microsoft enumerator Network Adapters - BT device personal area network and RFCOMM protocol Other devices - Bluetooth Peripheral Device entries with exclamation marks. I added my phone shows to Bluetooth Devices but it appears with an exclamation mark. I right click, troubleshoot, apply fix. Driver for bluetooth peripheral not installed. Try again. Same result.When I select a picture and click "share via Bluetooth" I get a message "image not sent." So my phone and computer see each other,but I can't seem to send a picture.
View 1 Replies
View Related
Nov 19, 2012
I got a new hard drive for my HP Pavilion DV6T-6000. Installed windows 7 ultimate and a bunch of drivers from HP's drivers section for my computer and I still have this unkown device. It wasn't there on my old drive so something isn't right here.
Location: on Microsoft ACPI-Compliant System
Status: The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. Hardware ID:ACPIHPQ0004
View 9 Replies
View Related
Dec 9, 2012
My webcam is not working on skype and when i go to check the image device i get this (This device cannot start. (Code 10)... message on the property.
View 2 Replies
View Related
Jan 5, 2012
how do i find driver for unknown device on my laptop?
View 3 Replies
View Related
Jul 5, 2011
I made the HDD formatted and it's in NTFS format. The disk for some reason says Bootmgr is missing. Also when I try to install Windows 7, it says error code: 0x80070017. I don't have any OS installed. I've tried the repair disk thing. Also my BIOS is PhoenixBIOS (or something, that what it says on the BIOS Setup Utility menu) and I don't know how to disable AHCI mode.
View 1 Replies
View Related
Aug 23, 2012
So i've been playing games on my pc with a usb controller and it's been bugging but know when i plug it in a usb port i get usb unknown device does anyone know how to fix that?
View 9 Replies
View Related
Oct 16, 2012
I am getting this error in device manager over and over and over, i have uninstalled the driver, and reinstalled it over and over, i keep getting the same error, my hauppauge colossus card was working perfectly then all of a sudden i get this error, i have used ccleaner to repair my registry all to no avail, I think i need to do something in the registry to fix this but have no idea exactly what. What do i do?
View 12 Replies
View Related
Jan 12, 2013
I have a Nikon Imaging scanner which my PC detects on connection. I have the correct driver which device manager installs with a code 10 error, the device cannot start.My PC is running Windows 7 64bit. I should point out that the scanner works correctly on my old PC running Windows XP, so there is no problem with the hardware. Anyone got any ideas why I might be getting the code 10 error on my new PC?
View 6 Replies
View Related
Jul 28, 2012
Windows has stopped this device because it has reported problems. (Code 43). I have been sent around in circle trying to use the Microsoft fix it 'genius'. I am trying to connect my Smartphone via usb cable to computer. Battery charges but it either does not detect it at all or comes up with the above error message.
View 7 Replies
View Related
Sep 30, 2009
I got Windows 7 ultimate 64bit from microsoft technet. Everything is working fine except for the USB ports in the back of my computer, when i go to device manager I get the error: Code 43Windows has stopped this device because it has reported problems. (Code 43), I have tried the drivers for my motherboard from the Gigabyte site, the ones for Vista 64bit, but no luck,
View 9 Replies
View Related
Jan 2, 2010
1. First in the device manager, my "Microsoft Virtual Wifi Miniport Adapter is getting and error that says "Windows has shut down this device (code 43)"
2. The speed of the internet spikes between normal speed(10k-18k bytes/s to around 40 bytes a second
3. In the event view there is a warning that says: "NtpClient was unable to set a domain peer to use as a time source because of discovery error. NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: The entry is not found. (0x800706E1)"
4. Another problem in the event viewer: "Name resolution for the name isatap.ktechsystems.ca timed out after none of the configured DNS servers responded."
5. Yet another problem, at this point my internet slows down to an unbearable speed: "This computer was not able to set up a secure session with a domain controller in domain KTECHSYSTEMS due to the following:
There are currently no logon servers available to service the logon request.
This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain."
If anyone has a suggestion on how i can fix this, it would be greatly appreciated.
ps.
-internet worked fine while hooked into the router through a cable
-im network retarded
-I apologize for my ignorance
View 9 Replies
View Related
Aug 30, 2012
Lately I've been getting a sound prompt telling me a device is not connecting. Everything I need seems to be so I can't figure it out.
It's just a bit of a nuisance but I'd like to find out. Is there a command prompt to ask the computer what isn't connecting?
View 2 Replies
View Related
Nov 1, 2009
I've done a fresh install of Windows 7 yesterday on my desktop PC and I want to use the virtual PC for some USB hardware that doesn't have any x64 drivers.
I can choose the USB devices fine in the virtual machine, they are detected and XP starts the usual hardware install wizard.
However one of my devices gets the yellow exclamation mark in the device manager with a code 10 (device cannot start).
The virtual machine runs XP SP3, my laptop runs XP SP3 as well and there is no problem on there with this hardware. This leads me to believe that it might be a windows 7 Vmachine issue that is causing this.
I've tried removing the hardware and installing it again, but that didn't solve the problem.
Any ideas for a possible solution?
View 9 Replies
View Related
Jun 27, 2011
Somehow I messed up install of a PCI wireless adapter. Device Manager says 'device not working properly because it can't load drivers: code 31.
I've pulled the adapter card out. ran the computer awhile without it, reinstalled it and same problem.
Then I did the registry thing about upper and lower filter deletion but the filters are not listed. Yeah I went to the right place in the registry to look.
View 2 Replies
View Related
Jan 4, 2012
Windows 7 ultimate 64, my Atapi iHAS124 B ata CD/DVD device keeps "disappearing" try running the Microsoft "fis it now"...and get A driver service for this device has been disabled. An alternate driver may be providing this functionality. Code 32 Tried uninstalling the device and installing new drivewr....same result. This is the 2nd time it has happened...last time I ended up having to rebuild the system from scratch.
View 7 Replies
View Related
Mar 9, 2012
i have hp mini note book and found usb error 43 i have reinstall all drivers but still received error
View 1 Replies
View Related
Dec 17, 2012
D3d device error code 2005530516?how to solve this error?
View 1 Replies
View Related
Jul 5, 2010
i have a toshiba satellite l555d and i turn on the USB device say a error code 43.
View 3 Replies
View Related
Aug 7, 2011
I have been trouble shooting my sound for quite some time with no results. I've deleted and reinstalled drivers, checked bios, etc. no luck.here are my speccy details
View 10 Replies
View Related
Nov 4, 2011
My HP Pavilion with Windows 7 is not seeing my Samsung TS-H653L CD/DVD reader/writer. When checking my Device Manager for this unit, it shows the following message: "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)." I tried to "update this driver" but the answer is that "this driver is up to date". Can't find any website with Samsung TS-H653L driver updates. Tried removing the driver and rebooting but same thing happens.
View 3 Replies
View Related
May 25, 2009
I have 2 8600 GT 512 video cards, 4GB installed RAM, etc... in device manager one of the cards is enabled, one says
"This device cannot find enough free resources that it can use. (Code 12)
If you want to use this device, you will need to disable one of the other devices on this system."
It worked fine in XP. I have 2 additional displays I'd like to control with the second video card. I do not have them connected in Sli. I uploaded a pic of the error message.
View 4 Replies
View Related
Feb 8, 2012
Issue with an HP deskjet D4363. It worked just fine when I bought it in November and then just stopped.At first it would print 3 or 4 lines and then freeze. Now it does nothing and isn't even recognised by windows as a printer.I have a code 43 error unrecognised device in my device manager under usb.
View 1 Replies
View Related
Nov 28, 2011
Windows 7 has stopped this device because it has reported (Code 43) usb?
View 2 Replies
View Related
May 30, 2012
Windows 7 has stopped this device because it has reported (Code 43)?
View 1 Replies
View Related
Jul 30, 2012
My usb composite driver says code 10
View 1 Replies
View Related
