I've been having heating issues with my GPUs, they reach 60c on idle, and going around a few forums, I've noticed a services.exe in a few different places and a strange user, HomeUsers, who is not inherited and has special permissions which apply to "this folder only". When I go into change permissions, the option is greyed out. Anti-virus isn't picking anything up (McAfee) and a check disk showed nothing. Do I have a rootkit, and if so, what can I do?
I have a WD myBook that I have been using to store files on. It is connected via a USB to my wireless router. In explorer I can see it in my network section as well as map a drive to it. However, intermittently, it does not allow me to write or delete files on it. I know computers aren't suppose to do intermittently, but that is what it is.There are brief times when I can add and delete items. I just added one file about 20 minutes ago. For several hours before that, it was locked, and it is now again locked.I can go for days without any issues, and then I get a night like tonight where I can't get anywhere.
Google Redirect/rootkit infection (See here), I managed to get more or less rid of the thing. After this, I have encountered a "c0000135 %hs is missing" BSOD just after the end of Windows loading that I corrected by modifying the registry following. So now my installation works properly except that no internet connection is possible. I've been trying to do it via ethernet, wifi and mobile phone tethering and it just doesn't works. No IP address displayed, even when I try to force a manual IP (normally everything is sorted out via DHCP) or flush all DHCP/DNS... infos, the diagnostic tool from Windows concludes to a possible defunct driver. I've got a clean installation of W7 x64 (same version, up to date) on another hard drive and of course, everything works well (it's from this installation that I managed to properly clean up the other one and modify the registry). Little detail : I uninstalled Zone Alarm in a not really proper way so it may be something with it too.
I'm trying to sort out issues with my Windows 7 machine and want to disable/set to manual services that I know are not needed, but every time I have done this in the past (a while ago now) I invariably run into an issue where I've inadvertently disabled a service that was needed by something, and I end up scratching my head (as all of my hair falls out around this point) and enabling everything just to sort it..
Is there any utility that anyone is aware of that lets you toggle service status, with the option to reset to default or reset to last status, while showing a list of services that I've changed?
I can't seem to word it properly for a search engine to find relevant results, and find usually specific services and not something I'm hoping exists.
I wish the Services.msc mmc had a checkbox or some sort of flag to show altered services so you could sort them by that, which would help a lot, but it doesn't.
I am running Windows 7 64 bit. It has been running great until today when it wouldn't boot. The Repair Disc wouldn't run and I thought that a BIOS flash I had done had gone wrong. I eventually did get it to boot but it wouldn't fully load. I decided to try removing RAM. I have 4gb in two slots. After removing one of them Windows booted fine. To check the RAM I took the second one out and replaced the first one, again Windows booted OK. I tried them both together again and I was back to Windows not loading.
My computer has been acting up recently. After trying to oc my cpu I've been getting strange boot ups. It starts up then shutdowns then boots up again. But it still works after that i just don't like that.
since i installed windows 7 on my pc (formerly win xp) i've got a really strange problem,At first everything works fine, but after a few minutes or a few hours keyboard and mouse turn off. Not necessarily at the same time, but in the end none of them is working. But apart from that everything works fine, the computer doesn't freeze. Keyboard and mouse are both old PS/2 devices.Has anyone got an idea how to solve this issue?
Most of today, my laptop was acting fine. But after I installed the updates, something odd happened. I rebooted it to finish the updates as is expected, and when it rebooted, I got a sort of blank screen with a toolbar but with an error message that said it couldn't connect to my Windows or something like that. The error said something about Win32 being moved possibly or something. Sorry that I can't recall all of it. I rebooted again and since that time, it's been fine, although that first reboot after the error did give me a "PERSONAL SETTINGS (NOT RESPONDING) square.Any idea what could cause something like that just once?Everything seems fine now. I'm running a Dell Inspiron laptop that's about 15mo old, Windows 7, all the latest service packs. I just went over a thorough virus scan with someone in the virus area about a week ago and all was clear,will run scans again soon, should I post there again?
Something has generated a folder C:24982372e61d90cbb1511cba10 on my HDD. It's dated 26-Jun-2010 and contains 27 folders and 115 files. Most of the folders have four digit names and contain three files each, to a total of 195 MB. All the folders have the same time-stamp, as do their contents. The storage is no problem but I hate having things around I know nothing about. "Who ordered that?" applies. I don't remember a crash but it's possible. I'm guessing that it would be safe to shift the lot to the recycle bin.
Just bought a new PC. Runs Windows 7 Home Premium 64-Bit. I'm new to Windows 7 but have used previous Windows versions for years and years (but not Vista). And I've never seen this happen with any other operating system. Out of the box, Windows 7 sets up this "My Documents" & "Public Documents" system of folders (and the same for pictures, music and videos). And that's great for separating each user's documents and providing common folders which all users can see. But, shortly after setting my new PC up (installed a printer & some other hardware bits, installed Office & copied my document files across from the old PC), Windows suddenly renamed the "My" & "Public" versions of the documents, music & videos folders. Looking at it all via my own account (I'm admin, by the way), I had folders called "Documents" & "Documents" instead of "My Documents" and "Public Documents" (and the same for music & videos). But it kindly left me with "My Pictures" and "Public Pictures" folders. This has actually happened on two machines now. It happened on the original new PC. But the store exchanged it with an identical new machine
When I woke up this morning and turned on my computer, two popups appeared: One from ESET SS4 telling me that C:Users*user*AppDataLocalMORYRUs.dll was infected, one from Windows RunDLL telling me that the same file could not be loaded.I googled the filename without luck and could not think of the usage, so I closed down rundll32.exe from my processes in the task manager and deleted MORYRUs.dll. I also launched CCleaner to clean up my registry files. Now, each time I reboot I get the annoying popup from RunDLL, telling me that this file can't be accessed. How do I get rid of it
For the past two or so weeks I've been getting this screen after turning on or restarting my computer. I'm not sure what it is or whats causing it, and all I have of it is this picture I took with my phone.The text appears in the upper left hand corner of the screen. It doesn't stop me from booting or anything, all I need to do it press a key and startup continues like it normally would.
this thing shows up every now and then in my Taskbarshows up just for a second and then disappearsit looks like camera, a gear, and printerany ideas on what it might be?
So - downloaded and installed Windows 7 from a memory stick.
Installed apparently ok.
Re-booted - came up with the "popular" NTOSKRNL.exe missing/corrupt error.
Re-copied various files; hal.dll, ntoskrnl.exe etc as directed on various sites - no joy.
Thinking it could be a MBR fault and not being familiar with Vista/Windows 7 I stuck in my old XP install CD to use Fdisk.
With the XP install CD in the drive, Windows 7 boots perfectly! (Doesn't even attempt to load XP install/repair)
Take out CD - NTOSKRNL error.
Once in Windows 7 - everything works fine.
Looking at various other options, came acorss a couple of tips about BCD and bootrec such as: How to use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows
Error message when you start Windows Vista: "The Windows Boot Configuration Data file is missing required information"
Bootrec used to say the only OS was C:Windows.old.00
Ran fixes as above - now says there are no OS installed.
Windows 7 repair console only finds Windows 7 OS
Am starting to go insane.
To summarise:
Recieve NTOSKRNL.exe error when booting up PC
Boots Windows 7 fine with WinXP install disk in drive
I have a folder whose name is a large mixture of characters and letter. Required Admin privilege to open and in there is one file mrtstub.exe, 83 KB dated 3/4/12.Looked it up and some sites state it is a virus, might be a virus or is part of the Microsoft Malicious Software Removal Software. I've software in MS updates but I've never seen it run and don't know how to run it or if I want to run it. I have MSE updating but not running real-time protection. Use it as a manual scan once a week.So the question is, can I delete the file and the folder. I mean it is dated 3/4/12.
I have two hard drives, each has two partitions, XP is on C and Windows 7 is on the second hard drive. XP was installed first. then 7 in a dual boot. When I am in XP I can see all the hard drives like normal. When I am in Windows 7 I cannot see the C drive with XP. Windows Explorer only gives several folders on C, none of them Windows. Is this normal and do others have the same thing? Or is something amiss with my computer.Also, can I install programs to the same place for both systems? I tried a couple small ones and they seem to act all right. I am installing my programs to the second partition of my second hard drive. (Windows 7 is on the first partition). Is this ok to do or will I run into problems.
I recently bought a new Asus laptop with Intel I5, Windows 7 Home Premium Edition 64 bit installed. Using Microsoft Office 2003 Professional, I get intermittent errors while typing. Mostly with the? key and the ' key. Occasionally it will show a peculiar character and the only way I can avoid it is to find another ? I typed in the document prior to the error and cut and paste it in.I also updated to Office Professional Edition 2010 with the same results.
The usual utilities associated with ATI catalyst software, my Kaspersky security software, the weather channel app. But then this one started, and the only thing I could see on the taskbar looked like an open application such as Word - and a title of MyOleComputerWi..., and a small black square maybe two inches square on the screen. This ran for approximately 3-5 seconds.
My girlfriends laptop keeps getting strange shortcuts on the desktop that we/she did not want or put there.. They are just plain folder looking shortcuts and have odd names like ")." or "))/.."or ".))" ...I cant remember the names exactly but they are similar to that. We delete them and they come back in a few days. I've run the virus scans and malwarebytes scans and found nothing...
I have a very strange problem. Windows vista wont recognize my touchpad's scroll (when I move my finger up and down on the right side of the toucpad nothing happens). Ive tried fixing it in the control panel, but I apparently cant.
Also, I use a western spanish keyboard and I cant use @ (in spanish keyboard is (AltGr+Q)). I can only use it by changing the keyboard to English (Shift+2). Anybody has a solution??
windows 7 36 posts Gaithersburg,MD.I have a devil of a time quite often finding documents I just created and saved. But I did not look which folder it saved it in, since from years of working with computers it would always save it to Documents, where a normalperson would want it.BUT I noticed (after hours of searching,) that it saved the document (a .pdf file) in a Folder called XKVBTW02, but NOT also in Documents.This drives me crazy. It's idiotic!!! Why does it do that and why could I not find it when I searched for .pdf?How do I fix this so every document is saved in the Documents folder?TW It also did not show up under Recent documents, that why it took me hours to find it again. In above crazy folder.I have worked with some documents today and saved them "save as" and gave it a name. But I did not look what folder it went into since I was used from years of computing that it would go to my documents.
I notice since upgrading to Windows 7, Explorer shows some quirky behaviour compared with the XP version.My current irritation is when I open a folder containing (say) 500 jpegs that were in filename (ascending) sequence, the folder opens quite quickly and I can see the file icons, but I get a message 'Searching for items...' and a progress bar at the top of the window which takes up to a minute to complete. The end result is always the same... the files are now sorted into descending sequence.It seems to be the case only for jpegs, only when sorted on filename, and only when 'Large Icons' were selected. Even then it only seems to display this behaviour when the folders contain a lot of files (maybe more than 200 jpegs).And it doesn't seem to matter whether or not the folder has recently been opened.I note that if I click on the 'X' next to the progress bar, to stop 'Loading', there isn't a problem.The thumbnails have already been drawn, so what's going on during this process? And why the inversion?
The power options settings in the first option shows a strange language...I dont know exactly what it is. Can anyone explain to me this and how i can change it to normal?
I'm having a weird issue. i'm not sure where or why but these symbols on my shortcuts are changing to things like a lock, a grey X, a green Check mark, or two people next to each other there are a couple of Pics attached. they seem to only appear intermittently.
Anyway, this is my issue. Whenever I turn on my monitor, I find my resolution gets changed to 1280x1024 instead of my native 1440x900. This happened with the latest nVidia driver, the older nVidia drivers, and the built-in Microsoft driver. I couldn't get my native resolution back unless I rebooted the machine entirely.
This bug has gotten under my skin to the point where I went back to using Vista, which I didn't want since despite that issue, Windows 7 was a treat to use. Does anybody know why this keeps happening? My video card is an eVGA GeForce 9800GTX+ and my monitor is a Gateway 19 inch FPD1975WH if that helps.
I have a Shuttle sitting below my Samsung HD TV and I connect to it via HDMI cable, this all works (worked) fine under Vista.
Now I just installed 7 build 7077 (downloading 7100 as we speak to see if it's fixed) and tried to do the same...installed Windows 7 without a problem with my LCD monitor enabled.
My HD TV is detected, I can change resolution etc. make it my primary monitor, that all works. Installed drivers for my ATI x800.
The problem is: I want to ONLY use my HD TV. When I tell Windows 7 to only use Desktop 2 (HD TV) I get black screen...this works fine if I tell it to use Desktop 1 (LCD).
When I just remove my LCD it's still in extended mode and when I restart I get black screen on my HD TV...
In CCC I can disable my HD TV but not my LCD...nothing happends...
