When attempting to write to any USB drive I have connected (including a 1GB USB key and a 1TB Eagle Consus S-ATA Raid0) I initially see the transfer going very quickly as Windows 7 caches the transfer. The speed initially goes to 60MB/s and then the bar stops moving. If I wait, the transfer never completes with a 1GB test file.
I cannot cancel the transfer, since it says Cancelling but never completes. Only a reboot or disconnecting my drive stops the transfer process. While attempting to transfer, any attempt to read from the drive stalls as well.
Read speed is normal. I can access files on the drive, and copy from the USB -> Windows 7 at full speed.
Here are the things I have done to fix the problem:
1) Set the drive to Performance Mode to enable write caching.
2) Uninstalled and re-installed the USB Root Controller and Intel USB Controller devices.
3) Upgraded to the latest Intel Device Drivers.
4) Ensured that my USB ports are 2.0, and that I am connected to the rear powered USB outlets.
5) Installed the Windows 7 hotfix intended for NVIDIA chipsets with 4GB RAM (does not apply to me, but tried anyways).
6) Tried formatting in 16K block sizes instead of 4K or 8K.
When I connect either USB device to my Macbook Pro, with NTFS drivers installed, my read and write speed are normal. For that reason, I know that the problem is not with my USB drives.
Tonite I will try an Ubuntu live CD to see if I can get full speed write with the exact same hardware that Windows 7 is using, to rule out that this is somehow a hardware issue.
Have 4 HDDs mounted in case. 3 of them are fine. The WDC W20EADS tests at an average write speed of 1MB/s, read is 80MB/s. Every now and then it comes right and the write speed is also around 80MB/s.
I have 4gb and 16gb kingston DT 101 usb....both had slow read & write speeds on fat32(defulat format)..
-write speed 4-6mb/sec
-read speed 25mb/sec appx
When i format it to NTFS, it writes initially at 100mb/s and then suddenly slows down to appx 15-20mb/s... and sometimes it gets stuck somwhere in the middle or on 99% and when i cancel it it start cancelling but doesnt end up, and end ups by removing usb or by logging off... when i copy from usb to harddisk in ntfs format, its working f9...
(I have dell inspiron n5520 core i5, 4gb ram, with win 7 ultimate 64bit... my laptop has usb 3.0 ports (all 4 ports).... i have updated drivers and windows... i have also set my usb to better performance from device manager... there is no problem sign in device manager)
I'm getting a message when shutting down Windows 7 that only appeares on screen for a second before windows shuts down. I had this problem with another version of windows, but I can't remember what I did to fix it.I also have to use the F10 key at startup to boot to the HDD with the OS on it. Can anyone tell me how to slow the screen down or pause it so I can read the messageThere may also be a problem in the registry that will not let the OS find and read from the HDD. I'm getting a read error, but can't remember the exact wordingy OS is on an SSD so all I have to do is hit Enter to startup.
What's the best type of DVD to use for read-only and read/write applications? I'm a little out-of-date on this, haven't bought any in awhile. I remember things like DVD-R/RW and DVD+RW and such. I have a new machine running Win7, and an older laptop running XP.
My desk top used to be what I considered very fast and now same computer alot slower.If it is comming out of an idle mode it will take at least 3 minutes to load a web page. The hard drive is working very hard, it is always running and the light blinking sometimes when not even being used.After being used for 5 min. or so the web pages do load faster but not as fast as they should.Sometimes I get a I.E. not responding message. It's almost like the hard drive is checking something or doing some other work at the same time.I have to the best of my ability cleared out old files and cleaned up what I can. The hard drive is maybe 25% full.
Specs: Dell studio XPS Intell 2.67 GHZ Ram 3. GB 64 Bit
I am running Kaspersky anti viris and have run the scan more than once, it says no problems.
So today my friend and I, who live in the same country, was downloading this file.It was around 6GB, which is irrelevant, but yea. It was from the same site, we have the same internet, yet he was downloading with 2.6MB/s while I was downloading with 1.338MB/s and it stayed like that for the remaining 40 minutes. Didn't even move at one point, while his went from 2.1 to 2.6 over 10 minutes. Worth noting, we use the same ISP, he only have 25/2 while I have 50/5, and I could easily download 2 files with the exact same speed (1.338MB/s each but not 1 with 2.6MB/s or more.There's also a client downloader, for this game, where he again got 2.6+ whereas mine always stayed at an amazing 80-180kb/s. I tried disabling anti virus, firewall, Malwarebytes, nothing changed it. I know you're thinking it's just the seeds or site that is limited to an x number of download speed, but it really can't be the case in this. It happens with every site I try. It's always at 1.3xMB/s and never moves regardless of how good it is.
I honestly don't remember, but I don't think this happens when it's a .torrent file, using programs like uTorrent with good p2p. It happens in all browsers, and apparently game client downloaders.I can download 5 different downloads at 1.3xMB/s using all of my available internet, but when it comes to a single file, it for some reason, is impossibleI'm not complaining about the download speed, but it just seems like there's something wrong. My downloads also have a habit of failing in chrome after a few minutes, for no reason. That only happens from some sources though.
After installing Windows 7 Pro and populating my HD with the normal games and programs I usually run I decided to test my connection speed on speedtest.net I was shocked to see a barley got even 4Mbps/down and .67 up.My Connecton is usually 23Mbps down and change (I pay for 24) and 4 Mbps up. So I ran the speed test with my laptop, sure enough it was running at normal speed but my new build is not.I tried internet connection optimize in System Mechanic, and that did not have any affect on performance.
I can't read or write discs. I'm using Windows Media Player to burn some music to a CD and it gets to 30% on the second track and the disc stops spinning and I get an error saying the drive is busy. I can erase the discs, but I can't burn them or read them.
There is as far as I can see, no errors on the disc drive itself.
OK so since I have installed a fresh copy of Windows 7 on this computer ( it is the first operating system installed on it) I can not write any DVDs .A strange fact is that I can write and read CDs and also read DVDs, but not every time.I got an original CD Album and it's still not recognized by the PC for example, and this happens to many audio CDs.I tried many registry tricks and stuff like that but in vain.The computer is new, bought it one month ago. DVD+RW - Sony Optiaric AD-7260SI also tired to resolve the problem with FixIt but it was also useless.I kept getting the message: "The disc in drive [E:] is not detected, or is not supported"
I have recently installed 7 and made my Vista partition visible. However, I am unable to write to the partition. Ex) I am able to view a text file on the Vista partition while running 7, but I am not able to modify the text file. Etc with other files. Does anyone have a solution to this?
I'm trying to write a request to COM2 and capture the answer. My device is 19200 baud 8/1 non parity.Using a freeware terminal called termite I can send the hex instruction and receive the answer, as verified in HHD serial monitor.My batch file looks like this: Code: MODE COM2: baud=19200 parity=N data=8 stop=1 to=offTYPE request.txt>COM2COPY COM2 text.txt where request.txt contains my request.HHD sees the request being written, but the device does not respond.
I have 2 drives (connected one at a time to try and sort this issue) SONY AD-7260S and a LITE-ON
Now from upgarding to XP to 7 I had no issues until now... When inserting Disc (Blank or Data Files) the DVD Drive will hang and not ask what to do with the Disk and when I try to Burn the disc it will say cannot write to drive or just sit there doing nothing
Both these drives worked flawlessly with XP and only way to get the drive to recognise half the time with Windows 7 is to restart PC to either get it to show in Device Manager or press eject when booting to get the disk inside out.
Both drives are Sata and are only a few months old (not burned much and work exceeelnet on another xp machine)
How can I reorganize / read / write / move / unlock and basically do whatever the heck I want with my files and folders in Win7? It is my computer, I am the only user, and yet when I create a folder, the stupid Windows locks it and won't let me save stuff in the folder, or access stuff in the folder, etc, etc. What do I have to do to get back control of my computer?
i'm having this problem lately with my burner it won't write, but when I burn a cd it burns fine. its a (tsstcorp cddvdw ts-L633c) i tried using cyberlink its burn for a while but after verifiying it...it fails and pop-out the dvd and there's no burn mark on the dvd. i also tried using this software nero and magiciso same problem it ejects the dvd. I also tried using different dvd, dvd-r and dvd+r nothings change same problem occurs... i tried uninstalling,update, delete the upper, burn it with the lowest speed, still it won't burn. i'm using window 7 home basic.
I dont really trust what they say because when I checked the review.. its not that good.. so finally i plan to ask from this forum instead, hoping to get answers..What are the best VCD burning program you guys ever used? I want the one that can accept all types of video and convert it on its own and burn it... Easy to use is a must...I have tried the latest Nero but its not good at converting Mp4 files... because when i burned them... the video moves so fast as if they are fast forwarded but the voice lagg behind... there goes my CD wasted...And i have tried Ashampoo as well but they did not recognize mp4 files, only mpeg... i have video converter but what i want is one program to do it all.. drag the video to the program and all i have to do is wait til its done..hoping to get your replies soon.. any software will do... i prefer the simplest and easy to use.. it can be free or paid.. but if paid make sure its worth it
On a 4-year old laptop running Windows 7, I've been burning, in Windows Explorer,Verbatim brand DVD-DL discs rated at 8x, on an external USB Panasonic UJ-220 blu-ray burner that can burn DVD-DL at 2.4x, at 2.4x (the only burn speed choice that Windows Explorer offers), with no problem.Now I'm trying to do the same, with the same external USB burner and with discs from the same cake, on a 1-year old desktop, also running Windows 7. Both the laptop and the desktop are running 64-bit Windows 7[CODE]
For the past few days, if not a week now, I've noticed that when I switch to Basic theme for RAM intesive programs like Adobe After Effects, Windows is quite slow, almost running as though my laptop is 1GB not 2GB RAM.Though when I switch to Aero theme, Windows is only slightly slower with Adobe After Effects running. My laptop is Compaq Presario CQ56, 2GB shared graphics and I can't explain why the Basic theme is running slow whereas Aero is responding faster, so much so, programs tend to stop responding more frequently on Basic. I have run MSE, MBAM and SAS (MSE realtime, others are standalone mode) and found no viruses and I update them all either daily or every two days. I only have Realtek Audio and MSE on Startup so I can't figure out why this happening!
I will try to be as descriptive as possible. I currently have GoWifi to access my internet (my room mate has it to)But for the past 4 days my computer has been running horribly slow. I can't use a enthernet cable becuase "Gowifi" is only wireless. I use google chrome most of the time, but the internet is slow on chrome and explorer. I have tried the "ipconfig /release then ipconfig /renew" method. I have also tried to Reset WINSOCK, Reset IPv4, Reset IPv6, and then restarted my computer but still did not do the trick. I have tried various things from forums on other sites and this site but it still is not doing the trick.Is there Anything you guys could tell me that could fix my problem? And i do have a windows 7 computer.
My problem is slow usb transfer rate - at first it start off real good (70-80 mb/s then within 10 sec it drops down to 3 and even 1 mb/s). 1.5 mb file gets into my flash drive in 10 min or so. Now I've formatted flash drives, no change. Write-caching enabled, "best performance" for flash drives enabled... Tried on a Lap-Top - transfer rate is not so high, but stable all the time - 15-12 mb/s. Remote Differential Compression disabled. Transfer rate within the hard drives in my computer is OK (I got 2). I don't know if it's the Windows 7 problem or the motherboard problem or hard drives config problem.
Here is my info: Windows 7 Ultimate 64 bit HDD's: Samsung 500bg and ST 320 bg, both 16 mb 7200 mobo - GA-770T-D3L, v.1. RAM - 8gb Phenom IIx6
i need to earse all my pics so i can reuse the memorey card and i cant ckuz of that write protection its saids to go to the k driver and something about the volume to remove the volume from driver k what
