Burner Won't Read And Write Windows 7 Home Premium?
Nov 1, 2011
i'm having this problem lately with my burner it won't write, but when I burn a cd it burns fine. its a (tsstcorp cddvdw ts-L633c) i tried using cyberlink its burn for a while but after verifiying it...it fails and pop-out the dvd and there's no burn mark on the dvd. i also tried using this software nero and magiciso same problem it ejects the dvd. I also tried using different dvd, dvd-r and dvd+r nothings change same problem occurs... i tried uninstalling,update, delete the upper, burn it with the lowest speed, still it won't burn. i'm using window 7 home basic.
Is there a way to easily downgrade to Windows 7 32 bit without having the 32-bit disc? Maybe a program to do all the bitchwork while I basically sit back?
i cant get the computer to reconize the burner it will show a green light open and close and i can hear it turning but it isnt being reconized by my computer it did work one time and hasnt done it since
Samsung DVD writer [slim external] model no. SE- S084C. OS is win7 starter after connecting the drive through USB port, PnP installs hardware and when i go to "computer" it "sees" the drive (until i insert a disk and close the drawer) when i insert the installation disk that came with my unit, the drive is unable to read the disk. it just sits there making whirling noises, the green light blinks off and on and the drive icon that normally appears when i open "computer", disappears whenever i close the drive with a disk in it. the drive icon will occassionaly appear briefly and then disappear again. is this a driver/firmware issue or a "win7 does not support " issue.
What's the best type of DVD to use for read-only and read/write applications? I'm a little out-of-date on this, haven't bought any in awhile. I remember things like DVD-R/RW and DVD+RW and such. I have a new machine running Win7, and an older laptop running XP.
while installing 7 H.P. it gets to completing installation then freezes up after computer reboots a warning message appears stating windows 7 has failed to install and resume after reboot, and then the same warning message appears.
I tried the roll back installation option and a message flashes on and off to quickly to read. and Vista will not come up to start over.
I successfully bought the upgrade version of Windows 7 Home Premium N, downloaded and extracted it and now I want to install it.
When I choose UPDATE in the intallation dialog it tells me that I cannot upgrade from Vista Home Premium to Windows 7 Home Premium ???
Every website from Windows and other people tells me that it IS possible and even the Windows 7 Update Advisor told me that I should not encounter any problems upgrading.
Has anyone of you yet encountered upgrading problems of compatible Vista/7 versions?
Or any other idea what I can do to solve the problem?!
I know that I can make a clean intall of 7, but this would be a pain..
Yesterday I was messing around on my brand-new laptop, and I was stupid enough to try a keygen to get Ultimate (I had HP). Surprising. It worked but the copy wasn't genuine obviously. So then I rebooted, pressed F8 at boot. An ran Toshibas recovery to try to get the computer to its out of box state. I got stuck at initializomg (either that or I was impaptient) so I turned off the laptop. Then when I truer to boot I got bootmgr is missing. I have an old vista Hp disk so I installed that for the time being. So my question is, how do I get it back to the original state? I do t have any important data or anything.
I have 2 drives (connected one at a time to try and sort this issue) SONY AD-7260S and a LITE-ON
Now from upgarding to XP to 7 I had no issues until now... When inserting Disc (Blank or Data Files) the DVD Drive will hang and not ask what to do with the Disk and when I try to Burn the disc it will say cannot write to drive or just sit there doing nothing
Both these drives worked flawlessly with XP and only way to get the drive to recognise half the time with Windows 7 is to restart PC to either get it to show in Device Manager or press eject when booting to get the disk inside out.
Both drives are Sata and are only a few months old (not burned much and work exceeelnet on another xp machine)
Recently ive decided that Well i should upgrade this computer. give it a bit of ..well style.But since ive upgraded to Windows 7 there has been no sound whatsoever. Ive downloaded countless driver programs which tell you what sound card you have and not one has detected it. IVE ALSO downloaded drivers for the Windows 7 version of my sound (Realtek AC97) and ran windows updates and NONE worked. ive ran the troubleshooter on the sound thing...STILL not detecting any sound card. i tried changing the audio in BIOS from auto - enabled....nothing.
I bought a notebook preinstalled Windows 7 Home Premium 64 bit, of course, licensed.But I found it incompatible with some software. So I decided to use 32 bit.I want to format the whole drive and install 32 bit version of W7HP.
The original OS was Windows XP 32bit SP3. I upgraded this system to Windows Vista Home Premium 32bit SP2 with no issues.
I then went to upgrade the system to Windows 7 Premium. I chose the "Upgrade" install and not the "Clean" install. I've checked the updater to confirm that all my system information was adequate. I uninstalled the ATI Catalyst Controller, iTunes, etc. that it wanted me to. Oddly enough, the ATI Catalyst Controller was the most recent driver that supports Windows 7.
I checked online to see if the hardware was all supported by Windows 7. The Sapphire Vapor-X video card was not compatible or compatible... it simply wasn't on the list of either. The X-Fi Extreme Gamer said it was NOT compatible... yet, I had a driver for Windows 7 and the Windows 7 Application checker said that my sound card was ready for Windows 7... thus a discrepency.
I went on with the installation. I get to the last step where it resets the computer at 62% and I get a BSOD for about 1/3 of a second. It goes by too quickly for me to capture it. It then restarts the computer instantly with the result of "Upgrade was not completed successfully. Restoring prior OS yadda yadda". I've gone through this about 5 times now trying different things.. keeping the Catalyst controller installed, uninstalling the video card, removing the sound card, etc. Nothing seems to work.
It was recommended to me that I do a clean install... however, I have read that many others have done a clean install and theirs STILL doesn't get past the 62%.
Is it my hardware? Do I need to buy MORE hardware now that 7 is out that is on the compatible list?
I can't read or write discs. I'm using Windows Media Player to burn some music to a CD and it gets to 30% on the second track and the disc stops spinning and I get an error saying the drive is busy. I can erase the discs, but I can't burn them or read them.
There is as far as I can see, no errors on the disc drive itself.
I'm french and i already owns Seven Home Premium N (Full french DVD version with a key).I recently bought Seven Home Premium on Amazon UK (Full non N version, the E uropeen version). This version is entirely in English.As you can see, my english is not so good to have a full non-french system. I would like to use my own french Home Premium N to install my Premium english key.Anyone know if it it possible to enter a Premium key with a Premium N DVD ?
i already owns Seven Home Premium N (Full french DVD version with a key).I recently bought Seven Home Premium on Amazon UK (Full non N version, the E uropeen version). This version is entirely in English.As you can see, my english is not so good to have a full non-french system. I would like to use my own french Home Premium N to install my Premium english key.
OK so since I have installed a fresh copy of Windows 7 on this computer ( it is the first operating system installed on it) I can not write any DVDs .A strange fact is that I can write and read CDs and also read DVDs, but not every time.I got an original CD Album and it's still not recognized by the PC for example, and this happens to many audio CDs.I tried many registry tricks and stuff like that but in vain.The computer is new, bought it one month ago. DVD+RW - Sony Optiaric AD-7260SI also tired to resolve the problem with FixIt but it was also useless.I kept getting the message: "The disc in drive [E:] is not detected, or is not supported"
Have 4 HDDs mounted in case. 3 of them are fine. The WDC W20EADS tests at an average write speed of 1MB/s, read is 80MB/s. Every now and then it comes right and the write speed is also around 80MB/s.
I have 4gb and 16gb kingston DT 101 usb....both had slow read & write speeds on fat32(defulat format)..
-write speed 4-6mb/sec
-read speed 25mb/sec appx
When i format it to NTFS, it writes initially at 100mb/s and then suddenly slows down to appx 15-20mb/s... and sometimes it gets stuck somwhere in the middle or on 99% and when i cancel it it start cancelling but doesnt end up, and end ups by removing usb or by logging off... when i copy from usb to harddisk in ntfs format, its working f9...
(I have dell inspiron n5520 core i5, 4gb ram, with win 7 ultimate 64bit... my laptop has usb 3.0 ports (all 4 ports).... i have updated drivers and windows... i have also set my usb to better performance from device manager... there is no problem sign in device manager)
When attempting to write to any USB drive I have connected (including a 1GB USB key and a 1TB Eagle Consus S-ATA Raid0) I initially see the transfer going very quickly as Windows 7 caches the transfer. The speed initially goes to 60MB/s and then the bar stops moving. If I wait, the transfer never completes with a 1GB test file.
I cannot cancel the transfer, since it says Cancelling but never completes. Only a reboot or disconnecting my drive stops the transfer process. While attempting to transfer, any attempt to read from the drive stalls as well.
Read speed is normal. I can access files on the drive, and copy from the USB -> Windows 7 at full speed.
Here are the things I have done to fix the problem:
1) Set the drive to Performance Mode to enable write caching. 2) Uninstalled and re-installed the USB Root Controller and Intel USB Controller devices. 3) Upgraded to the latest Intel Device Drivers. 4) Ensured that my USB ports are 2.0, and that I am connected to the rear powered USB outlets. 5) Installed the Windows 7 hotfix intended for NVIDIA chipsets with 4GB RAM (does not apply to me, but tried anyways). 6) Tried formatting in 16K block sizes instead of 4K or 8K.
When I connect either USB device to my Macbook Pro, with NTFS drivers installed, my read and write speed are normal. For that reason, I know that the problem is not with my USB drives.
Tonite I will try an Ubuntu live CD to see if I can get full speed write with the exact same hardware that Windows 7 is using, to rule out that this is somehow a hardware issue.
I have recently installed 7 and made my Vista partition visible. However, I am unable to write to the partition. Ex) I am able to view a text file on the Vista partition while running 7, but I am not able to modify the text file. Etc with other files. Does anyone have a solution to this?
I'm trying to write a request to COM2 and capture the answer. My device is 19200 baud 8/1 non parity.Using a freeware terminal called termite I can send the hex instruction and receive the answer, as verified in HHD serial monitor.My batch file looks like this: Code: MODE COM2: baud=19200 parity=N data=8 stop=1 to=offTYPE request.txt>COM2COPY COM2 text.txt where request.txt contains my request.HHD sees the request being written, but the device does not respond.
How can I reorganize / read / write / move / unlock and basically do whatever the heck I want with my files and folders in Win7? It is my computer, I am the only user, and yet when I create a folder, the stupid Windows locks it and won't let me save stuff in the folder, or access stuff in the folder, etc, etc. What do I have to do to get back control of my computer?
I have sort of a special case here. I purchased my HP laptop in Thailand, and much to my chagrin it came installed with Windows 7 Home Basic. In addition, the HP store which sold me the laptop installed 4gb of RAM neglecting to tell me that the 32bit version of 7 only supported up to 3. At any rate, I am hoping to upgrade to Windows 7 Home Premium, 64 Bit edition.But while there is a glut of information online about how to upgrade from Starter, there is little to nothing about Home Basic. Do I have to buy a full copy of 7 Home Premium 64 Bit? Can I buy an Anytime Upgrade that is meant for Starter and apply it to my computer?
Had Windows 7 home premium for around 2 months on a brand new desktop. Never had a single problem with it untill today. Turned it on as normal, got to the log in screen where i click on the required user. As the pc is only used by me I only have 1 user availiable. I click on it like normal but this time i get a message saying 'The user profile service service failed the logon' 'user profile cannot be loaded'. It then refreshes the page and returns me back to the logon page and if i press enter the same thing just keeps repeating itself. Other option on this page are the shutdown/sleep/restart option and a little box in the bottom left corner called ease of access with various options, but none that seem relevant to the situation.
I came to my laptop about five hours ago and have not been able to do anything with it since. I had it in hibernate and as I flicked the lid up it shut itself down - I assumed for updates. Nothing happened.I turned it on, started windows normally as it hadn't shut down properly and waited for the log on screen. It hung on "Please wait" for about five minutes with the circle going round and round and round, then nothing, just the home page no user no password no log on. I turned it off and turned it on again while Google'ing for answers. Seeing as I haven't been able to log in at all a lot of the answers I haven't been able to try, so far I have tried: to boot normally and end up with the hanging screen.booting safe mode, it loads files, finishes with windowssystem32DRIVERSCLASSPNP.SYS then restarts and I'm back to square one.booting in safe mode with networking and command prompt - same as above. F8, repair, system restore, tried all points with errors:System restore failed to extract the file (C:) from the restore point. An unspecified error occurred during system restore (0x8000ffff) [code]I downloaded Windows 7 about 18 months ago from a student offer while I was at university - I was sent a CD/DVD and put it somewhere very safe, so safe I don't even know where it is!If it is any help, I also hear a ticking noise from the laptop when it gets to the start up screen just as it begins to hang, it then stops and I end up having to turn it off or it restarts itself.
hey i have windows 7 home premium 32-bit, i also have 4GB RAM but only (2.93 GB usable). i have intel chipset 4 graphics .... what i would like to know is why my computer is not using all my RAM an can i use 1GB of my RAM as Video ram for games?
