SDHC Card Not Recognized
We just bought an 8GB SDHC Transcend micro SD card from amazon. I did not realize there were probs. I put it directly into my tower in the card slot and nothing pops up. If I put my regular old 2GB micro SD in the slot, it immediately pops up, but not the SDHC card. Is there a fix for this? Something I can download to make it recognized or did I waste my money and get a piece of junk? Please help. This was actually my son's money; he wanted this, and I did not realize there was an issue with these until I googled the prob and had tons of people's complaints pop up.
View Replies (Posted: 08-15-2009)
Sponsored Links:
Related Forum Messages for Windows 7:
High Capacity SDHC Cards Not Supported
I'm running the 32bit Windows 7 beta version and everything installed fine on my Toshiba Sat Pro laptop (a200GE-26q model). The media card reader can read a 2 GB SD card but not a 4GB High capacity SD card. Any one else have the same problem? There are no obvious device errors in the device manager.
Posted: Monday, January 12, 2009 8:44 PM
View 5 Replies!
View Related
Ethernet Card Not Being Recognized
I installed the 7022 x86 version of Windows 7. Everything installed fine and there were driver issues which I anticipated but my Ethernet port is not working on Windows 7 or any other OS for that matter. It�s a very strange situation. After it was not seen I Windows 7 I booted from my 2nd drive which has Vista on it and it was not seen there so I booted from my XP drive and it was not seen on there either..... I have re-downloaded all the drivers for each version of the OS but none are making the NIC discoverable. I have an nVidia 680i SLi & I am using the on board port.
Posted: 02-25-2009
View 9 Replies!
View Related
Realtek Card Reader Not Recognized
I've got an Acer 5735z laptop with a Realtek card reader, it was working fine under vista. I loaded up Windows 7 on a fresh install and all was well. I noticed it had install a generic driver for the card reader, so i updated the driver with the correct version from Acer. This was couple weeks ago and everything seemed fine until today, when I noticed the laptop now doesnt recognise the card reader. It doesnt even show up as an unknown device in device manager, it like it doesnt exsit. Ive downloaded the recent drivers for vista/windows7 to no avail. I've also tried unstalling the Intel usb contollers and even going back to the original version of the drivers again to no avail... the only thing i can think of is reverting back to the generic drivers supplied with Windows7, but i dont know where there located on the disk or on microsoft.
Posted: Tuesday, November 17, 2009 10:41 PM
View 5 Replies!
View Related
Virtual PC RC Smart Card Not Recognized
issue I am having as it is causing me to need to carry a second laptop.I am running RTM Windows 7 Ultimate x64. I have installed the RC for Windows Virtual PC and created another Windows 7 virtual machine as well as downloaded and enabled XP Mode. I am trying to connect via VPN to a corporate network that requires Smart Card authentication. I have ensured that Integration Features are enable, and the smart card reader is installed, but any time I try to connect it states the following. A smart card was detected but is not the one required for the current operation. The smart card you are using may be missing required driver software or a required certificate.I can't seem to find a way to get it to recognize the smart card itself, not the reader.In my host Windows 7 machine it works just fine.The smart card reader is the following from Device ManagerTexas Instruments PCI GemCore based SmartCard controller, it is PCI based, and has the default Windows 7 driver from GEmplus Version 1.0.1.20 The smart Card is the following from Device ManagerGemalto .NET Smart Card with the default Windows 7 driver from Gemalto Version 8.1.0.1 The VPN dialer starts but it states to please insert a smart card, if you look at details it knows there is a smart card in the slot but gives the message above that it isn't a valid smart card. It does this with both the XP mode machine and the Windows 7 machine that I have created manually.Has anyone experienced this or could provide additional steps to make this work.
Posted: Tuesday, September 15, 2009 9:01 PM
View 3 Replies!
View Related
PVR 250 TV Card Not Recognized
I have a dell e521 Athelon 64x2, 2g memory. It came with 32 bit Vista Home Premium installed. I added a Hauppauge PVR-250 TV card. Vista immediately recognized it, Media Center started using it and everybody was happy. I installed Windows7 rc 64bit in another partition. It installed without a problem except it did not recognize the PVR-250 and Media Canter said '"You don't have a tv card!" The suggested remedy was to buy a different TV card! Thinking it might be a 64 bit vs 32bit os problem (although that wasn't mentioned) I installed Linux Ubuntu 9.04 64bit on yet another partition with mythtv. The PVR-250 Works great! Is there a way that the Vista drivers can be made to work or am I stuck with Vista or Linux?
Posted: Thursday, May 21, 2009 4:24 AM
View 2 Replies!
View Related
Usb Pci Card Devices Not Recognized
I just installed a new PCI USB 2.0 card into my machine. I have a Line 6 Toneport UX8 that connects to the PC by USB as the interface for microphones and instruments. Because of the high volume of data coming down the pipe from this external interface it is pretty much a 'mandatory recommendation' to use a dedicated USB controller in a PCI slot. I also have a security USB fob for my Cubase 5 DAW. It isn't being recognized to be able to allow the Cubase program to start. It is used to verify the authenticity of the Cubase program, and Cubase won't start if it isn't there. Anyway, I installed the PCI card just fine but when I plug in the UX8 to it, Windows 7 reports 'USB device not recognized'. It is recognized if I plug it into one of the motherboard's USB slots though. I need to use this PCI card, otherwise the recording quality is useless. I know other people have this external interface and run it into a dedicated PCI/USB controller with great results. So I am hoping someone here can suggest what I can do to get Windows 7 to recognize the card and the USB devices plugged into it. I'm hoping I don't have to reinstall the OS since it will be a pain to have to reinstall again when the commercial licenses come out in less than a month (I'm assuming I'll have to reinstall since I will be using an upgrade from my XP Pro that I have not used since trying out this Windows 7 RC). I have tried to unplug the PC from the wall per other forums suggestions to supposedly reset the USB info. I have deleted all hidden devices in 'device manager' that were greyed out. This got the devices recognized, but they still didn't work. i.e. The red light on the security usb fob lit up, which usually indicates it is working, but when I start up Cubase, Cubase can't find the device and won't start. I want to be able to plug this into the PCI cards internal USB connector (it also has four external) so that when I close up the box there is no chance of me accidentally knocking the security usb fob and damaging it. I did that once and it cost me about $60 and two weeks to replace! (Some DAW products if you lose the security usb fob, you need to spend hundreds of dollars to replace the whole program... i.e. they don't replace the usb fob). My motherboard is an Asus P6T WS Pro with an i7 920 Processor and 6 Gigs of DDR3 RAM. The PCI USB card is a Bytecc USB 2.0+IEEE 1394 Combo Card (BT-PCI-U2FW) with a VIA chipset I believe.
Posted: Wednesday, September 09, 2009 1:15 PM
View 8 Replies!
View Related
Creative X-fi Xtrememusic Sound Card Not Recognized
I have an asus A8n-sli board with the Nforce4 chipset. I have creative x-fi xtreme music installed on the board and the sound works fine in XP. The issue is that the when I try to install the drivers it keeps telling me that there is no compatible hardware installed. In device manager it shows an audio device but no available info for it. I tried the reinstall method and moving it from one slot to the other. I am running 4 gb of ram, Windows 7 64bit and do have the on-board audio turned off via the bios. I have tried installing drivers for the nforce4 chip-set but they will not work, Is that the issue? Are there a compatible set for this, I have tried the xp64 and vista 64 drivers but with no luck.
Posted: 05-19-2009
View 2 Replies!
View Related
Sound Card Is Not Recognized As Recording Option
I'm trying to record streaming audio from a radio station. I used Freecorder 2 from Applian the last couple of years on Vista and had no problems. Now Windows 7 is not showing the sound card as a recording option in control panel/sound/recording. It is not listed as either an enabled, disabled or disconnected device. The only two thing listed are external. A logitech webcam and an Ion turntable. Will Windows 7 not record internal sound? I am using the integrated sound card on a HP desktop (a6119h) and am using the latest driver. As stated it worked fine with Vista SP2.
Posted: Monday, June 29, 2009 4:34 PM
View 12 Replies!
View Related
Usb Pci Card - Devices Plugged Into It Not Recognized
I just installed a new PCI USB 2.0 card into my machine. I have a Line 6 Toneport UX8 that connects to the PC by USB as the interface for microphones and instruments. Because of the high volume of data coming down the pipe from this external interface it is pretty much a 'mandatory recommendation' to use a dedicated USB controller in a PCI slot. Anyway, I installed the PCI card just fine but when I plug in the UX8 to it, Windows 7 reports 'USB device not recognized'. It is recognized if I plug it into one of the motherboard's USB slots though. I need to use this PCI card, otherwise the recording quality is useless. I know other people have this external interface and run it into a dedicated PCI/USB controller with great results. So I am hoping someone here can suggest what I can do to get Windows 7 to recognize the card and the USB devices plugged into it. I'm hoping I don't have to reinstall the OS since it will be a pain to have to reinstall again when the commercial licenses come out in less than a month (I'm assuming I'll have to reinstall since I will be using an upgrade from my XP Pro that I have not used since trying out this Windows 7 RC).
Posted: 09-09-2009
View 7 Replies!
View Related
NVidia Graphics Card GeForce4 4200 Not Recognized
When I downloaded the beta I decided to really give it a test especially after the reports I heard and read about the reduced hardware requirements. I have an old home brew system that is vintage 2000. It has an MSI version nVidia GeForce4 4200 graphics card with 128mb of ram. I think it's AGP 4x. Not too shabby for back in the day. Not surprisingly, Windows 7 beta just gives me the generic VGA driver. Even if it had the driver I'm not sure if that card is DirectX 9 or not. On searching the nVidia site it doesn't look like they developed Vista drivers for this card, but I thought it never hurts to ask. Does anybody know if there's a driver out there to get some performance out of this card? BTW, I was impressed with the install. I had no device driver "problems" other than the graphics card and it works, albiet with the generic driver. The NIC card that I had in there to begin with wasn't recognized, but after some research, it was never supported in Vista either. I grabbed another NIC card out of the closet and it was recognized immediately. The other system specs are: Asus A7V333 main board, 1GB RAM, AMD Athlon 2200+ processor. Seems like adequate horsepower, although I haven't installed any major applications yet.
Posted: Friday, January 16, 2009 4:35 PM
View 9 Replies!
View Related
Acer Aspire 1680 Sound Card Not Recognized
I am having an Acer Aspire 1680 notebook with an AC'97 compatible soundcard apparently from Conexant, however unfortunately Windows 7 does not seem to recognise it automatically. I can install the XP drivers successfully but then all playback is stuttering and laggy. I also searched for Vista AC97 drivers respectively Vista Conexant drivers but they all do not appear to be compatible. Does anybody know whether there is a working driver for Windows 7?
Posted: 01-06-2009
View 9 Replies!
View Related
New Harddrive Not Recognized
I bought a new WD scorpio blue for my hp laptop. backed up all the data on my old hard drive, removed it, and put the new hard drive in. windows is not seeing it, and i'm not sure the bios is either. please help! i'd like to use the new harddrive (bigger capacity) instead of the old, but i don't understand how to have the system know the harddrive is there. the laptop is an hp compaq 8510w. i had Windows 7 running it on for about 4 months. the new harddrive is the western digital blue scorpio 500gb.
Posted: 10-19-2009
View 1 Replies!
View Related
Bluetooth Not Recognized
After switching from XP to Windows 7 on my Dell XPS M1210 I can't get Bluetooth file transfer to work with phone and other laptop. Troubleshooting doesn't provide answers. Which Bluetooth driver do I need to download and where do I find it? Any solutions please?
Posted: Saturday, January 02, 2010 12:28 AM
View 2 Replies!
View Related
CD Drive Not Recognized After Reboot
I'm using a Dell laptop Studio XPS 1640. Ok, I was about to upgrade to Windows 7 and it listed a couple of programs that needed to be deleted, so I uninstalled them. The 2nd or 3rd time I was required to restart my computer, it froze at the "Shutting Down..." screen for about 20 minutes. I waited and waited and decided to power down. I turned it back on, and it didnt say Windows was not shut down properly, so i figured it was ok. However when I booted back up, I was going to eject and re-insert the upgrade CD. I hit eject, nothing happens. Hit eject again, nothing happens. I go to Computer to try and view the CD thats in my CD Drive....NOTHING SHOWS UP! MY CD drive is now UNRECOGNIZED by my computer! Now I cant complete the upgrade. Not to mention, the upgrade made me uninstall itunes and my virus protection, saying a new version will be installed automatically after the upgrade.
Posted: 3 Weeks Ago
View 1 Replies!
View Related
Second Drive Not Recognized With Win7 RC
I have an AMD 64 (single core) processor based machine. Â It recently became my 'second' PC for testing. Â Previously Windows XP Pro was installed an used for a few years. Â This PC has two IDE hard drives. Â THe system in on the first drive, the second is for data only. Â With XP this was, of course, no problem.
Posted: Wednesday, May 13, 2009 1:26 AM
View 5 Replies!
View Related
Mouse Freeze Up Or Is Not Recognized
I have been testing Windows 7 Beta with all of the updates on an Insperion 600m. Surprisingly it worked fine and ran Office 2007. Suddenly my mousepad pointer locked up. I shut the computer down and connected a wireless mouse with no correction to the problem. I shut down a second time and connected a wired mouse and restarted the computer again. Again the mouse was motionless. Beside three dead mice what could be the problem?
Posted: Monday, May 25, 2009 8:30 PM
View 3 Replies!
View Related
ESATA Drives Not Recognized
I have Windows 7 Ult. and been having problems with my ESATA drives. If i dont use the computer for so long not to sure how long but seems like over 4hrs the ESATA drives are not in my computer's folder and can't get them recognized unless i reboot my system. I do not use the sleep or hibernation and i did turn off hardisks from sleeping under power settings. I have power setting to stay on all the time for everything but still my ESATA drives disappear.
Posted: Thursday, November 05, 2009 2:28 AM
View 4 Replies!
View Related
SCSI Drive Not Recognized
I've got my system installation on a SCSI harddrive and wanted to do the same on windows 7, but when I tried to install via boot it didn't show the two NTFS partitions SCSI drive.I then tried to install it from windows XP x64 but when I get to choose the drive the C partition I prepared in advance needed an LSI driver. I've downloaded all the drivers I could find for it, but nothing worked.Do I need a special driver for Windows 7 ? if so where can I find it ?
Posted: Friday, January 23, 2009 11:52 AM
View 1 Replies!
View Related
Sometimes Keyboard Not Recognized At Boot Up
When I boot up my system, my keyboard is not recognized sometimes. In the past it would not see my keyboard after being awaken from a sleep state, but that appears to have stopped. I have uninstalled both of my keyboard drivers (HID and PS 2) and switched keyboards! I had to rebot three or four times before it re-installed my PS2 keyboard driver. The PS2 driver is the 2006 32 bit Legacy driver that comes with windows 7. I am running Windows 7 64 bit business edition. I have a MSI X58 Premium Motherboard, I7 920 processor, ATI Radeon 4670 Graphics card, Enermax 500 watt power supply and two SATA hard drives (SSD 64 Gigs C: drive, Western digital 500 gb and a IDE DVD RW). I have tried several different Keyboards, with the same results. Does anyone know what could cause this?
Posted: Friday, January 08, 2010 5:11 AM
View 4 Replies!
View Related
Wifi Adapter Not Recognized
I have a problem with Windows 7 Release Candidate (beta rev7100). I have a Linksys Wireless-B (WUSB11V4) network adapter that I use to connect to my wifi router. It works fine under my Windows XP. However, as I installed Win7 beta, I didn't find any way to make it work. Tried to find a driver, but it does not seems to exist for Win7. Tried to install the driver I got with it, but it doesn't seem to work as it's for Windows XP. Tried to make Win7 recognize it by its own ways, but failed. The adapter's a 802.11b. Is that too old for Windows 7? By the way, when I try to plug it out, I hear a sound and when I plug it in again, I hear another one, but it does not seem to be the "hardware recognized" sound. Can anyone help or send a driver for windows 7?
Posted: Tuesday, May 12, 2009 4:54 PM
View 2 Replies!
View Related
None Of USB Connections Are Recognized
I have just installed Windows 7 32 bit and now none of my USB connections are being recognised. my computer specs are: http://www.acerdirect.co.uk/Acer_Aspire_9301AWSMi_Laptop_LX.AWP0X.008/version.asp Before I installed Windows 7 everything worked fine on XP. I have 3 Maxtor Onetouch 4 external hard drives, a logitech wireless keyboard and mouse. Even my iphone isnt being found when i plug it in. I get no response from windows when I plug the USB's in. I can hear the external hard drives powering up so it isn't a power issue and I have swapped all of the USB connection leads about and it doesn't make any difference. I've tried all of my hard drives on my friends computer and they all work fine. Ive looked through the forums for answers but cannot seem to find any that work. I have been to the disk manager and device manager and they cant find the USB connections. Ive also been to the Maxtor/Seagate website and non of their walk through seem to work or be applicable to this scenario. Any help that you could give me would be greatly appreciated as I'm a student and really need to access these external hard drives along with my i-Phone etc (preferably on my own PC).
Posted: Tuesday, November 03, 2009 6:22 PM
View 6 Replies!
View Related
SATA Drive Not Recognized
I attempted to install win 7 RC to my secondary drive.,which is SATA. After loading the drivers from FLOPPY, i was able to install the files onto the drive. After 1st reboot, the machine went into an endless look rebooting. I am assuming that after that reboot, it lost the drivers for the sata drive. my primary drive is IDE. The only way I got to install 7 was empty a partition on my ide drive. This OS does not look ready for prime time, not even a little.
Posted: Wednesday, May 06, 2009 5:04 PM
View 3 Replies!
View Related
|
TRACKER
