Powering on the computer and following the Windows logo, there is a black screen that the cursor can move around on, but it stays that way for a long time. It was over 8 minutes for the login screen to come on. I typed the password and then the same thing happens, black screen complete with cursor and it takes literally 8 minutes or more to come up to the desktop. Once up, everything is bogged down and takes forever to come up when clicked (ie control panel, windows start button, etc.) if they come up at all.
"When it comes to compatibility, if it works with Windows Vista, it should work with Windows 7. There are no major API changes, which is a critical point: that means that if there's a Vista driver for your hardware, that should work under Windows 7 without issue. That's great news, because driver issues were one of the top frustrations for people moving to Windows Vista with XP-era hardware.
Windows 7 will be more reliable as well - there are some improvements in reliability and self-diagnosis. There will be fewer prompts for user account control for instance, and in fact the default will be at a lower threshold than it was for Vista. There will be more controls for the user regarding account approvals, and it will be more discoverable than it was in the past."
I've been having this problem for the past couple of months and it's driving me insane. I've searched for hours on end without any luck of a fix. The problem is that my mouse lags (or stutters) every 5 seconds. The lag can sometimes be so bad that the mouse completely stops working for a few seconds. I've gone through 3 mice and they've all had the same problem so it can't be because of the mouse. The mouse I'm currently using is the Logitech Anywhere MX.
I have to use 'System Restore' from time to time to restore my computer. The instructions says: System Restore helps you restore your computer's system files to an earlier point in time. It's a way to undo system changes to your computer without affecting your personal files, such as e-mail, documents, or photos.' This is NOT correct. If I have used my Borland or Lazarus pascal compiler to compile a program on the same day I perform a 'System Restore', afterwards all executables, .bat, a some other files will be missing in a personal folder (latest example: C:CodeTyphonLazarusALazarusProjectsAsyncThreads missing the above file types). I have found other program executables missing also. The only thing that saved me today was the knowledge that Windows does this. I backed up my program project files before doing the 'System Restore'. Before you do one, you need to back up your personal files. Before the 'System Restore', make a list of all your software executables and then see how many are missing after the restore so that you can replace them. It seems to only delete those files of programs that you have used on the day of the restore.
Yesterday my friend needed me to test something for him in MySQL, a program I had installed a while back. When I tried to get in, it told me that I needed a root password. Since I forgot that, and I had no idea how to log in, I used Revo Uninstaller Pro to uninstall MySQL and delete all the leftover files and registry values that it left behind. I'm not sure if that is what caused it or something else that I can't remember, but since last night a lot of my computer services aren't working.For one thing, I can't log into MySQL.I can't install/uninstall any programs. - Solved.I have my Control Panel listed as a menu in my Start list, but when I highlight it, it shows the Control Panel as empty.I can't turn on my Windows Security CenterI can't access/turn on System Restore and clicking on 'Turn System Restore on or off' does nothing.I can't access System Information - Solved.or System Properties - Solved.In addition, I can't click the properties of any folder (If I try to right click My Computer and hit properties, nothing happens), my computers sound is not working, my taskbar shows my internet as offline even though its working and I can't open pictures - Solved.I also cannot run SFC / Scannow - Solved.or run Windows Update - Solved.I also feel like there might be something wrong with my graphics diver, because as I've been typing this post, my screen keeps flashing to my desktop - Solved.I cannot pull up my specs using the program 'Speccy' because it says Class Not Registered for everything. I've also lost the CD for my Windows 7 Ultimate, so I don't know if I could use that to fix it. - Solved.Edit 1: My video driver was in fact affected by it, as I can't watch any videos, and attempting to crashes my firefox plugin process.
I personally wait for it to be available via updates, or at least the Firefox page. They actually didn't release a version once as it had issues. But, if you must.
Yesterday my friend needed me to test something for him in MySQL, a program I had installed a while back. When I tried to get in, it told me that I needed a root password. Since I forgot that, and I had no idea how to log in, I used Revo Uninstaller Pro to uninstall MySQL and delete all the leftover files and registry values that it left behind. I'm not sure if that is what caused it or something else that I can't remember, but since last night a lot of my computer services aren't working.I can't install/uninstall any programs.I can't access/turn on System Restore and clicking on 'Turn System Restore on or off' does nothing.I can't access System Information.I can't access System Properties.In addition, I can't click the properties of any folder (If I try to right click My Computer and hit properties, nothing happens), my computers sound is not working, my task-bar shows my internet as offline even though its working and I can't open pictures I also cannot run SFC / Scan now or Run Windows Update.I also feel like there might be something wrong with my graphics diver, because as I've been typing this post, my screen keeps flashing to my desktop.
My video driver was in fact affected by it, as I can't watch any videos, and attempting to crashes my fire-fox plugin process.I cannot pull up my specs using the program 'Speccy' because it says Class Not Registered for everything. I've also lost the CD for my Windows 7 Ultimate, so I don't know if I could use that to fix it.I can't log into MySQL. I have my Control Panel listed as a menu in my Start list, but when I highlight it, it shows the Control Panel as empty.I can't turn on my Windows Security Center
In Windows 7 is this 256-color palette corrpution bug which is caused by EXPLORER.EXE program. In this bug colors are transformed in some strange psychedelia experiment. Does this bug have been reported to Microsoft or not because this is really annoying problem?Somebody have fixed this by killing EXPLORER.EXE with command line utility.Where is RUN button in windows 7 like in Windows XP?
For some strange reason today, whenever i download a file from the internet, it finishes but the download box automatically dissapears and the file doesn't show in the place i asked it to save.
Ive tried several different files, and have also tried using firefox instead of IE8.
I have a ACER D255 netbook with intel atom N550 (1.5ghz, 1mb L2 cache) 1gb DDR3 memory and 250 gb hdd. lately it has been a tad slow and freezing up will using google chrome. my task manager says right now that CPU usage is 4% but Memory is at 75%, sometimes up to 90%. it also says that i have 89 processes running.
I've had a major crisis this morning using Acronis to reclaim an empty 8gb partition.The hdd from left to right, in disk manager was:8Gb Empty (formerly page file) || D:Data 210Gb Data || R:Recovery 80Gb Recovery Using Acronis I expanded the 210gb to include all the 8Gb so now it would be:D:Data 218Gb || R:Recovery 80Gb Recovery After the re-start, in Computer, it says I have D:Data 8Gb plus 80Gb Recovery.Acronis tells me I have D:Data 218Gb plus 80Gb Recovery Disk Manager tells me I have D:Data 8Gb AND D:Data 218Gb plus 80Gb Recovery.The 140Gb plus of files that where on the original D: when at 210Gb have disappeared.Recuva only recognises D: as 8GB.
I have recently had a problem where my computer slows down so much it wont start programs up or even shut-down. It is usually after starting games like counter-strike source and such up.
Major computer manufacters generally speaking provide pretty good support for drivers and updates. I thought it might be useful to provide links for them in order to expedite troubleshooting driver.
And I have no idea how. I noticed that iTunes deleted more then half of my photos off my ipod, but didnt think anything of it, and then i started yahoo messenger and it said it was corrupted and to run a chkdsk. So I did, and this is what it came up with (below). What caused this? All my photos are back, it said it was recovering orphaned files and stuff. But there was too many to count. [code]
I have just installed Windows 7 and I'm having some major trouble with my graphics card. I had Vista installed, and just got my laptop from back from Dell after some repairs for faulty motherboard/GPU. I have wiped my hard drive and started fresh by installing Windows 7 Build 7100.
All seemed good when I first opened it up, everything was nice but I noticed I only had Vista Basic color scheme. I had a look in device manager and under display adaptor it had Standard VGA adaptor listed.
I then installed my nVidia driver number 185.85 and upon restart I got a black screen after welcome screen. I then rebooted and all seemed fine. After around 15-20 seconds of use windows would lock up for a minute or so, then flash a BSOD and then reboot.
I figured it was a driver issue, so I jumped on and downloaded the latest driver for my graphics card (GeForce 8400M GS) which was 186.03. This had the exact same result. Random shutdowns and failing to boot, alot of freezing when I could boot.
I have found if I go into device manager and disable it, I can run windows 7 fine but can't use screen savers or basically anything that needs graphics.
I've had the computer for about a year, a custom build...it's been working fine, then all of a sudden the problem started & now I'm suffering serious lag & slow down even with the most simple tasks (like clicking on the start icon) the HDD light is on continually & I can hear the drive clicking away. It never stops. (Starts when the windows loading screen comes on)Boot time is also incredibly slow around 10 minutes to boot up.I've just done a clean install of Windows 7 pro x 64 and the problem still persists...no other software installed other than my graphics & sound card drivers.The workstation isn't connected to the net I use a laptop for all that/this.On Task Manager my CPU is 0% & my Memory 6% which is fine..The drive is a Seagate Barracuda 500gb 7,200 SATA II.The programs causing this are mostly with-in "System" & SVChost" processes on the HDD.
For example: Windows service profile RtBackup NTFS free space map NTFS master file table Winevt logs
I have read many threads about these type of problems but with never any clarification.I've got a ton of work to do...and I cant even open control panel under 1 minute right now.
I have an older P4 2.8ghz Dell Dimension 3100 that currently has Windows 7 installed. Apparently the driver is the Sigmatel 97xx C-Major audio according to support.dell.com - the first thing I tried was the Windows Vista driver listed on Dell's site. Unfortunately that did not work. The driver appears to be installed and I have a sound device however I have no output through the speakers. I'm sure it is a driver related issue.
The device enabled, the speakers work and are hooked up properly. Any ideas where I can find a Windows 7 driver for the Dimension 3100 using the onboard Sigmatel 97XX?
I have been having random graphical issues. Sometimes in games (ie. COD4) the screen goes black when a new map loads. I then have to exit the game and reboot the PC, hoping it fixes my issue. Also, since I updated to the latest version, there are random graphical glitches in the game (weird objects on the ground and in the air in the game). Now the issue is much worse:
When I boot up my PC, my taskbar is completely blank, except for the Start Button. I'd be willing to deal with this issue if I knew how to fix it when it pops up. I uploaded a screenshot here: [URL] I'm running the latest drivers from Windows update from Nvidia. My motherboard is the EVGA Nforce 680i.
Im currently using Windows 7 Ultimate x64 + SP1 as my main O/S and also running a MS Virtual Machine which is using Windows 7 Ultimate 32bit + SP1. On my main computer I'm also running Ultramon 3.0.10 with two monitors. On the Virtual PC window where the close X and maximise and minimise command buttons are there is also two more there for Ultramon, one is expand the window over both screens and the other is move the application to the other monitor. The issue I've found is that when the Virtual PC is locked on my main screen, and I click on one of the ultramon buttons it will move the Virtual PC window to the second monitor and unlock the current Windows session that is running. (major security flaw)
I have A Dell XPS 420 with a Sigmatel Stac92XX C-Major HD Audio Driver and I was running Windows Vista X64 SP1 and everything was working fine.
I just recently installed Windows 7 RT Build 7100 and the Generic High Definition Audio Device Driver Installed and all types of media play, but it's causing a crackling sound in my audio and not only that it actually corrupts the file so if I were to play a MP4 on my XBOX 360 it also has the crackling noise even if the file was originally fine.
I don't know the last Sigmatel Driver that was on my Vista Build but I tried a few of them and even tried in Vista install mode but none of them work & I tried all the codecs packs that I always install and still nothing.
What should I do and is this a driver problem that's causing the crackling noise and corrupting my files or is their something else to this please help because it's driving me crazy?
I was customizing my task bar when I ran into this problem. I want my taskbar to be layered like this [URL] but I only have the icon changed and I want the layered icons also so I can have my Major icons on top and then minor ones on bottom but I cant figure out how to do that.
I have had my laptop for around a year now, and it's always been pretty fast for a cheapish laptop, It's an advent modena m100 in blue, but recently it has started getting real slow, like my CPU Usage is at 100% all the time and my Physical memory usage is running quite high aswell, without even having any programs open.
When I first boot up the machine and start using it (win 7 ultimate 64bit) the memory usage stays arround 40%. If I keep using it, the memory usage will slowly increase until it reaches 99%. If I boot up the machine and just leave it there for a couple of hours, the same happens.I try to restart (via windows), it logs off, shuts down the system, the coolers keep spinning, the motherboard lights are still on, but it doesn't boot up again. It remains like that. I have to restart via reset button or power button.
If I am surfing the net or looking up something on the net, my computer will almost come to a stop and get very very slow, when I go to the task manager, I find the CPU usage at 100% and just stays there. When I look at the processes there are several that are high (DWM.exe (20-23%, Taskmgr.exe, FireFox.exe
I am using windows 7 ( 64 bit ) my cpu usage is now 100 % and memory usage is almost near to 2 GB..I installed Avast months back.now i have newly installed Microsoft Security Essentials ..
1) when i try to uninstall Avast there is no uninstall option even in Add/Remove program it does not show up in list.
2) When i try to end process of Avast it shows me message ."Access Denied " although i am administrator and only single user
3) What i want just to keep my CPU Usage down ( almost 5 to 10 % Max )because i have not installed any thing to use CPU usage like 100 % I have visual 2008 with Sqlserver 2005 and office 2007, like these
My Audiodg.exe process is currently using 2,786,070 kB (not just normal bytes, kilobytes) of Ram. 2.66gb+ of Ram! I have searched the web as well as this site for any problems. My audio is working fine though... I have no idea why this using so much ram. Im guessing a memory leak of some kind... I restartand it starts off at a normal pace...
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD cmdGuard cmdHlp CSC DfsC discache ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
