Very slow operations like Start button, start an application, switch between windows. Sometimes stalls completely. Sometimes freezes so I have to go with power button. When inside an application - not so bad. I am having this PC second hand for about a year, getting worse gradually. AVG antivirus and tuneup say all is fine.
HP Pavilion a6207c
Windows 7 64
I own a Toshiba Satellite L645D-S7040, when i use my Laptop it will completly freeze randomly without any reason or warning. when it freezes nothing will move (mouse) and the is frozen in time. any program that was runing at the time is also frozen in the middle of what ever task it was doing. like if i was watching a video it would make a high pitch scream until i restart it. normally it freezes after 10 to 30 minutes after start up and at time it could take hours to days to freeze. After the freeze i check the event logs and the only thing posted is the fact that i shut it down. i even did a factory restore and it still does the freezing. and yes windows 7 is the stanfard OS i the laptop. it is only about 14 months old. i am thinking of buying a new hard drive but i would rather solve the problem then buy a hard drive.
View 1 Replies View RelatedWindows 7 Ultimate x64 on HP DC7600.I was really surprised that this old Microsoft issue/problem somehow got carried over all the way from the bad old days to new/shiny Windows 7.I have a main User account with Administrator privileges that is my 'daily driver'.I recently created a second User Account for Test purposes.[I'm a tech and need to try things sometimes].A week or so ago I "deleted" the User Account using the proper method...the way MS would have me to, in the UAC settings Control Panel. Today, due to another issue I am now having [never had before] I got to wondering if the old issue of ever-present zombie User Accounts was in this rig. YES it is. Checked into Documents & Settings and Registry and the account is still there in one state or another.How do I COMPLETELY eradicate that Account and all its traces?
View 5 Replies View RelatedThere is only one user on my computer - me. So is it possible to bypass the user system completely or would that require a full re-write of the filing system? Seems to me that I have little if any control over where files are stored. For instance, every time I download a file, it is stored in downloads by default. I then have to fish it out from this directory to save it where I want it saved.
View 4 Replies View RelatedSo yesterday in the early AM's I was browsing my internet and all the sudden, bam.i lost my internet.No reason at all, it just happened. This is only my computer, everything else works fine (If internet is out, our TV's don't work)When I go to my little internet icon in the taskbar, it says Unidentified Network and I have no internet access what so ever.When I run CMD and use ipconfig /release I get this:"An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified."I also got this error before:"An error occurred while releasing interface Local Area Connection : An address has not yet been associated with the network endpoint." Tech support kept telling me to use ipconfig /flushdns but whenever I entered it into CMD it gave me an error saying something along the lines of "command unrecognized" I cannot give you guys the full text of what CMD says since it's on a different computer.I am using a direct ethernet cord, not wireless.
* ipconfig /release and /renew and /flushdns
* Turn off firewall
* Update and Reinstall Driver
* Restarting my modem/router
* Restarting my computer
* Unplugging my ethernet cord and replugging it (also leaving it unplugged over-night)
* Manually assigning the 12 code I'm assuming IP
My main user account is my own , AdminMy secondary user account is for the missus, but , when she logs on using her account, everything runs slow slow slow, internet, picture load ups, program start-ups everything. ... . . what can this be down too and how could i speed up her account.
View 3 Replies View RelatedWhenever I try to navigate through my user directory (C:UsersMyName), sometimes it takes ages for the computer to respond. This was happening earlier when I was trying to access AppData so I could fix a GreaseMonkey script. Once the computer "unfreezes" (it doesn't really freeze, as I can use the mouse and other applications that don't have Explorer interfaces open), it seems that I can browse the same directories unimpeded for a time, but this is a regular occurrence, and something must be wrong, or some service that should be running is not.
View 1 Replies View Related- When I plug in the USB Flash Storage to my laptop, If I login as Admin, it can show the contents file very fast.
- BUT if I login as normal user, and plug in the USB Flash Storage and open its drive in Windows Explorer it need long time to open the contents. Did any one know what is the problem?
I decided to upgrade my Dell 1525 Inspiron laptop from Vista Home Premium (32 bit) to Windows 7 Home Premium (32 bit). I bought the Dell disks and ran the upgrade assistant first. It told me to uninstall two programs - which I did. I should say I do not want to do a clean install for two reasons (1) there will be so much hassle in re-installing programs, files etc. (2) people on the web who have this 63% problem report a clean install aslo fails at 63% and they are even worse off then before!i have now tried four times and each time it fails at the last hurdle at 63% when it is transferring files back to the system. A search of the net will show that several people have experienced the same problem (there is also one at 62%). After my first failure I tried the tips of unplugging the LAN/Internet connection; inserting MIG-UPGRADE-UGBIRE-PLUGINS etc.; I disabled most things in the startup list but each time it failed at the 63%. I left it running for 7 hours over night just in case the 63% needed time to sort itself out but it made no progress.I don't have any unusual software - Kaspersky Internet Security, Mailwasher (which I disbled during the last attempt) and a Western Digital external hard drive (which I also unplugged and disabled during the last attempt). [code]
View 9 Replies View RelatedAbout a week or so ago we had a big storm that knocked the power out a few times... my computer rebooted each time and after the second time Kaspersky detected a "memory mode kernal" or something like that (I accidentally deleted it from the list) and stated it had the same pattern as Klogger or something like that. I thought it was odd but after those restarts programs started to open slower on my computer than normal and sometimes I could see at the top of the program it would say 'program not responding' or something along those lines. This has mostly happened with Furcadia and Firefox but other programs like Adobe Elements come up slower than normal and even Windows 7 sticky notes come up slower.So what I have done was rebooted in safe mode and ran scans with both Malwarebytes and Kaspersky (with no problems to report as far as malware/viruses), ran CClearner, then ran defraggler (in normal windows). The problems seem to have gotten worse so I did a Memtest86 scan to see if it was my memory... no errors were shown (Memtest86 was ran after the most recent update to windows). So I still have some of the problems but for some things not as bad or just about the same as before. However, with my last reboot my computer had stalling problems.. it was trying to install the drivers for my new keyboard and load everything else (including NVIDIA System Monitor, Internet connection, Kaspersky, adobe reader update message, and windows action center [maybe something else too, I closed some of that stuff afterwards]).
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 945 Processor, AMD64 Family 16 Model 4 Stepping 2
Processor Count: 4
RAM: 10237 Mb
Graphics Card: NVIDIA GeForce GTX 465, 1024 Mb
Hard Drives: C: Total - 343296 MB, Free - 276222 MB; E: Total - 476937 MB, Free - 445652 MB;
Motherboard: Gigabyte Technology Co., Ltd., GA-MA785GM-US2H
Antivirus: Kaspersky Internet Security, Updated and Enabled
I am trying to re-image a laptop but both with a USB or a CD when it is loading up the install it just gets stuck with the loading graphic just going and going and going....I've replaced the hard drive on this laptop already, but I've used the same CD and USB to re-image other PC's.
View 2 Replies View RelatedFor the past month, every time windows update automatically reboots my computer to finish the updating process, the computer shuts down, fades to black, but then something curious happens. Instead of the BIOS coming up, the screen remains black, and every single fan in my system (GPU, CPU, and 3 other case fans) spin up to full speed and remain there, with the pc never rebooting. I thought this was a BIOS issue, so I updated my BIOS, but this did not fix the issue. All my drivers are updated, and there are no yellow exclamation marks beside any items in Device Manager. My system is running 64 Bit Windows 7 Ultimate, SP1.
View 2 Replies View RelatedA custom RT7Lite disc was used and a lot of tweaking has been done, so the system is well in need of a fresh format. Unfortunately, this was planned for after the holidays, and as I was unprepared for this crash, it could take me longer to figure out what I need to transfer to a new install then it would to fix the current one.
System specs:
OS: Windows 7 Pro x64
CPU: Intel Q9550
Motherboard: Gigabyte EP45-DS4P
Memory: 8GB PC2-8000
Graphics Card: ATI HD4870 (PCIe/512MB)
System Drive: 2x Intel x25-V SSDs in RAID0 (via mainboard's ICH10R)
Network: Intel Gigabit CT PCIe card
Firewall: Outpost Pro
The current problem:
System passes POST, bootloader, "Windows is Starting" animation. USB devices initialize, and the mouse pointer appears. The screen remains black (no background, login dialog, accessibility/power buttons, etc.) indefinitely. The mouse still moves and NumLock can be toggled, so the system has not halted - it just doesn't get any further than that. After 15 minutes power-saving kicks in and the display goes to sleep - Moving the mouse or pressing a key turns it back on again as though everything is normal, but it's still stuck at the black screen.Events leading up to this:I have been using a PCIe JMicron-based SATA card with a broken eSATA port, and I recently got an ASM1061-based SATA 6Gbps card to replace it. This new card is PCIe 2.0 and my motherboard only has two 2.0 slots - the x16 and x8 slots meant for video - so I was testing what difference it made running my gfx card in x8 mode. I decided running it this way was OK, so I started tweaking the SATA card. I had seen reports that using the generic Microsoft driver with this chipset was hugely detrimental to write performance, so naturally I tried to install the newest ASM one. This didn't work, as Windows told me "this location does not contain information about your hardware". I resorted to using the driver's installer program, which ran perfectly - but Windows kept using its own driver anyway.
Finally, I decided to try the older version of the ASM driver. This installed properly and the device was no longer listed as a generic ATA controller. On a hunch, I tried updating the driver again (without rebooting) to the newest driver, and Windows accepted it with no complaint this time. However, my firewall (Outpost) asked me whether I wanted to allow direct disk access to an uncertified/??? driver. I affirmed this as it was intended. It's worth mentioning that Outpost was being a nuisance when I was testing PCIe slots, as it wiped its configuration file each time I moved my NIC. This meant it lost all the rules regarding which system components were allowed to do what, and had me confirm each one.
I then rebooted to MS-DOS on a USB stick to update the SATA card's firmware. I restarted into Windows several times without issue, but the SATA card didn't show during POST or in the Device Manager. Turns out the uploader mislabelled a BIOS OROM module as the add-on card's firmware. Back in DOS, I flashed the correct/original file, but the card still didn't seem to work (no BIOS info page, still absent in Windows) so I went back and flashed it a third time. After that theBIOS splash screen re-appeared and it seemed like everything would be fine.
However, upon booting into Windows, I was now getting a consistent BSOD: STOP 0x00000024 0x0000000000190494 (I only have the first two numbers, which I googled on my phone out of curiosity). I rebooted to safe mode and the same BSOD came up after CLASSPNP.SYS was listed. At this point I inserted my Windows DVD and ran the Startup Repair function, which took a while but completed successfully. I checked the log after it was done and the only reported issue was that the 100MB System Reserved partition was "corrupt". After restarting, the BSOD is gone but I now have this black screen/no login issue.
Things I have tried:
-Pretended the login screen was there (entered password and pressed Enter) in case it was a graphical glitch.
-System restore is disabled so I can't use that to revert whatever caused this.
-Tried booting in each of Windows' alternate modes (VGA, Safe, Safe w/LAN, Safe w/CMD, Last Known Good, etc.), problem persists.
-Unplugged secondary display in case it was drawing stuff on the wrong monitor.
-Shuffled the expansion cards back to where they were when the problem started, tried alternate locations, booted with all cards removed.
-Opened a command line window from the Windows 7 DVD and ran SFC and scandisk. SFC reported there were several errors that could not be repaired, however this was also the case several weeks ago when I used SFC to troubleshoot an application. I'm fairly certain this can be blamed on the RT7lite'd install source.
-Booted into an old install of Vista x64 Ultimate on another drive, and replaced all instances of the ASM drivers with the older version. No change. Went back into Vista and renamed the driver files - no change.
Brainstorming:
-Non-destructive "Upgrade" install over existing version Has to be done from within Windows 7. Tried initializing this from Vista, but it seems it can only be installed over the currently active partition (and can't be done anyway because Ultimate trumps Professional.)
-This xbootmgr tutorial helped me narrow the timing of the problem down, it seems to be happening in the SMSSInit phase of MainPathBoot... Knowing this hasn't really helped me so far and it appears xbootmgr has to be initialized from the OS being traced, so I'm not sure if I can even use this tool.
-The automatic Startup Repair script (on the installation disc) reports that the system booted successfully. Running SFC without the /offwindir and /offbootdir switches reports that a system repair is pending. The bootloader lists the OS as "Windows 7 (recovered)"
My laptop has been backing up once a week fine (except for an error about a missing file that is on the target drive, not the backup drive) for months. In the past few days, it has suddenly failed with repeated attempts to backup, it always stalls at 57% while creating a system image. I've tried a clean boot, same results. I'm backing up to a network drive (USB hard drive attached to the router), 274GB free of 458 total, and the total backup size has been pretty small as no heavy data is kept on the computer.
Lenovo SL510
Windows 7 Professional
I have Windows 7 home and have run into a bit of an issue. I have a program on my computer that runs through the internet. At my home, it connects fine and I am able to run it without any issues, but I go to school and connect to their WiFi and it stalls on the connecting prompt. Everything else I run and the internet works fine, I have re-installed the program and made sure it wasn't blocked from public access on firewall.
View 1 Replies View RelatedAfter my computer was infected with virus but i got it removed with my anti virus. However after that incident some of my files won't open such as internet explorer, fire fox and some other files. when I try to click on these files it either gave me the message " no such interface supported" or nothing happen at all.
View 2 Replies View RelatedSoo its an Acer travelmate 4000 laptop, 1.6Ghz, 2gig ram, clean hard drive with two partitions , primary is 30 gig , secondary 120 gig.Windows 7 home prem OEM 32 bit It gets through the first part of the install (up to the first restart) then goes on to the screen shown in part 9 of the clean install guide, highlighting the "completing installation" message Clean Install Windows 7 then stops with the progress bar about 3/2rds of the way. The drive light flashes occasionally, but otherwise nothing,I formatted and partitioned the drive in another machine.
View 9 Replies View RelatedMy computer specs:[CODE]I installed windows 7 ultimate 64bit on the hard drive with a different computer. But when I connect it to this, it freezes and stalls at the windows 7 loading/logo screen, and restarts.It is frusrating because i cannot use the computer
View 5 Replies View RelatedMy game stalls when the screen goes white and an exclamation mark appears in the windows 7.
View 2 Replies View RelatedWhen I have firefox open as it seems, is when the problem arises. My computer will stall for 10-20 seconds making it completely unusable for that time frame, then it will come back. I upgraded FireFox to 15 (Beta2) I removed Adobe Flash (latest version) and installed it again, the problem continues. I did a memory test, because I have had a BSOD roughly twice in the past 1.5 weeks, the memory results were good. I did research on Adobe Flash and found that there are problems with the latest version, and sometimes a Adobe Flash app on a web site will crash. When I've had no web pages open in FireFox, it will happen as well ? I can't verify if I've had this problem when FireFox is closed or not as there wasn't many times in which I didn't have FireFox open whether minimized or the window open.
View 6 Replies View RelatedI have an ASUS laptop which used to have a recovery partition. I used a function to make recovery DVDs and proceeded to format the partition.Well now Windows won't boot. I attempted to use my recovery DVDs but after taking 10-15 minutes to boot it loads to a screen with a graphic (wallpaper) and stays there.It doesn't tell me to load the next disk, it doesn't give me any kind of menu, does not accept any kind of input (including ctrl-alt-del).
View 1 Replies View RelatedI am wondering if it is possible to turn off the MDI on the Windoes 7 task bar? When I have an application like Photoshop open and loads of documents open they all appear in the TOC. If you want to jump between apps quickly via alt-tab you can't because you have to tab through all the documents. Anyone know where the setting is to turn it off? Ideally I'd like to have some button on the desktop perhaps that will turn it on and off depending on the user and there preference.
View 6 Replies View RelatedI will be the first to admit that when it comes to drivers etc, I'm not an authority or really a person with a great deal of knowledge etc.
I have a Lexmark x342n All in One printer (print/copy/fax) and have not used it for quite some time as I just use the university printers. However with university being on holidays I was hoping to use the scanner however, now that I have Windows 7 (I used to use Windows XP) everything but the Scanner Interface has a driver for it when I plugged it in.
I have tried on the Lexmark site and used the drivers there however these all create a new printer in my control panel -> printers area that does not print at all, yet the printer that appears in the same area when Windows 7 automatically installed drivers upon plugin will print but not scan. When I try and find a driver for the Scanner Interface it just says that "device driver did not install properly"
Can you really speed up Windows by simplifying the Windows7 / Vista Interface? If so what would you need to do make the entire windows have a bland, Windows95 look ?
View 5 Replies View RelatedI've done a search for issue and found none. I have a 2 Terabyte Seagate USB drive.When I try to boot with this USB drive connected to computer the POST hangs. Once I remove the USB drive the system boots as normal. My system also has a USB RF Transceiver for the keyboard and mouse. It causes no problem though just the drive.
View 9 Replies View RelatedMy little netbook has started to stall for several minutes on boot. It seems to be related to the network setting or adaptor. I am not really sure how to log this, or diagnose. Nothing shows up in the basic troubleshooting etc. Do not know what info is needed. It works fine in safe mode btw.
View 1 Replies View RelatedI can't seem to figure out what's going on with connectify. No matter what computer or wifi adapter I use, connectify seems to just stall and stop working. I have waited for upgrades to be released and it still does the same thing.
View 9 Replies View Relateddell has informed me that my problem with my PC Is that windows 7 can't reconize the local network interface driver and told me that it's a software issue. I reinstalled the local network interface driver from the original cd that came with the PC and 2x's restored the computer to another time and then restored it back to the factory settings-with a Dell tech on the phone- nothing helped. This problem started one morning when lighting was felt/heard very close to our home and in fact burned out our verizon moden/box that Verizon replaced. From this point I wasn't able to go on line because there was no local network avail for verizon to connect to is how I understand it.
View 9 Replies View RelatedWhen I do a "restart", on the computer screen I could see "log out", a few seconds later, "shutdown." At this point, the system stalls at "shutdown." I waiting for over 5 minutes, and it was still stalled at "shutdown." To continue working with my computer, at the ""Shut down stall", I remove the power cord from my computer. About a minute later, I reconnect my power cord and click the power button. After that there is no problem. Except when I do a "Restart."
View 3 Replies View RelatedFor the past few months I've been having an issue where every 15-30 minutes my laptop will "stall" while browsing the web. I'll get a "waiting for [URL], etc message at the bottom left corner of the browser when it's stalling until it eventually times out and tells me it can't load the page.This issue occurs with every browser I try (IE, Chrome, Firefox). After a couple minutes, everything comes back to normal and I can continue wasting time on the internet until the next hiccup.
My set up is:
A Gateway NV57H58U Intel Core i5-2430M
Windows 7
Comcast digital cable
A Belkin Wireless router
A PS3
At first I assumed it was the router since it's a couple years old and was cheap when I bought it back then.The only thing that makes me think differently is that when I'm using the PS3 I never experience a break in connection. I can play a game online for 3-4 hours without any crashes or stutters.Also, while the internet is stalling out there is never a disconnect from the router - it always says it's connected and the signal strength is always "Excellent."
since I have installed windows7 it seems I have lots of errors trying to watch streaming on my laptop I noticed mass controller explanation point next to it does this effect streaming video?
View 2 Replies View Related