TV Is Not Being Recognized By MSI R7770 Graphics Card Anymore
Aug 1, 2012
I have got a problem which has occurred just few days ago. My TV could not and still cannot be recognised by my graphics card, meanwhile my monitor is working properly. I always use TV for watching movies, videos and whenever I am too lazy to get off my bed.
Recently I have changed my graphics card from nVidia GeForce GT 320. The new card's drivers may not be working properly and every time I turn on my PC, OS crashes on start up. Blue screen appears, showing that physical memory is being dumped. Then restarts. I select "Start Windows Normally" option. After everything loads, I get a message on my desktop saying error related to OpenCL.dll.
So one day I turn on my PC, go through all the rough start up and try to watch video through my TV and it is not recognised. I tried to repair it by checking all connections, AMD Catalyst Control Centre and "Screen Resolution" option on desktop (right click).
After my TV wasn't working with my PC, I left it alone. I was looking for solution online but nothing useful. Next day I came back from work and I tested it. It surprisingly worked and was showing all as before. The day after that it didn't work again.
Here are some answers to questions you might want to ask:My TV is 42" Philips Smart LED Easy 3D 4300 series (Full 1080p). My monitor is simple 24" AOC screen (Full 1080p) and it is connected through VGA cable. My graphics card is MSI Radeon R7770 1GB with MSI Afterburner. I have got TV connected from HDMI in my PC's graphics card to TV's 3rd HDMI plug. I have checked every connection and nothing has been touched since I was using it as usual. TV has been updated with latest firmware. So has the graphics card.
I have recently had some video issues with my HP Probook 6550b.
Basically, I have recently had the heat sink, motherboard and monitor all replaced. My ongoing issue is that now Windows does now not recognize my on board ATI graphics card. If I install the drivers from the ATI website it does not acknowledge that the adaptor exists at all. Conversely, under Device Manager, no display adaptor is listed.
I have also installed the 64 bit BIOS update and graphics drivers from the HP website with no success. Interestingly, If I attach an external monitor, reboot and enter BIOS. I can close the lid, and the external VGA monitor works. However, when I then log into Windows and then try to use the secondary monitor, it does not work.
HP have informed me that as the external VGA out does work, it is not a hardware problem with the graphics adaptor. How do I go about getting this issue resolved? Currently, all video is jittery and the brightness is sub-standard.
I have been having a problem recently with my GTX 560 graphics card. Anytime the computer is shutdown when it restarts the graphics card drivers are not recognized and it begins the process of reinstalling them. Then when I restart it works again.
I went to plug in a CF card into my system as I do weekly to download pictures and windows says I need to format the card (it is formatted and there are pics on it) when I tried to format the card via windows it won't format the card. When I tried to hook the camera up to the PC using a USB cord it said the same thing. And when I plugged a flash drive into the USB, it also has the same error. Device properties show an exclamation mark by all the drives exceot my hard drive.Is this most likey a driver issue? If it is, would using my win7 disc and doing an install over the current Win 7 fix the issue? I'm not super technical to trying to fix the USB drivers themselves is not really in the cards.
i have heard a lot of my friends saying that they are unable to play high resolution and high definition games on their pc and told that they are on a low budget to buy a graphics card.here is a solution for that:there is a software named 3-d analyzer available in the internet which acts as a virtual graphics card for playing games. you can enter the graphic card needed from the 4 available graphic cards available and then you can get the attributes of that graphic card..if fine tuned,you can play games at the range of a 128mb ram virutal graphic card on your non graphic card pc. note:graphic intensive games,that requires atleast 512mb of graphics memory can't be played through 3d analyzer if you don't have a graphic card,but you can try running it if you have a 256/128 mb card. steps for using the 3-d analyzer software, *first download the file from here, *then extract that software and open the software, *then,select the exe file of the game that you want to run, *choose the select option, *then you can choose the attributes the options you require to play the game,*the attributes may be pixel shader or disable rendering in the game or emulation or some other options specified, *then,enter the device id and the vendor id for the graphics card you need from the available graphics card on the right.*i would suggest the ati radeon 9800pro to run most of the games like fifa 08/09 or prince of persia two thrones/sands of time, *then choose the run option and then i assure that the game would run for you at a decent/playable speed. note:1.if it shows any error that a file is not found pls reinstall the software.2.if the screen turns black/blank then play with the options in the s/w, by trial and error method,if fortunate,may be,you'll be able to run your favorite game.3.if pixel shader/shader version x.x not found,then select the appropriate shader model and run the game. all the best..happy gaming..if any queries post it below.how to: use 3d analyzer video at Internet
I bought Dell Inspiron 1564 n series (without OS) and put Windows 7 Ultimate 32 in it.OS installed fine but integrated graphics isn't recognized.I went to Dell,downloaded chipset drivers,but on intel graphics drivers I get answer "This computer does not meet minimum requirements for installing the software."Mind you first I have tried 64 bit Windows 7 enterprise version but with same result.I thought it's 64bit thing so I went to 32bit.I think I tried it al> Platform : Intel Calpella> Mainboard : Dell 0JY92C> Chipset : Intel HM55> Processor : Intel Core i5 450M @ 2400MHz> Physical Memory : 3072MB> Video Card : Standard VGA Graphics Adapter> Hard Disk : Seagate ST9320325AS ATA Device (320GB)> DVD-Rom Drive : HL-DT-ST DVD+-RW GT32N> Monitor Type : 1K0R2�156WH2 - 15 inches> Network Card : Broadcom BCM4310 USB Controller> Network Card : Realtek Semiconductor RTL8101 PCIe Fast Ethernet Adapter> Operating System : Windows 7 Ultimate Professional Media Center 6.01.7600 (32-bit)> DirectX : Version 11.00
I purchased diablo 3 for my husband & my video card is not supported so he's unable to play, my computer is a HP P624 f-b desktop with a Intel GMA intregrated graphics, I am aware I need to up my power supply also, I have no idea what video card can be used to upgrade so the game is playable, not looking to spend a fortune?
I installed this USB PCI card: 5 Ports High Speed USB 2 0 PCI Card Expansion Kit 4 External 1 Internal for PC | eBay when I booted, I didn't get any alert that new hardware was installed. I think I installed it correctly into the motherboard. Is there a driver that I need to install? or it's probably becuase it is not installed correctly?
I've completed a new custom build, but have had problems with BSOD from the beginning with any installation of Intel Graphics drivers or the installation of any graphics card.
When I first completed the build, the XFX-7950 Black was installed. I booted to BIOS without issue, but when I inserted the Windows 7 (64 bit) it would boot through the windows logo screen but immediately BSOD right after going to the first install screen.
I removed the graphics card, and was able to complete the full Windows install without issue. I updated Windows and the drivers on the system but as soon as I installed the Intel 3000 Graphics driver, it would BSOD on every restart. I recovered back prior to the Graphics driver install and installed all other drivers. I updated the BIOS to the latest version.
I have reattempted the XFX 7950 multiple times in different slots, but with the same results. I also attempted my Radeon HD 4550 from my old computer but it gave the same results. It always boots through the Windows logo screen, but BSOD within a few seconds of reaching the password screen.
I broke down and installed Driver Whiz, which did detect multiple outdated drivers that I had not caught, but none of these fix the issues.
I've attached the requested zip. I don't think all BSOD's are showing up, as I've had to use recovery points after installed drivers didn't work. The last .dmp on 19 JUL was a Intel Graphics driver install attempt that I pulled off in safe mode before recovering back to the pre-driver point.
System: ASUS P8Z68-V Pro/GEN 3 Intel 2600K XFX R7950 Black Edition OCZ 850W Crucial 128 GB SSD Seagate Barracuda 1 TB HD Corsair H100 Windows 7 64 bit (full)
I recently installed Windows 7, and most seemed to be fine. However, I just moved to college for the semester and I usually use wireless at school. I have a wireless card/adapter and it used to work fine on XP, but Windows 7 doesn't seem to recognize it at all. I checked device manager and the only network adapter is 'NVIDIA nForce Networking Controller'. Under 'Other devices' is 'Network Controller' with a little '!' next to it. This may be the wireless card, but I don't know how to make it work.I really need to get this wireless working, otherwise I could be screwed. I never removed the card so it should be in there. Not sure why windows 7 is not recognizing it (in fact, I used to get annoyed when the 'Wireless network detected' bubble popped up on XP. Now I want nothing more!)
Recently ran a bunch of malware / antivirus programs to get rid of a zeroaccess trojan. (malwarebytes, mcafee, cccleanter, eset, hitman). Was finally able to get rid of the viruses in the services.exe and desktop.ini files. However once they were cleaned and got everything back to normal, I'm having problems with my video card being recognized by anything. Only recognizing the Intel® and not my Nvidia gtx 560M. It's not listed on the dxdiag page, not showing up as a selectable option for The Elder Scrolls Skyrim. Was working fine a few hours ago. It's listed under device manager just not showing up anywhere else. Just wondering if getting rid of those viruses might have deleted some needed .dll or something
-HP Pavilion p6750z Desktop PC-AMD Athlon(TM) II 250 dual-core processor-6 GB RAM-512MB DDR3 AMD Radeon HD 6450 (PCIE)-Windows 7 Home Premium 64 bitSo, two weeks ago I bought a desktop PC from HP. I wiped the drive to get all their vapor ware off, installed my software and everything went fine. Windows Update recognized the hardware on my machine and downloaded and installed the appropriate drivers after the wipe.Here's the problem. My girlfriend followed suit two weeks later and asked me to do the same thing for her. Our machines were slightly different but for the most part I expected a similar experience. Except it wasn't. This time Windows Update failed to recognize the Video Card after the wipe.So now she has this nice video card sitting in her machine using a Standard VGA Adapter instead of the Radeon drivers it needs. No matter how many times I download and install the Catalyst software from ATI's site it doesn't catch. What am I doing wrong?
We just bought an 8GB SDHC Transcend micro SD card from amazon. I did not realize there were probs. I put it directly into my tower in the card slot and nothing pops up. If I put my regular old 2GB micro SD in the slot, it immediately pops up, but not the SDHC card. Is there a fix for this? Something I can download to make it recognized or did I waste my money and get a piece of junk? Please help. This was actually my son's money; he wanted this, and I did not realize there was an issue with these until I googled the prob and had tons of people's complaints pop up.
I am having a problem with memory cards (SD) contents being recognized on a Windows 7 Pro machine. I am using an internal card reader, and have virtually eliminated it being a hardware problem because a new replacement unit gives the same results.The first time a card is placed in the reader after the computer is booted, the card is recognized but not the contents. In Windows Explorer, the card is designated "Removable Disk (H)". When I attempt to navigate to the contents, a window opens titled "Insert Disk", prompting that a disk be inserted into the drive.I can correct this on subsequent card insertions by clicking on the "Safely Remove Hardware and Eject Media" icon in the system tray. When clicking on the specified card/device (only item showing) I am prompted that "Removable Dish (H)" is currently in use". There are no applications open including Windows Explorer. Of the choices given, (Cancel, Try Again and Continue) selecting Continue results in an indication that it is safe to remove the hardware.When I remove the card and replace it, I don't get the expected Autoplay prompt, but when I open Windows Explorer the disk shows with the same drive designation, but this time with the volume showing instead of "Removable Disk". I can then navigate and find files and folders on the card.Removing the card again and reinserting it using the same procedure the second time results in the Autoplay window opening and the contents of the card being recognized in explorer. At this point everything works as expected and will continue to until the computer is rebooted.I would like to find a way to have the volume and contents of the card recognized and the auto play window open the first attempt after the computer is booted.
I installed the 7022 x86 version of Windows 7. Everything installed fine and there were driver issues which I anticipated but my Ethernet port is not working on Windows 7 or any other OS for that matter.
It�s a very strange situation. After it was not seen I Windows 7 I booted from my 2nd drive which has Vista on it and it was not seen there so I booted from my XP drive and it was not seen on there either.....
I have re-downloaded all the drivers for each version of the OS but none are making the NIC discoverable.
I have an nVidia 680i SLi & I am using the on board port.
I just installed a new PCI USB 2.0 card into my machine. I have a Line 6 Toneport UX8 that connects to the PC by USB as the interface for microphones and instruments. Because of the high volume of data coming down the pipe from this external interface it is pretty much a 'mandatory recommendation' to use a dedicated USB controller in a PCI slot.
Anyway, I installed the PCI card just fine but when I plug in the UX8 to it, Windows 7 reports 'USB device not recognized'. It is recognized if I plug it into one of the motherboard's USB slots though. I need to use this PCI card, otherwise the recording quality is useless. I know other people have this external interface and run it into a dedicated PCI/USB controller with great results. So I am hoping someone here can suggest what I can do to get Windows 7 to recognize the card and the USB devices plugged into it.
I'm hoping I don't have to reinstall the OS since it will be a pain to have to reinstall again when the commercial licenses come out in less than a month (I'm assuming I'll have to reinstall since I will be using an upgrade from my XP Pro that I have not used since trying out this Windows 7 RC).
I bought my laptop awhile ago and it has 2 graphic card drivers in it. One Intel and one from NVIDIA. It all worked fine until I decided to upgrade my NVIDIA Graphic Card driver. I think this is the cause although it could easily be something else. Either way after the new installed driver there was no way to run ANY program with my NVIDIA card. It does get recognized in the "Device Manager" but no program seems to be able to acces the NVIDIA.So I decided to download the lastest driver from the Dell site and install it. As that was the driver version I used back when it was working but I still seem to have the same problem. I don't really know what causes this.
I tried running a performance test to see if this program could use the graphic card but I seem to have no luck. Accesing the NVIDIA Control Panel and setting the desired program (or the global options) to automaticly run with my NVIDIA Graphic Card above anything didn't seem to pay off. I have searched with google for awhile but it's hard to use google if you don't know what your looking for. I found some things but I can't even tell if there connected to this problem.
Win7 as a host for VPC - Network card not recognized. I've just installed VPC over Windows 7 7077 but on the network settings I cant choose my LAN connection, I only have the option of Shared NAT?
Is there any problem reported regarding this subject?
when i got this laptop with windows xp - wifi worked perfectly. I've decided to install Windows 7 Home Premium 32bit, and it stopped. I cant find ANYWHERE ANYTHING about wi-fi - not in network tab, not in device manager. I've got RTL8168D/8111D network card, laptop is Lenovo Edge 15 (302-4CG). I've checked BIOS, pressed combination of keys to turn off/on radio and installed some drivers from lenovo site (Lenovo Support - Download Drivers and Software (US)), and i still cant see the card.
ipconfig - Code: Microsoft Windows [Wersja 6.1.7600] Copyright (c) 2009 Microsoft Corporation. Wszelkie prawa zastrzeżone. C:Usersadmin>ipconfig /all
I have an asus A8n-sli board with the Nforce4 chipset. I have creative x-fi xtreme music installed on the board and the sound works fine in XP.
The issue is that the when I try to install the drivers it keeps telling me that there is no compatible hardware installed. In device manager it shows an audio device but no available info for it. I tried the reinstall method and moving it from one slot to the other.
I am running 4 gb of ram, Windows 7 64bit and do have the on-board audio turned off via the bios.
I have tried installing drivers for the nforce4 chip-set but they will not work, Is that the issue? Are there a compatible set for this, I have tried the xp64 and vista 64 drivers but with no luck.
I am having an Acer Aspire 1680 notebook with an AC'97 compatible soundcard apparently from Conexant, however unfortunately Windows 7 does not seem to recognise it automatically. I can install the XP drivers successfully but then all playback is stuttering and laggy. I also searched for Vista AC97 drivers respectively Vista Conexant drivers but they all do not appear to be compatible.
Does anybody know whether there is a working driver for Windows 7?
Machine specs: Antec 900 ATX case Tyan Tiger K8WE S2877-G2NR mobo Dual AMD Opteron 275 dual-core @ 2.2GHz 3 GB Ram, 2x BFG Nvidia GeForce 9600GT in SLI config, 2x Seagate 750GB 7200RPM SATA HDD's Thermaltake Black Window 850 W power. LG CD/DVD/RW Creative Sound Blaster SE (model SB0570)
Dual Boot OS Drive 1 Windows 7 Ultimate 32 bit OS Drive 2 Windows 7 Ultimate 64 bit
Problem: Sound card works fine in 32 bit, but is unrecognized in 64 bit. All other systems nominal. Solutions tried to date. (1) Sound card un and re-installed. (2) SB solution SID 82669 (force detection through LGPE, D/L and install new drivers) Failed.
I was stupid and accidentally uninstalled my AMD Catalyst Program in an attempt to update the drivers. Now I cant switch to the card from the integrated Intel card. I can't restore the computer or re-install the program. When I try to re-install it, its doesn't work but there are no errors.
the xfx 1gb 4850 i had been eying is finally off the shelves the only place i find it is at frys and it costs 150+ s&h. do you guys have any other graphics cards you would recommend within the 100-150 usd category with at least 512 mb of memory.
Currently I have a graphics card Geforce 8400 (Nvidia). I want to buy another card HD Radeon 4890. I have a Dell Optiplex 760 desktop. Do both cards work in my pc from different hardware manufacturers?
I recently upgraded from XP to Win 7 Ultimate 32bit. I have always had two graphics cards - NVIDIA GeForce 7025 and AMD Radeon HD4300/4500 with the latter used to feed via HDMI cable to my Plasma TV.Since the upgrade, the AMD card appears to be the default card and any attempt to run the NVIDIA Control Panel results in a warning that "You are not currently using a display attached to an NVIDIA GPU".
The PC functions okay but I've lost a number of controls I was familiar with via NVIDIA and I may also be losing performance too. How do I get back to where I was under XP when NVIDIA was the main card ?
